共查询到20条相似文献，搜索用时 15 毫秒
1.
Effects of the sea floor topography on the 1D inversion of time‐domain marine controlled source electromagnetic data 
下载免费PDF全文
下载免费PDF全文 Time‐domain marine controlled source electromagnetic methods have been used successfully for the detection of resistive targets such as hydrocarbons, gas hydrate, or marine groundwater aquifers. As the application of time‐domain marine controlled source electromagnetic methods increases, surveys in areas with a strong seabed topography are inevitable. In these cases, an important question is whether bathymetry information should be included in the interpretation of the measured electromagnetic field or not. Since multi‐dimensional inversion is still not common in time‐domain marine controlled source electromagnetic methods, bathymetry effects on the 1D inversion of single‐offset and multi‐offset joint inversions of time‐domain controlled source electromagnetic methods data are investigated. We firstly used an adaptive finite element algorithm to calculate the time‐domain controlled source electromagnetic methods responses of 2D resistivity models with seafloor topography. Then, 1D inversions are applied on the synthetic data derived from marine resistivity models, including the topography in order to study the possible topography effects on the 1D interpretation. To evaluate the effects of topography with various steepness, the slope angle of the seabed topography is varied in the synthetic modelling studies for deep water (air interaction is absent or very weak) and shallow water (air interaction is dominant), respectively. Several different patterns of measuring configurations are considered, such as the systems adopting nodal receivers and the bottom‐towed system. According to the modelling results for deep water when air interaction is absent, the 2D topography can distort the measured electric field. The distortion of the data increases gradually with the enlarging of the topography's slope angle. In our test, depending on the configuration, the seabed topography does not affect the 1D interpretation significantly if the slope angle is less or around 10°. However, if the slope angle increases to 30° or more, it is possible that significant artificial layers occur in inversion results and lead to a wrong interpretation. In a shallow water environment with seabed topography, where the air interaction dominates, it is possible to uncover the true subsurface resistivity structure if the water depth for the 1D inversion is properly chosen. In our synthetic modelling, this scheme can always present a satisfactory data fit in the 1D inversion if only one offset is used in the inversion process. However, the determination of the optimal water depth for a multi‐offset joint inversion is challenging due to the various air interaction for different offsets. 相似文献
2.
Joint inversion of long‐offset and central‐loop transient electromagnetic data: Application to a mud volcano exploration in Perekishkul,Azerbaijan 下载免费PDF全文
下载免费PDF全文 J. Adrian R. Bergers M. Gurk B. Tezkan A. L. Mammadov A. G. Novruzov 《Geophysical Prospecting》2015,63(2):478-494
Mud volcanism is commonly observed in Azerbaijan and the surrounding South Caspian Basin. This natural phenomenon is very similar to magmatic volcanoes but differs in one considerable aspect: Magmatic volcanoes are generally the result of ascending molten rock within the Earth's crust, whereas mud volcanoes are characterised by expelling mixtures of water, mud, and gas. The majority of mud volcanoes have been observed on ocean floors or in deep sedimentary basins, such as those found in Azerbaijan. Furthermore, their occurrences in Azerbaijan are generally closely associated with hydrocarbon reservoirs and are therefore of immense economic and geological interest. The broadside long‐offset transient electromagnetic method and the central‐loop transient electromagnetic method were applied to study the inner structure of such mud volcanoes and to determine the depth of a resistive geological formation that is predicted to contain the majority of the hydrocarbon reservoirs in the survey area. One‐dimensional joint inversion of central‐loop and long‐offset transient electromagnetic data was performed using the inversion schemes of Occam and Marquardt. By using the joint inversion models, a subsurface resistivity structure ranging from the surface to a depth of approximately 7 km was determined. Along a profile running perpendicular to the assumed strike direction, lateral resistivity variations could only be determined in the shallow depth range using the transient electromagnetic data. An attempt to resolve further two‐dimensional/three‐dimensional resistivity structures, representing possible mud migration paths at large depths using the long‐offset transient electromagnetic data, failed. Moreover, the joint inversion models led to ambiguous results regarding the depth and resistivity of the hydrocarbon target formation due to poor resolution at great depths (>5 km). Thus, 1D/2D modelling studies were subsequently performed to investigate the influence of the resistive terminating half‐space on the measured long‐offset transient electromagnetic data. The 1D joint inversion models were utilised as starting models for both the 1D and 2D modelling studies. The results tend to show that a resistive terminating half‐space, implying the presence of the target formation, is the favourable geological setting. Furthermore, the 2D modelling study aimed to fit all measured long‐offset transient electromagnetic Ex transients along the profile simultaneously. Consequently, 3125 2D forward calculations were necessary to determine the best‐fit resistivity model. The results are consistent with the 1D inversion, indicating that the data are best described by a resistive terminating half‐space, although the resistivity and depth cannot be determined clearly. 相似文献
3.
In this paper we propose a 3D acoustic full waveform inversion algorithm in the Laplace domain. The partial differential equation for the 3D acoustic wave equation in the Laplace domain is reformulated as a linear system of algebraic equations using the finite element method and the resulting linear system is solved by a preconditioned conjugate gradient method. The numerical solutions obtained by our modelling algorithm are verified through a comparison with the corresponding analytical solutions and the appropriate dispersion analysis. In the Laplace‐domain waveform inversion, the logarithm of the Laplace transformed wavefields mainly contains long‐wavelength information about the underlying velocity model. As a result, the algorithm smoothes a small‐scale structure but roughly identifies large‐scale features within a certain depth determined by the range of offsets and Laplace damping constants employed. Our algorithm thus provides a useful complementary process to time‐ or frequency‐domain waveform inversion, which cannot recover a large‐scale structure when low‐frequency signals are weak or absent. The algorithm is demonstrated on a synthetic example: the SEG/EAGE 3D salt‐dome model. The numerical test is limited to a Laplace‐domain synthetic data set for the inversion. In order to verify the usefulness of the inverted velocity model, we perform the 3D reverse time migration. The migration results show that our inversion results can be used as an initial model for the subsequent high‐resolution waveform inversion. Further studies are needed to perform the inversion using time‐domain synthetic data with noise or real data, thereby investigating robustness to noise. 相似文献
4.
为了降低单一地球物理方法反演的多解性及受噪声的影响程度,本文围绕重力、磁法和大地电磁法开展了三维联合反演的研究.重、磁采用基于对数障碍法的正则化反演算法,大地电磁使用limited-memory BroydenFletcher-Goldfarb-Shanno(L-BFGS)反演算法,引入交叉梯度函数实现了三种物性结构的相互耦合,最终开发出一套重磁电三维联合反演算法,并实现MPI并行加速计算.通过理论模型算例验证了算法的准确性,结果表明:不论是单棱柱体模型还是组合棱柱体模型,联合反演结果相较单独反演对于异常体的空间形态刻画以及物性数值恢复具有较好的提升;单棱柱体模型算例使得异常体的物性参数(密度、磁化率和电阻率)更加接近于真实的物性参数;组合棱柱体模型的联合反演结果不仅仅消除了围岩物性参数的假异常,而且还增强了异常体边界结构的恢复程度. 相似文献
5.
Illuminating and optimising a three‐dimensional model of an oil shale seam and its volume distribution using the transient electromagnetic induction method,central part of Jordan 下载免费PDF全文
下载免费PDF全文 The oil shale exploration program in Jordan is undertaking great activity in the domain of applied geophysical methods to evaluate bitumen‐bearing rock. In the study area, the bituminous marl or oil shale exhibits a rock type dominated by lithofacies layers composed of chalky limestone, marls, clayey marls, and phosphatic marls. The study aims to present enhancements for oil shale seam detection using progressive interpretation from a one‐dimensional inversion to a three‐dimensional modelling and inversion of ground‐based transient electromagnetic data at an area of stressed geological layers. The geophysical survey combined 58 transient electromagnetic sites to produce geoelectrical structures at different depth slices, and cross sections were used to characterise the horizon of the most likely sites for mining oil shale. The results show valuable information on the thickness of the oil shale seam at 3.7 Ωm, which is correlated to the geoelectrical layer between 2‐ and 4 ms transient time delays, and at depths ranging between 85 and 105 m. The 300 m penetrated depth of the transient electromagnetic soundings allows the resolution of the main geological units at narrow resistivity contrast and the distinction of the main geological structures that constrain the detection of the oil shale seam. This geoelectrical layer at different depth slices illustrates a localised oil shale setting and can be spatially correlated with an area bounded by fold and fault systems. Also, three‐dimensional modelling and inversion for synthetic and experimental data are introduced at the faulted area. The results show the limitations of oil shale imaging at a depth exceeding 130 m, which depends on the near‐surface resistivity layer, the low resistivity contrast of the main lithological units, and the degree of geological detail achieved at a suitable model's misfit value. 相似文献
6.
叠前地质统计学反演将随机模拟与叠前反演相结合,不仅可以反演各种储层弹性参数,还提高了反演结果的分辨率.基于联合概率分布的直接序贯协模拟方法可以在原始数据域对数据进行模拟,不需要对数据进行高斯变换,拓展了地质统计学反演的应用范围;而联合概率分布的应用确保了反演参数之间相关性,提高了反演的精度.本文将基于联合概率分布的直接序贯协模拟方法与蒙特卡洛抽样算法相结合,参考全局随机反演策略,提出了基于蒙特卡洛优化算法的全局迭代地质统计学反演方法.为了提高反演的稳定性,我们修改了局部相关系数的计算公式,提出了一种新的基于目标函数的优化局部相关系数计算公式并应用到协模拟之中.模型测试及实际数据应用表明,该方法可以很好的应用于叠前反演之中. 相似文献
7.
8.
Two‐dimensional joint inversions of cross‐hole resistivity data and resolution analysis of combined arrays 下载免费PDF全文
下载免费PDF全文 In this study, a new two‐dimensional inversion algorithm was developed for the inversion of cross‐hole direct current resistivity measurements. In the last decades, various array optimisation methods were suggested for resistivity tomography. However, researchers have still collected data by using classical electrode arrays in most cross‐hole applications. Therefore, we investigated the accuracy of both the individual and the joint inversion of the classical cross‐hole arrays by using both synthetic and field data with the developed algorithm. We showed that the joint inversion of bipole–bipole, pole–bipole, bipole–pole, and pole–tripole electrode arrays gives inverse solutions that are closer to the real model than the individual inversions of the electrode array datasets for the synthetic data inversion. The model resolution matrix of the suggested arrays was used to analyse the inversion results. This model resolution analysis also showed the advantage of the joint inversion of bipole–bipole, pole–bipole, bipole–pole, and pole–tripole arrays. We also used sensitivity sections from each of the arrays and their superpositions to explain why joint inversion gives better resolution than the any individual inversion result. 相似文献
9.
密度界面反演作为了解地球内部结构的一种重要方法,长期以来都是重力学研究的主要内容.本文结合抛物线密度模型及频率域算法的优点,将抛物线密度函数应用于Parker-Oldenburg算法,经过理论推导得到了抛物线密度模型的频率域公式,从而建立了基于抛物线密度模型的三维密度界面重力异常正反演的算法和流程.理论模型数据试验表明本方法快速、有效,适用于大多数浅部比深部增加更快的实际地壳密度.研究中还利用该方法对川滇地区重力异常进行了反演,获得了该区的莫霍面深度分布,并与接收函数研究结果进行对比分析,进一步验证了本文方法的正确性和有效性. 相似文献
10.
A robust approach to time‐to‐depth conversion and interval velocity estimation from time migration in the presence of lateral velocity variations 下载免费PDF全文
下载免费PDF全文 Sergey Fomel 《Geophysical Prospecting》2015,63(2):315-337
The problem of conversion from time‐migration velocity to an interval velocity in depth in the presence of lateral velocity variations can be reduced to solving a system of partial differential equations. In this paper, we formulate the problem as a non‐linear least‐squares optimization for seismic interval velocity and seek its solution iteratively. The input for the inversion is the Dix velocity, which also serves as an initial guess. The inversion gradually updates the interval velocity in order to account for lateral velocity variations that are neglected in the Dix inversion. The algorithm has a moderate cost thanks to regularization that speeds up convergence while ensuring a smooth output. The proposed method should be numerically robust compared to the previous approaches, which amount to extrapolation in depth monotonically. For a successful time‐to‐depth conversion, image‐ray caustics should be either nonexistent or excluded from the computational domain. The resulting velocity can be used in subsequent depth‐imaging model building. Both synthetic and field data examples demonstrate the applicability of the proposed approach. 相似文献
11.
Constraining the anisotropy structure of the crust by joint inversion of seismic reflection travel times and wave polarizations 总被引：2，自引：0，他引：2
In the context of wide-angle seismic profiling, the determination of the physical properties of the Earth crust, such as the
elastic layer depth and seismic velocity, is often performed by inversion of P- and/or S-phases propagation data supplying
the geometry of the medium (reflector depths) or any other structural parameter (P- or S-wave velocity, density...). Moreover,
the inversion for velocity structure and interfaces is commonly performed using only seismic reflection travel times and/or
crustal phase amplitudes in isotropic media. But it is very important to utilize more available information to constrain the
non-uniqueness of the solution. In this paper, we present a simultaneous inversion method of seismic reflection travel times
and polarizations data of transient elastic waves in stratified media to reconstruct not only layer depth and vertical P-wave
velocity but also the anisotropy feature of the crust based on the estimation of the Thomsen’s parameters. We carry out
a checking with synthetic data, comparing the inversion results obtained by anisotropic travel-time inversion to the results
derived by joint inversion of seismic reflection travel times and polarizations data. The comparison proves that the first
procedure leads to biased anisotropic models, while the second one fits nearly the real model. This makes the joint inversion
method feasible. Finally, we investigate the geometry, P-wave velocity structure and anisotropy of the crust beneath Southeastern
China by applying the proposed inversion method to previously acquired wide-angle seismic data. In this case, the anisotropy
signature provides clear evidence that the Jiangshan-Shaoxing fault is the natural boundary between the Yangtze and Cathaysia
blocks. 相似文献
12.
3D joint inversion of magnetotelluric and airborne tipper data: a case study from the Morrison porphyry Cu–Au–Mo deposit,British Columbia,Canada 下载免费PDF全文
下载免费PDF全文 Benjamin M. Lee Martyn J. Unsworth Juliane Hübert Jeremy P. Richards Jean M. Legault 《Geophysical Prospecting》2018,66(2):397-421
Z‐axis tipper electromagnetic and broadband magnetotelluric data were used to determine three‐dimensional electrical resistivity models of the Morrison porphyry Cu–Au–Mo deposit in British Columbia. Z‐axis tipper electromagnetic data are collected with a helicopter, thus allowing rapid surveys with uniform spatial sampling. Ground‐based magnetotelluric surveys can achieve a greater exploration depth than Z‐axis tipper electromagnetic surveys, but data collection is slower and can be limited by difficult terrain. The airborne Z‐axis tipper electromagnetic tipper data and the ground magnetotelluric tipper data show good agreement at the Morrison deposit despite differences in the data collection method, spatial sampling, and collection date. Resistivity models derived from individual inversions of the Z‐axis tipper electromagnetic tipper data and magnetotelluric impedance data contain some similar features, but the Z‐axis tipper electromagnetic model appears to lack resolution below a depth of 1 km, and the magnetotelluric model suffers from non‐uniform and relatively sparse spatial sampling. The joint Z‐axis tipper electromagnetic inversion solves these issues by combining the dense spatial sampling of the airborne Z‐axis tipper electromagnetic technique and the deeper penetration of the lower frequency magnetotelluric data. The resulting joint resistivity model correlates well with the known geology and distribution of alteration at the Morrison deposit. Higher resistivity is associated with the potassic alteration zone and volcanic country rocks, whereas areas of lower resistivity agree with known faults and sedimentary units. The pyrite halo and ≥0.3% Cu zone have the moderate resistivity that is expected of disseminated sulphides. The joint Z‐axis tipper electromagnetic inversion provides an improved resistivity model by enhancing the lateral and depth resolution of resistivity features compared with the individual Z‐axis tipper electromagnetic and magnetotelluric inversions. This case study shows that a joint Z‐axis tipper electromagnetic–magnetotelluric approach effectively images the interpreted mineralised zone at the Morrison deposit and could be beneficial in exploration for disseminated sulphides at other porphyry deposits. 相似文献
13.
在地震勘探中,描述复杂介质的正演和反演问题通常包含许多反映介质不同特性的参数.同时获得这些参数对进行更准确的岩性描述和油藏预测具有重要的理论和现实意义.为了提高频率域黏弹性波动方程的零偏VSP多参数反演的精度,本文对多参数反演的可行性进行分析,明确了目标函数的敏感程度及参数之间的耦合情况,提出了一种基于走时约束的分频分步多参数反演策略.首先利用零偏VSP资料构建先验信息,然后分别利用高、低频数据进行两步反演,也就是"三个参数反演+五个参数反演"的过程,以提高反演的稳健性和精度.利用此方法可同时得到零偏VSP数据可靠的弹性波速度、密度和品质因子,为精确的时-深关系及含油气的解释和预测奠定基础,同时也可以为地面地震叠前反演提供可靠有效的约束,增强地面地震反演精度. 相似文献
14.
Joint inversion of Rayleigh‐wave dispersion data and vertical electric sounding data: synthetic tests on characteristic sub‐surface models 下载免费PDF全文
下载免费PDF全文 In the traditional inversion of the Rayleigh dispersion curve, layer thickness, which is the second most sensitive parameter of modelling the Rayleigh dispersion curve, is usually assumed as correct and is used as fixed a priori information. Because the knowledge of the layer thickness is typically not precise, the use of such a priori information may result in the traditional Rayleigh dispersion curve inversions getting trapped in some local minima and may show results that are far from the real solution. In this study, we try to avoid this issue by using a joint inversion of the Rayleigh dispersion curve data with vertical electric sounding data, where we use the common‐layer thickness to couple the two methods. The key idea of the proposed joint inversion scheme is to combine methods in one joint Jacobian matrix and to invert for layer S‐wave velocity, resistivity, and layer thickness as an additional parameter, in contrast with a traditional Rayleigh dispersion curve inversion. The proposed joint inversion approach is tested with noise‐free and Gaussian noise data on six characteristic, synthetic sub‐surface models: a model with a typical dispersion; a low‐velocity, half‐space model; a model with particularly stiff and soft layers, respectively; and a model reproduced from the stiff and soft layers for different layer‐resistivity propagation. In the joint inversion process, the non‐linear damped least squares method is used together with the singular value decomposition approach to find a proper damping value for each iteration. The proposed joint inversion scheme tests many damping values, and it chooses the one that best approximates the observed data in the current iteration. The quality of the joint inversion is checked with the relative distance measure. In addition, a sensitivity analysis is performed for the typical dispersive sub‐surface model to illustrate the benefits of the proposed joint scheme. The results of synthetic models revealed that the combination of the Rayleigh dispersion curve and vertical electric sounding methods in a joint scheme allows to provide reliable sub‐surface models even in complex and challenging situations and without using any a priori information. 相似文献
15.
Ho Seuk Bae Changsoo Shin Young Ho Cha Yunseok Choi Dong‐Joo Min 《Geophysical Prospecting》2010,58(6):997-1010
Although waveform inversion has been intensively studied in an effort to properly delineate the Earth's structures since the early 1980s, most of the time‐ and frequency‐domain waveform inversion algorithms still have critical limitations in their applications to field data. This may be attributed to the highly non‐linear objective function and the unreliable low‐frequency components. To overcome the weaknesses of conventional waveform inversion algorithms, the acoustic Laplace‐domain waveform inversion has been proposed. The Laplace‐domain waveform inversion has been known to provide a long‐wavelength velocity model even for field data, which may be because it employs the zero‐frequency component of the damped wavefield and a well‐behaved logarithmic objective function. However, its applications have been confined to 2D acoustic media. We extend the Laplace‐domain waveform inversion algorithm to a 2D acoustic‐elastic coupled medium, which is encountered in marine exploration environments. In 2D acoustic‐elastic coupled media, the Laplace‐domain pressures behave differently from those of 2D acoustic media, although the overall features are similar to each other. The main differences are that the pressure wavefields for acoustic‐elastic coupled media show negative values even for simple geological structures unlike in acoustic media, when the Laplace damping constant is small and the water depth is shallow. The negative values may result from more complicated wave propagation in elastic media and at fluid‐solid interfaces. Our Laplace‐domain waveform inversion algorithm is also based on the finite‐element method and logarithmic wavefields. To compute gradient direction, we apply the back‐propagation technique. Under the assumption that density is fixed, P‐ and S‐wave velocity models are inverted from the pressure data. We applied our inversion algorithm to the SEG/EAGE salt model and the numerical results showed that the Laplace‐domain waveform inversion successfully recovers the long‐wavelength structures of the P‐ and S‐wave velocity models from the noise‐free data. The models inverted by the Laplace‐domain waveform inversion were able to be successfully used as initial models in the subsequent frequency‐domain waveform inversion, which is performed to describe the short‐wavelength structures of the true models. 相似文献
16.
Leonardo Azevedo Rúben Nunes Amílcar Soares Guenther Schwedersky Neto Teresa S. Martins 《Geophysical Prospecting》2018,66(Z1):116-131
Seismic inversion plays an important role in reservoir modelling and characterisation due to its potential for assessing the spatial distribution of the sub‐surface petro‐elastic properties. Seismic amplitude‐versus‐angle inversion methodologies allow to retrieve P‐wave and S‐wave velocities and density individually allowing a better characterisation of existing litho‐fluid facies. We present an iterative geostatistical seismic amplitude‐versus‐angle inversion algorithm that inverts pre‐stack seismic data, sorted by angle gather, directly for: density; P‐wave; and S‐wave velocity models. The proposed iterative geostatistical inverse procedure is based on the use of stochastic sequential simulation and co‐simulation algorithms as the perturbation technique of the model parametre space; and the use of a genetic algorithm as a global optimiser to make the simulated elastic models converge from iteration to iteration. All the elastic models simulated during the iterative procedure honour the marginal prior distributions of P‐wave velocity, S‐wave velocity and density estimated from the available well‐log data, and the corresponding joint distributions between density versus P‐wave velocity and P‐wave versus S‐wave velocity. We successfully tested and implemented the proposed inversion procedure on a pre‐stack synthetic dataset, built from a real reservoir, and on a real pre‐stack seismic dataset acquired over a deep‐water gas reservoir. In both cases the results show a good convergence between real and synthetic seismic and reliable high‐resolution elastic sub‐surface Earth models. 相似文献
17.
全波形反演是一种高精度的反演方法,其目标函数是一个强非线性函数,易受局部极值影响,而且反演过程计算量较大.波场重构反演是近几年提出的一种改进的全波形反演理论.该反演方法通过将波动方程作为惩罚项引入到目标函数中,通过拓宽解的寻找空间减弱了局部极小值的影响,而且反演过程不需要计算伴随波场,提高了计算效率.但该反演方法一直缺少准确的惩罚因子算法,直接影响到该方法的准确度.本文将波场重构反演拓展到时间域并利用梯度法进行波场重构.频率域的惩罚因子用来加强波动方程的约束,而时间域惩罚因子表现为调节模拟波场和实际波场的权重因子.为此,我们根据约束优化理论,在波动方程准确以及重构波场与反演参数解耦的假设下,提出以波动方程为目标函数的新的惩罚因子算法.根据波形反演在应用时普遍存在的噪音干扰、子波错误和低频信息缺失的情况下,应用部分Sigsbee2A模型合成数据对本文提出的算法进行实验.数值实验结果表明：基于新的惩罚因子算法,在其他信息不准确的情况下,波场重构反演可以给出高精度的反演结果. 相似文献
18.
Rongzhe Zhang Tonglin Li Xinhui Deng Xingguo Huang Yongchol Pak 《Geophysical Prospecting》2020,68(2):721-731
In recent years, joint inversion has been widely used for integrated geological interpretation. We extended a data-space joint inversion algorithm of magnetotelluric, gravity and magnetic data to include first-arrival seismic travel-time and normalized cross-gradient constraints. We describe the main features of the algorithm and apply it to synthetic data generated for hypothetical models. For the synthetic data, we find that the joint inversion with multiple parameters is superior to the joint inversion with two or even three parameters, which can reduce the multisolution of inversion results more effectively. Furthermore, data-space joint inversion involves fewer memory requirements and better calculation speeds than traditional model-space joint inversion. The normalized cross-gradient constraints can better couple model parameters of different magnitudes compared with traditional unnormalized cross-gradient constraints, resulting in higher levels of structural similarity among resistivity, density, magnetic susceptibility and velocity models. 相似文献
19.
瞬变电磁法的严格三维反演计算复杂、占用资源多,在普通计算机上难以实现.本文引入瞬变电磁矩变换的概念,提出一种快速三维反演方法.该方法基于阻性限制(resistive limit)特性,建立包含异常体的三维大地的一阶矩响应正演算法,根据不同约束条件,选择优化的最速下降法实现瞬变电磁快速三维反演.文中通过含异常体的三维大地正演一阶矩与仿真数据一阶矩的对比,验证了快速三维正演算法的有效性,之后在不同约束条件下,利用优化的最速下降法实现了对含噪声的仿真瞬变电磁数据的快速三维反演.结果表明,该方法能够在普通计算机上短时间内较为准确地反演出地下异常体的体积和位置,在瞬变电磁数据的实时解释工作中具有良好的应用前景. 相似文献
20.
Until the present time the ‘ rock-coal-rock’ layer sequence and offsets in coal-seams in underground coal mines have been detected with the aid of seismic waves and geoelectric measurements. In order to determine the geometrical and petrophysical parameters of the coal-seam situation, the data recorded using seismic and geoelectric methods have been inverted independently. In consequence, the inversion of partially inaccurate data resulted in a certain degree of ambiguity. This paper presents the first results of a joint inversion scheme to process underground vertical seismic profiling data, geolectric resistivity and resistance data. The joint inversion algorithm makes use of the damped least-squares method and its weighted version to solve the linearized set of equations for the seismic and geolectric unknowns. In order to estimate the accuracy and reliability of the derived geometrical and petrophysical layer parameters, both a model covariance matrix and a correlation matrix are calculated. The weighted least-squares algorithm is based on the method of most frequent values (MFV). The weight factors depend on the difference between measured data and those calculated by an iteration process. The joint inversion algorithm is tested by means of synthetic data. Compared to the damped least-squares algorithm, the MFV inversion leads to smaller estimation errors as well as lower sensitivities due to the choice of the initial model. It is shown that, compared to an independent inversion, the correlation between the model parameters is definitely reduced, while the accuracy of the parameter estimation is appreciably increased by the joint inversion process. Thus the ambiguity is significantly reduced. Finally, the joint inversion algorithm using the MFV method is applied to underground field data. The model parameters can be derived with a sufficient degree of accuracy, even in the case of noisy data. 相似文献