共查询到20条相似文献，搜索用时 46 毫秒
1.
This paper presents a constitutive model for describing the stress-strain response of sands under cyclic loading. The model, formulated using the critical state theory within the bounding surface plasticity framework, is an upgraded version of an existing model developed for monotonic behaviour of cohesionless sands. With modification of the hardening law, plastic volumetric strain increment and unloading plastic modulus, the original model was modified to simulate cyclic loading. The proposed model was validated against triaxial cyclic loading tests for Fuji River sand, Toyoura sand and Nigata sand. Comparison between the measured and predicted results suggests that the proposed modified model can capture the main features of cohesionless sands under drained and undrained cyclic loading. 相似文献
2.
3.
The evaluation of the undrained cyclic resistance of sandy deposits is required to forecast the soil behaviour during an earthquake (liquefaction, cyclic mobility); due to the difficulties in obtaining undisturbed samples of most liquefiable soils, it is usually deduced from field test results such as cone penetration tests. This paper proposes a methodology to evaluate the undrained cyclic resistance from normalised cone resistance of two well-studied silica sands (Ticino and Toyoura), with different mineralogy, one mainly composed of feldspar, the other of quartz. The determination of the cyclic resistance of Ticino and Toyoura sands was achieved through undrained cyclic triaxial tests on reconstituted specimens. The tip resistance was deduced from CPTs performed in centrifuge with a miniaturised piezocone on homogeneous reconstituted models. Both the undrained cyclic and tip resistances were correlated with the state parameter ψ. Results of centrifuge and triaxial tests were combined through ψ to deduce the cyclic resistance ratio CRR directly from the normalised cone resistance. The shape of the curve relating CRR to the normalised cone resistance resulted unusual respect to all the recognised curves widespread in the geotechnical literature. The aim of the proposed correlations is to provide a useful instrument to improve the actual knowledge on liquefaction and to give a contribution based on the critical state soil mechanics framework to the development of refined correlations between the cyclic resistance of a sand and the results of cone penetration tests. 相似文献
4.
饱和土体静态液化失稳理论预测 总被引：1，自引：0，他引：1
通过在屈服准则和剪胀性方程中引入材料状态参数,建立了一个与材料状态相关的本构模型,用于模拟不同初始孔隙比和围压下土体的应力-应变关系。基于二阶功理论,建立了饱和土体静态液化失稳理论判别准则。通过预测一系列饱和松砂三轴不排水试验结果,验证了所建立的本构模型及判别预测准则的合理性。分析结果表明,静态液化发生于土体硬化阶段,静态液化触发伴随着剪应力达到峰值,其后剪应力降低且孔隙水压力持续增长。进一步地,模拟了充分降解的城市固体废弃物在不排水条件下的应力-应变特性,并预测到了潜在失稳线及静态液化触发点。 相似文献
5.
Predicting flow liquefaction,a constitutive model approach 总被引：1，自引：1，他引：0
In this paper, flow liquefaction criterion for contractive loose sands is analytically extracted based on the fundamental definition of flow liquefaction. In order to obtain the closed form of this criterion, Dafalias–Manzari constitutive model is employed; so the stress ratio at the onset of flow liquefaction is presented as a function of model parameters, state parameter and void ratio. Flow liquefaction line, as a graphical form of suggested criterion in stress space, shows that the peak points of undrained stress paths with same void ratios are not necessarily in a straight line. In order to validate the reliability of proposed flow liquefaction line to predict the onset of instability, it has been compared with the results of experimental tests performed on Toyoura, Ottawa and Leighton Buzzard sands. The verification results show that the present criterion can satisfactorily predict the onset of flow liquefaction in monotonic and cyclic undrained tests of saturated sands as well as the structural collapse in constant deviatoric stress tests of loose dry sands. 相似文献
6.
7.
Jean-Herv Prvost 《国际地质力学数值与分析法杂志》1977,1(2):195-216
The proposed general analytical model describes the anisotropic, elasto-plastic, path-dependent, stress-strain-strength properties of inviscid saturated clays under undrained loading conditions. The model combines properties of isotropic and kinematic plasticity by introducing the concept of a field of plastic moduli which is defined in stress space by the relative configuration of yield surfaces. For any loading (or unloading) history, the instantaneous configuration is determined by calculating the translation and contraction (or expansion) of each yield surface. The stress-strain behaviour of clays can thus be determined for complex loading paths and in particular for cyclic loadings. The stress-strain relationships are provided for use in finite element analyses. The model parameters required to characterize the behaviour of any given clay can be derived entirely from conventional triaxial or simple shear soil test results. The model's extreme versatility is demonstrated by using it to formulate the behaviour of the Drammen clay under both monotonic and cyclic loading conditions. The parameters are determined by using solely the results from monotonic and cyclic strain-controlled simple shear experimental tests, and the model's accuracy is evaluated by applying it to predict the results of other tests such as (1) cyclic stress-controlled simple shear tests, (2) monotonic triaxial loading compression and unloading extension tests, and (3) cyclic stress- and strain-controlled triaxial tests on, this same clay. The theoretical predictions are found to agree extremely well with the experimental test results. 相似文献
8.
This paper presents a two-surface plasticity model for describing some important features of saturated clay under cyclic loading conditions, such as closed hysteresis loops, cyclic shakedown and degradation, and different stress–strain relations for two-way loading. The model, namely ACC-2-C, is based on the elastoplastic model ACC-2 (an adapted Modified Cam Clay model with two yield surfaces) developed by Hong et al. (Acta Geotech 11(4):871–885, 2015). The small-strain nonlinearity concept is adopted to achieve the nonlinear characteristics of clay during unloading–loading stage. The new hardening law related to accumulated deviatoric plastic strain is proposed for the inner surface to describe the cyclic shakedown and degradation. Following the advantages of the ACC-2 model, the constitutive equations are simply formulated based on the consistency condition for the inner yield surface. The model is conveniently implemented in a finite element code using a stress integration scheme similar to the Modified Cam Clay model. The simulation results are highly consistent with experimental data from drained and undrained isotropic cyclic triaxial tests in normally consolidated saturated clay under both one-way and two-way loadings.
相似文献9.
Experimental evidence has indicated that the critical state line determined from undrained compression tests is not identical to that determined from undrained extension tests. The purpose of this paper is to investigate a modelling method that accounts for the non‐uniqueness of critical state lines in the compression and the extension testing conditions. Conventional elastic–plastic cap models can predict only a unique critical state line for the compression and the extension tests. A new micromechanical stress–strain model is developed considering explicitly the location of critical state line. The model is then used to simulate undrained triaxial compression and extension tests performed on isotropically consolidated samples with different over‐consolidated ratios. The predictions are compared with experimental results as well as that predicted by models with kinematic hardening of yield surface. All simulations demonstrate that the proposed micromechanical approach is capable of modelling the undrained compression and the undrained extension tests. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
10.
Liquefaction is associated with the loss of mean effective stress and increase of the pore water pressure in saturated granular materials due to their contractive tendency under cyclic shear loading. The loss of mean effective stress is linked to loss of grain contacts, bringing the granular material to a “semifluidized state” and leading to development and accumulation of large cyclic shear strains. Constitutive modeling of the cyclic stress-strain response in earthquake-induced liquefaction and post-liquefaction is complex and yet very important for stress-deformation and performance-based analysis of sand deposits. A new state internal variable named strain liquefaction factor is introduced that evolves at low mean effective stresses, and its constitutive role is to reduce the plastic shear stiffness and dilatancy while maintaining the same plastic volumetric strain rate in the semifluidized state. This new constitutive ingredient is added to an existing critical state compatible, bounding surface plasticity reference model, that is well established for constitutive modeling of cyclic response of sands in the pre-liquefaction state. The roles of the key components of the proposed formulation are examined in a series of sensitivity analyses. Their combined effects in improving the performance of the reference model are examined by simulating undrained cyclic simple shear tests on Ottawa sand, with focus on reproducing the increasing shear strain amplitude as well as its saturation in the post-liquefaction response. 相似文献
11.
A modification to the nonlinear Pastor–Zienkiewicz–Chan (PZC) constitutive model without any change in the number of model parameters is introduced in order to simulate stiffness degradation of dense sands at dynamic loading. The PZC model is based on generalized plasticity and was verified by good prediction of liquefaction and undrained behavior of saturated sand. The PZC is a robust model that can predict drained dynamic behavior of sands, especially stiffness increase in loose sand at reloading of dynamic loading. Yet, this model does not show stiffness degradation of dense sand at reloading. The modification is made through modifying the stress memory factor, H DM, which is multiplied by the plastic modulus, H L. This modification does not influence reloading behavior of loose sand. The modified PZC model is verified via results of drained cyclic tests. Two cyclic triaxial tests on loose and dense specimens, along with two cyclic plane strain tests on dense sand are utilized for validation. The model simulation shows that the modified PZC model is able to predict the stiffness degradation of dense sand at reloading well. 相似文献
12.
In this paper, there is presented an elastoplastic constitutive model to predict sandy soils behavior under monotonic and cyclic loadings. This model is based on an existing model (Cambou‐Jafari‐Sidoroff) that takes into account deviatoric and isotropic mechanisms of plasticity. The flow rule used in the deviatoric mechanism is non‐associated and a mixed hardening law controls the evolution of the yield surface. In this research the critical state surface and history surface, which separates the virgin and cyclic states in stress space, are defined. Kinematic hardening modulus and stress–dilatancy law for monotonic and cyclic loadings are effectively modified. With taking hardening modulus as a function of deviatoric and volumetric plastic strain and with defining the history surface and stress reversal, the model has the ability to predict the sandy soils' behavior. All of the model parameters have clear physical meanings and can be determined from usual laboratory tests. In order to validate the model, the results of homogeneous tests on Hostun and Toyoura sands are used. The results of validation show a good capability of the proposed model. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
13.
为了获得广东珠江口海洋软土的不排水抗剪强度,分别开展了不固结不排水剪切和固结不排水剪切三轴试验、无侧限抗压试验、现场取土离心机正常固结模型地基的T-bar静力贯入试验以及现场十字板剪切试验和静力触探试验（CPT）,并采用土力学经验公式进行计算,确定了珠江口海洋软土不排水抗剪强度沿深度的分布规律,并综合评价了各种方法的有效性。为了获得该区域软土的循环弱化规律,分别开展了循环动三轴试验、现场取土离心机正常固结模型地基的T-bar循环贯入试验和现场单桩水平循环加载试验,揭示了软土循环动模量比与循环次数之间的双对数线性关系,获得了3种试验条件下珠江口海洋软土的循环弱化因子。其研究结果可为该区域海洋建筑物设计提供直接依据,也可为其他类型工程提供借鉴。 相似文献
14.
A new elastoplastic model called loading memory surface based on the critical state concept and the multi‐surface framework is proposed for geomaterials. The model uses a hypoelastic formulation and two plastic mechanisms. The formulations of the model are made in three‐dimensional stress–strain space and work under both monotonic and cyclic loadings. A newly introduced formalism makes it possible to obtain the cyclic response directly from the monotonic loading one. This formalism gives a three‐dimensional generalization of the well‐known Masing rule. The model has been validated against test results of Hostun sand under several conditions: monotonic and cyclic, drained and undrained, tests in compression and in extension, and at different confining pressures and different densities. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
15.
Modelling cyclic behaviour of granular soils under both drained and undrained conditions with a good performance is still a challenge. This study presents a new way of modelling the cyclic behaviour of granular materials using deep learning. To capture the continuous cyclic behaviour in time dimension, the long short-term memory (LSTM) neural network is adopted, which is characterised by the prediction of sequential data, meaning that it provides a novel means of predicting the continuous behaviour of soils under various loading paths. Synthetic datasets of cyclic loading under drained and undrained conditions generated by an advanced soil constitutive model are first employed to explore an appropriate framework for the LSTM-based model. Then the LSTM-based model is used to estimate the cyclic behaviour of real sands, ie, the Toyoura sand under the undrained condition and the Fontainebleau sand under both undrained and drained conditions. The estimates are compared with actual experimental results, which indicates that the LSTM-based model can simultaneously simulate the cyclic behaviour of sand under both drained and undrained conditions, ie, (a) the cyclic mobility mechanism, the degradation of effective stress and large deformation under the undrained condition, and (b) shear strain accumulation and densification under the drained condition. 相似文献
16.
通过FLAC3D二次开发平台,在VC++环境下实现了基于砂土液化大变形机制的变动映射中心边界面弹塑性模型的二次开发。基于饱和砂土液化大变形本构理论,该模型符合三维应力空间边界面映射规则,并引入临界状态变量,可实现对不同密度和围压状态下砂土液化大变形分析。针对FLAC3D程序混合离散技术与数据调用模式和模型的体积相容性条件,测试分析了将模型采用不同植入方案的计算稳定性,开发了在FLAC3D混合离散技术下不同子区共享映射中心,进入与离开液化状态保持同步的开发方案,并给出模型开发的关键技术与实施方法。利用开发的模型,对饱和砂土开展了不排水/排水/循环三轴试验与不排水循环扭剪试验模拟,及三维地基的动力反应分析。计算结果表明,模型及所开发程序具有很好的模拟与分析砂土液化后大变形的能力。 相似文献
17.
适用于砂土循环加载分析的边界面塑性模型 总被引：1，自引：0，他引：1
基于临界状态土力学框架,建立了一个适用于砂土排水循环加载的边界面塑性模型。采用了考虑虚拟峰值应力比的偏应变硬化准则,初始加载阶段应力点位于边界面上,反向加载阶段以历史最大屈服面作为边界面,同时实现了对密砂软化现象的模拟和对历史所受最大应力的记忆。边界面采用修正的椭圆形,引入考虑密度与应力水平的状态相关剪胀函数,采用非相关联流动法则和以应力反向点作为映射中心的径向映射准则。模型仅有10个参数,通过常规三轴试验即可确定,并且使用一套参数可以模拟不同围压、密度的单调和循环加载情况。分别对饱和砂土的单调、循环排水三轴试验进行模拟,结果表明,该模型能够合理地反映饱和砂土排水条件下的应力-应变特性。 相似文献
18.
A new constitutive formulation for simulating the behaviour of nearly saturated sands under seismic loads is presented. The formulation is based on combining the Henry's law for dissolution of gas in water, the ideal or perfect gas law and the law of conservation of mass. The effects of transient air dissolution in water on the compressibility of partially saturated soils are also taken into account. The model was calibrated based on numerical simulations of isotropically consolidated cyclic triaxial tests conducted on partially saturated samples of Toyoura sand. A multi‐yield plasticity soil constitutive model implemented in the finite element code DYNAFLOW was used for these numerical simulations. It is shown that the formulation proposed here is able to reasonably predict the soil cyclic undrained behaviour at various degrees of saturation (95% and higher). Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
19.
Tsutomu Namikawa 《国际地质力学数值与分析法杂志》2001,25(6):605-627
A delayed plastic model, based on the theory of plasticity, is proposed to represent the time‐dependent behaviour of materials. It is assumed in this model that the stress can lie outside the yield surface and the conjugate stress called static stress is defined on the yield surface. The stress–strain relation is calculated based on the plastic theory embedding the static stress. Thus, the stress–strain relation of the model practically corresponds to that of the inviscid elastoplastic model under fairly low rate deformation. The delayed plastic model is coupled with the Cam‐clay model for normally consolidated clays. The performance of the model is then examined by comparing the model predictions with reported time‐dependent behaviour of clays under undrained triaxial conditions. It is shown that the model is capable of predicting the effect of strain rate during undrained shear and the undrained creep behaviour including creep rupture. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
20.