共查询到18条相似文献，搜索用时 296 毫秒
1.
多结构联系体系的高效阻尼控制及其仿真分析 总被引：3，自引：0，他引：3
本文提出了一种用于多结构体系的,具有位移放大功能的高效被动阻尼控制装置,分析了该装置的工作原理,建立了基于这种装置的多结构被阻尼控制体系的运动方程,并对该装置的控制效果进行了仿真计算和分析,结果表明,该控制装置能充分利用体系中各了结构之间的相互作用,可以取得十分明显的减震控制效果。 相似文献
2.
多结构混合控制体系研究 总被引：9，自引：0，他引：9
本文提出了多结构混合控制体系的概念及其相应的混合控制装置－常阻尼变刚度控制装置,阐明了其控制原理,建立了两结构混合控制体系的状态方程,其于瞬时最优控制的概念,提出了多结构混合控制体系的控制律,某两结构混合控制体系的仿真分析表明,多结构混合控制体系的概念是正确的,相应的混合控制装置是有效的。 相似文献
3.
两结构高效阻尼控制体系试验研究 总被引：2，自引：0，他引：2
本文通过模拟地震动振动台试验，研究了两个相邻结构模型的地震响应，结构模型采用一种高效阻尼装置(High Efficient Damper for Multi—Structure System即HEDMS)连接。非线性时程分析与振动台试验结果都证明了该阻尼装置能高效发挥软钢阻尼器的耗能能力，从而显著减轻两结构模型的地震响应。同时，研究还指出了进行阻尼装置设计时应该注意的一些问题。 相似文献
4.
5.
两个控制装置的模拟地震振动台试验研究 总被引：2，自引：1，他引：1
本文作者设计制造了一种高效被动阻尼控制（HEDC）装置和一种半主动控制装置－主动变刚度,阻尼（AVS．D）控制装置,并对其控制机理和控制效果进行了模拟地震振动台试验研究,试验结果表明,HEDC控制效果是令人满意的,而AVS．D控制则可以获得更好的效果,尽管它仅需很少的能量输入,试验结果表明,在AVS．D控制中,装置的电磁阀处于开启状态工作的时间较长,即在大部分时间里AVS．D控制系统是通过阻尼而不足刚度来控制受控结构,这在一定程度上降低了控制时滞的影响。 相似文献
6.
惯容器是一种新型的振动控制装置,该装置可以将螺杆的轴向运动转换为黏滞材料和旋转质量的高速旋转运动,使阻尼器的阻尼效应和质量效应得到放大。基于惯容器原理以及电涡流原理,提出一种新型的拉索式旋转电涡流阻尼器,为结构被动控制提供了新的设计思路。为研究这种新型惯容系统的减振机理,对安装拉索式旋转电涡流阻尼器单层框架的力学模型进行了探讨。推导出了配置惯容系统单质点体系的动力表达式,并基于此表达式探讨在频域内该惯容系统关键参数对单质点体系位移、速度和加速度响应的影响。结果表明:这种拉索式旋转电涡流阻尼器可以起到放大质量的效果,惯容系统可以有效地减少单质点体系的位移、速度和加速度响应幅值。 相似文献
7.
土木工程结构振动控制的研究进展 总被引：21，自引：2，他引：21
综述了近年来土木工程结构振动控制领域的研究进展和发展现状，指出了其发展前景和有待解决的问题，并介绍了主要变刚度阻尼控制系统的工作原理和组成。 相似文献
8.
液压粘弹性控制系统对建筑结构抗震控制的研究 总被引：3，自引：1，他引：3
本文详细介绍了作者提出的液压粘弹性控制系统（ＨｙｄｒａｕｌｉｃＶｉｓｃｏｅｌａｓｔｉｃＣｏｎｔｒｏｌＳｙｓｔｅｍ简称ＨＶＥＳ）的构成及工作原理，建立了分析模型，并对其控制效果以及各参数变化对控制作用的影响进行了探讨，最后号普通粘弹性阻尼器的控制效果进行了比较，研究结果表明，ＨＶＥＳ是一种高效的振动控制系统，与普通耗能减振装置相比，具有控制效果更好，且不破坏结构使用能等特点，因此具有广阔的应用前景。 相似文献
9.
10.
11.
相邻结构地震反应MR阻尼器控制的仿真分析 总被引：2，自引：0，他引：2
本文仿真分析了应用磁流变(MR)阻尼器对相邻结构地震反应的控制效果,为进一步开展模型试验研究奠定了基础。建立了地震激励下相邻结构MR阻尼器控制系统的运动方程,提出了描述MR阻尼器阻尼力滞回特性的改进S igmoid模型,分别对应用开关控制、半主动控制以及最小或最大电流被动控制的四种控制方法的相邻结构地震反应的控制效果进行了仿真分析。结果表明,在相邻结构间连接安装MR阻尼器可以有效地控制相邻结构的地震反应,且开关控制方法和半主动控制方法的控制效果均好于两种被动控制方法,体现了MR阻尼器阻尼力可调的优点;在四种控制方法中,半主动控制方法的控制效果最好,体现了MR阻尼器阻尼力具有连续调节能力的优点;若能解决MR阻尼器的剩磁问题,半主动控制方法的控制效果会得到进一步的提高。 相似文献
12.
本文通过Maxwell模型模拟的黏滞阻尼器连接的2种不同相邻结构的地震反应分析,对阻尼器设置的位置和阻尼参数进行了同时优化。在El Centro波、Tianjin波和Taft波3种较典型的地震动作用下,分别对不同质量比和不同刚度比的主、子结构在无阻尼和有阻尼情况下进行了地震反应分析,并以主结构的顶层最大相对位移最小作为优化目标,寻求出最优的阻尼器摆放位置以及对应的最优阻尼系数。结果显示,当阻尼器选择合适的安放位置和合理的阻尼参数时,主、子结构的地震反应都会有一定程度的降低,从而收到较好的减震效果。 相似文献
13.
The dynamic behaviour of two adjacent single‐degree‐of‐freedom (SDOF) structures connected with a viscous damper is studied under base acceleration. The base acceleration is modelled as harmonic excitation as well as stationary white‐noise random process. The governing equations of motion of the connected system are derived and solved for relative displacement and absolute acceleration responses of connected structures. The response of structures is found to be reduced by connecting with a viscous damper having appropriate damping. For undamped SDOF structures, the closed‐form expressions for optimum damping of viscous damper for minimum steady state as well as minimum mean square relative displacement and absolute acceleration of either of the connected SDOF structures are derived. The optimum damper damping is found to be functions of mass and frequency ratio of two connected structures. Further, numerical results had indicated that the damping of the connected structures does not have noticeable effects on the optimum damper damping and the corresponding optimized response. This implies that the derived closed‐form expressions for optimum damper damping of undamped structures can also be used in practical applications for damped structures. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
14.
Concept and performance testing of a high‐capacity oil damper comprising multiple damper units 
下载免费PDF全文
下载免费PDF全文 There has been a significant increase in the size of building structures in recent years. Huge structures such as high‐rise buildings and large‐domed stadiums require high‐performance structural control, including the use of high‐capacity dampers, especially in an earthquake‐prone country like Japan. The objective of the present study was the enhancement of both human and structural safety in such structures through the development of a rate‐dependent type of damper with a high damping capacity. Among the various available types of rate‐dependent dampers, the authors focused on the oil damper owing to its stable performance against long‐duration vibrations. The target maximum damping force was 6000 kN, which is higher than that of any existing oil damper utilized in building structures. The authors developed a novel concept for achieving this high capacity while maintaining the size of the damper within acceptable dimensions from an architectural point of view. The concept involves the use of multiple damper units that produce mechanically parallel damping forces spatially arranged in series. As a prototype, a 1500‐kN oil damper was fabricated by combining three 500‐kN dampers. The 1500‐kN prototype damper was conceived as a full‐scale prototype of a damper that is more slender than comparable commercially available dampers in Japan, and as a scaled model of the proposed 6000‐kN damper. Sinusoidal loading tests were conducted on the prototype damper using a frequency range of 0.1–1.5 Hz and a velocity range of 0.4–300 mm/s. The results confirmed that the damper produced the design damping forces. The results of earthquake loading tests also revealed that the damper exerted a stable damping force against a large earthquake and maintained its performance after the earthquake. The damper is particularly effective against earthquakes with long‐period components that could increase the temperature of a damper. This is afforded by its high heat capacity compared to conventional dampers. Considering that the proposed 6000‐kN damper will generate a damping force that is about 2–3 times that of the strongest conventional oil damper, existing manufacturer test machines would be inadequate for evaluating its full performance characteristics. To address this issue, the authors also propose a test method for evaluating the overall damping force. The method is premised on the fact that the characteristic feature of the proposed damper is its combination of multiple damper units. The overall performance is thus evaluated using the test results for the individual damper units while the other dampers are bypassed. This method was verified by the results of the abovementioned sinusoidal loading tests, with the error for the 1500‐kN prototype damper found to be less than 5%. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
15.
Kenneth K. Walsh Makola M. Abdullah 《地震工程与工程振动(英文版)》2006,5(2):223-233
Semi-active dampers are used in base-isolation to reduce the seismic response of civil engineering structures. In the present study, a new semi-active damping system using variable amplification will be investigated for adaptive baseisolation. It uses a novel variable amplification device （VAD） connected in series with a passive damper. The VAD is capable of producing multiple amplification factors, each corresponding to a different amplification state. Forces from the damper are amplified to the structure according to the current amplification state, which is selected via a semi-active control algorithm specifically tailored to the system＇s tmique damping characteristics. To demonstrate the effectiveness of the VAD-damper system for adaptive base-isolation, numerical simulations are conducted for three and seven-story base-isolated buildings subject to both far and near-field ground motions. The results indicate that the system can achieve significant reductions in response compared to the base-isolated buildings with no damper. The proposed system is also found to perform well compared to a typical semi-active damper. 相似文献
16.
磁流变液是一种性能优良的智能材料,用其制成的MR阻尼器是一种理想的半主动控制装置。本文提出了一种新型MR阻尼器——逆变型MR阻尼器,给出了逆变型MR阻尼器的设计方法,并设计了一个足尺的阀式逆变型MR阻尼器。实验证明逆变型MR阻尼器阻尼力可调,在电源失效或无电源时能够在大阻尼状态工作,这提高了半主动控制装置在地震中的使用安全性。逆变型MR阻尼器具有良好的可靠性、实用性和经济性。本文最后针对试验中阻尼器出力的可调范围比较小的问题给出了几种改进的思路。 相似文献
17.
考虑到多维地震输入对网架结构的不利影响,基于形状记忆合金超弹性,研制出一种兼具自复位、高耗能及放大功能于一体的形状记忆合金复合黏滞阻尼器(Hybrid Shape Memory Alloy Viscous Dampers,简称HSMAVD),并通过试验研究该阻尼器在循环荷载作用下的力学性能;然后以平面四角锥网架模型为基础,将该阻尼器替换部分网架结构杆件,并分析该阻尼器减震控制效果。结果表明形状记忆合金与黏滞阻尼器复合后具有良好的协同工作能力,可有效发挥形状记忆合金的超弹性和黏滞阻尼器的速度相关特性,使其具有稳定的滞回性能和良好的耗能能力;采用阻尼杆件替换原杆件的方法既能对结构进行有效的减震控制,又不改变原有的结构形式,是一种优越的减震控制方法,并为HSMAVD被动控制系统在结构抗震中的实际应用提供新思路。 相似文献
18.
城市桥梁粘滞阻尼器防地震碰撞分析与参数设计 总被引：2，自引：0，他引：2
研究了粘滞阻尼器防止城市梁桥地震碰撞反应的效果并提出了其参数设计方法。分析了线性粘滞阻尼器与非线性粘滞阻尼器阻尼系数的等效关系。运用随机振动理论与随机等效线性化理论建立了邻联间安装粘滞阻尼器后最大相对位移及墩顶最大位移的计算方法。以控制邻联最大相对位移小于实际间隙为目标,提出了防碰撞粘滞阻尼器参数设计方法。对1座4跨隔震连续梁桥进行了仿真分析,结果表明:粘滞阻尼器能有效抑制邻联的碰撞反应且不会显著增大桥墩的延性需求。在相同阻尼系数的情况下,粘滞阻尼器的速度指数越小,其防碰撞效果越好。利用人工波进行的时程分析结果验证了参数设计方法的可行性。 相似文献