共查询到20条相似文献，搜索用时 31 毫秒
1.
利用1965——1981年mb4.0的580个地震,研究了中、缅、印交界地区的地震空间分布特征,得到地震主要在阿萨姆块体周围及凹向块体的断裂带上成带或成群分布;在缅甸北部大约由20N到26N存在倾斜地震带,其倾向由南到北逐渐由东转向南东东,其倾角由30变为50;地震带厚度为20——30km;作了38个地震的机制解,机制解表明,在缅甸北部、阿萨姆块体及其相邻地区压力轴为北东方向且近于水平,反映了印度板块以北东方向挤压欧亚板块. 相似文献
2.
2012年6月24日宁蒗-盐源MS5.7地震,位于丽江-小金河断裂西北30km。区域范围内历史上地震频繁,为滇西北地震多发区。震区断裂构造复杂,主要发育NW向、NE向2组断裂,呈棋盘格式展布。经野外实地考察,震中附近发育NW向永宁断裂和NE向日古鲁-岩瓦断裂2条晚更新世活动断裂。永宁断裂由温泉断层、永宁断层和阿拉凹断层组成。在卫星影像上线性特征清晰,断层地貌明显。断裂对永宁、泸沽湖第四纪盆地具有严格的控制作用,沿线多处发育温泉。前所河的多条支流顺断层发育,八七—海衣角一带、日古鲁东山厝附近,多处河流右旋位错。阿拉凹一带断错T2阶地上更新统沉积,被错地层最新年龄(TL)为(21.19±1.80)ka,是一条以右旋走滑兼正断性质的晚更新世活动断层。日古鲁—岩瓦断裂对岩瓦、日古鲁、利家咀等古近纪、新近纪盆地和永宁第四纪盆地有着明显的控制作用,断错中更新世和上更新世地层。中挖都—利家咀一带,有多条小溪呈现出同步左旋位错特征。断裂在晚更新世有着明显的活动迹象,以左旋走滑运动为主。据震源机制解结果,此次地震为正断兼右旋走滑型地震,NW向节面产状与永宁断裂基本吻合,地震破裂型式与永宁断裂运动学特征一致。地震烈度长轴方向、Ⅷ度烈度异常点线性分布以及构造地裂缝方向均与永宁断裂走向一致。分析认为,永宁断裂为此次地震的发震构造。此外,1996年丽江7.0级地震、1976年中甸5.5级地震以及本次5.7级地震,均具有明显的正倾滑分量。这些地震多分布在哈巴雪山和玉龙雪山新构造隆起周缘。根据区域地形条件分析,该地区的正断层运动作用很可能与地形巨大反差引起的重力势能有关。 相似文献
3.
南迦巴瓦构造结周边地区主要断裂现今运动特征 总被引：3，自引：3，他引：0
本文基于南迦巴瓦构造结周边16个宽频带地震台的观测波形数据,对地震事件进行相关分析,使用MSDP软件进行多台定位,编制了研究区内的地震目录,并利用CAP方法获得了研究区内主要断裂带两侧10km范围内M 3.0以上地震的震源机制解,用于分析主要断裂带的现今运动特征。研究结果表明:研究区内的地震活动受主要断裂带的控制;墨脱断裂带现今运动主要为左旋逆冲运动;米林断裂带以左旋正断运动为主;嘉黎断裂带以右旋逆冲为主,兼有左旋和正断运动;阿帕龙断裂带以右旋逆冲运动为主;边坝-达木新生断裂带运动以右旋逆冲运动为主,兼有正断和左旋运动;各主要断裂带的现今运动特征与地质和GPS观测结果相同,表明南迦巴瓦构造结周边地区主要断裂带的现今运动主要受阿萨姆构造结俯冲作用的控制。 相似文献
4.
由于发生1906,1941,1946,1994和1999年的破坏性地震，对台南盆地的地震构造有了更全面的了解，并对台湾西南部的活动右旋走滑的义竹断裂有了新的看法. 曾熟知的梅山断裂和新化断裂不是独立的地震断裂，它们均属于义竹断裂的分段. 1994年9月16日，震中在台湾海峡、台南盆地边缘的地震，断层面接近东西向.此地震为台南盆地沉降历史过程中，右旋走滑断裂的活动剪裂所导致. 从1941年和1999年地震的主震和微震记录中发现，这些菱形分布的地震图像，象征走滑断裂双轨构造中的压缩区. 基于上述研究及其它资料表明义竹断裂是台湾西南部重要的构造活动带，并具有引发地震的可能性. 相似文献
5.
Introduction In the 20th century, there are 5 destructive earthquakes and their associated earthquake faults happened in the Tainan basin. They are the 1906 Chiayi earthquake and Meishan fault (Omori, 1907), the 1941 Chungpu earthquake and Ichu fault (LIN, et al, 1998), the 1946 Tainan earthquake and Hsinhua fault (ZHANG, et al, 1947), the 1994 Taiwan Strait earthquake and transtenssion zone of Ichu fault (KAO, WU, 1996), the 1999 Chiayi earthquake and the contractional strike-slip d… 相似文献
6.
震源机制解分类与川滇及邻近地区最新变形特征 总被引：5，自引：1，他引：4
以位错理论为依据探讨了地震分类的理论基础,利用美国哈佛大学1977—2008年的震源机制解资料,采用地震三角形分类法,研究了中国川滇及邻近地区震源机制解124例,从地壳脆性变形的角度分析了川滇次级块体的变形形式。结果表明:整体上川滇及邻区的走滑断层、逆冲断层和正断层具有明显的分区性特征,受青藏高原SE方向的挤压,沿着鲜水河断裂带、安宁河断裂带、则木河断裂带和小江断裂带产生了大的剪切位移和变形带;同时,受缅甸弧挤压和四川盆地的阻挡,在缅甸弧前端和龙门山断裂带等地形成了强烈的挤压区,在云南大部分区域形成了扇形剪切应力变形区;而沿鲜水河断裂带、安宁河断裂带、则木河断裂带和小江断裂带所产生的大的剪切位移和变形直接作用在红河断裂带上,造成红河断裂带呈右旋向SE方向错动,引起其后延金沙江断裂至丽江-小金河断裂之间形成大的应力拉张区,构成了现今川滇及邻区地壳变形的最新格局 相似文献
7.
Giuseppe Pasquale Raffaella De Matteis Annalisa Romeo Rosalba Maresca 《Journal of Seismology》2009,13(1):107-124
The goal of this study was to estimate the stress field acting in the Irpinia Region, an area of southern Italy that has been
struck in the past by destructive earthquakes and that is now characterized by low to moderate seismicity. The dataset are
records of 2,352 aftershocks following the last strong event: the 23 November 1980 earthquake (M 6.9). The earthquakes were
recorded at seven seismic stations, on average, and have been located using a three-dimensional (3D) P-wave velocity model
and a probabilistic, non-linear, global search technique. The use of a 3D velocity model yielded a more stable estimation
of take-off angles, a crucial parameter for focal mechanism computation. The earthquake focal mechanisms were computed from
the P-wave first-motion polarity data using the FPFIT algorithm. Fault plane solutions show mostly normal component faulting
(pure normal fault and normal fault with a strike-slip component). Only some fault plane solutions show strike-slip and reverse
faulting. The stress field is estimated using the method proposed by Michael (J Geophys Res 92:357–368, 1987a) by inverting selected focal mechanisms, and the results show that the Irpinia Region is subjected to a NE–SW extension with
horizontal σ
3 (plunge 0°, trend 230°) and subvertical σ
1 (plunge 80°, trend 320°), in agreement with the results derived from other stress indicators. 相似文献
8.
9.
选用国家地震台网和区域台网的初至波P波初动符号资料,采用下半球等面积投影,用格点尝试法计算了2009年中国大陆27次MS4.5级以上地震的震源机制解。根据Zoback[1]研究全球应力场时的分类标准,对断层面解类型进行了分类。结果表明:走滑型(SS)地震13次,逆断层为主兼走滑(TS)8次,逆断层(TF)2次,正断层为主兼走滑(NS)3次,正断层(NF)1次。主压应力轴P轴方位的优势分布具有明显的区域特征,除东北地区有稍微的偏移,其余地区都与当地的背景构造应力场基本一致。 相似文献
10.
中甸-大具断裂南东段位于哈巴和玉龙雪山北麓,属于川西北次级块体西南边界,断裂总体走向310°~320°,是一条重要的边界断裂。了解该断裂的活动性质、活动时代和滑动速率等对分析川西北次级块体运动,研究该断裂与玉龙雪山东麓断裂的交切关系等问题具有重要意义。文中基于1︰5万活动断层地质填图,对断裂沿线地层地貌、陡坎地貌、地表破裂、典型断层剖面以及河流阶地等进行了详细的研究。研究表明:1)中甸-大具断裂南东段按几何结构、断错地貌表现、断裂活动性可分为马家村—大具次级段和大具—大东次级段。2)通过野外地质调查发现,马家村—大具次级段断错了全新世冲洪积扇,形成了地表破裂,为全新世活动段;而大具—大东次级段虽然也断错了晚更新—全新世地层,但其断错规模及滑动速率均较小,由此认为其全新世以来活动较弱。3)通过分析断裂沿线断层陡坎、水平位错及地表破裂等地质地貌问题,认为马家村—大具次级段的活动性质为右旋走滑兼正断,其晚更新世以来的垂直滑动速率为0.4~0.8mm/a,水平滑动速率为1.5~2.4mm/a;大具—大东次级段以右旋走滑为主、正断为辅,其晚更新世晚期以来的垂直滑动速率为0.1mm/a。4)在大具盆地内发现的NW向地表破裂带的形成时代很年轻,不排除是1966年中甸6.4级地震或1996年丽江7.0级地震造成的地表破裂。 相似文献
11.
龙门山断裂带沿倾向和走向具有明显的分带性和分段性特征,通常以4条主干断裂为界将龙门山断裂带自西向东分为5条构造带,但是对沿走向的分段性特征仍未达成共识.本文利用四川区域地震台网记录的汶川地震后近10年的波形数据,采用全波形反演获取了龙门山断裂带1495个M≥3的震源机制解.通过“滑动窗”扫描方法提取不同地震类型的数量沿龙门山断裂带走向的变化曲线,据此将龙门山断裂带的震源区划分为S1—S9段.根据反演的震源机制解,进一步采用阻尼线性反演技术求取龙门山断裂带高分辨率的构造应力场信息,从地震类型、断面结构和构造应力场等角度探讨龙门山断裂带的分段性特征.结果表明:(1)地震类型存在明显的分段性特征.其中S1的逆冲型地震比例最高,S8的走滑型地震比例最高,S9的正断型地震比例最高.汶川地震后龙门山断裂带可能存在差异性断层调整运动,且余震晚期沿断裂带走向普遍存在应力的补充和协调,芦山地震的发生可能还对S2造成了应力扰动.汶川主震附近及余震区远端经历了更长的震后调整过程,且余震区远端S9具有更复杂、强度更高的震后调整过程.(2)断面结构存在明显的分段性特征.断面结构揭示汶川主震附近和余震区远端的隐伏断裂,以及虎牙断裂南端参与了汶川余震活动.断面倾角与走滑分量具有较好的一致性,在具有明显逆冲分量的分段断面倾角主要分布在50°~70°,而在具有明显走滑分量的分段断面倾角基本在60°以上,且断面倾角增大与汶川余震带宽度收缩变窄相吻合.(3)龙门山断裂带的应力环境非常复杂.σ1方向的分段性差异导致了汶川—芦山地震空区的地壳撕裂和地幔物质上涌、汶川主震附近和余震区远端的隐伏断裂活动以及虎牙断裂南端大量的逆冲型地震.结合构造应力场与大地测量资料认为,龙门山的隆升主要是受构造应力场作用下的上地壳缩短增厚所致. 相似文献
12.
13.
14.
Onur Tan Eleftheria E. Papadimitriou Zumer Pabucçu Vassilis Karakostas Ahmet Yörük Kostas Leptokaropoulos 《Acta Geophysica》2014,62(6):1283-1309
A detailed investigation of microseismicity and fault plane solutions are used to determine the current tectonic activity of the prominent zone of seismicity near Samos Island and Kusadasi Bay. The activation of fault populations in this complex strike-slip and normal faulting system was investigated by using several thousand accurate earthquake locations obtained by applying a double-difference location method and waveform cross-correlation, appropriate for areas with relatively small seismogenic structures. The fault plane solutions, determined by both moment tensor waveform inversions and P-wave first motion polarities, reveal a clear NS trending extension direction, for strike slip, oblique normal and normal faults. The geometry of each segment is quite simple and indicates planar dislocations gently dipping with an average dip of 40–45°, maintaining a constant dip through the entire seismogenic layer, down to 15 km depth. 相似文献
15.
GPS AND LEVELING CONSTRAINED CO-SEISMIC SOURCE AND SLIP DISTRIBUTION OF THE LUSHAN MS7.0 EARTHQUAKE ON 20 APRIL 2013 
下载免费PDF全文
下载免费PDF全文 Co-seismic deformation results calculated by the observations of GPS continuous sites and precise leveling are used as three-dimensional constraints for the deformation field of Lushan MS7.0 earthquake on 20 April 2013.The inversion of seismic source parameters are calculated based on the consideration of different value-taking schemes and fault models. Seven data type selection schemes, three fault models and two data coverage selection schemes are designed in order to discuss the effect of data selection and fault model selection on the inversion results.
The results show that the fault model using blind reverse fault for the inversion is superior to the model using the fault that ruptures from its upper boundary to the earth'surface, which may indicate that the Lushan earthquake fault is most likely a blind reverse fault; there are no obvious differences in the inversion results between the blind listric reverse fault models and the rectangle blind reverse fault models.
The best inversion result of Lushan earthquake seismic moment is MW6.7.And it also shows that the distribution of dislocations on the fault plane is concentrated in the range of 30km×30km, the northern flank of the seismogenic fault of Lushun earthquake is of dextral faulting and the southern flank of the fault is of sinistral faulting, the sinistral component is larger that dextral component, showing a wedge deformation mode. 相似文献
16.
Kamal Abdel-Rahman El-Sayed 《地震研究》2008,31(2):160-170
根据埃及Gasco天然气公司工程场地的现场调查资料、地震活动性和地震灾害评估结果,对该场地进行了评估.通过浅源地震波折射勘探,对8个地震剖面上的土壤和岩石的弹性动态常数进行了分析.场地地面模型包括两层,分析表明它们具有从中值到高值的弹性动态常数,说明场地有良好的土壤条件和基岩岩性.同时,我们搜集和分析了研究区周围150 km半径范围内的历史和仪器记录地震,从构造环境、地震活动性、地质构造和主要地震的断层面解等方面进行了研究,认为场地受4个震源区的影响:苏伊士中部海湾、开罗-苏伊士地区、开罗西南和Beni-Suef地区.我们采用地震活动性统计方法并结合专家判定,确定了这些震源区内最大地震的矩震级(MW).另外,依据场地峰值加速度(PGA)和反应谱,用随机方法对场地进行了地震灾害评估.4个震源区中,Beni-Suef地区距离工程场地最近,其PGA最大值为9.34cm/s2,但这个值很小,表明地震不会对工程场地产生破坏性影响.最后,我们还模拟了阻尼为1%、3%和5%时的伪加速度场地反应谱. 相似文献
17.
2012年11月20日在宁夏银川市永宁县与兴庆区交界处发生MS4.6地震,为了更好地了解此次地震的发震构造,首先采用Hypo2000绝对定位方法得到该地震的震中位置及余震分布;然后采用CAP方法反演了此次地震的震源机制解和震源深度. 反演结果表明,永宁MS4.6地震是一个带有少量逆冲分量的右旋走滑地震.该地震矩震级为MW4.3,最佳双力偶解为:节面Ⅰ走向11°,倾角74°,滑动角171°;节面Ⅱ走向103°,倾角81°,滑动角16°.最佳震源深度为8km左右.从该地震震中和震源机制解以及震源深度剖面分布来看,这次地震很可能发生在银川隐伏主断层西侧的次级断层上. 相似文献
18.
19.
20.
STUDY ON THE SEISMOGENIC FAULT AND DYNAMICS PARAME-TERS OF THE 2014 MS6.6 JINGGU EARTHQUAKE IN YUNNAN 下载免费PDF全文
下载免费PDF全文 On October 17, 2014, a MS6.6 earthquake occurred in Jinggu, Yunnan. The epicenter was located in the western branch of Wuliang Mountain, the northwest extension line of Puwen Fault. There are 2 faults in the surrounding area, one is a sinistral strike-slip and the other is the dextral. Two faults have mutual intersection with conjugate joints property to form a checkerboard faulting structure. The structure of the area of the focal region is complex. The present-day tectonic movement is strong, and the aftershock distribution indicates the faulting surface trending NNW. There is no obvious surface rupture related to the known fault in the epicenter, and there is a certain distance from the surface of the Puwen fault zone. Regional seismic activity is strong. In 1941, there were two over magnitude 7.0 earthquakes in the south of the epicenter of Jinggu County and Mengzhe Town. In 1988, two mainshock-aftershock type earthquakes occurred in Canglan-Gengma Counties, the principal stress axes of the whole seismic area is in the direction of NNE. Geological method can be adopted to clarify the distribution of surficial fracture caused by active faults, and high-precision seismic positioning and spatial distribution characteristics of seismic sequences can contribute to understand deep seismogenic faults and geometric features. Thus, we can better analyze the three-dimensional spatial distribution characteristics of seismotectonics and the deep and shallow tectonic relationship. The focal mechanism reveals the property and faulting process to a certain extent, which can help us understand not only the active property of faults, but also the important basis for deep tectonic stress and seismogenic mechanism. In order to study the fault characteristic of the Jinggu earthquake, the stress field characteristics of the source area and the geometric parameters of the fault plane, this paper firstly uses the 15 days aftershock data of the Jingsuo MS6.6 earthquake, to precisely locate the main shock and aftershock sequences using double-difference location method. The results show that the aftershock sequences have clustering characteristics along the NW direction, with a depth mainly of 5~15km. Based on the precise location, calculations are made to the focal mechanisms of a total of 46 earthquakes including the main shock and aftershocks with ML ≥ 3.0 of the Jinggu earthquake. The double-couple(DC)component of the focal mechanism of the main shock shows that nodal plane Ⅰ:The strike is 239°, the dip 81°, and the rake -22°; nodal plane Ⅱ, the strike is 333°, the dip 68°, and the rake -170.31°. According to focal mechanism solutions, there are 42 earthquakes with a focal mechanism of strike-slip type, accounting for 91.3%. According to the distribution of the aftershock sequence, it can be inferred that the nodal plane Ⅱ is the seismogenic fault. The obtained focal mechanism is used to invert the stress field in the source region. The distribution of horizontal maximum principal stress orienation is concentrated. The main features of the regional tectonic stress field are under the NNE-SSW compression(P axis)and the NW-SE extension(T axis)and are also affected by NNW direction stress fields in the central region of Yunnan, which indicates that Jinggu earthquake fault, like Gengma earthquake, is a new NW-trending fault which is under domination of large-scale tectonic stress and effected by local tectonic stress environment. In order to define more accurately the occurrence of the fault plane of the Jinggu earthquake, with the precise location results and the stress field in the source region, the global optimal solution of the fault plane parameters and its error are obtained by using both global searching simulated annealing algorithm and local searching Gauss-Newton method. Since the parameters of the fault plane fitting process use the stress parameters obtained by the focal mechanism inversion, the data obtained by the fault plane fitting is more representative of the rupture plane, that is, the strike 332.75°, the dip 89.53°, and the rake -167.12°. The buried depth of the rupture plane is 2.746km, indicating that the source fault has not cut through the surface. Based on the stress field characteristics and the inversion results of the fault plane, it is preliminarily believed that the seismogenic structure of the Jinggu earthquake is a newly generated nearly vertical right-lateral strike-slip fault with normal component. The rupture plane length is about 17.2km, which does not extend to the Puwen fault zone. Jinggu earthquake occurred in Simao-Puer seismic region in the south of Sichuan-Yunnan plate. Its focal mechanism solution is similar to that of the three sub-events of the Gengma earthquake in November 1988. The seismogenic structure of both of them is NW-trending and the principal stress is NE-SW. The rupture plane of the Jinggu main shock(NW direction)is significantly different from the known near NS direction Lancang Fault and the near NE direction Jinggu Fault in the study area. It is preliminarily inferred that the seismogenic structure of this earthquake has a neogenetic feature. 相似文献