共查询到20条相似文献，搜索用时 62 毫秒
1.
A three-dimensional (3D) large-eddy-simulation model with macroscopic model equations of porous flow is proposed to investigate solitary waves interacting with permeable breakwaters. The major objective of this paper is twofold. First, we seek to evaluate the present model through the comparison with available simulated and measured data in the literature. The second aim, given the 3D nature of flow past a permeable breakwater, the variations of permeable breakwater modeled on both macroscopic and microscopic scales are examined. First validation is carried out with experiments on solitary wave propagation in a 3D wave basin and then runup on a vertical permeable breakwater with a gap in the lateral direction. A satisfactory agreement on the free surface elevation time series is obtained between model and measured results. Second, we replicate the experiments on a solitary wave interaction with a submerged permeable breakwater in a two-dimensional narrow wave flume. The porous medium is composed of spheres with a uniform size and arranged in a non-staggered regular pattern such that the porous medium can thus be modeled on macroscopic and microscopic scales. The numerical calculations indicate that the results obtained with macroscopic and microscopic modeling both fit the measurements fairly well in terms of the free surface elevations and velocity fields. Specifically, the microscopic modeling better simulates detailed phenomena such as flow injection from the porous medium and the initial stage of the formation of the main vortex in the leeward face of the obstacle. After the solitary wave completely propagates over the permeable object, the discrepancies between macroscopic and microscopic model results are insignificant. More accurate 3D results are used to determine the trajectories of fluid particles around the porous object to help understand the possible sediment movements in suspensions. 相似文献
2.
《Coastal Engineering》2002,46(1):25-50
A mathematical model based on the Volume-Averaged/Reynolds Averaged Navier-Stokes (VARANS) equations is developed to describe surface wave motions in the vicinity of a coastal structure, which could be either a rigid solid structure or a permeable structure or a combination of both. In the VARANS equations, the volume-averaged Reynolds stress is modeled by adopting the nonlinear eddy viscosity assumption. The model equations for the volume-averaged turbulent kinetic energy and its dissipation rate are derived by taking the volume-average of the standard k−ϵ equations. Because of the volume-averaging process, the effects of the small-scale turbulence in porous media are introduced. The performance of the model is checked by comparing numerical solutions with the experimental data related to a composite breakwater reported by Sakakiyama and Liu [Coast. Eng. 121 (2001) 117]. 相似文献
3.
《Coastal Engineering》2006,53(5-6):441-462
The structure of large-scale turbulence under a broken solitary wave on a 1 in 50 plane slope was studied. Three-component velocity measurements were taken at different heights above a smooth bed in the middle surf zone using an acoustic Doppler velocimeter. The measured data showed that turbulent velocity components were well correlated in the middle part of the water column. The velocity correlations could be produced by an oblique vortex similar to the obliquely descending eddy observed previously by other investigators. The vertical distributions of the relative values of the components of the Reynolds stress tensor showed that the structure of turbulence evolved continuously between the free surface and the bottom. The evolution was related to transition from two-dimensional to three-dimensional flow structures and the effect of the solid bottom on flow structures. Time histories of measured turbulent kinetic energy and turbulence stresses showed episodic turbulent events near the free surface but more sporadic turbulence in the lower layer. Large or intense turbulent events were found to have short duration and time lag relative to the wave crest point. These events also maintained good correlations between the turbulence velocity components close to the bottom.Instantaneous turbulent velocity fields were measured near the bottom at the same cross-shore location by using a stereoscopic particle image velocimetry system. These measurements showed that the near-bed flow field was characterized by large-scale, coherent flow structures that were the sources of most of the turbulent kinetic energy and turbulence stresses. The types of organized flow structures observed included vortices and downbursts of turbulence descending directly from above, lateral spreading of turbulent fluid along the bed, and formation of vortices in shear layers between fluid streams. A common feature of the organized flow structures near the bed was the large turbulence velocities in the longitudinal and transverse directions, which reflected the influence of a solid bottom on the breaking-wave-generated turbulence arriving at the bed. 相似文献
4.
The characteristics of wave and turbulence velocities created by a broad-banded irregular wave train breaking on a 1:35 slope were studied in a laboratory wave flume. Water particle velocities were measured simultaneously with wave elevations at three cross-shore locations inside the surf zone. The measured data were separated into low-frequency and high-frequency time series using a Fourier filter. The measured velocities were further separated into organized wave-induced velocities and turbulent velocity fluctuations by ensemble averaging. The broad-banded irregular waves created a wide surf zone that was dominated by spilling type breakers. A wave-by-wave analysis was carried out to obtain the probability distributions of individual wave heights, wave periods, peak wave velocities, and wave-averaged turbulent kinetic energies and Reynolds stresses. The results showed that there was a consistent increase in the kurtosis of the vertical velocity distribution from the surface to the bottom. The abnormally large downward velocities were produced by plunging breakers that occurred from time to time. It was found that the mean of the highest one-third wave-averaged turbulent kinetic energy values in the irregular waves was about the same as the time-averaged turbulent kinetic energy in a regular wave with similar deep-water wave height to wavelength ratio. It was also found that the correlation coefficient of the Reynolds stress varied strongly with turbulence intensity. Good correlation between u′ and w′ was obtained when the turbulence intensity was high; the correlation coefficient was about 0.3–0.5. The Reynolds stress correlation coefficient decreased over a wave cycle, and with distance from the water surface. Under the irregular breaking waves, turbulent kinetic energy was transported downward and landward by turbulent velocity fluctuations and wave velocities, and upward and seaward by the undertow. The undertow in the irregular waves was similar in vertical structure but lower in magnitude than in regular waves, and the horizontal velocity profiles under the low-frequency waves were approximately uniform. 相似文献
5.
A boundary layer flow under spilling breakers in a laboratory surf zone with a smooth bottom is investigated using a high resolution particle image velocimetry (PIV) technique. By cross-correlating the images, oscillatory velocity profiles within a viscous boundary layer of O(1) mm in thickness are resolved over ten points. Using PIV measurements taken for an earlier study and the present study, flow properties in the wave bottom boundary layer (WBBL) over the laboratory surf zone are obtained, including the mean velocities, turbulence intensity, Reynolds stresses, and intermittency of coherent events. The data are then used to estimate the boundary layer thickness, phase variation, and bottom shear stress. It is found that while the time averaged mass transport inside the WBBL is onshore in the outer surf zone, it changes to offshore in the inner surf zone. The zero Eulerian mass transport occurs at h/hb ≈ 0.92 in the outer surf zone. The maximum overshoot of the streamwise velocity and boundary layer thickness are not constant across the surf zone. The bottom shear stress is mainly contributed by the viscous stress through mean velocity gradient while the Reynolds stress is small and negligible. The turbulence level is higher in the inner surf zone than that in the outer surf zone, although only a slight increase of turbulent intensity is observed inside the WBBL from the outer surf zone to the inner surf zone. The variation of phase inside and outside the WBBL was examined through the spatial velocity distribution. It is found the phase lead is not constant and its value is significantly smaller than previous thought. By analyzing instantaneous velocity and vorticity fields, a remarkable number of intermittent turbulent eddies are observed to penetrate into the WBBL in the inner surf zone. The size of the observed large eddies is about 0.11 to 0.16 times the local water depth. Its energy spectra follow the − 5/3 slope in the inertial subrange and decay exponentially in the dissipation subrange. 相似文献
6.
为了研究波浪与抛石潜堤相互作用过程中大自由表面变形和堤内渗流等强非线性紊流运动问题,利用改进的MPS法,建立了模拟波浪与抛石潜堤相互作用的MPS法数值计算模型。模型将抛石潜堤假定为均质多孔介质,采用Drew的二相流运动方程描述多孔介质内外的流体运动;通过在动量方程中增加非线性阻力项,并引入亚粒子尺度紊流模型,模拟波浪与可渗结构物相互作用过程中的紊流运动。选取“U”型管中多孔介质内渗流过程和孤立波与可渗潜堤相互作用两个典型的渗流问题,通过将数值计算结果与理论解和实测值的对比分析,对所提出的MPS法紊流渗流模型的模拟精度进行验证。结果表明:基于改进的MPS法构建的垂向二维紊流渗流模型可以很好地再现“U”型管中多孔介质内渗流以及波浪作用下可渗潜堤内外的复杂流场,显著缓解流-固界面处的压力震荡与粒子分布不均匀问题,实现了较高的模拟精度。 相似文献
7.
A new coupling model of wave interaction with porous medium is established in which the wave field solver is based on the two dimensional Reynolds Averaged Navier-Stokes (RANS) equations with a kε closure. Incident waves, which could be linear waves, cnoidal waves or solitary waves, are produced by a piston-type wave maker in the computational domain and the free surface is traced through the Piecewise Linear Interface Construction-Volume of Fluid (PLIC-VOF) method. Nonlinear Forchheimer equations are adopted to calculate the flow field within the porous media. By introducing a velocity–pressure correction equation, the wave field and the porous flow field are highly and efficiently coupled. The two fields are solved simultaneously and no boundary condition is needed at the interface of the internal porous flow and the external wave. The newly developed numerical model is used to simulate wave interaction with porous seabed and the numerical results agree well with the experimental data. The additional numerical tests are also conducted to study the effects of seabed thickness, porosity and permeability coefficient on wave damping and the pore water pressure responses. 相似文献
8.
Numerical study on the characteristics of flow field and wave propagation near submerged breakwater on slope 总被引：2，自引：1，他引：1
In this study,characteristics of flow field and wave propagation near submerged breakwater on a sloping bed are investigated with numerical model. The governing equations of the vertical twodimensional model are Reynolds Averaged Navier Stokes equations. The Reynolds stress terms are closed by a nonlinear k ε turbulence transportation model. The free surface is traced through the PILC-VOF method. The proposed numerical model is verified with experimental results. The numerical result shows that the wave profile may become more asymmetrical when wave propa-gates over breakwater. When wave crest propagates over breakwater,the anticlockwise vortex may generate. On the contrary,when wave hollow propagates over breakwater,the clockwise vortex may generate. Meanwhile,the influenced zone of vortex created by wave crest is larger than that created by wave hollow. All the maximum values of the turbulent kinetic energy,turbulent dissi-pation and eddy viscosity occur on the top of breakwater. Both the turbulent dissipation and eddy viscosity increase as the turbulent kinetic energy increases. Wave energy may rapidly decrease near the breakwater because turbulent dissipation increases and energy in lower harmonics is transferred into higher harmonics. 相似文献
9.
《Coastal Engineering》2001,44(1):13-36
Interactions between a solitary wave and a submerged rectangular obstacle are investigated both experimentally and numerically. The Particle Image Velocimetry (PIV) technique is used to measure the velocity field in the vicinity of the obstacle. The generation and evolution of vortices due to flow separation at the corners of the obstacle are recorded and analyzed. It is found that although the size of the vortex at the weatherside of the obstacle is smaller than that at the leeside, the turbulence intensity is, however, stronger. A numerical model, based on the Reynolds Averaged Navier–Stokes (RANS) equations with a k–ϵ turbulence model, is first verified with the measurements. Overall, the agreement between the numerical results and laboratory velocity measurements is good. Using the RANS model, a series of additional numerical experiments with different wave heights and different heights of the rectangular obstacle are then performed to test the importance of the energy dissipation due to the generation of vortices. The corresponding wave transmission coefficient, the wave reflection coefficient and the energy dissipation coefficient are calculated and compared with solutions based on the potential flow theory. As the height of the obstacle increases to D/h=0.7, the energy dissipation inside the vortices can reach nearly 15% of the incoming wave energy. 相似文献
10.
The instantaneous turbulent velocity field produced by a broken solitary wave propagating on a 1 in 50 plane slope was measured in the longitudinal transverse plane in the middle part of the water column and near the bottom using a stereoscopic particle image velocimetry system. These measurements showed that large-scale turbulence first arrived in the form of a downburst of turbulent fluid. In the middle of the water column, the downbursts arrived shortly after the wave crest had passed. Each downburst was accompanied by two counter-rotating vortices. The latter grew rapidly in size to become a prominent feature of the flow field. Each vortex had a typical length scale of 1/2 to 1 water depth, and carried most of the turbulent kinetic energy in the region between the vortices. Near the bottom, the counter-rotating vortices were not as well defined and covered only a small plane area compared to the entire flow structure. The turbulent fluid descending from above diverged at the bed and the resulting flow structure developed an elongated shape as the source of down-flow travelled onshore with the broken wave. It was found that the transverse spacing between adjacent downbursts ranged from 2 to 5 times the local still water depth. Since vortices cannot end in the interior of the fluid, the counter-rotating vortices must extend to the free surface in the form of a vortex loop. It was suggested that these vortex loops were produced by bending and stretching of primary vorticity generated in the wave breaking process, possibly as a result of three-dimensional water surface deformation. The vortex loops were then carried downward by the falling water from the broken wave. 相似文献
11.
《Coastal Engineering》2005,52(3):257-283
Vortex generation and evolution due to flow separation around a submerged rectangular obstacle under incoming cnoidal waves is investigated both experimentally and numerically. The Particle Image Velocimetry (PIV) technique is used in the measurement. Based on the PIV data, a characteristic velocity, phrased in terms of incoming wave height, phase speed, dimension of the obstacle, and a local Reynolds number are proposed to describe the intensity of vortex. The numerical model, which solves the two dimensional Reynolds Averaged Navier Stokes (RANS) equations, is used to further study the effects of wave period on the vortex intensity. Measurements for the mean and turbulent velocity fields further indicate that the time history of the intensity of fluid turbulence is closely related to that of the vortex intensity. 相似文献
12.
《Coastal Engineering》2004,51(1):53-80
In this paper, a two-dimensional multi-scale turbulence model is proposed to study breaking waves. The purpose of developing this model is to produce a relatively accurate model with moderate computer requirements. The free surface is tracked by the VOF technique, the log-law profile for the mean velocity is applied at the bottom. Comparing with the Reynolds-Averaged Navier-Stokes models (RANS), the present model shows improving agreement with experimental measurements in terms of surface elevations, particle velocities, wave height distributions and undertow profiles. The subgrid scale (SGS) turbulent transport mechanism is also discussed in the paper. It is found that turbulent production and dissipation are of the same order, but turbulent production is primarily located at the wavefront and above the wave trough, whereas turbulent dissipation is primarily located at the back face of a wave, indicating that in these regions, the assumption of equilibrium is not correct. Below the trough level, the local equilibrium assumption is reasonable. Turbulent convection and diffusion are of the same order at the trough level. Above the trough level, turbulent convection dominates. Under the spilling breaking wave, turbulent kinetic energy is continue to dissipate in the bore region, whereas under the plunging breaking wave, the turbulent kinetic energy is dissipated very rapidly within one wave period. 相似文献
13.
Numerical simulations are performed to investigate the influence of variable front slopes on flow evolution and waveform inversion of a depression ISW (internal solitary wave) over an idealized shelf with variable front slopes. A finite volume based on Cartesian grid method is adopted to solve the Reynolds averaged Navier-Stokes equations using a k-ε model for the turbulent closure. Numerical results exhibit the variations of several pertinent properties of the flow field, in the case with or without waveform inversion on the horizontal plateau of an obstacle. The clockwise vortex is stronger than the counterclockwise one, almost throughout the wave-obstacle interaction. Analysis of the turbulent energy budget reveals that the turbulent production term in the governing equations dominates the wave evolution during a wave-obstacle interaction; otherwise the buoyancy production term and the dissipation term due to viscosity within turbulent eddies play a major role in energy dissipation. In addition, the front slope affects mainly the process and reflection of the wave evolution but has less influence than other physical parameters. Moreover, total wave energy of the leading crest is smaller than that of the leading trough even in the cases with waveform inversion on the plateau. 相似文献
14.
15.
A recently developed fully explicit algebraic model of Reynolds stress and turbulent heat flux in a thermally stratified planetary atmospheric boundary layer without stratification has been used for a numerical study of the Ekman turbulent boundary layer over a homogeneous rough surface for different dimensionless surface Rossby numbers. A comparative analysis has been conducted for a closure model of the transport term in the prognostic equation of turbulent kinetic energy dissipation including third-order moments. Dependences of the total wind rotation angle on the Rossby number have been obtained. The calculated vertical profiles of mean velocity, turbulent stress, turbulent kinetic energy, surface-friction velocity, and boundary-layer height agree satisfactorily with observational and earlier obtained LES data. 相似文献
16.
内波破碎引起的能量耗散和混合是海洋内部的重要物理过程。通过在二维内波水槽进行实验室实验,分析内波与地形的作用,探究内孤立波与平顶海山地形作用时波要素、能量以及湍耗散率的时空变化。本实验利用重力塌陷法在两层流体中制造第一模态内孤立波,通过粒子图像测速技术(particle image velocimetry, PIV)获得内孤立波与地形作用时的流场结构,定量分析整个作用过程。结果表明,地形会改变波形甚至引起破碎,内波与地形作用时,振幅和能量密度会在内孤立波爬坡时迅速增大,在地形前缘产生强烈能量耗散。入射波的能量与塌陷高度呈二次函数关系,透射波能量随地形升高减小,反射波能量随地形升高增大。地形前缘局地湍耗散率极值时间序列在部分实验中呈双峰结构,对应内孤立波界面处剪切加强引起湍流耗散和波后缘翻转破碎。破碎引起的地形前缘区域平均湍耗散率量级在10~(-5)m~2/s~3,局地湍耗散率极值与入射波振幅呈指数关系,所有实验中局地湍耗散率的最大值接近10~(-3) m~2/s~3量级。 相似文献
17.
The instantaneous turbulent velocity field created by the breaking of spilling regular waves on a plane slope was measured in a plane running parallel to the slope using particle image velocimetry. The measurement plane was located at a height of about 1 mm above the bed. The measurement area encompassed the region where the large eddies generated at incipient wave breaking impinged on the bottom inside the surf zone. A total of 30 trials were conducted under identical experimental conditions. In each trial, six consecutive wave cycles were recorded. The measured velocity fields were separated into a mean flow and a turbulence component by ensemble averaging. The instantaneous turbulent velocity fields were analyzed to determine the occurrence frequency, location, geometry and evolution of the large eddies, and their contributions to instantaneous shear stresses, turbulent kinetic energy and turbulence energy fluxes. The motion of single glass spheres along the bed was also investigated. The two-phase flow measurements showed that the velocity and displacement of large solid particles on a smooth bed were significantly affected by the magnitude and direction of turbulence velocities. Overall, this study has examined the kinematic and dynamic properties of large eddies impinging on the bed and the interaction of these large-scale turbulent flow structures with the mean flow. The study has also highlighted the important role of large eddies in sediment transport. 相似文献
18.
A laboratory study on the turbulence and wave energy dissipations of spilling breakers in a surf zone is presented. Instantaneous velocity fields of propagating breaking waves on a 1/20 slope were measured using Particle Image Velocimetry (PIV). Due to the large region of the evolving wave breaking generated turbulent flow, seven PIV fields of view (FOVs) were mosaicked to form a continuous flow field in the surf zone. Mean and turbulence quantities were extracted by ensemble averaging 25 repeated instantaneous measurements at each FOV. New results for distribution and evolution of turbulent kinetic energy, mean flow energy, and total energy across the surf zone were obtained from analyzing the data. The turbulence dissipation rate was estimated based on several different approaches. It was found that the vertical distribution of the turbulence dissipation rate decays exponentially from the crest level to the bottom. The resulting energy budget and energy flux were also calculated. The calculated total energy dissipation rate was compared to that based on a bore approximation. It was found that the ratio of turbulence dissipation rate to total energy dissipation rate was about 0.01 in the outer surf zone and increased to about 0.1 after the breaking waves transformed into developed turbulent bores in the inner surf zone. 相似文献
19.
The three-dimensional numerical model with σ-coordinate transformation in the vertical direction is applied to the simulation of surface water waves and wave-induced laminar boundary layers. Unlike most of the previous investigations that solved the simplified one-dimensional boundary layer equation of motion and neglected the interaction between boundary layer and outside flow, the present model solves the full Navier–Stokes equations (NSE) in the entire domain from bottom to free surface. A non-uniform mesh system is used in the vertical direction to resolve the thin boundary layer. Linear wave, Stokes wave, cnoidal wave and solitary wave are considered. The numerical results are compared to analytical solutions and available experimental data. The numerical results agree favorably to all of the experimental data. It is found that the analytical solutions are accurate for both linear wave and Stokes wave but inadequate for cnoidal wave or solitary wave. The possible reason is that the existing analytical solutions for cnoidal and solitary waves adopt the first-order approximation for free stream velocity and thus overestimate the near bottom velocity. Besides velocity, the present model also provides accurate results for wave-induced bed shear stress. 相似文献
20.
《Coastal Engineering》1999,36(2):111-146
A numerical model based upon a low Reynolds number turbulence closure is proposed to study Reynolds number variation in reciprocating oscillatory boundary layers. The model is used to compute the boundary layer for flow regimes ranging from smooth laminar to rough turbulent. Criteria for fully developed turbulence are derived for walls of the smooth and rough types. In particular, a new criterion to identify the rough turbulent regime is determined based on the time-averaged turbulence intensity. The reliability of the present model is assessed through comparisons with detailed experimental data collected by other investigators. The model globally improves upon standard high Reynolds number closures. Variation through the wave cycle of the main flow variables (ensemble-averaged velocity, shear stress, turbulent kinetic energy) is remarkably well-predicted for smooth walls. Predictions are satisfactory for rough walls as well. Yet, the turbulence level in the rough turbulent regime is overpredicted in the vicinity of the bed. 相似文献