共查询到20条相似文献，搜索用时 31 毫秒
1.
F. Martín-González L. Barbero R. Capote N. Heredia G. Gallastegui 《International Journal of Earth Sciences》2012,101(5):1331-1342
The lateral termination of the Alpine-Pyrenean Orogen relief onshore is located in the NW Iberian Peninsula. It overlies a Variscan basement (Iberian Massif), where the sedimentary record of the Alpine tectonic is very scarce. Thus, the characterisation of the tectonic evolution of the lateral termination is difficult and timing and geometries of the main tectonic structures remain unclear. Combining the tectonothermal histories obtained by modelling of the apatite fission-track data (AFT) with structural mapping allows for a comparative study of the different tectonic scenarios and deformation transfer in the lateral termination of an orogen. AFT ages for the studied area vary from 53.5?±?12.9 and 222?±?12?Ma (from Late Triassic to Early Eocene). The beginning of the Cenozoic cooling episodes is in agreement with the infilling of the Tertiary basins (Late Eocene or Oligocene). Calculated uplift for the Alpine Orogeny is around 2,400?m. The Cantabrian Mountains were uplifted and emplaced southwards and the main period of exhumation began in the Palaeogene at rates of ~0.02?mm/a and continued during the Neogene at rates of ~0.06?mm/a. However, the Galaico-Leoneses Mountains, located to the south of the studied area, were uplifted and emplaced northwards during the Neogene, showing more rapid uplift rates of ~0.08?mm/a, suggesting that the western termination of the Alpine-Pyrenean Orogen relief is the result of the successive interaction of two Alpine deformation fronts. 相似文献
2.
通过柴达木盆地西部茫崖-赛什腾山地表地质、航磁、重力、大地电磁测深和地震资料的综合分析,认为柴达木盆地夹持在昆北地块与赛什腾构造带之间,其中包括柴达木地块与祁连地块南缘2个一级构造单元和昆北地体北缘,柴达木盆地,赛什腾构造带和祁连地块南部的苏干湖盆地等4个二级构造单元。盆地的总体结构表现为东昆仑山和祁连山相向向盆地挤压对冲,盆地中部沉降的构造格局。盆地内部的构造样式以自盆地边缘至中心以此形成背斜构造为显著特征,背斜两翼多发育逆断层,构成“两断夹-隆”的构造格局。挤压应力主要来自南西方向、北东方向起阻挡作用。在两侧造山带的强烈挤压作用下,侏罗纪时期在祁连造山带南缘形成并不典型的前陆盆地,古近纪至新近纪时期则在祁连造山带与昆仑造山带之间形成双侧前陆盆地,第四纪属挤压坳陷盆地。 相似文献
3.
云南曲靖盆地构造演化及其对生物气成藏条件的控制 总被引：1，自引：0，他引：1
曲靖盆地是在云南省发现的具有工业价值生物气藏的第三系沉积盆地之一。利用二维地震测线结合地质和钻井等资料开展了详细的构造和沉积解释,对曲靖盆地的构造特征、盆地形成和演化进行了较为系统的综合研究,分析了构造演化对生物气成藏条件的控制作用。曲靖盆地的早—中渐新世的断陷阶段为大套湖相暗色泥岩(蔡家冲组)形成时期;渐新世晚期—上新世早期为盆地整体抬升萎缩阶段,避免了蔡家冲组有机质的大量消耗,保存了第四纪以来生物气成藏的有机物质;晚上新世的盆地坳陷阶段为茨营组含煤层系(次要气源岩)、储集层、盖层和岩性圈闭形成的主要时期;上新世末的压扭抬升萎缩阶段是断背斜和断鼻等构造圈闭和构造—岩性复合圈闭发育时期;第四纪盆地稳定沉降阶段为生物气聚集成藏时期。 相似文献
4.
中国西天山南缘盆山构造转换解析 总被引：15，自引：4，他引：11
在西天山南缘,天山造山带向塔里木盆地北缘的盆山过渡,是以前陆褶皱冲断构造形式向库车一拜城前陆盆地渐变,表现为一系列褶皱冲断组合的构造样式。根据独库公路南段构造变形分析,可组合成６个部分：库尔干一铁力买提达坂根带褶皱系、南天山南缘逆冲断裂带、前陆逆冲推覆构造带、前陆双冲褶皱构造带、前陆隐伏逆冲前缘构造带、沙雅一轮台前缘叠加变形构造带。前陆盆地的发展可以划分为晚二叠一早三叠世、中三叠世一侏罗纪、白垩一 相似文献
5.
中祁连木里盆地古近系ESR年龄及地质意义 总被引：1，自引：1，他引：0
对中祁连木里盆地新生代红层进行ESR测年,获得了祁连山地区新生代红层沉积时代及构造变形年代学数据.研究表明,中祁连木里盆地内沉积了巨厚的新生代红层,较好地记录了祁连山隆升历史.盆地最老的新生代地层为始新世由湖相沉积组成的火烧沟组,ESR年龄为40.2～35.3 Ma,与上覆沉积时代为32.6～24.3 Ma的渐新世河湖相沉积组成的白杨河组呈角度不整合接触.构造变形特征与沉积环境的变化说明始新世末与渐新世初木里地区发生了构造变形和山脉的隆升,与祁连山地区新生代早期的隆升有很好的对应关系. 相似文献
6.
《International Geology Review》2012,54(14):1806-1824
In this article, we present in situ U–Pb and Lu–Hf isotope data for Upper Triassic detritus in the Sichuan region of northwestern South China, which was a foreland basin during the Late Triassic. The aim is to determine the provenance of sediments in the foreland basin and to constrain the evolution of the surrounding mountain belts. U–Pb age data for the Late Triassic detrital zircons generally show populations at 2.4–2.6 Ga, 1.7–1.9 Ga, 710–860 Ma, 410–460 Ma, and 210–300 Ma. By fitting the zircon data into the tectonic, sedimentologic, and palaeographic framework, we propose that the north Yangtze Block and South Qinling–Dabie Orogen were the important source areas of sediments in the northern part of the foreland basin, whereas the Longmen Shan thrust-fold belt was the main source region for detritus in other parts of the foreland basin. The South Qinling–Dabie Orogen could also have served as a physical barrier to block most detritus shed from the southern North China Block into the foreland basin during the sedimentation of the Xujiahe Formation. Our results also reveal that part of the flysch from the eastern margin of the Songpan–Ganzi region had been displaced into the Longmen Shan thrust-fold belt before the deposition of the foreland basin sediments. In addition, the Lu-Hf data indicate that Phanerozoic igneous rocks in central China show insignificant formation of the juvenile crust. 相似文献
7.
《Journal of Asian Earth Sciences》2011,40(6):740-759
Cenozoic sedimentary deposits in central-southern Ningxia province, NW China are an important record of Tertiary tectonic events along the evolving Qinghai–Tibetan Plateau’s northeast margin. Shortly after the onset of the Indo-Eurasia collision to the south, a thrust belt and adjoining foreland basin began to form during 40–30 Ma. The Eocene Sikouzi Formation developed in a distal setting to this basin, in normal fault-bound basins that may have formed in a forebulge setting. Subsequent deposition of the Oligocene Qingshuiying Formation occurred during a phase of apparently less intense tectonism and the previous underfilled foreland basin became overfilled. During the Early Miocene, contractional deformation was mainly distributed to the west of the Liupan Shan. This resulted in deformation of the Qingshuiying Formation as indicated by an unconformity with the overlying Miocene Hongliugou Formation. The unconformity occurs proximal to the Haiyuan Fault suggesting that the Haiyuan Fault may have begun movement in the Early Miocene. In the Late Miocene, thrusting occurred west of the southern Helan Shan and an unconformity developed between the Hongliugou and Qingshuiying Formations proximal to the the Cha-Gu Fault. Relationships between the Miocene stratigraphy and major faults in the region imply that during the Late Miocene the deformation front of the Qinghai–Tibetan Plateau had migrated to the Cha-Gu Fault along the western Ordos Margin, and the Xiang Shan was uplifted. Central-southern Ningxia was then incorporated into the northeast propagating thrust wedge. The driving force for NE propagation of the thrust wedge was most likely pronounced uplift of the northeastern plateau at the same time. Analysis of the sedimentary record coupled with consideration of the topographic evolution of the region suggests that the evolving fold-and-thrust belt experienced both forward-breaking fold-and-thrust belt development, and out-of-sequence fault displacements as the thrust wedge evolved and the foreland basin became compartmentalised. The documented sedimentary facies and structural relationship also place constraints on the Miocene-Recent evolution of the Yellow River and its tributaries. 相似文献
8.
《International Geology Review》2012,54(3):367-381
The Asturian Arc was produced in the Early Permian by a large E–W dextral strike–slip fault (North Iberian Megashear) which affected the Cantabrian and Palentian zones of the northeastern Iberian Massif. These two zones had previously been juxtaposed by an earlier Kasimovian NW–SE sinistral strike–slip fault (Covadonga Fault). The occurrence of multiple successive vertical fault sets in this area favoured its rotation around a vertical axis (mille-feuille effect). Along with other parallel faults, the Covadonga Fault became the western margin of a proto-Tethys marine basin, which was filled with turbidities and shallow coal-basin successions of Kasimovian and Gzhelian ages. The Covadonga Fault also displaced the West Asturian Leonese Zone to the northwest, dragging along part of the Cantabrian Zone (the Picos de Europa Unit) and emplacing a largely pelitic succession (Palentian Zone) in what would become the Asturian Arc core. The Picos de Europa Unit was later thrust over the Palentian Zone during clockwise rotation. In late Gzhelian time, two large E–W dextral strike–slip faults developed along the North Iberian Margin (North Iberian Megashear) and south of the Pyrenean Axial Zone (South Pyrenean Fault). The block south of the North Iberian Megashear and the South Pyrenean Fault was bent into a concave, E-facing shape prior to the Late Permian until both arms of the formerly NW–SE-trending Palaeozoic orogen became oriented E–W (in present-day coordinates). Arc rotation caused detachment in the upper crust of the Cantabrian Zone, and the basement Covadonga Fault was later resurrected along the original fault line as a clonic fault (the Ventaniella Fault) after the Arc was completed. Various oblique extensional NW–SE lineaments opened along the North Iberian Megashear due to dextral fault activity, during which numerous granitic bodies intruded and were later bent during arc formation. Palaeomagnetic data indicate that remagnetization episodes might be associated with thermal fluid circulation during faulting. Finally, it is concluded that the two types of late Palaeozoic–Early Permian orogenic evolution existed in the northeastern tip of the Iberian Massif: the first was a shear-and-thrust-dominated tectonic episode from the Late Devonian to the late Moscovian (Variscan Orogeny); it was followed by a fault-dominated, rotational tectonic episode from the early Kasimovian to the Middle Permian (Alleghenian Orogeny). The Alleghenian deformation was active throughout a broad E–W-directed shear zone between the North Iberian Megashear and the South Pyrenean Fault, which created the basement of the Pyrenean and Alpine belts. The southern European area may then be considered as having been built by dispersal of blocks previously separated by NW–SE sinistral megashears and faults of early Stephanian (Kasimovian) age, later cut by E–W Early Permian megashears, faults, and associated pull-apart basins. 相似文献
9.
米仓山南缘位于四川盆地北部地区,前人认为该地区晚三叠世-白垩纪受控于米仓山造山作用形成的前陆盆地.实际上,无论是按照经典的前陆盆地概念,还是陆内前陆盆地或陆内俯冲前陆盆地等术语,米仓山南缘中生代为前陆盆地值得商榷,其一些关键的地质问题必须给以重视.主要表现在:①平面构造图显示,米仓山地区,前震旦系基底与震旦系盖层之间构成一规模较大的不完整的背斜穹隆,盖层围绕基底分布,说明不是构造推覆体;②不存在形成前陆盆地的区域应力,即该区在晚三叠世开始主要是升隆作用而非强烈的推覆挤压,研究资料表明该地区大规模的逆冲推覆作用发生在燕山期,米仓山的形成也应在该时限之内,之前米仓山为一继承性的隆起;③不具备前陆盆地的沉积格局,即晚三叠世-侏罗纪的沉积格局不是呈楔形展布.鉴于此,笔者认为前陆盆地术语不适用于米仓山南缘晚三叠世-侏罗纪沉积盆地的类型. 相似文献
10.
循化-化隆盆地新生代沉积及盆地基底和周缘山系磷灰石裂变径迹年代学分析揭示了青藏高原东北缘晚白垩世以来经历过3期隆升剥露事件: (1)盆地基底及拉脊山和西秦岭北缘构造带磷灰石裂变径迹年龄分析普遍记录了晚白垩世-始新世中期相对快速的区域性的隆升剥露事件, 西秦岭北缘快速抬升的起始时间为84Ma, 受控于向北的逆冲抬升; 向北到循化-化隆盆地中部的拉目峡抬升的起始时间为69Ma; 更北的拉脊山一带快速抬升期主要为40~50Ma, 从而反映晚白垩世-始新世中期的快速抬升由南向北逐渐扩展.这一期构造隆升事件导致循化-化隆盆地和临夏盆地缺失了北部西宁-民和盆地古近纪所具有的西宁群沉积.隆升剥露结束于31Ma左右, 此时化隆-循化盆地向东与同时期的临夏盆地相连为一个统一的大型西秦岭山前盆地, 两者具有相同的构造、沉积演化史, 因此循化-化隆盆地他拉组底部地层年龄最老不会超过临夏盆地最老地层的古地磁年龄, 即29Ma.(2)渐新世晚期约26Ma拉脊山开始双向逆冲隆升, 并可能延续到中新世早期约21Ma, 隆升作用使循化-化隆盆地成为挟持于拉脊山逆冲带和西秦岭构造带之间的山前挤压型前陆盆地, 循化-化隆盆地开始大规模沉积巨厚的他拉组冲积扇相粗碎屑岩.(3)通过循化-化隆盆地咸水河组和临夏组的沉积相分析、古流方向和砾石成分分析, 揭示出拉脊山构造带在中新世8Ma左右发生的最大规模的双向逆冲隆升事件, 这次事件直接导致循化-化隆盆地由前陆挤压盆地转变为山间盆地, 形成现今青藏高原东北缘的盆山地貌基本格局. 相似文献
11.
沉积物粒度分析在阿尔金山隆升研究中的应用 总被引：7，自引：5，他引：7
山体隆升必然制约两侧盆地的沉积,这种约束体现在盆地的沉积响应上.柴达木盆地西北缘的阿尔金山,位于青藏高原的西北边界,自第三纪以来发生了多次隆升事件,其中以早更新世末的一次最为强烈.本次研究在阿尔金山山前红三旱一号剖面干柴沟组自下而上不同层位选取典型的沉积岩样品,进行了系统的薄片矿物鉴定和粒度分析,发现沉积区柴达木盆地的沉积环境和气候条件因受阿尔金山多期次隆升的影响而发生变化,其各方面的沉积特点受到物源区的控制.研究表明,始新世时(下干柴沟组)物源区阿尔金山相对于柴达木盆地没有发生明显的快速隆升,到渐新世(上干柴沟组)阿尔金山相对于柴达木盆地开始发生强烈的快速隆升,沉积区气候变得明显干旱.中新世到上新世(下、上油砂山和狮子沟组)红三旱地区整体处于抬升阶段,可能阿尔金山相对于沉积盆地区不具有明显的地形高差,到早更新世(七个泉组)阿尔金山开始发生急剧隆升,相对于柴达木盆地沉积区在地形上出现巨大的相对高差,这一隆升事件目前仍在持续.该研究也为青藏高原的多次隆升和气候环境变化提供了佐证. 相似文献
12.
The Monte Orfano Conglomerate revisited: stratigraphic constraints on Cenozoic tectonic uplift of the Southern Alps (Lombardy, northern Italy) 总被引：1，自引：0，他引：1
Dario Sciunnach Giancarlo Scardia Fabrizio Tremolada Isabella Premoli Silva 《International Journal of Earth Sciences》2010,99(6):1335-1355
The Monte Orfano Conglomerate (MOC), exposed in the foothills of the Southern Alps (northern Italy), is one of the few outcrops
of sediments documenting the Cenozoic tectonic evolution of the Alpine retrowedge. Calcareous nannofossil biostratigraphy
allowed us to constrain the upper part of the MOC, formerly attributed to the Early-Middle Miocene in the type-locality, to
the earliest Miocene (Neogene part of the NN1 nannofossil zone). A likely latest Oligocene age is therefore suggested for
the bulk of the underlying conglomerates, whose base is not exposed. Deposition of the MOC can be placed within the post-collisional
tectonic uplift of the Alps, documented in the Lake Como area by the Como Conglomerate (CC) at the base of the Gonfolite Lombarda
Group, and supports the correlation with Upper Oligocene clastic sediments cropping out further to the East, in the Lake Garda
and in the Veneto-Friuli areas (“molassa”). The remarkable difference in petrographic composition between the western (CC) and eastern (MOC) clastics deposited in
the Alpine retro-foreland basin highlights the synchronous tectonic activity of two structural domains involving different
crustal levels. Whilst the bulk of the CC, that straddles the Oligocene/Miocene boundary, records largely the tectonic exhumation
of the Alpine axial chain crystalline complexes, the coeval MOC consists of detritus derived from the superficial crustal
section (Triassic to Paleogene sedimentary rocks) of the Alpine retrowedge and constrains the onset of the post-collisional
deformation phase of the Southern Alps as not younger than the Late Oligocene. 相似文献
13.
巴布亚湾受澳大利亚板块与太平洋板块高速斜向汇聚的控制,经历了复杂的中、新生代构造演化.前人对巴布亚湾盆地结构构造特征的研究多是局部的、分散的,关于盆地的形成时间和动力学机制仍存在争议.利用覆盖全盆的钻井约束的高精度2D、3D地震资料,精细地刻画了盆地的结构和构造特征,揭示了巴布亚湾发育潘多拉和奥雷两期叠置的前陆盆地.潘多拉前陆盆地是形成于渐新世不整合面之上的晚渐新世-中中新世微型前陆盆地,走向为NNE.奥雷前陆盆地是发育在复杂的裂谷边缘之上的早中新世-现今的周缘前陆盆地,沿着弧形的巴布亚半岛延伸480 km;盆地走向在148°E发生转变,由西部的NW向转为东部的近EW向.潘多拉微前陆盆地被奥雷前陆盆地向南逐渐超覆的沉积地层覆盖,两个前陆盆地走向相互垂直,垂向上形成叠置结构.阐明了巴布亚湾新生代经历三期挤压事件及两期叠置的前陆盆地的形成演化,解决了盆地结构及区域构造演化认识的不足,理清了复杂陆缘环境从伸展到挤压多期构造事件的时序及动力学机制,为澳大利亚板块北缘的板块构造重建提供了盆内证据. 相似文献
14.
We constructed a geological map, a 3D model and cross-sections, carried out a structural analysis, determined the stress fields and tectonic transport vectors, restored a cross section and performed a subsidence analysis to unravel the kinematic evolution of the NE emerged portion of the Asturian Basin (NW Iberian Peninsula), where Jurassic rocks crop out. The major folds run NW-SE, normal faults exhibit three dominant orientations: NW-SE, NE-SW and E-W, and thrusts display E-W strikes. After Upper Triassic-Lower Jurassic thermal subsidence, Middle Jurassic doming occurred, accompanied by normal faulting, high heat flow and basin uplift, followed by Upper Jurassic high-rate basin subsidence. Another extensional event, possibly during Late Jurassic-Early Cretaceous, caused an increment in the normal faults displacement. A contractional event, probably of Cenozoic age, led to selective and irregularly distributed buttressing and fault reactivation as reverse or strike-slip faults, and folding and/or offset of some previous faults by new generation folds and thrusts. The Middle Jurassic event could be a precursor of the Bay of Biscay and North Atlantic opening that occurred from Late Jurassic to Early Cretaceous, whereas the Cenozoic event would be responsible for the Pyrenean and Cantabrian ranges and the partial closure of the Bay of Biscay. 相似文献
15.
以鲁西淄博、临朐、平邑、蒙阴盆地为重点研究区,通过盆地中生界砂岩中碎屑石榴石的成分分析,探讨鲁西隆起及周边地区中生代构造演化历史。研究表明,鲁西盆地砂岩中石榴石成分在早中侏罗世和中晚侏罗世期间出现变化,暗示着物源的转变,早中侏罗世时期主要物源是鲁西隆起,中晚侏罗世时期转变为胶东地区和鲁西隆起。侏罗纪时期石榴石的物源转变显示,苏鲁苏鲁造山带可能在中晚侏罗世时期已经抬升至地表。白垩纪鲁西盆地物源主要为胶东地区,鲁西隆起的物源贡献较小,但是青山组中段和王氏组中段物源略有波动。白垩纪鲁西盆地石榴石物源显示,控制鲁西盆地沉积的主要是苏鲁造山带,古地理格架显示东高西低的特征,盆地物源的波动暗示鲁西隆起可能在早白垩世中晚期和晚白垩世中期经历过抬升。 相似文献
16.
Economic concentrations of detrital gold are rare in young foreland basins due to paucity of significant gold sources, and a paucity of sediment recycling processes during filling of the foreland basin. Gold shed into the foreland basins is typically widely dispersed in an overwhelming volume of immature basin-fill detritus of no economic significance. In the actively forming Canterbury Basin of New Zealand, minor gold concentration occurs at the mountain front in the bed of the Rakaia River, and 60 km downstream on beaches and the crest of foredunes at the river mouth. The Cretaceous–Tertiary Denver and Western Canada Basins in North America also have minor gold concentrations at the mountain front, and minor gold dispersal into the basin. Tectonic quiescence in the middle Tertiary in the Denver Basin kept gold within 20 km of the mountain front, where renewed uplift in late Tertiary caused minor economic concentrations to form in modern streams. Gold has been transported ca. 200 km across the Western Canada basin by progressive recycling of gravel during slow (ca. 10 to 50 m/Ma) middle Tertiary–Recent regional uplift and tilting, but little concentration has occurred. Development of significant placers in a foreland basin, the generally accepted setting for the Witwatersrand Au-U palaeoplacers, appears to require specific tectonic conditions during and/or after basin evolution to drive the sedimentary recycling necessary for significant placer development. Such tectonic conditions have not occurred in an any of the three young foreland basins examined in this study. 相似文献
17.
Alpine polyphase tectono-metamorphic evolution of the South Carpathians: A new overview 总被引：2，自引：0，他引：2
Viorica Iancu Tudor Berza Antoneta Seghedi Ion Gheuca Horst-Peter Hann 《Tectonophysics》2005,410(1-4):337-365
The main terrains involved in the Cretaceous–Tertiary tectonism in the South Carpathians segment of the European Alpine orogen are the Getic–Supragetic and Danubian continental crust fragments separated by the Severin oceanic crust-floored basin. During the Early–Middle Cretaceous times the Danubian microplate acted initially as a foreland unit strongly involved in the South Carpathians nappe stacking. Multistage folding/thrusting events, uplift/erosion and extensional stages and the development of associated sedimentary basins characterize the South Carpathians during Cretaceous to Tertiary convergence and collision events. The main Cretaceous tectogenetic events responsible for contraction and crustal thickening processes in the South Carpathians are Mid-Cretaceous (“Austrian phase”) and Latest Cretaceous (“Laramide” or “Getic phase”) in age. The architecture of the South Carpathians suggests polyphase tectonic evolution and mountain building and includes from top to bottom: the Getic–Supragetic basement/cover nappes, the Severin and Arjana cover nappes, and Danubian basement/cover nappes, all tectonically overriding the Moesian Platform. The Severin nappe complex (including Obarsia and Severin nappes) with Late Jurassic–Early Cretaceous ophiolites and turbidites is squeezed between the Danubian and Getic–Supragetic basement nappes as a result of successive thrusting of dismembered units during the inferred Mid- to Late Cretaceous subduction/collision followed by tectonic inversion processes.
Early Cretaceous thick-skinned tectonics was replaced by thin-skinned tectonics in Late Cretaceous. Thus, the former Middle Cretaceous “Austrian” nappe stack and its Albian–Lower Senonian cover got incorporated in the intra-Senonian “Laramide/Getic” stacking of the Getic–Supragetic/Severin/Arjana nappes onto the Danubian nappe duplex. The two contraction events are separated by an extensional tectonic phase in the upper plate recorded by the intrusion of the “Banatitic” magmas (84–73 Ma). The overthrusting of the entire South Carpathian Cretaceous nappe stack onto the fold/thrust foredeep units and to the Moesian Platform took place in the Late Miocene (intra-Sarmatian) times and was followed by extensional events and sedimentary basin formation. 相似文献
18.
西宁和贵德盆地新生代沉积物重矿物变化对构造活动的响应 总被引：1，自引：0，他引：1
位于青藏高原东北缘的西宁、贵德盆地的新生代沉积序列较完整的记录了盆地周围物源区构造变形过程。重矿物是碎屑物质的重要组成部分,是最直观、有效揭示源区母岩、构造-沉积过程的重要手段。通过重矿物的系统分析,结合沉积-构造变形,揭示出始新世-上新世末西宁-贵得盆地及其源区经历了几个构造活动阶段:古新世-始新世早期的隆升阶段、始新世中期-渐新世晚期的构造稳定阶段、渐新世末-中新世初的构造隆升阶段、中中新世构造稳定阶段和晚中新世以来的强烈隆升阶段。并结合特征矿物（绿泥石）及古水流分析,推断古近纪西宁-贵德盆地是东昆仑山前一个统一盆地。中新世早期青藏高原的扩张导致了拉脊山开始隆起,使原型盆地解体;约8.5 Ma以来拉脊山强烈隆升,两侧盆地逐渐转变为山间盆地。这为正确理解青藏高原东北缘盆山格局的形成和演化提供了重要依据。 相似文献
19.
扬子北缘晚造山阶段(即晚侏罗世—晚白垩世)发育以弧形构造为特征的前陆薄皮逆冲—褶皱构造,包括了沿秦岭—大别造山带发育的北西向的大洪山和大巴山弧形带,以及沿江南—雪峰造山带发育的北东向的川东—湘鄂西弧形带。详细的构造解析、盆地沉积及物源特征综合分析表明,弧形构造不仅将早期的前陆序列卷入变形,并且控制了晚侏罗世—晚白垩世的盆地演化和古地理格局。总结扬子北缘晚造山阶段的盆山演化特征,可以将其划分为3个阶段:(1)晚侏罗世—早白垩世早期,大洪山和大巴山弧形带的发育控制了四川盆地东北部及秭归盆地上侏罗统蓬莱镇组的沉积,川东—湘鄂西弧形带限制了盆地的东南边界,加之位于四川盆地西部的龙门山逆冲带,三面围限构成具前渊沉降的克拉通内盆地或称为“墙围盆地”(walled sedimentary basin);(2)早白垩世中期—早白垩世晚期,大洪山和大巴山弧形带的逆冲构造变形逐渐减弱,而川东—湘鄂西弧形带继续向北西扩展,构造线呈北东向展布,在弧形带前缘的宜昌地区形成沉积中心,并覆盖了现今的黄陵背斜;(3)晚白垩世,川东—湘鄂西弧形带继续向北西推进,构造线呈北北东向展布,弧形带北翼的黄陵背斜初始隆起,沉积中心分别位于北翼宜昌地区及南翼习水地区。与此同时,在弧形带内部薄皮构造的向斜部位形成楔顶沉积,发育如恩施盆地、黔江盆地、来凤盆地等一系列规模较小的背驼式盆地。 相似文献
20.
川西前陆盆地中—新生代各构造层的残余厚度展布和沉积特征分析发现,四川克拉通周缘的前陆盆地在晚三叠世时期发育于龙门山山前,明显属于龙门山褶皱逆冲构造载荷所形成的前渊凹陷;侏罗纪早期的沉积地层呈面状分布,没有表现出显著的挠曲沉降,指示了一个构造相对平静的阶段;中侏罗世早期前渊凹陷迁移至龙门山北段和米仓山山前,前渊沉积从晚三叠世的北东向转换为近东西向,广泛的湖泊相沉积预示了前陆盆地的欠充填状态;中侏罗世中晚期,川西盆地沉降中心又迁移到大巴山山前,相应的挠曲变形又从近东西向转化为北西向,构成了大巴山的前渊凹陷;晚侏罗世—早白垩世时期,沉降中心再次回到米仓山山前,巨厚的前渊凹陷沉积指示了米仓山冲断带的主要活动时期;白垩纪末—古近纪的前渊凹陷则跃迁至雅安—名山地区。川西前陆盆地的同造山沉降中心以四川盆地中心为核心在西部和北部呈弧形迁移,沉积序列不断更替和叠加。中生界各构造层底界构造图显示现今的构造低部位位于川西北地区和川西南地区,在川西北地区均有东西走向的等值线分布,而川西南地区等值线走向则为北东-南西向。因此分析认为,晚侏罗世至早白垩世的构造变形可能控制了川西盆地现今的地层变形,形成了川西北地区的南北向构造挤压结构,而晚期的新生代构造变形则主要体现在川西盆地的西南部,形成北东-南西向的地层展布特征。 相似文献