首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 52 毫秒
1.
全站仪自由设站方法是高速铁路工程测量中的常用方法,通常采用仪器自带的程序进行设站。但是全站仪自带程序是基于半盘位进行自由设站,当仪器含有竖盘指标差时,设站的计算高程与实际高程就会存在较大差异。因此,为了解决现有技术中设站精度不高,以及自由设站对全站仪要求过高等问题,提出了一种基于全盘位测量的自由设站方法。  相似文献   

2.
介绍了全站仪坐标测量及放样功能,并提出在路线测量中,当中线方向受障碍时确定方向转点的一种简便方法。将全站仪自由设站,利用全站仪的坐标测量及放样功能确定路线测量中的方向转点,并结合了计算机辅助设计软件的绘图功能,快速获得方向转点坐标;利用全站仪自由设站法在线路施工测量中确定方向转点,操作方法简单、方便、灵活。而且受地形起伏条件限制少,精度高。对其原理、操作方法进行了分析及算例计算。  相似文献   

3.
叶锦强 《北京测绘》2014,(5):127-129
露天矿采场开采随着采掘工作的进展,露天矿中大部分的地形、地貌经常性地变化;而设在露天矿采场上的测量工作控制点经常被破坏。为了满足露天矿采场开采过程中对测量工作的要求;采用全站仪自由设站法,完善了露天矿采场掘进、施工放样,需要不断的补设测量工作控制点的应用;摸索出一种全站仪自由设站法应用于露天矿采场开采过程中建立工作控制点的方法;进行了理论上和实践上的试验,达到了预期精度效果,解决了全站仪自由设站法在露天矿采场进行测量工作控制点补充的测量方法问题。  相似文献   

4.
智能型全站仪结合边角后方交会原理在高速铁路测量工作中得到广泛应用,其在CPⅢ高精度铺轨控制网的基础上进行自由重叠设站的精度能满足高铁测量的精度要求。在板式无碴轨道底板放样和轨道板安装时,可以根据仪器误差参数计算得出每个测站进行放样时误差不超限的最远放样距离,供测量人员参考。  相似文献   

5.
介绍了极坐标放样法在任意点设站测设曲线中线桩的原理和方法,充分利用全站仪和可编程计算器的优点,可一次设站多次放样,该法具有测站选择灵活,测设速度快,放样点位精度高等优点,是一种很好的放样方法。  相似文献   

6.
在对自动全站仪自由设站观测原理进行认真分析研究后,利用TC 2003高精度自动全站仪的自由设站加极坐标法对某高层建筑的一级基坑进行变形监测,通过监测结果精度分析,验证了自动全站仪在建筑物变形监测中的快速、准确性.  相似文献   

7.
常用全站仪放样方法及精度分析   总被引:2,自引:0,他引:2  
李巍  赵亮  张占伟  王昶 《测绘通报》2012,(5):29-32,40
根据全站仪设站方式分类,总结4种全站仪常用放样方法,并对每种放样方法作理论精度分析。针对每种方法采集数据,通过数据比较验证,分析全站仪进行坐标放样的实际精度。实例验证表明,全站仪坐标放样能为工程施工提供精度可靠的点位,对工程施工具有重要意义。  相似文献   

8.
用全站仪自由设站测设线路横断面   总被引:1,自引:0,他引:1  
在高速公路、铁路等线路工程测量中必须进行横断面测量。测量横断面是施工过程中一项非常麻烦的测量工作。传统方法测量横断面时,一般是把测量仪器安置在线路中线点上,而且测量一个断面必须安置至少一次仪器,地形变化大时测量一个断面需要安置几次仪器。当线路穿越通视条件差或难以架设仪器或高差较大的地区,常规的方法就会受到一定的限制甚至无法测量。使用全站仪采用自由设站法测量横断面,能克服上述不利条件,使烦琐的测量工作变得轻松方便。  相似文献   

9.
针对直线度测量时现场环境复杂、遮挡比较严重而无法布设高精度直线基准的情况,利用全站仪自由设站灵活、精度高的特点,提出了一种基于全站仪自由设站法的旋转轴直线度测量方法,推导了该方法自由设站和极坐标法测量的精度,通过具体案例验证了该方法的实用性和可靠性。  相似文献   

10.
智能型全站仪结合边角后方交会的原理在核电厂变形监测中得到广泛应用,其在主厂区首级控制网的基础上进行自由设站的精度能满足核电厂变形测量精度。采用以极坐标法为基础用自由设站法对构筑物水平位移监测时,可以根据仪器误差参数、核岛构筑物、常规岛及其他构筑物监测点的点位精度计算得出每个测站进行监测时误差不超限的最远观测距离。  相似文献   

11.
 采用Landsat TM数据分析了阿克苏河—塔里木河断面水质污染状况,通过波段的DN值和常规监测数据建立能反映水质状况的 污染物监测模型。结果发现,将2000年常规监测数据代入模型后,与遥感数据的结果基本吻合| 重建阿克苏河—塔里木河的连续水体 污染变化曲线,得出污染物浓度随着远离上游而增加。  相似文献   

12.
13.
The hard-rock hilly Aravalli terrain of Rajasthan province of India suffers with frequent drought due to poor and delayed monsoon, abnormally high summer-temperature and insufficient water resources. In the present study, detailed analysis of meteorological and hydrological data of the Aravalli region has been carried out for the years 1984–2003. Standardised Precipitation Index (SPI) has been used to quantify the precipitation deficit. Standardised Water-Level Index (SWI) has been developed to assess ground-water recharge-deficit. Vegetative drought indices like Vegetation Condition Index (VCI) and Temperature Condition Index (TCI) and Vegetation Health Index (VHI) have been computed using NDVI values obtained from Global Vegetation Index (GVI) and thermal channel data of NOAA AVHRR satellite. Detailed analyses of spatial and temporal drought dynamics during monsoon and non-monsoon seasons have been carried out through drought index maps generated in Geographic Information Systems (GIS) environment. Analysis and interpretation of these maps reveal that negative SPI anomalies not always correspond to drought. In the Aravalli region, aquifer-stress shifts its position time to time, and in certain pockets it is more frequent. In comparison to hydrological stress, vegetative stress in the Aravalli region is found to be slower to begin but quicker to withdraw.  相似文献   

14.
因受机场工程设计软件的测量数据容量限制,基于LiDAR采集、点云分类后得到的地面点云数据LAS不能完整应用于目前设计软件进行设计计算。本文通过对拟选技术方案的筛选,提出了利用FME Workbench数据处理功能,结合VBA编程获取外部方格网平面数据的方法。该方法在FME Workbench中实现了地面点云数据构建TIN、采用逐点内插方法从TIN中提取方格网高程数据、等高线生成及相应图形处理与成果输出。最终通过实际算例证明了该方法的有效性。  相似文献   

15.
The area around Sataun in the Sirmur district of Himachal Pradesh, India (falling between the rivers Giri and Tons; both tributaries of the Yamuna River) was studied for landslide vulnerability on behalf of the inhabitants. The study was made using extensive remote sensing data (satellite and airborne). It is well supported by field evidence, demographic and infrastructural details and aided by Geographic Information System (GIS) based techniques. Field observations testify that slope, aspect, geology, tectonic planes, drainage, and land use all influence landslides in the region. These parameters were taken into consideration using the statistical approach of landslide hazard zonation. Using the census data of 1991, vulnerability of the populace to the landslide hazard was accessed. As most of the infrastructure in the region is concentrated around population centres, population data alone was used for vulnerability studies.  相似文献   

16.
Although it is well known that coseismic gravity changes take place during an earthquake, previous research has not yielded convincing evidence demonstrating that significant gravity changes occur before large earthquakes. Furthermore, even if we suspect that gravity changes occur before large earthquakes, we have yet to demonstrate how to consistently observe these changes for useful earthquake forecast that would bring benefits to society. We analyzed ground gravity survey data obtained in 1998, 2000, 200...  相似文献   

17.
GNSS系统及其技术的发展研究   总被引:3,自引:1,他引:2  
阐述了国际上卫星导航系统的总体发展,对美、俄、欧、中的四大全球系统,以及相关的区域系统和增强系统进行了简单的介绍,研究分析了GNSS系统及其技术的发展趋势,同时分析了我国Compass全球系统面临的机遇和挑战,并提出了我国未来工作的建议.  相似文献   

18.
自动车辆定位导航系统中传感器的误差分析   总被引:1,自引:0,他引:1  
徐爱功 《测绘工程》1997,6(1):36-39
对国界定位导航系统中几种常见的辅助传感器所产生的误差进行了分析,导出了不同传感器的误差模型。这些误差模型是估计车辆位置的扩展卡尔曼滤波器的基础,同时也为选择适当的传感器提供了理论根据。  相似文献   

19.
“4D”技术及其应用   总被引:13,自引:0,他引:13  
介绍“4D”(即数字地面模型、数字正射影像、数字栅格地图和数字线划地图)系列产品的生产流程、关键技术、及其在耕地保护、防灾减灾救灾和城市规划等方面的应用方法。  相似文献   

20.
Abstract

Virtual Australia is not a well-defined or agreed concept. This discussion paper conceptualises Virtual Australia as a ‘virtual [digital] model containing and representing all non-trivial objects and their contextual environment – from blue sky to bedrock – in real world Australia’. It describes a scenario for Virtual Australia, one or two decades from now, in which the locations and conditions of non-trivial objects and their environment are updated automatically through a combination of remote sensing and wireless communication technologies in support of a ‘Supranet’. It then examines the concept of the ‘Supranet’ – a pervasive information network based largely on wireless technology linking the physical world to a virtual model in real time – and develops and discusses three principal characteristics of the Supranet: the ability to have or collect specific information (know); the ability to process information (think); and the ability to communicate that information. If, in the near future, any or all non-trivial devices are to some extent able to know, think and communicate, the potential for object autonomy will be realised.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号