共查询到20条相似文献，搜索用时 31 毫秒
1.
2.
CO2驱是一种能大幅度提高原油采收率的三次采油技术,国内该项技术的研究和应用起步较晚,多以先导试验为主。苏北盆地溱潼凹陷经过10余年的探索,已经在5个低渗油田开展了CO2驱先导试验和推广应用,针对这5个油藏利用一维细管模拟和油藏数值模拟方法开展了注气时机、段塞尺寸和注气部位的研究,并应用典型实例进行了分析,认为先期注入提高混相压力,可更有效地缩短两相区过渡带,增加油相中溶解的CO2含量,降低油相粘度和油气界面张力,进而提高混相程度,更有利于驱油;采用大尺寸段塞可加大CO2波及区域,较好地保持地层能量,从而提高油井见效率,增强驱替效果;高部位注气可有效地抑制重力超覆,减少CO2气体过早地产出和突破的机会。就苏北盆地低渗油藏而言,采用先期注入、大尺寸段塞和高部位注气不失为一种成熟有效的提高采收率方法。 相似文献
3.
In this paper the ability of analytical solutions for four-component three-phase flow to predict displacement efficiency in
water alternating gas (WAG) injection processes is studied. First analytical solutions for Riemann problems with injection
compositions that are the average water and gas mixture for various WAG injection schemes are presented. These solutions are
compared to numerical calculations with variable slug sizes and used to explore the effect of slug size, injecting water vs
gas first, and the average injection composition on displacement efficiency in compositional WAG schemes. The example model
is partially miscible WAG injection of water and CO2 into an oil reservoir containing C10 and CH4 with and without a mobile aqueous phase present initially. The trailing end of the water and gas profiles are sensitive to
whether water or gas is injected first, but the magnitude of the oil bank and the breakthrough time of the injected fluids
are accurately predicted by the analytical solutions, even for displacements where large water and gas slugs are injected.
Fluctuations in the saturation and composition profiles resulting from the alternating injection sequence in the WAG simulations
appear as super-imposed on top of the sequence of rarefaction and shock waves predicted by analytical solutions. As the number
of slugs increases, the effect of alternating boundary conditions diminishes and the displacements predicted by numerical
calculations converge to the analytical solutions. 相似文献
4.
我国海上稠油资源比较丰富,但由于受到海上条件等因素限制,聚合物驱成为提高海上稠油采收率的主要方法.因此深化聚合物溶液驱稠油微观渗流机理对于进一步提高采收率具有十分重要的意义.目前关于粘弹性聚合物渗流机理的理论研究主要局限于弹性聚合物溶液的单相流体在微观孔道内流动特征研究,而针对粘弹性聚合物、油两相流体渗流机理的研究甚少,特别是针对稠油聚合物驱的相关研究未见报道.为此,借助于计算方法较为成熟的OpenFOAM开源平台开展了聚合物驱稠油两相流体渗流机理的研究;以收缩孔道为微观物理模型,建立了粘弹性聚合物溶液、普通稠油两相渗流连续性方程、运动方程及本构方程,并采用VOF（volume of fluid）界面追踪方法建立两相界面相方程;以OpenFOAM开源平台为基础,开发了粘弹性流体、幂律流体两相流体求解器;绘制了不同弹性聚合物溶液在微观孔道内驱油的饱和度分布、速度分布及应力分布特征.结果表明,相对于水驱,纯粘性聚合物溶液前缘突破时间慢,波及面积大,驱油效率高.相比于同等粘度的纯粘性聚合物溶液,粘弹性聚合物的弹性有助于挖潜凸角内的残余油,聚合物溶液的弹性越大,稠油驱油效率越高.随着聚合物溶液弹性的增强,第一法向应力增大,当聚合物溶液进入到孔道突变处时,其弹性发挥的作用最大,法向应力的值最大.研究结果可为矿场实施聚合物驱设计、筛选聚合物溶液提供重要的理论支持. 相似文献
5.
In the development of oil and gas reservoirs, the transport of miscible fluids in porous rocks is a key issue for oil and gas recovery. The simplified unidirectional flow model is employed to investigate the effects of the viscosity ratio on dispersion in semi-infinite homogenous media. The viscosity is supposed to be unsteady due to changing component concentration over time. In cases of both a viscosity ratio larger and less than 1, the pollutant concentration and flow velocity are computed at different initial conditions and viscosity ratios. The analytical solutions are then developed by introducing new variables and transforming the equation governing advection–diffusion equation in semi-infinite homogeneous media with a continuous source. A comparison of the numerical solution with the analytical solution revealed a similarity over 98%, highlighting the usability of the analytical solution. If the viscosity ratio is larger than 1, flow velocity declines exponentially and concentration attenuates with transporting time. In addition, the timescale plays a significant role and the effects become more prominent in long-term transport. In the case of a viscosity ratio less than 1, both the timescale and viscosity ratio variables have little influence on the changing speed of the concentration profile. This work helps to predict the position and the time required to reach the harmless pollutant concentration when monitoring fracturing fluids transportation into groundwater system and would be especially useful in designing and interpreting laboratory experiments studying the miscible flow. 相似文献
6.
Tara Catherine LaForce 《Computational Geosciences》2012,16(4):1007-1020
In this work, the analytical and numerical solutions for modeling miscible gas and water injection into an oil reservoir are presented. Conservation laws with three levels of complexity are considered. Only the most complex model has the correct phase behavior for the example system, which is a multicontact miscible condensing gas drive with simultaneous water and gas injection. Example displacements in which one or both of the simpler models result in accurate simulations in a fraction of the computation time are presented, along with an example in which neither simplified thermodynamic model achieves a truly satisfactory result. A methodology is presented that can be used to establish the accuracy of simplified models in 1-D simulation based on convergence to analytical solutions for the full three-phase system. 相似文献
7.
CO_2-原油体系混相状态的渗流特性 总被引：1，自引：0，他引：1
为认识混相状态的CO2在油藏中的渗流特征,利用高温高压三维模拟装置对CO2-地层原油体系在油藏环境条件下的混相驱替过程进行研究.实验发现:模型产出液量与注入量存在较大差异;采收率、含水和气油比曲线亦表现出CO2在孔隙介质中渗流的复杂特征.由实时监测的含水饱和度分布场图分析认为:CO2与原油混相后,流体粘度降低、渗流阻力减小,这是提高采收率的重要原因之一;同时,CO2/原油相与部分接触水能形成近似于三相混相的状态.实验研究还表明CO2以高密度气体形式进入饱和水、饱和油无法进入的微孔隙,这是注入量和产出量不一致的主要原因. 相似文献
8.
为评价滨海地区海（咸）水入侵区不同类型地层渗透性,提出振荡试验适宜模型选择方法。利用Geoprobe系统对不同平面位置地层实施了气压式振荡试验,部分点位进行了分层测试;利用配线法计算地层渗透系数。结果表明:当试验目标层为承压含水层时,利用Butler模型分析欠阻尼振荡试验,KGS模型分析过阻尼振荡试验,均可获得良好的计算结果;当试验目标层为弱透水层时,KGS模型可用于过阻尼振荡试验的数据分析,但计算结果会受到相邻高渗透性含水层以及钻孔编录不准确的影响。地层渗透性等级未知条件下,需根据地层类型、介质岩性、测试井结构和水位恢复过程曲线特征选择适宜的振荡试验分析模型,以准确获取地层渗透系数值。 相似文献
9.
An analysis method for transient groundwater flow during slug tests performed in vertical cutoff walls is presented. The analytical solution for evaluating hydraulic conductivity of vertical cutoff walls is derived by applying the method of images to the previously developed analytical solution that is exclusively applicable to an infinite aquifer. Two distinct boundary conditions are considered to account for the configuration of the vertical cutoff wall: the wall‐soil formation interfaces with or without the existence of filter cakes, that is, constant‐head boundary and no‐flux boundary conditions. A series of type curves is constructed from the analytical solution and compared with those of a partially penetrated well within an aquifer. The constant‐head boundary condition provides faster hydraulic head recovery than the aquifer case. On the other hand, the no‐flux boundary condition leads to a delayed hydraulic head recovery. The greater the shape factor and well offset from the center of the cutoff wall, and the smaller the width of the cutoff wall, the greater the effect of the boundary condition observed in the type curves. This result shows the significance of considering proper boundary conditions at the vertical cutoff wall in analyzing slug tests. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
10.
11.
储层孔隙结构的非均质性导致水驱不均,不同大小孔隙（喉）之间形成优势渗流流动.在水驱开发中后期,剩余油高度分散在储层孔渗系统中难以启动,如何对孔隙尺度的水驱优势流动进行抑制的同时又确保不堵塞油流通道,使剩余油被高效采出,是当前提高石油采收率技术基础研究的主要方向.制作微观仿真储层孔隙结构与尺度的非均质性物理模型,开展了连续相驱替流体（聚合物溶液、交联聚合物凝胶）和微纳米柔性微凝胶颗粒水分散体系驱油机理的对比实验.实验表明,作为连续相的传统聚合物溶液依靠粘度无区分地增加大小孔隙中的流动阻力,从而赋予低渗层区小孔隙中的剩余油以驱动力,将这些剩余油携带采出,当粘度过大时,甚至难以启动剩余油;微凝胶颗粒分散液作为低粘水分散流体,其中的凝胶颗粒优先进入大孔隙,暂堵在喉道处并抑制相对大孔隙中的流动,同时注入水转向进入相对小的孔隙,将其中的剩余油活塞式推出,该过程在空间和时间上是不断重复的.本文从流度调整的角度对实验结果进行了分析,结果表明传统的连续相驱替流体是依靠提升注入水的粘度实现流度的调整,而微凝胶颗粒水分散体系是通过降低注入水的相对渗透率,并相对提高油相渗透率,从而实现对流度的高效调整. 相似文献
12.
本文简述了分形在下列几方面的研究成果,即沉积岩孔隙、岩石物性、油田构造和分布、粘滞指进与采油、油藏描述和评价、裂缝油藏。 相似文献
13.
Xavier Raynaud Knut-Andreas Lie Halvor Møll Nilsen Atgeirr Rasmussen 《Computational Geosciences》2016,20(3):495-507
Polymer injection is a widespread strategy in enhanced oil recovery. Polymer increases the water viscosity and creates a more favorable mobility ratio between the injected water and the displaced oil. The computational cost of simulating polymer injection can be significantly reduced if one splits the governing system of two-phase equations into a pressure equation and a set of saturation/component equations and use a Gauss–Seidel algorithm with optimal cell ordering to solve the nonlinear systems arising from an implicit discretization of the saturation/component equations. This approach relies on a robust single-cell solver that computes the saturation and polymer concentration of a cell, given the total flux and the saturation and polymer concentration of the neighboring cells. In this paper, we consider a relatively comprehensive polymer model used in an industry-standard simulator, and show that, in the case of a discretization using a two-point flux approximation, the single-cell problem always admits a solution that is also unique. 相似文献
14.
女34断块水平井提高采收率开发实践 总被引：1，自引：0，他引：1
舍女寺油田女34断块是大港油区典型的低渗透块状砂岩断块油藏，由于储层严重的非均质性，注水开发见效快、水淹快，并且形成油藏次生底水，作为水平井技术改善低渗透油藏开发效果的先导试验区块，经过深入地质研究和可行性论证，又相继完钻2口水平井，同时进行注采井网调整，编制了水平井和直井采油、直井注水的混合外网调整方案，方案实施后，断块采油速度由0．6％提高到2．6％，采收率提高8个百分点，开发效果显改善，实践证明水半井技术是改善低渗透非均质断块油藏开发效果的有效手段之一。 相似文献
15.
通常聚合物驱的最终采收率在50%左右,聚合物驱后剩余油具有相当的开采潜力。以大庆长垣北部多段多韵律聚驱主力油藏为例,采用化学驱油藏数值模拟技术,系统研究并总结了典型油藏聚驱后平面及纵向剩余油的分布特征。结果表明,聚驱后油藏剩余油的分布系统可划分为2大成因、3大区域和7个部位。其中:存在受地质因素制约的剩余油,如废弃河道中部、砂体尖灭区、相对孤立的薄差砂体;也有开发因素控制的剩余油,如厚油层顶部剩余油、注采不完善部位、注入井间与生产井附近以及聚驱后高渗层内的残余油。聚合物驱后油藏剩余油主要富集于3大区域内,究其原因则主要源于水驱和后续聚驱波及程度的不同。 相似文献
16.
为评价振荡试验在获取倾斜承压含水层水文地质参数过程中含水层倾角对计算结果的影响,基于Kipp模型推导了考虑承压含水层倾角的振荡试验解析解模型。倾斜承压含水层量纲一贮水系数和量纲一导水系数不变条件下,测试井-含水层系统的量纲一阻尼系数随着倾角的增加而增加。修正模型计算的量纲一阻尼系数与Kipp模型计算的量纲一阻尼系数偏差10%以上时,必须考虑倾角的影响并且承压含水层倾角对水头响应曲线造成影响临界角度约为34°。修正模型和Kipp模型对现场振荡试验水头响应曲线分析结果的差异表明,忽略含水层倾角会对倾斜承压含水层导水系数和贮水系数的计算结果产生较大误差。 相似文献
17.
Steam drive recovery of oil is an economical way of producing oil even in times of low oil prices and is used worldwide. This paper focuses on the one-dimensional setting, where steam is injected into a core initially containing oil and connate water while oil and water are produced at the other end. A three-phase (oil, water, steam) hot zone develops, which is abruptly separated from the two-phase (oil + water) cold zone by the steam condensation front. The oil, water and energy balance equations (Rankine–Hugoniot conditions) cannot uniquely solve the system of equations at the steam condensation front. In a previous study, we showed that two additional constraints follow from an analysis of the traveling wave equation representing the shock; however, within the shock, we assumed local thermodynamic equilibrium. Here we extend the previous study and include finite condensation rates; using that appropriate scaling requires that the Peclet number and the Damkohler number are of the same order of magnitude. We give a numerical proof, using a color-coding technique, that, given the capillary diffusion behavior and the rate equation, a unique solution can be obtained. It is proven analytically that the solution for large condensation rates tends to the solution obtained assuming local thermodynamic equilibrium. Computations with realistic values to describe the viscous and capillary effects show that the condensation rate can have a significant effect on the global saturation profile, e.g. the oil saturation just upstream of the steam condensation front. 相似文献
18.
Bilal Rashid Astor-Lonice Bal Glyn J. J. Williams Ann H. Muggeridge 《Computational Geosciences》2012,16(2):409-422
The vorticity of the displacement velocity is used to derive dimensionless numbers that can be used to quantify the relative
importance of viscosity ratio, gravity, diffusion/dispersion and permeability heterogeneity on secondary hydrocarbon recovery.
Using this approach, a new objective measure of the impact of permeability and porosity heterogeneity on reservoir performance
is obtained. This is used, in conjunction with other dimensionless numbers, to analyse the relative impact of heterogeneity,
buoyancy effects, mobility ratio and dispersion on breakthrough time and recovery at 1 pore volume injected during first contact
miscible gas injection. This is achieved using results obtained from detailed simulation of miscible displacements through
a range of geologically realistic reservoir models. This study goes some way towards developing a unified mathematical framework
to determine under which flow conditions reservoir heterogeneity becomes more important than other physical processes. We
propose that comparison of these dimensionless numbers can be used to identify the key factors controlling recovery and thus
assist the engineer in determining appropriate enhanced oil recovery techniques to improve recovery. 相似文献
19.
Because of their simplicity, assumptions of isotropy and homogeneity are often applied to slug test analyses, determining hydraulic conductivity of heterogeneous and anisotropic formations, in spite of their inherent unfitness. In this study, it was examined how anisotropy and heterogeneity of the formation affect well recovery curves and therefore estimates of hydraulic conductivity in slug tests. Using a finite element method (FEM) slug test model, several hypothetical slug tests in anisotropic and heterogeneous formations with known hydraulic parameters and actual formations of unknown parameters were analyzed. Error factors as a result of the assumptions of isotropy and homogeneity were quantified through sensitivity analyses of well recovery curves. Results of slug tests analyzed in this study indicate that: (1) the well recovery curves in slug tests do not show unique shape or signs reflecting the anisotropy and heterogeneity of the tested formation; (2) the assumption of isotropy does not deviate estimates of hydraulic conductivity significantly when the radial hydraulic conductivity is larger than the vertical one in the formation; (3) the assumption of homogeneity in a layered heterogeneous system has a high potential for errors in hydraulic conductivity estimation, however it can be avoided by placing the screened section apart from the adjacent layers; (4) a low permeability well skin skews the hydraulic conductivity of the original formation, depending on the size and hydraulic conductivity of the skin. 相似文献
20.
Two or more different fluids generally saturate chalk in oil reservoir, and therefore its behaviour can be very complicated. In this paper, a constitutive law is proposed for modelling the mechanical behaviour of a chalk saturated by two non‐miscible fluids, water and oil. The effects of the capillary pressure or suction are taken into account. They are considered as an independent variable, as in the Barcelona's basic model developed for unsaturated soils. On the other hand, internal friction and pore collapse are modelled as independent mechanisms. The determination of the parameters is based on triaxial and oedometer tests. Finally, in order to validate the model, predictions are compared with experimental results of water‐flooding test. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献