共查询到20条相似文献，搜索用时 31 毫秒
1.
超深储层地层起裂压力较高,水力压裂受现场泵注设备的限制严重,文中重点研究了大尺度水力压裂物模实验水泥样品尺寸（762 mm×762 mm×914 mm）在循环和常规两种泵注条件下的起裂扩展和声发射规律。实验结果显示,（1）相对于普通泵注,采用循环泵注方式进行水力压裂可以有效降低起裂压力,类似于单轴和三轴循环加载岩石力学行为,都是由于循环加载引起疲劳损伤;（2）对于螺旋射孔完井方式,水力压裂裂缝只从最薄弱射孔处起裂,一旦起裂后其他射孔孔眼很难再开启,水力压裂现场应合理选择分段距离和簇间距,实现储层改造效率最优化;（3）循环泵注水力压裂存在Kaiser效应（当加载应力到前次加载最高应力值时出现的声发射信息）。因孔隙流体扩散到岩石并导致孔隙压力的局部上升,破坏模式仍然可以由摩尔圆表示。研究成果对循环泵注条件的裂缝扩展规律研究以及发展新型压裂改造技术具有重要意义。 相似文献
2.
针对高角度天然裂缝发育地层中的水平井水力压裂问题,开展了水力裂缝自天然裂缝处起裂扩展的理论和试验研究。尝试将天然裂缝简化为与井筒轴线垂直的横向裂缝,基于线弹性断裂力学理论和最大拉应力准则,给出了水力裂缝起裂压力和扩展过程中应力强度因子的计算方法。利用预制横缝模拟高角度天然裂缝,开展了室内水力压裂试验,对水力裂缝的扩展形态和起裂压力进行了研究。理论计算表明,（1）水力裂缝自预制横缝端部起裂后,扩展距离超过1倍的预制横缝端部半径时可将预制横缝和水力裂缝合并起来,整体视作一条横向裂缝来计算应力强度因子;（2）水力裂缝尖端距井壁处的距离大于4倍的井筒半径时,应力强度因子的计算可忽略井筒的影响,近似采用硬币形裂缝的计算公式。试验研究发现,（1）水力裂缝在预制横缝端部起裂并扩展,形成与井筒轴线垂直的横向裂缝,裂缝的扩展呈现出Ⅰ型断裂的特点,形态近似呈圆形,未发现与井筒轴线平行的纵向裂缝的起裂和扩展;（2）排量对破裂净压力和起裂净压力有重要影响,大排量会导致较高的破裂净压力和起裂净压力,在大、小两种排量下起裂净压力的离散性均较小,计算得到的KⅠ临界断裂值的离散性也较小。研究结果可为改善裂缝发育储层的近井裂缝形态提供指导,也可为煤矿开采中预制横向切槽的水力压裂设计提供参考。 相似文献
3.
The geometry of hydraulic fracture propagation in the absence and presence of natural fractures in reservoirs was studied. The results revealed a marked influence of natural fractures on the symmetry of fracture propagation observed for rock free of natural fractures. Natural fracture properties such as stiffness and approaching angle, and the distance from wellbore to the natural fracture were found to influence the hydraulic fracture geometry. Furthermore, the location of the wellbore with respect to the natural fractures in a reservoir having a system of natural fractures displayed a significant influence on the resulting geometry of hydraulic fracture propagation. 相似文献
4.
储层非均质性对水力压裂的影响 总被引：1，自引：0，他引：1
从岩石细观非均质性的特点出发,采用RFPA2D-Flow软件对单孔和双孔数值模型进行压裂计算,研究岩石非均质性对水力压裂的响应,重点探讨双孔模型孔间吸引效应对裂纹演化形态的影响。岩石细观单元的力学、水力学特性由统计分布生成以体现岩石的随机不均质性,水力压裂过程中流体压力传递通过单元渗流-损伤耦合迭代来实现。数值计算结果表明:(1)岩石非均质性影响裂缝的扩展形态,导致水力裂纹尖端微裂纹的分支。随着均质度的增加,水力裂纹的扩展形态变得更加平直光滑,单孔模型两侧裂纹更加对称,双孔间裂纹的连通性变差。(2)岩石的非均匀性对于岩石的起裂压力和地层破裂压力影响较大。随着均质度的增大,起裂应力和地层破裂应力增大,并且两者间的差值逐渐变小,在储层为均质的条件下,两者几乎相等。(3)相同的边界条件下,均质模型的应力分布曲线光滑连续,非均质模型的应力分布曲线呈现出明显波动,井眼对称剖面上的应力分布不尽相同,反映了细观单元强度非均匀性及裂缝扩展形态对应力分布的影响。(4)双孔模型孔间存在孔隙水压力增加带,孔间产生吸引效应,双孔方位影响临界压力。研究结果对水压裂试验设计和现场压裂施工具有一定的参考意义。 相似文献
5.
干热岩水压致裂过程中低温诱导热应力与注入水压共同影响裂缝的萌生与扩展。首先通过THM耦合分析了低温压裂液注入过程中注入水压与热应力的相互作用及其对裂缝萌生的影响,随后建立描述岩石细观结构的THMD耦合模型对热应力影响下高温岩石水压致裂过程进行初探。结果表明：低温压裂液注入高温岩石产生的热应力包括岩石自身温度梯度形成的热应力与岩石颗粒非均匀膨胀导致的热应力,并在井筒周围呈现为拉应力。高注入压力将抑制热应力导致的多裂缝萌生,井筒附近热应力的存在对注入压力也具有削弱作用。基岩温度升高,裂缝萌生阶段更多裂缝在井筒附近起裂,缝网沿最大地应力方向的扩展速度减慢,但改造规模增加,同时多裂缝的存在也使得裂缝延伸压力增加。 相似文献
6.
Influence of Heterogeneity of Mechanical Properties on Hydraulic Fracturing in Permeable Rocks 总被引：11，自引：4，他引：7
T. H. Yang L. G. Tham C. A. Tang Z. Z. Liang Y. Tsui 《Rock Mechanics and Rock Engineering》2004,37(4):251-275
Summary Numerical simulations of circular holes under internal hydraulic pressure are carried out to investigate the hydraulic fracture initiation, propagation and breakdown behavior in rocks. The hydraulic pressure increases at a constant rate. The heterogeneity of the rocks is taken into account in the study by varying the homogeneity index. In addition, the permeability is varied with the states of stress and fracture. The simulations are conducted by using a finite element code, F-RFPA2D, which couples the flow, stress and damage analyses. The simulation results suggest that the fracture initiation and propagation, the roughness of the fracture path and the breakdown pressure are influenced considerably by the heterogeneity of rocks. The hole diameter elongation and the stress field evolution around the fracture tip during the fracture propagation can also provide useful information for the interpretation of the hydraulic fracturing behaviour. 相似文献
7.
Experimental investigation of fracture propagation and inrush characteristics in tunnel construction
It is well known that water inrush during excavation is one of the greatest challenges in modern underground engineering. However, the fracture propagation and inrush characteristics induced by excavation and high-pressure water are poorly understood due to the lack of an appropriate experimental apparatus and an online and real-time monitoring approach. Accordingly, a model test system for the simulation of water inrush during excavation and water injection was developed. Acoustic emission (AE) monitoring during excavation and injection was used to investigate the fracture propagation and water-inrush channel formation in the host rock. Three distinct stages were observed in the AEs over time and were related to the fracture propagation during excavation and injection, namely fracture initiation, fracture extension, and unstable fracture growth (fracture network). The AE results exhibited an increase in AE activities and changes in the AE spatial correlation during the excavation and during the increase in injection pressure. A comparison of photographs of the water-inrush locations and the mechanical characteristics obtained from the AE test verified the proposed method. The results provide valuable insights and a suitable method for the investigation of the mechanism of water inrush in underground engineering.
相似文献8.
射孔作为井筒与储层之间的液流通道,是水力压裂过程中的重要可控性参数。为研究水平井射孔-近井筒破裂机制,采用岩层变形-流体渗流方程描述应力状态变化,应用连续损伤破裂单元表征三维破裂位置与形态演化,并开发有限元求解程序模拟分析了射孔对水平井初始破裂压力、破裂位置及近井筒裂缝复杂性的调控作用。通过与解析模型及射孔压裂物理模型试验结果对比,验证了模型及有限元程序的有效性;水平井破裂压力数值分析结果与现场测试数据吻合较好。研究表明：射孔可调控水平井破裂压力与初始破裂位置,同时对近井筒区域裂缝扩展形态影响显著。通过优化射孔参数可以引导初始破裂向最优破裂面扩展、有效降低破裂压力,减小由于螺旋射孔空间排布引起的水平井近井筒裂缝迂曲与复杂程度,提高致密油气藏压裂改造效果。 相似文献
9.
S. Y. Wang S. W. Sloan S. G. Fityus D. V. Griffiths C. A. Tang 《Rock Mechanics and Rock Engineering》2013,46(5):1165-1182
Rock is a heterogeneous geological material. When rock is subjected to internal hydraulic pressure and external mechanical loading, the fluid flow properties will be altered by closing, opening, or other interaction of pre-existing weaknesses or by induced new fractures. Meanwhile, the pore pressure can influence the fracture behavior on both a local and global scale. A finite element model that can consider the coupled effects of seepage, damage and stress field in heterogeneous rock is described. First, two series of numerical tests in relatively homogeneous and heterogeneous rocks were performed to investigate the influence of pore pressure magnitude and gradient on initiation and propagation of tensile fractures. Second, to examine the initiation of hydraulic fractures and their subsequent propagation, a series of numerical simulations of the behavior of two injection holes inside a saturated rock mass are carried out. The rock is subjected to different initial in situ stress ratios and to an internal injection (pore) pressure at the two injection holes. Numerically, simulated results indicate that tensile fracture is strongly influenced by both pore pressure magnitude and pore pressure gradient. In addition, the heterogeneity of rock, the initial in situ stress ratio (K), the distance between two injection holes, and the difference of the pore pressure in the two injection holes all play important roles in the initiation and propagation of hydraulic fractures. At relatively close spacing and when the two principal stresses are of similar magnitude, the proximity of adjacent injection holes can cause fracturing to occur in a direction perpendicular to the maximum principal stress. 相似文献
10.
A virtual multidimensional internal bond (VMIB) model developed to simulate the propagation of hydraulic fractures using the finite‐element method is formulated within the framework of the virtual internal bond theory (VIB) that considers a solid as randomized material particles in the micro scale, and derives the macro constitutive relation from the cohesive law between the material particles with an implicit fracture criterion. Hydraulic pressure is applied using a new scheme that enables simulation of hydraulically driven cracks. When the model is applied to study hydraulic fracture propagation in the presence of a natural fracture, the results show the method to be very effective. It shows that although the in situ stress ratio is the dominant factor governing the propagation direction, a natural fault can also strongly influence the hydraulic fracture behavior. This influence is conditioned by the shear stiffness of the fault and the distance to the original hydraulic fracture. The model results show that when the fault is strong in shear, its impact on hydraulic fracture trajectory is weak and the hydraulic fracture will likely penetrate the fault. For a weak fault, however, the fracture tends to be arrested at the natural fault. The distance between the fault and the hydraulic fracture is also important; the fault influence increases with decreasing distance. The VMIB does not require selection of a fracture criterion and remeshing when the fracture propagates. Therefore, it is advantageous for modeling fracture initiation and propagation in naturally fractured rock. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
11.
水力压裂是青海共和盆地干热岩地热资源开发的难点技术问题之一。本文基于升级改造的大尺寸真三轴水力压裂物理模拟实验系统模拟干热岩储层高温高压环境,利用青海共和盆地露头岩心进行水力压裂物理模拟实验,揭示干热岩储层水力裂缝的起裂和扩展规律。通过物理模拟实验发现：干热岩储层裂缝起裂可以通过文中提出的起裂模型判断起裂方式和预测起裂压力;水力裂缝在岩石基质中的扩展形态简单,仅沿最大主应力方向延伸;但是水力裂缝会受到岩石中弱面的影响,发生转向沿弱面延伸,形成较复杂的裂缝形态。因此,建议在干热岩储层实际施工中,在天然裂缝发育较丰富的层段开展水力压裂,以实现复杂裂缝网络提取地热能。 相似文献
12.
岩体中普遍存在着断层﹑节理和裂隙等结构面,这些结构面的存在和发展对岩体的整体强度﹑变形及稳定性有极大的影响。因此,研究岩体中原生结构面的萌生﹑发展以及贯通演化过程对评估岩体工程安全性和可靠性具有非常重要的理论与现实意义。扩展有限元法（XFEM）作为一种求解不连续问题的有效数值方法,模拟裂隙时独立于网格,因此,在模拟岩体裂隙扩展﹑水力劈裂等方面具有独特优势。针对扩展有限元法的基本理论及其在岩体裂隙扩展模拟中的应用展开了研究,建立了扩展有限元法求解岩体裂隙摩擦接触、岩体裂隙破坏等问题的数值模型,并将计算模型应用于岩质边坡稳定性分析和重力坝坝基断裂破坏等工程问题。 相似文献
13.
随着扩展有限元理论的深入研究,利用扩展有限元方法模拟水力压裂具有了一定的可操作性。相比于常规有限元方法,XFEM方法具有计算结果精度高和计算量小的优点。但是,如何模拟射孔孔眼、如何模拟流体与岩石相互作用以及分析水力裂缝的扩展规律仍然是难题。以研究水力压裂裂缝扩展规律为目的,建立了岩石多孔介质应力平衡方程、流体渗流连续性方程和边界条件。通过有限元离散化方法对耦合方程矩阵进行处理。通过富集函数定义初始裂缝（射孔孔眼）,选择最大主应力及损伤变量D分别作为裂缝起裂和扩展判定准则,利用水平集方法模拟水力裂缝扩展过程。数值模拟结果显示：增加射孔方位角、压裂液排量和减小水平地应力差,起裂压力上升;黏度对起裂压力无明显影响。增加射孔方位角、压裂液排量、黏度和减小水平地应力差值有助于裂缝宽度的增加。增加水平地应力差值、压裂液排量和减小射孔方位角以及压裂液黏度有助于裂缝长度增加,反之亦然。基于ABAQUS的水力裂缝扩展有限元法可对不同井型和诸多储层物性参数及压裂施工参数进行分析,且裂缝形态逼真,裂缝面凹凸程度清晰,结果准确。此研究可作为一种简便有效研究水力压裂裂缝扩展规律的方法为油田水力压裂设计与施工提供参考与依据。 相似文献
14.
为精准获得岩石I型裂纹扩展演化全过程,采用一种简易裂纹定向扩展装置开展了不同岩性试样裂纹扩展试验研究,借助声发射及数字散斑技术对裂纹扩展全过程进行了监测,建立了裂纹定向扩展力学模型,分析了裂纹扩展过程中声发射及变形场的演化规律,提出了评价岩石I型裂纹扩展难易程度的能量指标CE,探讨了I型裂纹定向起裂扩展机制。结果表明：该简易裂纹定向扩展装置能够有效实现I型裂纹沿预定方向稳定扩展,其起裂角均小于10º,同时通过简化力学模型计算得到白砂岩、灰砂岩的裂纹扩展峰值强度与巴西劈裂抗拉强度相比偏差分别为22.76%、7.53%;根据变形场演化规律,可将裂纹扩展分为微裂隙发育（散斑变形场分区不明显）、主控裂纹孕育（散斑变形场出现分区现象）和主控裂纹扩展3个阶段;声发射演化过程可分为平静期、缓增期、急增期和降低期4个阶段,由于灰砂岩相较于白砂岩质地更致密、更坚硬,导致其声发射平静期长,而后3个阶段持续时间短;将载荷−位移曲线峰前与峰后的面积之比定义为评价岩石I型裂纹扩展难易程度的能量指标CE,计算得到灰砂岩、白砂岩的CE分别为13～16、1～2,表明CE可有效评价岩石I型裂纹扩展难易程度;岩石I型裂纹起裂扩展机制可概况为：在加载峰值前裂隙尖端受最大拉应力作用,存储的弹性能快速增加、耗散能缓慢增加,但在加载峰值后裂隙尖端存储弹性能超过其储能极限迅速释放,此时输入能大部分转化为耗散能促进主控裂纹快速扩展。后续将对裂纹定向扩展试验装置进一步优化改进,以期为裂纹扩展机制、岩石破坏前兆信息、裂纹止裂原理等研究提供一种新方法,同时为工程现场煤岩层定向爆破、压裂、止裂等相关技术优化提供理论指导。 相似文献
15.
储层岩体中的天然结构面对水力压裂缝网改造具有重要的影响。本文采用真实破裂过程分析软件RFPA2D-Flow,在考虑岩体非均质性和岩体渗流-应力-损伤破裂特性的基础上,对不同尺度天然结构面影响的水力压裂裂缝扩展与演化行为进行了模拟分析和讨论,研究结果表明:（1）当水力裂缝遇天然非闭合裂隙时,在水力裂缝靠近非闭合裂隙区间形成拉张应力区,水力裂缝与区间非闭合裂隙间微元体累进性张拉破坏是导致水力裂缝与非闭合裂隙贯通的主要机制;（2）层理等优势结构对水力压裂裂缝扩展及缝网形态影响十分显著,当最大主应力方向与层理面走向小角度相交时,层理结构面对水力裂隙的扩展起主要作用,当最大主应力方向与层理面走向大角度相交时,最大主压应力与层理面共同对缝网扩展起主导作用,随着优势结构面的增多和差应力的增大,水力压裂形成的缝网范围和复杂性程度随之增大;（3）储层水力压裂是一种局部范围内的短暂动力扰动过程,尽管断层的存在可以极大地影响水力裂缝的扩展模式,增大水力裂隙扩展高度,但相比于储层埋深,水力压裂对断层封闭性的破坏范围和断层活动性的扰动程度十分有限。 相似文献
16.
为了研究煤岩水力压裂的起裂压力和水力压裂裂缝扩展规律,采用型煤试样,利用自主研发的水力压裂实验系统,参照现场压裂施工制定了“施加三向应力-顶部注水”的煤岩水力压裂物理模拟实验方案并开展了水力压裂实验,分析了不同条件下泵注压力和水力压裂裂缝。实验结果表明:压裂液泵注排量越大,起裂压力越大。三向应力满足最大水平主应力σH > 垂向应力σv > 最小水平主应力σh,水力压裂裂缝沿着垂直于σh的方向扩展。σv和σh一定,随着σH的增大,煤岩起裂压力先增大后减小,水力压裂裂缝扩展路径越平直。当σH远大于σv和σh时,水力压裂裂缝扩展路径越复杂,分叉缝角度越大。研究结果可为煤岩水力压裂理论的完善提供一定的参考和借鉴。 相似文献
17.
通过室内水力压裂物理模拟试验系统,对大尺寸原煤进行了水力压裂模拟试验,根据水力裂缝的空间展布形态分析了煤岩储层水力裂缝的延伸规律,揭示了网状裂缝的形成机制。结果表明：水力裂缝易在弱层理处分叉和转向,发育的层理和裂缝系统等结构面为压裂形成裂缝网络提供了前提条件。泵压曲线呈现出的频繁波动是煤岩内产生网状裂缝的一个显著特征。水力裂缝的起裂与延伸有4种基本模式,裂缝网络的形成多为这4种基本模式的组合。地应力差异系数和泵注排量对煤层水力裂缝形态有较大影响。较小的地应力差异系数更利于网状裂缝的形成;较高的压裂液排量易形成相对简单的裂缝形态,导致压裂改造效果较差。该试验方法和试验结果可为现场水力压裂参数设计和优化提供参考和依据。 相似文献
18.
Rock formations in Glutenite reservoirs typically display highly variable lithology and permeability, low and complex porosity, and significant heterogeneity. It is difficult to predict the pathway of hydraulic fractures in such rock formations. To capture the complex hydraulic fractures in rock masses, a numerical code called Rock Failure Process Analysis (RFPA2D) is introduced. Based on the characteristics of a typical Glutenite reservoir in China, a series of 2D numerical simulations on the hydraulic fractures in a small-scale model are conducted. The initiation, propagation and associated stress evolution of the hydraulic fracture during the failure process, which cannot be observed in experimental tests, are numerically simulated. Based on the numerical results, the hydraulic fracturing path and features are illustrated and discussed in detail. The influence of the confining stress ratio, gravel sizes (indicated by the diameter variation), and gravel volume content (VC) on the hydraulic fracturing pattern in a conglomerate specimen are numerically investigated, and the breakdown pressure is quantified as a function of these variables. Five hydraulic fracturing modes are identified: termination, deflection, branching (bifurcation), penetration, and attraction. The propagation trajectory of the primary hydraulic fractures is determined by the maximum and minimum stress ratios, although the fracturing path on local scales is clearly influenced by the presence of gravels in the conglomerate, particularly when the gravels are relatively large. As the stress ratio increases, the fractures typically penetrate through the gravels completely rather than propagating around the gravels, and the breakdown pressure decreases with increasing stress ratio. Furthermore, the breakdown pressure is affected by the size and volume content of the gravel in the conglomerate: as the gravel size and volume content increase, the breakdown pressure increases. 相似文献
19.
为研究大倾角煤层水力压裂裂缝扩展形态，采用大尺寸真三轴压裂模拟系统，分别开展最大水平主应力沿地层走向和沿地层倾向的60°倾角煤层水力裂缝扩展物理模拟实验。结果表明:最大主应力方向沿地层走向时，裂缝起裂容易，缝高受限，裂缝连通性好，裂缝的开启主要沿层理和天然裂缝，形成垂直缝形态，地层倾角对压裂施工影响相对较小，建议进行大规模压裂以充分改造煤储层；最大主应力方向沿地层倾向时，裂缝起裂困难，前期缝高受限，后期缝高失控，裂缝连通性差，受节理影响，不易形成主缝，所以裂缝扩展困难，转向及多级破裂较多，此类煤层建议进行多级小规模压裂改造。实验结果对新疆等地区大倾角煤层的改造模式和改造规模具有指导作用。 相似文献
20.
Gas shales are one type of unconventional reservoirs which have attracted significant attention for gas production in recent years. Gas production from very tight shales requires employment of hydraulic fracturing as a stimulation technique. To design hydraulic fracture operation the mechanical properties of the targeted and surrounding formations should be estimated. Also, the magnitude and orientation of in situ stresses in the field need to be known to estimate the fracture initiation and propagation pressures. This study focuses on gas shale characteristics in the North Perth Basin and uses data corresponding to well Arrowsmith-2 (AS-2) which is the first dedicated shale gas well drilled in Western Australia. A log-based analysis was used to build the rock mechanical model (RMM). The RMM results were used to set up a hydraulic fracturing laboratory experiment. The test was done in the presence of three principal stresses to mimic the real field stress conditions. The test results include the pressure–time curve which was used to estimate the initiation and propagation pressure at that depth. The results were used to draw some practical conclusions related to hydraulic fracturing operation in the field. 相似文献