首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到18条相似文献,搜索用时 157 毫秒
1.
上海城区雾的形成和特征   总被引:4,自引:1,他引:4       下载免费PDF全文
本文对上海市区1984年全年27个雾日的天气形势和有关气象要素的变化作了比较深入的分析。发现上海该年出现4种雾类即:锋面雾(占40.7%)、辐射雾(占29.7%)、平流辐射雾(占18.5%)和平流雾(占11.1%)。并指出上海城市雾具有下述三个主要特征:(1)近数十年来年平均雾日数有递减趋势,近8年年平均雾日比前20年减少14.4天;(2)在城市辐射雾和平流辐射雾出现前,出现城市湿岛的机率高达92.3%,可作为这两种雾的先兆。在秋冬季节,在这两种雾中,还出现雾天城市湿岛效应;(3)有相当多的低相对湿度城市“浊雾”。  相似文献   

2.
上海城市对雾的影响   总被引:3,自引:0,他引:3  
周淑贞  郑景春 《气象学报》1987,45(3):366-369
上海是我国最大的工商业城市,城市气候效应十分显著。本文应用上海气象台(位于市区龙华)气象资料和上海十个郊县气象资料,来分析上海城市对雾的影响。 1.上海城市对雾的生消影响 上海是我国沿海多雾城市之一。我们曾根据上海近24a(1956—1979)中出现的990次雾作了普查,按照成雾的物理机制不同,可以把上海的雾分成:辐射雾、锋面雾、平流雾和平流辐射雾四类。其中以辐射雾为最多,约占总雾日数的44.8%。形成各类雾的天气形势和有关气象要素的变化虽各不相同,  相似文献   

3.
建立了一个二维时变数值模式,模拟了浅水湖沼—陆面地区平流辐射雾形成、演变和消散的基本过程。结果表明,地面温度迅速下降是成雾前的一个重要特征;浅水湖沼地区充沛的水汽对平流辐射雾的形成极为有利;平流作用可使辐射雾呈爆发性发展;长短波辐射与湍流混合的共同作用是辐射雾生消的主要物理机制;成雾后在雾顶的稍下方有长波辐射冷却率的极大区,最大值为21×10-3oC/s(76oC/h)。模拟结果与观测事实基本一致。  相似文献   

4.
大连地区辐射雾与平流雾边界层温度场及风场对比   总被引:3,自引:1,他引:2  
程相坤  蔡冬梅 《气象科技》2010,38(4):427-431
选取2008年3月和6月出现在大连及其沿海地区的辐射雾和平流雾过程,采用GTS1型数字式探空仪探测资料、能见度仪自动观测资料和常规观测资料,对其边界层温度场及风场结构特征进行了对比分析。结果表明,两种性质不同的大雾(辐射雾和平流雾)具有共同特征:都产生于纬向环流背景,中层东南暖湿气流为大雾的形成提供了充沛的水汽和热力条件。但两者存在明显的差异:底层东北风平流降温是辐射雾生成的重要条件,却造成了平流雾的消亡,底层东南风是平流雾生成的条件,却对应于辐射雾的消亡;辐射雾逆温厚而强,平流雾则为弱的逆温或无逆温;辐射雾生消演变对应于大气层结由稳定发展为不稳定,平流雾则对应于由不稳定趋于稳定。  相似文献   

5.
南京市冬季雾的物理化学特征   总被引:3,自引:1,他引:2  
为研究南京冬季浓雾的宏微观物理结构和物理化学过程,揭示空气污染物与雾水化学结构的关系,2006—2007年冬季,在南京信息工程大学院内进行了雾的综合观测试验。观测项目包括雾的宏微观结构、雾水化学、大气气溶胶粒子谱及化学成分、辐射和热量平衡各分量、湍流以及常规气象和环境监测。在雾的生消过程中,各项目的观测是连续进行的。两年共观测到27次雾过程,并采集到37个雾水样本。按其形成,将南京冬季雾分为辐射雾、平流辐射雾和蒸发雾三类。该文详细分析了各类雾的宏微观结构,研究了强浓雾(能见度小于50m)发展的物理过程。结果指出,南京冬季雾多属暖雾,雾顶高度以平流辐射雾最高,平均顶高851m,辐射雾次之,平均顶高486m,蒸发雾偏低,平均顶高428m;各微物理参数均以平流辐射雾最大,辐射雾次之,蒸发雾最小,平流辐射雾含水量最大时可达1g/m3。通过对微物理参量连续变化分析发现,平流辐射雾和辐射雾进入强盛阶段时,都具有明显的爆发性增强特征。雾水化学分析结果表明,南京雾水离子浓度比较高,酸雾约占43%,属于硫酸型,均与空气污染物SO2、NO2和颗粒物有关。  相似文献   

6.
张礼春  朱彬  耿慧  马国忠 《气象》2013,39(10):1284-1292
本文选取2006年12月24—27日(平流辐射雾)南京大雾的外场观测资料及NCEP的2.5°×2.5° NC再分析资料和GDAS全球1°×1°气象资料,结合天气形势、气象要素、物理量场,并利用轨迹分析方法,对这次浓雾的边界层特征及水汽输送进行分析,探讨这次浓雾形成和持续的主要边界层物理和天气学成因。分析表明:(1)这次浓雾过程期间始终存在深厚的逆温层结,甚至出现多层逆温。浓雾过程中,在中上空不同逆温层顶温度比地面温度高出2~5℃。逆温层厚多在200 m以上,26日08时逆温层厚达500 m。逆温层的存在,使大气层结更加稳定,在雾形成前期利于低层水汽聚集,雾形成后又抑制水汽的扩散,利于雾体的发展和维持,是这次浓雾能持续约64 h,强浓雾时段(能见度<50 m)持续约37 h的重要因素。(2)这次平流雾过程低层水汽通量散度呈负值,上空持续出现水汽辐合,最强水汽辐合出现在25日02时左右,为-30×10-7 g·s-1·cm-2·hPa-1。低层辐合利于水汽的聚集,雾得以形成和发展,而雾过程后期水汽辐散则加快雾的消亡。贯穿整个雾过程的水汽辐合是这次平流辐射雾长时间维持的重要条件。(3)这次平流辐射雾过程中水汽输送路径是自中国东部沿海抵达南京;雾期间,水汽又来自海上源源不断的输送,最大时南京上空水汽通量达到2 g·s-1·hPa-1·cm-1。水汽的供应和后期补充量,决定了浓雾的持续时间。  相似文献   

7.
二维平流辐射雾的数值模拟   总被引:15,自引:5,他引:15  
本文采用二维非定常数值模式,模拟了大气边界层内辐射雾、平流辐射雾和在海陆交界处的平流辐射雾的形成、演变规律。研究了雾发展过程中湍流-辐射作用及风场、水汽平流和海陆风环流对雾发展影响的特点。模拟计算结果得出湍流-辐射作用是雾发展变化的主要物理因子。大气边界层风场及风场环流和水汽的平流输送对在不同地点,时刻雾的发展和强度变化也有重要的影响。  相似文献   

8.
利用1980-2011年的重庆全市36个区县气象站的能见度及相对湿度资料,分析了重庆全区域雾的气候特征。选取全市的典型浓雾个例,利用NCEP 1°×1°的再分析资料和L波段雷达资料,合成分析了辐射雾和雨雾的环流形势、温、湿、风的垂直结构。结果表明:重庆全区域雾呈现西多东少的分布形势,出现的时间主要集中在10月至次年2月,年平均雾日数在21世纪初呈现显著下降趋势,雾日减少的突变发生在2002年。辐射雾发生时500 hPa中亚及青藏高原地区为高压脊,地面上重庆位于高气压内部的均压场中,冷锋已到达华南地区;而雨雾发生时500 hPa青藏高原地区为低压槽区,地面冷高压中心位于我国北方地区,有弱冷空气经大巴山从东北向渗入重庆。两种雾的温、湿、风垂直结构特征表现为辐射雾近地层逆温明显强于雨雾;上干下湿和湿层深厚分别是辐射雾和雨雾形成时,湿度垂直结构的主要特征;两种雾形成时近地层风速都很小,总体来看雨雾发生时各层的风速都大于辐射雾。  相似文献   

9.
一次平流辐射雾的边界层特征及雾水离子组分研究   总被引:6,自引:1,他引:5  
江玉华  王强  王正兴  徐晓斌 《气象》2009,35(2):19-28
为了研究北京城市浓雾生成机理以及雾水的污染情况,2006年12月11-12日,在北京南郊北京市观象台(39°56'N、116°17'E)对水平能见度在100m以内的浓雾进行了观测,并分析了这次浓雾形成的天气条件,对所采集的雾水进行了离子组分分析.结果显示:这是一次平流辐射雾,雾层厚约150m,能见度小于100m;在高空槽前、稳定边界层中,近地面正相对涡度区内有气流辐合和暖湿平流,日落之后地面降温迅速,有利于雾的生成;地面偏南风配合近地层暖平流,有利于增加雾的浓度;浓雾的形成发展时段内伴随着大气五级重污染事件.与1999年北京的雾水采样比较:pH值上升,电导率下降,阴离子浓度普遍下降,阳离子浓度有所上升.研究表明,近年来北京城市所采取的治理措施,减轻了浓雾及其雾水中的污染.  相似文献   

10.
本文应用MICAPS探空资料(第五类站点数据)及地面观测资料(第一类格点数据、第四类站点数据)和NCEP再分析资料,对2009年11月13~14日发生在豫北地区的一次大雾天气过程的形成、持续及其性质转变的原因进行分析,发现地面中尺度辐合线(区)的时空分布与大雾过程有时间上的伴随关系。水汽通量输送和温度平流的变化以及地面辐射降温的共同作用导致了这次大雾的性质在持续过程中发生了转变,即由辐射雾变成平流雾。分析表明:13日08时之前豫北的降雪带来的充足水汽和夜间晴朗少云微风造成的辐射降温是形成辐射雾的主要原因;13日14时开始在豫北水汽通量输送加大和暖平流不断加强的同时地面持续降温,使得暖湿空气在较冷的下垫面冷却导致辐射雾转变为平流雾。  相似文献   

11.
The influence of urban intensity on fog evolution in the Beijing-Tianjin-Hebei (BTH) region (China) is investigated numerically with the the Weather Research and Forecasting (WRF) model coupled with the urban canopy parameterization-building energy model (UCP- BEM) urban physics scheme. The experiments were designed with a focus on the influence of different urban intensities, which are represented by a different fractional coverage of natural land, buildings, and energy consumption inside buildings in an urban environment. The results of this study indicate that urban areas notably influence fog evolution when natural land is reduced to a small fraction (e.g., less than 10%). Developed land changes fog evolution through urban effects. Higher urban intensity (HUI) generally results in warmer temperatures and lower wind speeds throughout the day, while inhibiting morning specific humidity loss and afternoon specific humidity gain because of the HUI effect on surface heat flux, surface roughness, and surface moisture flux. HUI leads to later and weaker liquid water content formation, with a higher liquid water content base, primarily due to its effect on near surface temperatures. This finding implies that HUI may inhibit the conditions for fog formation. In addition, urban areas with equal natural and developed land coverage seem to greatly enhance the upward surface moisture flux, which is attributed to the combination of a relatively large potential evaporation on developed land and an ample moisture supply from natural land. As a result, the specific humidity increases in the afternoon.  相似文献   

12.
A new Canadian numerical urban modelling system has been developed at the Meteorological Service of Canada to represent surface and boundary-layer processes in the urban environment. In this system, urban covers are taken into account by including the Town Energy Balance urban-canopy parameterization scheme in the Global Environmental Multiscale meteorological model. The new modelling system is run at 250-m grid size for two intensive observational periods of the Joint Urban 2003 experiment that was held in Oklahoma City, U.S.A. An extensive evaluation against near-surface and upper-air observations has been performed. The Town Energy Balance scheme correctly simulates the urban micro-climate, more particularly the positive nighttime urban heat island, and also reproduces the “cool” island during the morning but does not succeed in maintaining it during all of the daytime period. The vertical structure of the boundary layer above the city is reasonably well simulated, but the simulation of the nocturnal boundary layer is difficult, due to the complex interaction with the nighttime southerly low-level jet that crosses the domain. Sensitivity tests reveal that the daytime convective boundary layer is mainly driven by dry soil conditions in and around Oklahoma City and that the nighttime low-level jet reinforces the urban heat island in the first 300m through large-scale advection, leading to the development of a less stable layer above the city.  相似文献   

13.
郭丽君  郭学良 《大气科学》2016,40(2):296-310
北京地区持续性大雾天气近几年呈显著增加趋势,但由于缺乏高时间分辨率的雾微物理和大气廓线数据,限制了对大雾垂直结构和物理成因的深入了解。本文基于美国Radiometrics公司生产的35通道MP-3000A型微波辐射计廓线仪(Microwave Radiometer Profiler,简称MWRP)及常规气象和卫星观测资料分析研究了2009~2013年期间北京地区13次大雾天气过程的类型、垂直结构特征及其产生的物理成因。按照雾产生的基本条件,将13次大雾天气主要划为平流雾和蒸发雾两类,辐射雾存在于持续性大雾过程中,不做单独划分。平流雾的平均雾顶高度不超过1.0 km,而蒸发雾的平均雾顶高度在0.5~1.5 km之间。平流雾主要是由来自西南和东南的暖湿平流移经北京地区冷下垫面后冷却降温过程产生,强逆温的形成有利于雾的持续发展。而蒸发雾是由本地区降水蒸发冷却形成,或是冷平流移经暖湿下垫面形成。按照微波辐射计连续观测的雾宏微观垂直结构特征,将13次大雾天气过程又划分为单一雾结构和云雾共存结构,并采用卫星和地面气象观测数据对部分典型雾个例进行了比较验证研究。结果表明,在13次大雾天气中,平流雾和蒸发雾各占69%和31%。由此说明北京地区持续性大雾天气主要是由暖湿平流过程和降水蒸发冷却过程造成,与天气过程的异常密切相关。单一雾结构仅占15%,而云雾共存结构占近85%,且持续三天以上的大雾天气基本具有云雾共存结构。  相似文献   

14.
南京冬季浓雾的演变特征及爆发性增强研究   总被引:5,自引:2,他引:3  
2007年12月18—19日,南京地区出现了一次持续20h的浓雾过程,其中能见度低于50m的强浓雾几乎占到整个雾过程的1/3。利用同期在南京市北郊的外场观测数据,结合NCEP再分析资料,分析了该次雾的演变过程、微物理结构及边界层特征,探讨了地面雾爆发性增强的成因。结果表明:本次雾在西南平流的增湿作用下触发生成;日出后,平流输送和地表蒸发提供了充足水汽来源,贴地层逆温因高空下沉增温而向上抬升且稳定存在,因此大雾得以维持;整个雾过程中雾滴数浓度、平均直径、含水量随时间的变化趋势基本一致,平均谱曲线均呈指数下降分布,雾滴集中在小滴端;两次地面雾爆发性增强均发生在夜间,其特征为各微物理参量明显增大,滴谱上抬拓宽;爆发性增强的原因是地表气温陡降、贴地层逆温增强及可充当雾滴凝结核的气溶胶大粒子数增多。  相似文献   

15.
利用那曲市色尼区常规气象观测资料,结合NCEP(1°×1°)、Era5(0.25°×0.25°)再分析资料,从天气学角度对2019年4月10日藏北一次浓雾天气的形成机制、物理结构特征以及局地性爆发的成因进行诊断分析。结果表明:此次浓雾具有局地爆发性特征;前期积雪融化的水汽蒸发配合风场辐合作用,为此次大雾的形成提供了水汽条件;500 hPa环流背景及边界层内上层暖平流与下层冷平流配置,为大雾的形成提供了弱风与稳定层结条件,从而雾得以发展且维持;夜间少云,地表净辐射加强,降温冷却作用导致水汽达到饱和状态,利于水汽凝结形成无数悬浮于空气里的小雾滴;近地层风速小、逆温及下沉运动使水汽不易向高空扩散,在相对有限的空间内水汽大量汇聚,导致大雾爆发性发展;大雾的局地性与特殊地形关系密切。  相似文献   

16.
Now more comprehensive cloud microphysical processes have been included in advanced three-dimensional mesoscale meteorological model such as PSU/NCAR MM5 model,so the model can be used in the prediction of fog.In this paper,MM5 was utilized to simulate an advection fog occurring in Nanling Mountain area.The simulated results were compared with the facts obtained by detailed observation experiment.The results showed that the simulation was successful in the following aspects:(1)the formation and development of the fog;(2)the temporal variation of the maximum liquid water content;(3)the diffusion of the cold air,especially the temporal variation of the ground temperature;and (4)the uplift of the air and the formation and development of the low-lever inversion.Besides,we did some sensitivity numerical experiments and discussed the effects of the radiation,the release of condensation latent heat and the change of soil moisture and temperature on the formation and development of fog.The success of numerical simulation experiment of fog has proved that the numerical forecasting of fog is promising.  相似文献   

17.
Using the composite field observational data collected in the area south of the Nanling Mts. and numerical modeling, the seasonal features of dense fog and visibility, fog drop spectrum and physical concept of fog forming have been analyzed. The occurring frequency of low visibility(≤200 m) is very high with a mean of 24.7%, a maximum of 41.8% from the end of autumn to winter and next spring. The fog processes that occur in the area south of the Nanling Mts. in spring and winter result from the interactions of complicated micro-physical processes, the local terrain, water vapor transportation and the influencing weather system. The fog processes are arisen from advection or windward slope, which is much different from the radiation fog. Cooling condensation due to the air lifted by the local mountain plays an important role in fog formation. Windward slope of the mountain is favorable to the fog formation. Dense fog can occur at lower altitudes in the windward slope of mountain, resulting in the lower visibility. The fog is mainly of small-drop spectrum with smaller number-density than that of urban fog, and its drop spectrum has descending trend in the section of smaller diameter. The inverse relationship between fog water content and visibility is the best among several relationships of micro-variables. In addition to micro-physical processes of fog body itself, the motion of irregular climbing and crossing over hillside while the fog body is being transported by the wind are also important reasons for the fluctuation of micro-physical parameters such as fog water content.  相似文献   

18.
华南沿海暖海雾过程中的湍流热量交换特征   总被引:14,自引:3,他引:11  
黄健  王斌  周发琇 《大气科学》2010,34(4):715-725
湍流交换是海雾中的关键物理过程, 在海雾的热量和水汽平衡过程中起重要作用。本文根据2007年3月24~25日一次海雾的外场观测数据, 分析了海雾过程中近海面湍流热量交换特征; 并在区分风切变机械湍流与雾顶长波辐射冷却热力湍流的基础上, 着重分析了两种不同性质的湍流对海雾发展和维持的作用。结果表明: (1) 本次海雾是在西南低压和变性冷高压的控制下, 来自南海东部暖水区的空气平流在近岸冷海面上形成的暖海雾; 暖海雾中的湍流热量交换过程比冷海雾更为复杂; (2) 在暖海雾的形成和消散阶段, 风切变机械湍流的热量输送起主要作用; 而在发展和维持阶段, 既有风切变机械湍流的热量输送作用, 也有雾顶长波辐射冷却热力湍流的热量输送作用; (3) 风切变机械湍流向冷海面输送热量, 对近海面空气起到降温和增湿作用; 热力湍流同样向冷海面输送热量, 但对雾层起到增温和降湿作用; (4) 暖海雾中的湍流热量交换机制与雾层的非充分混合结构有密切关系。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号