首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Results are presented from a numerical simulation of three‐dimensional flow hydraulics around a mid‐channel bar carried out using the FLUENT/UNS computational fluid dynamics (CFD) software package. FLUENT/UNS solves the three‐dimensional Reynolds‐averaged form of the Navier–Stokes equations. Turbulence closure is achieved using a RNG k–ϵ model. Simulated flow velocities are compared with measured two‐dimensional velocities (downstream and cross‐stream) obtained using an electromagnetic current meter (ECM). The results of the simulation are qualitatively consistent with the flow structures observed in the field. Quantitative comparison of the simulated and measured velocity magnitudes indicates a strong positive correlation between the two (r=0·88) and a mean difference of 0·09 m s−1. Deviations between simulated and measured velocities may be identified that are both random and systematic. The former may reflect a number of factors including subgrid‐scale natural spatial variability in flow velocities associated with local bed structures and measurement uncertainty resulting from problems of ECM orientation. Model mesh configuration, roughness parameterization and inlet boundary condition uncertainty may each contribute to systematic differences between simulated and measured flow velocities. These results illustrate the potential for using CFD software to simulate flow hydraulics in natural channels with complex configurations. They also highlight the need for detailed spatially distributed datasets of three‐dimensional flow variables to establish the accuracy and applicability of CFD software. Copyright © 1999 John Wiley & Sons, Ltd.  相似文献   

2.
Submerged aquatic vegetation affects flow, sediment and ecological processes within rivers. Quantifying these effects is key to effective river management. Despite a wealth of research into vegetated flows, the detailed flow characteristics around real plants in natural channels are still poorly understood. Here we present a new methodology for representing vegetation patches within computational fluid dynamics (CFD) models of vegetated channels. Vegetation is represented using a Mass Flux Scaling Algorithm (MFSA) and drag term within the Reynolds‐averaged Navier–Stokes Equations, which account for the mass and momentum effects of the vegetation, respectively. The model is applied using three different grid resolutions (0.2, 0.1 and 0.05 m) using time‐averaged solution methods and compared to field data. The results show that the model reproduces the complex spatial flow heterogeneity within the channel and that increasing the resolution leads to enhanced model accuracy. Future applications of the model to the prediction of channel roughness, sedimentation and key eco‐hydraulic variables are presented, likely to be valuable for informing effective river management. © 2016 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.  相似文献   

3.
A field‐based project was initiated in order to characterize velocities and sediment entrainment in a forced‐pool and riffle sequence. Three‐dimensional velocities and turbulence intensities were measured with an acoustic Doppler velocimeter at 222 different points at three similar flows that averaged approximately 4·35 m3 s−1 within a large pool–riffle unit on North Saint Vrain Creek, Colorado. Sediment‐sorting patterns were observed with the introduction of 500 tracer particles painted according to initial seeding location. Tracer particles moved sporadically during a 113 day period in response to the annual snowmelt peak flow, which reached a maximum level of 14·8 m3 s−1. Velocity data indicate high instantaneous velocities and turbulence levels in the centre of pools. Patterns of sediment deposition support the notion that stream competence is higher in the pool than the downstream riffle. Flow convergence around a large channel constriction appears to play a major role in multiple processes that include helical flow development and sediment routing, and backwater development with low velocities and turbulence levels above the constriction that may locally limit sediment supply. Jet flow, flow separation, vortex scour and turbulence generation enhance scour in the centre of pools. Ultimately, multiple processes appear to play some role in maintenance of this forced pool and the associated riffle. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

4.
Intensive field monitoring of a reach of upland gravel‐bed river illustrates the temporal and spatial variability of in‐channel sedimentation. Over the six‐year monitoring period, the mean bed level in the channel has risen by 0·17 m with a maximum bed level rise of 0·5 m noted at one location over a five month winter period. These rapid levels of aggradation have a profound impact on the number and duration of overbank flows with flood frequency increasing on average 2·6 times and overbank flow time increasing by 12·8 hours. This work raises the profile of coarse sediment transfer in the design and operation of river management, specifically engineering schemes. It emphasizes the need for the implementation of strategic monitoring programmes before engineering work occurs to identify zones where aggradation is likely to be problematic. Exploration of the sediment supply and transfer system can explain patterns of channel sedimentation. The complex spatial, seasonal and annual variability in sediment supply and transfer raise uncertainties into the system's response to potential changes in climate and land‐use. Thus, there is a demand for schemes that monitor coarse sediment transfer and channel response. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

5.
The general nature of bulk flow within bedrock single‐channel reaches has been considered by several studies recently. However, the flow structure of a bedrock‐constrained, large river with a multiple channel network has not been investigated previously. The multiple channel network of the Siphandone wetlands in Laos, a section of the Mekong River, was modelled using a steady one‐dimensional hydraulic model. The river network is characterized by a spatially‐varying channel‐form leading to significant changes in the bulk flow properties between and along the channels. The challenge to model the bulk flow in such a remote region was the lack of ideal boundary conditions. The flow models considered both low flow, high inbank and overbank flows and were calibrated using SPOT satellite sensor imagery and limited field data concerning water levels. The application of the model highlighted flow characteristics of a large multi‐channel network and also further indicated the field data that would be required to properly characterize the flow field empirically. Important results included the observation that adjacent channels within the network had different water surface slopes for the same moments in time; thus calibration data for modelling similar systems needs to account for these significant local differences. Further, the in‐channel hydraulic roughness coefficient strongly varied from one cross‐section to the next (Manning's ‘n’ range: 0·01 to 0·10). These differences were amplified during low flow but persisted in muted form during high discharges. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

6.
In this paper, we present a methodology to construct a sediment budget for meso‐scale catchments. We combine extensive field surveys and expert knowledge of the catchment with a sediment delivery model. The meso‐scale Mediterranean drainage basin of the Dragonja (91 km2), southwest Slovenia, was chosen as case study area. During the field surveys, sheet wash was observed on sloping agricultural fields during numerous rainfall events, which was found to be the main source of sediment. With the sediment yield model WATEM/SEDEM the estimated net erosion on the hillslopes 4·1 t ha–1 y–1 (91% of inputs). The second source, bank erosion (4·2%; 0·25 t ha–1 y–1) was monitored during several years with erosion pins and photogrammetric techniques. The last source, channel incision, was derived from geomorphological mapping and lichenomery and provided 3·8% (0·17 t ha–1 y–1) of the sediment input. The river transports its suspended sediment mainly during high‐flow events (sampled with automated water samplers). About 27% (1·2 t ha–1 y–1) of the sediment delivered to the channel is deposited on floodplains and low terraces downstream (estimated with geomorphological mapping, coring and cesium‐137 measurements). The sediment transported as bedload disintegrates during transport to the outlet due to the softness of the bedrock material. As a result, the river carries no bedload when it reaches the sea. The results imply a build‐up of sediment in the valleys catchment. However, extreme flood events may flush large amounts of sediment stored in the lower parts of the system. Geomorphological evidence exists in the catchment that such high magnitude, low frequency events have happened in the past. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

7.
Steep erosion‐prone and vegetation‐free slopes are widespread in alpine areas and are often discussed since they have a high socio‐economic damage potential. We present an eco‐engineering approach to test whether a mycorrhizal inoculum improves the establishment of hedge brush layers and in turn soil structural stability on a steep, coarse‐grained vegetation‐free slope in the eastern Swiss Alps. We established (i) mycorrhizal and (ii) non‐mycorrhizal treated eco‐engineered research plots on a field experimental scale, covering a total area of approximately 1000 m2 on an east‐northeast (ENE) exposed slope, where many environmental parameters can be regarded as homogeneous. After a full vegetation period, we quantified soil aggregate stability, the formation of water stable aggregates and the fine‐root development. Our results illustrate that the establishment of brush layers without mycorrhizal inoculum increased aggregate stability significantly. Against our expectation and glasshouse experiments, the addition of mycorrhizal inoculum did not have a statistically significant effect after one vegetation period although it tended to increase aggregate stability. Analogously, root length density (RLD) tended to be higher at the non‐mycorrhizal treated site. Aggregate stability was significantly correlated with RLD. Studies on a bigger field experimental scale are inevitable, complement glasshouse studies and lead to a better understanding for a successful application of sustainable eco‐engineering measures in alpine environments. Based on our results and considering the fact that the response time in natural ecosystems may be slower than in laboratory approaches, we conclude that long‐term field studies are necessary to validate results gained through laboratory experiments. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

8.
The caesium‐137 method of quantifying soil erosion is used to provide field data for validating the capability of the SHETRAN modelling system for predicting long‐term (30‐year) erosion rates and their spatial variability. Simulations were carried out for two arable farm sites (area 3–5 ha) in central England for which average annual erosion rates of 6·5 and 10·4 t ha?1 year?1 had already been determined using caesium‐137 measurements. These rates were compared with a range of simulated values representing the uncertainty in model output derived from uncertainty in the evaluation of model parameters. A successful validation was achieved in that the simulation range contained the measured rate at both sites, whereas the spatial variability was reproduced excellently at one site and partially at the other. The results indicate that, as the caesium‐137 technique measures the erosion caused by all the processes acting at a site, it is relevant to hydrologically based models such as SHETRAN only if erosion by wind, agricultural activities and other processes not represented in the model are insignificant. The results also indicate a need to reduce the uncertainty in model parameter evaluation. More generally, the caesium‐137 technique is shown to provide field data that improve the severity of the validation procedure (accounting for internal as well as outlet conditions) and that add spatial variability to magnitude as a condition for identifying unrealistic parameter sets when seeking to reduce simulation uncertainty. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

9.
A large weighing lysimeter was installed at Yucheng Comprehensive Experimental Station, north China, for evapotranspiration and soil‐water–groundwater exchange studies. Features of the lysimeter include the following: (i) mass resolution equivalent to 0·016 mm of water to accurately and simultaneously determine hourly evapotranspiration, surface evaporation and groundwater recharge; (ii) a surface area of 3·14 m2 and a soil profile depth of 5·0 m to permit normal plant development, soil‐water extraction, soil‐water–groundwater exchanges, and fluctuations of groundwater level; (iii) a special supply–drainage system to simulate field conditions of groundwater within the lysimeter; (iv) a soil mass of about 30 Mg, including both unsaturated and saturated loam. The soil consists mainly of mealy sand and light loam. Monitoring the vegetated lysimeter during the growing period of winter wheat, from October 1998 through to June 1999, indicated that during the period groundwater evaporation contributed 16·6% of total evapotranspiration for a water‐table depth from 1·6 m to 2·4 m below ground surface. Too much irrigation reduced the amount of upward water flow from the groundwater table, and caused deep percolation to the groundwater. Data from neutron probe and tensiometers suggest that soil‐water‐content profiles and soil‐water‐potential profiles were strongly affected by shallow groundwater. Copyright © 2000 John Wiley & Sons, Ltd.  相似文献   

10.
Due to the occurrence of ponding during the period of rice growth, the analyses of rainfall‐runoff in paddy fields are different from those in general lands. The diffusive tank model has been successfully applied in rainfall‐runoff simulations in paddy fields because it can well describe the features of the local water flow. In most of the applications of this model, although the determination of the related model parameters is important, detailed investigations on each individual parameter are definitely needed to improve the accuracy of the results. In the study, an improved procedure is proposed to determine certain variables involved in the diffusive tank model and the application is conducted in a field area in Taiwan. In the application, the roughness of the river channel was assessed according to the actual field conditions. Instead of using the observed water levels in each rainfall event, the notch width of the rectangular contracted weir per unit area was evaluated by direct field measurements to calibrate the discharge coefficient. Test results from the selected field in six rainfall events showed that the local average value of the notch width of the rectangular contracted weir per unit area was 1·025 m/ha. Compared to the results of field measurements, the relative errors of the predictions were within 3% in all tests of rainfall events. In addition, for different types of catchment partitions, it was found that the corresponding weir discharge coefficients remained roughly unchanged. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

11.
This study simulates how spatial variations in particle‐size emissions from a playa affect bulk and size‐resolved dust concentration profiles during two contrasting wind erosion events (a small local and a large regional event) in the Channel Country, Lake Eyre Basin, Australia. The regional event had higher dust concentration as a result of stronger frontal winds and higher erodibility across the playa. For each event, two emission scenarios are simulated to determine if measured size‐resolved dust concentration profiles can be explained by spatial variability in source area emissions. The first scenario assumes that particle‐size emissions from source areas occur at a uniform rate, while the second scenario assumes that particle‐size emissions vary between and within source areas. The uniform emission scenario, reproduced measured bulk dust concentration profiles (R2 = 0·93 regional and R2 = 0·81 local), however simulated size‐resolved dust concentration profiles had poor statistical fits to measured size‐resolved profiles for each size class (the highest were R2 = 0·5 regional and R2 = 0·3 local). For the differential particle‐size emission scenario, the fit to the measured bulk dust concentration profiles is improved (R2 = 0·97 regional and R2 = 0·83 local). However, the fit to the size‐resolved profiles improved dramatically, with the lowest being R2 = 0·89 (regional) and R2 = 0·80 (local). Particle‐size emission models should therefore be tested against both bulk and size‐resolved dust concentration profiles, since if only bulk dust concentration profiles are used model performance may be over‐stated. As the source areas in the first 90 m upwind of the tower were similar for both events, the percentage contributions of each particle‐size class to total emissions can be compared. The contribution of each particle‐size class was similar even though the wind speed, turbulence and dust concentrations were significantly different; suggesting that the contribution of each particle‐size to the total emitted dusts is not related to wind speed and turbulence. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

12.
This paper addresses the effect of accurately mapping spatially heterogeneous drainage densities in high‐altitude alpine basins on Rescaled Width Functions (RWFs), used in some applications as a minimalist model of the hydrologic response. The channel network and 373 of its channel heads were mapped in the field in a high mountain catchment in the Swiss Alps. The mapped channel network is characterized by highly uneven drainage density, here described by the distribution of the length to the first channelized site computed along steepest descent from any unchannelled site. Various channel networks were extracted from a 1 m lidar‐derived digital terrain model and compared with the field‐mapped channel network using geomorphologic parameters, hillslope‐to‐channel distance and RWFs. Our results show that the channel network derived by statistical analysis of surface morphology is consistent with the field‐mapped network. Larger discrepancies were observed when the channel network was obtained with classical threshold‐based approaches relying on cumulative drainage area and local slope. The actual arrangement of the drainage densities has a significant impact on the RWFs. The discrepancy was largest between RWFs derived from classical extraction methods and RWFs derived with the field‐mapped network, indicating an inappropriate extraction of the channelled portion of the high‐altitude catchment that is a reflection of the variety of channel initiation processes. Our results suggest that spatial heterogeneity of the drainage density might play an important role in modelling streamflow generation. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

13.
Hydro‐geomorphological assessments are an essential component for riverine management plans. They usually require costly and time‐consuming field surveys to characterize the spatial variability of key variables such as flow depth, width, discharge, water surface slope, grain size and unit stream power throughout the river corridor. The objective of this research is to develop automated tools for hydro‐geomorphological assessments using high‐resolution LiDAR digital elevation models (DEMs). More specifically, this paper aims at developing geographic information system (GIS) tools to extract channel slope, width and discharge from 1 m‐resolution LiDAR DEMs to estimate the spatial distribution of unit stream power in two contrasted watersheds in Quebec: a small agricultural stream (Des Fèves River) and a large gravel‐bed river (Matane River). For slope, the centreline extracted from the raw LiDAR DEM was resampled at a coarser resolution using the minimum elevation value. The channel width extraction algorithm progressively increased the centerline from the raw DEM until thresholds of elevation differences and slopes were reached. Based on the comparison with over 4000 differential global positioning system (GPS) measurements of the water surface collected in a 50 km reach of the Matane River, the longitudinal profile and slope estimates extracted from the raw and resampled LiDAR DEMs were in very good agreement with the field measurements (correlation coefficients ranging from 0 · 83 to 0 · 87) and can thus be used to compute stream power. The extracted width also corresponded very well to the channel as seen from ortho‐photos, although the presence of bars in the Matane River increased the level of error in width estimates. The estimated maximum unit stream power spatial patterns corresponded well with field evidence of bank erosion, indicating that LiDAR DEMs can be used with confidence for initial hydro‐geomorphological assessments. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

14.
Short‐circuiting flow, commonly experienced in many constructed wetlands, reduces hydraulic retention times in unit wetland cells and decreases the treatment efficiency. A two‐dimensional (2‐D), physically based, distributed modelling approach was used to systematically address the effects of bathymetry and vegetation on short‐circuiting flow, which previously have been neglected or lumped in one‐dimensional wetland flow models. In this study, a 2‐D transient hydrodynamics with advection‐dispersion model was developed using MIKE 21 and calibrated with bromide tracer data collected at the Orlando Easterly Wetland Cell 7. The estimated topographic difference between short‐circuiting flow zone and adjacent area ranged from 0·3 to 0·8 m. A range of the Manning roughness coefficient at the short‐circuiting flow zone was estimated (0·022–0·045 s m?1/3). Sensitivity analysis of topographical and vegetative heterogeneity deduced during model calibration shows that relic ditches or other ditch‐shaped landforms and the associated sparse vegetation along the main flow direction intensify the short‐circuiting pattern, considerably affecting 2‐D solute transport simulation. In terms of hydraulic efficiency, this study indicates that the bathymetry effect on short‐circuiting flow is more important than the vegetation effect. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

15.
Despite widespread bench‐terracing, stream sediment yields from agricultural hillsides in upland West Java remain high. We studied the causes of this lack of effect by combining measurements at different spatial scales using an erosion process model. Event runoff and sediment yield from two 4‐ha terraced hillside subcatchments were measured and field surveys of land use, bench‐terrace geometry and storage of sediment in the drainage network were conducted for two consecutive years. Runoff was 3·0–3·9% of rainfall and sediment yield was 11–30 t ha−1 yr−1 for different years, subcatchments and calculation techniques. Sediment storage changes in the subcatchment drainage network were less than 2 t ha−1, whereas an additional 0·3–1·5 t ha−1 was stored in the gully between the subcatchment flumes and the main stream. This suggests mean annual sediment delivery ratios of 86–125%, or 80–104% if this additional storage is included. The Terrace Erosion and Sediment Transport (TEST) model developed and validated for the studied environment was parameterized using erosion plot studies, land use surveys and digital terrain analysis to simulate runoff and sediment generation on the terraced hillsides. This resulted in over‐estimates of runoff and under‐estimates of runoff sediment concentration. Relatively poor model performance was attributed to sample bias in the six erosion plots used for model calibration and unaccounted covariance between important terrain attributes such as slope, infiltration capacity, soil conservation works and vegetation cover. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

16.
Constructed wetlands are being utilized worldwide to effectively reduce excess nutrients in agricultural runoff and wastewater. Despite their frequency, a multi‐dimensional, physically based, spatially distributed modelling approach has rarely been applied for flow and solute transport in treatment wetlands. This article presents a two‐dimensional hydrodynamic and solute transport modelling of a large‐scaled, subtropical, free water surface constructed wetland of about 8 km2 in the Everglades of Florida, USA. In this study, MIKE 21 was adopted as the basic model framework. Field monitoring of the time series hydrological and chloride data, as well as spatially distributed data such as bathymetry and vegetation distribution, provided the necessary model input and testing data. Simulated water level profiles were in good agreement with the spatio‐temporal variations of measured ones. On average, the root‐mean‐square error of model calibration on annual water level fluctuations was 0·09 m. Manning's roughness coefficients for the dense emergent and submerged aquatic vegetation areas, which were estimated as a function of vegetation type, ranged from 0·67 to 1·0 and 0·12 to 0·15 s/m1/3, respectively. The solute transport model calibration for four monitoring sites agreed well with the measured annual variations in chloride concentration with an average percent model error of about 15%. The longitudinal dispersivity was estimated to be about 2 m and was more than an order of magnitude higher than the transverse one. This study is expected to play the role of a stepping stone for future modelling efforts on the development and application of more advanced flow and transport models applicable to a variety of constructed wetland systems, as well as to the Everglades stormwater treatment areas in operation or in preparation. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

17.
The hyporheic zone (HZ) has the capability to eliminate and attenuate nutrients and contaminants in riverine systems. Biogeochemical reactions and the potential elimination of contaminants are strongly controlled by the flow paths and dynamics in the HZ. Nevertheless, an easily applicable method for the field determination of flow patterns in the HZ is still lacking. Therefore, a heat pulse technique, which traces the movement of a short heat pulse in the upper part of the HZ and other sand beds, was developed. Five rods are vertically driven into the sediment of the streambed; one rod with a heater as point source located in about 10‐cm sediment depth and four rods with four temperature sensors in 3 cm distance, arranged concentrically with 7 cm diameter around the heating rod. Subsequently, a heat pulse is applied and the resulting breakthrough curves are indicative of flow velocities and flow directions in the streambed. A rough data analysis procedure is also suggested. In addition, laboratory experiments were performed to test the heat pulse technique. These experiments were validated based on coupled numerical modelling of flow and heat transport. First field tests of the method prove that the method is easily applicable under field conditions. These first field tests showed highly complex flow patterns with flow velocities from 1·8 to 4·9 cm min?1 and flow directions from parallel to surface flow to opposite to surface flow. This suggests the need for a robust method to quantify hyporheic flow patterns in situ. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

18.
The numerical model COUP 2D simulates the hydrological coupling between hillslopes and the river channel during a rainfall event. In order to test the numerical model, a 1:100 scaled laboratory flume which was modified to incorporate lateral hillslope elements, was used to run a series of experiments in which hillslope angle, channel angle, hillslope discharge and channel discharge were the varying parameters. Overall, there were 18 different experimental configurations with three replicates carried out for each condition, leading to a total of 54 experiments. These conditions were then used to parameterize and run COUP 2D. Internal model outputs of flow depth and flow velocity at four cross‐sections in the channel were compared to the measurements made in the physical model for the same parameter conditions. Statistical comparisons of the measured and modelled data were carried out for each experiment and across all experiments, using two goodness‐of‐fit measures—root mean square error and Nash–Sutcliffe coefficient of efficiency—in order to assess the performance of the model over an entire simulation as well as over all the simulations. The main effects on the goodness‐of‐fit measures for flow depth of each experimental variable, as well as the interactions between variables, were evaluated using statistical modelling. The results show that the model captures flow‐depth variations in response to changing channel and hillslope parameters. Statistical modelling suggests that the main effects on model error are cross‐section position, channel angle and channel discharge. Significant interactions also occur between all the channel variables and between the channel variables and hillslope discharge. The results of the testing procedure have significant implications for the consideration of different model components and for the interaction between data‐ and model evaluation. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

19.
Describing the spatial variability of heterogeneous snowpacks at a watershed or mountain‐front scale is important for improvements in large‐scale snowmelt modelling. Snowmelt depletion curves, which relate fractional decreases in snow‐covered area (SCA) against normalized decreases in snow water equivalent (SWE), are a common approach to scale‐up snowmelt models. Unfortunately, the kinds of ground‐based observations that are used to develop depletion curves are expensive to gather and impractical for large areas. We describe an approach incorporating remotely sensed fractional SCA (FSCA) data with coinciding daily snowmelt SWE outputs during ablation to quantify the shape of a depletion curve. We joined melt estimates from the Utah Energy Balance Snow Accumulation and Melt Model (UEB) with FSCA data calculated from a normalized difference snow index snow algorithm using NASA's moderate resolution imaging spectroradiometer (MODIS) visible (0·545–0·565 µm) and shortwave infrared (1·628–1·652 µm) reflectance data. We tested the approach at three 500 m2 study sites, one in central Idaho and the other two on the North Slope in the Alaskan arctic. The UEB‐MODIS‐derived depletion curves were evaluated against depletion curves derived from ground‐based snow surveys. Comparisons showed strong agreement between the independent estimates. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

20.
Field‐ and laboratory‐scale rainfall simulation experiments were carried out in an investigation of the temporal variability of erosion processes on interrill areas, and the effects of such variation upon sediment size characteristics. Poorly aggregated sandy soils from the semi‐arid environment of Senegal, West Africa, were used on both a 40 m2 field plot and a 0·25 m2 laboratory plot; rainfall intensity for all experiments was 70 mm h?1 with a duration of 1 to 2 hours. Time‐series measurements were made of the quantity and the size distribution of eroded material: these permitted an estimate of the changing temporal balance between the main erosion processes (splash and wash). Results from both spatial scales showed a similar temporal pattern of runoff generation and sediment concentration. For both spatial scales, the dominant erosional process was detachment by raindrops; this resulted in a dynamic evolution of the soil surface under raindrop impact, with the rapid formation of a sieving crust followed by an erosion crust. However, a clear difference was observed between the two scales regarding the size of particles detached by both splash and wash. While all measured values were lower than the mean weight diameter (MWD) value of the original soil (mean 0·32 mm), demonstrating the size‐selective nature of wash and splash processes, the MWD values of washed and splashed particles at the field scale ranged from 0·08 to 0·16 mm and from 0·12 to 0·30 mm respectively, whereas the MWD values of washed and splashed particles at the laboratory scale ranged from 0·13 to 0·29 mm and from 0·21 to 0·32 mm respectively. Thus only at the field scale were the soil particles detached by splash notably coarser than those transported by wash. This suggests a transport‐limited erosion process at the field scale. Differences were also observed between the dynamics of the soil loss by wash at the two scales, since results showed wider scatter in the field compared to the laboratory experiments. This scatter is probably related to the change in soil surface characteristics due to the size‐selectivity of the erosion processes at this spatial scale. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号