共查询到20条相似文献，搜索用时 46 毫秒
1.
Understanding the roles of Cenozoic strike-slip faults in SE Asia observed in outcrop onshore, with their offshore continuation has produced a variety of structural models (particularly pull-apart vs. oblique extension, escape tectonics vs. slab-pull-driven extension) to explain their relationships to sedimentary basins. Key problems with interpreting the offshore significance of major strike-slip faults are: (1) reconciling conflicting palaeomagnetic data, (2) discriminating extensional, and oblique-extensional fault geometries from strike-slip geometries on 2D seismic reflection data, and (3) estimating strike-slip displacements from seismic reflection data.Focus on basic strike-slip fault geometries such as restraining vs. releasing bends, and strongly splaying geometries approach the gulfs of Thailand and Tonkin, suggest major strike-slip faults probably do not extend far offshore Splays covering areas 10,000’s km2 in extent are characteristic of the southern portions of the Sagaing, Mae Ping, Three Pagodas and Ailao Shan-Red River faults, and are indicative of major faults dying out. The areas of the fault tips associated with faults of potentially 100 km+ displacement, scale appropriately with global examples of strike-slip faults on log–log displacement vs. tip area plots. The fault geometries in the Song Hong-Yinggehai Basin are inappropriate for a sinistral pull-apart geometry, and instead the southern fault strands of the Ailao Shan-Red River fault are interpreted to die out within the NW part of the Song Hong-Yinggehai Basin. Hence the fault zone does not transfer displacement onto the South China Seas spreading centre. The strike-slip faults are replaced by more extensional, oblique-extensional fault systems offshore to the south. The Sagaing Fault is also superimposed on an older Paleogene–Early Miocene oblique-extensional rift system. The Sagaing Fault geometry is complex, and one branch of the offshore fault zone transfers displacement onto the Pliocene-Recent Andaman spreading centre, and links with the West Andaman and related faults to form a very large pull-apart basin. 相似文献
2.
Prantik Mandal 《Journal of Asian Earth Sciences》2011,40(1):150-161
A high-resolution passive seismic experiment in the Kachchh rift zone of the western India has produced an excellent dataset of several thousands teleseismic events. From this network, 500 good teleseismic events recorded at 14 mobile broadband sites are used to estimate receiver functions (for the 30–310° back-azimuth ranges), which show a positive phase at 4.5–6.1 s delay time and a strong negative phase at 8.0–11.0 s. These phases have been modeled by a velocity increase at Moho (i.e. 34–43 km) and a velocity decrease at 62–92 km depth. The estimation of crustal and lithospheric thicknesses using the inversion of stacked radial receiver functions led to the delineation of a marked thinning of 3–7 km in crustal thickness and 6–14 km in lithospheric thickness beneath the central rift zone relative to the surrounding un-rifted parts of the Kachchh rift zone. On an average, the Kachchh region is characterized by a thin lithosphere of 75.9 ± 5.9 km. The marked velocity decrease associated with the lithosphere–asthenoshere boundary (LAB), observed over an area of 120 km × 80 km, and the isotropic study of xenoliths from Kachchh provides evidence for local asthenospheric updoming with pockets of partial melts of CO2 rich lherzolite beneath the Kachchh seismic zone that might have caused by rifting episode (at 88 Ma) and the associated Deccan thermal-plume interaction (at 65 Ma) episodes. Thus, the coincidence of the area of the major aftershock activity and the Moho as well as asthenospheric upwarping beneath the central Kachchh rift zone suggests that these pockets of CO2-rich lherzolite partial melts could perhaps provide a high input of volatiles containing CO2 into the lower crust, which might contribute significantly in the seismo-genesis of continued aftershock activity in the region. It is also inferred that large stresses in the denser and stronger lower crust (at 14–34 km depths) induced by ongoing Banni upliftment, crustal intrusive, marked lateral variation in crustal thickness and related sub-crustal thermal anomaly play a key role in nucleating the lower crustal earthquakes beneath the Kachchh seismic zone. 相似文献
3.
The Longmen Shan (LMS), which constitutes the eastern border of the Tibetan Plateau, is about 400 km in length and characterized by a steep topographic transition from the Sichuan Basin to the plateau. The 2008 Mw7.9 Wenchuan earthquake and 2013 Mw6.6 Lushan earthquake were associated with the central to northern segments and southern segment of the LMS fault belt, respectively. In this paper, zircon and apatite fission track (ZFT and AFT, respectively) dating in combination with previously published low temperature thermochronology studies are used to constrain both the exhumation history and fault activity along the LMS, with a special focus on the southern segment. In the southern segment of the LMS, the ZFT ages in the hanging wall of the Wulong-Yanjing fault 10–14 Ma, increasing to ca. 30 Ma to the northwest of the faults and to 100–200 Ma in the plateau region. The AFT ages are 3–5 Ma at the mountain front and increase to 8–26 Ma in the plateau. We show that these age distributions are controlled by fault geometry. Two stages of rapid exhumation were identified using apatite fission track length modeling and the age distributions in the southern segment of the LMS. The first stage is from ca. 30 Ma and the second stage is from 3–5 Ma to present. In contrast with the middle segment of the LMS, the Cenozoic exhumation rate is higher in the southern segment of the LMS, which may be due to the influence of the collision between the India and Eurasia plates and/or different faulting mechanisms in the different segments. 相似文献
4.
Within the Namche Barwa area, SE Tibet, the Indus–Yarlung suture zone separates the Lhasa terrain in the north from the Himalayan unit including the Tethyan (sedimentary and volcanic rocks), Dongjiu (greenschist to lower amphibolite facies), Namche Barwa (granulite facies), Pei (amphibolite facies) and Laiguo (greenschist facies) sequences in the south. Two fault systems were distinguished in the Namche Barwa area. The former includes a top-down-to-the-north normal fault in the north and two top-to-the-south thrust zones in the south named as Upper and Lower Thrusts, respectively. The Namche Barwa and Pei sequences were exhumed southwards from beneath the Dongjiu sequence by these faults. Thus, the fault system is regarded as a southward extrusion structure. Subsequently, the exposed Dongjiu, Namche Barwa, Pei and Laiguo sequences were displaced northwards onto the Lhasa terrain by the top-to-the-north fault system, thus, marking it as northward indentation structure. Monazite TIMS U–Pb dating demonstrates that the normal fault and the Lower Thrust from the southward extrusion system were probably active at ~ 6 Ma and ~ 10 Ma, respectively. Zircon U–Pb SHRIMP and phlogopite K–Ar ages further suggest that the Upper Thrust was active between 6.2 ± 0.2 Ma and 5.5 ± 0.2 Ma. The northward indentation structures within the core portion of the eastern Himalayan syntaxis were perhaps active between 3.0 Ma and 1.5 Ma, as inferred by published zircon U–Pb SHRIMP and hornblende Ar–Ar ages. The monazite from upper portions of the Pei sequence dated by U–Pb TIMS indicates that the precursor sediments of this sequence were derived from Proterozoic source regions. Nd isotopic data further suggest that all the metamorphic rocks within eastern Himalaya (εNd = ? 13 to ? 19) correlate closely with those from the Greater Himalayan Sequences, whereas the western Himalayan syntaxis is mainly comprised of Lesser Himalayan Sequences. The two indented corners of the Himalaya are, thus, different. 相似文献
5.
In eastern Thailand the Klaeng fault zone includes a high-grade metamorphic rock assemblage, named Nong Yai Gneiss, which extends about 30 km in a NW–SE direction along the fault zone. The rocks of this brittle-fault strand consist of amphibolite to granulite grade gneissic rocks. Structural analysis indicates that the rocks in this area experienced three distinct episodes of deformation (D1–D3). The first (D1) formed large-scale NW–SE-trending isoclinal folds (F1) that were reworked by small-scale tight to open folds (F2) during the second deformation (D2). D1 and D2 resulted from NE–SW shortening during the Triassic Indosinian orogeny before being cross-cut by leucogranites. D1 and D2 fabrics were then reworked by D3 sinistral shearing, including shear planes (S3) and mineral stretching lineations (L3). LA–MC–ICP–MS U–Pb zircon dating suggested that the leucogranite intrusion and the magmatic crystallization took place at 78.6 ± 0.7 Ma followed by a second crystallization at 67 ± 1 to 72.1 ± 0.6 Ma. Both crystallizations occurred in the Late Cretaceous and, it is suggested, were tectonically influenced by SE Asian region effects of the West Burma and Shan-Thai/Sibumasu collision or development of an Andean-type margin. The sinistral ductile movement of D3 was coeval with the peak metamorphism that occurred in the Eocene during the early phases of the India–Asia collision. 相似文献
6.
The Himalayan Mianning–Dechang (MD) rare earth element (REE) belt in western Sichuan Province, southwestern China, is approximately 270 km long and 15 km wide, and contains total reserves of more than 3 Mt of light REEs (LREEs), comprising one giant (Maoniuping), one large (Dalucao), two small–medium-sized (Muluozhai and Lizhuang), and numerous smaller REE deposits. The belt occurs within the eastern Indo-Asian collision zone (EIACZ), where its location is controlled by large-scale strike-slip faults and tensional fissure zones. Himalayan carbonatite–syenite complexes consist predominantly of alkaline syenite stocks and carbonatite sills or dikes that host REE mineralization. Previous studies have reported inconsistent ages for alkaline magmatism syenite formation and REE mineralization. Here, we present new results of sensitive high-resolution ion micro-probe U–Pb dating of zircons from syenites from the Dalucao, Maoniuping, Lizhuang and Diaoloushan areas, the first systematic and precise age determinations for these rocks in the MD belt. The new data give concordant ages of 12.13 ± 0.19 and 11.32 ± 0.23 Ma for the Dalucao deposit, 22.81 ± 0.31 and 21.3 ± 0.4 Ma for Maoniuping, 26.77 ± 0.32 Ma for Muluozhai, and 27.41 ± 0.35 Ma for Lizhuang. These ages, which should be regarded as maximum ages for the REE mineralization in the study area, can be split into two groups, i.e. 11–12 Ma in the southern part of the MD belt and 12–27 Ma in the northern part, suggesting a progression of magmatism from north to south. These data suggest that the majority of carbonatite–syenite magmatism within the EIACZ occurred during the main stage of Himalayan metallogenesis. The ages presented in this study suggest that strike-slip shear along the MD belt was initiated at ca. 27 Ma and ended ca. 12 Ma. This timing is consistent with movements along the adjacent Ailaoshan–Red River strike-slip fault in southeastern Tibet (to the south of the MD belt) and one of the three Cenozoic strike-slip faults in eastern Tibet. Ascent of an asthenospheric mantle diapir beneath the EIACZ in the Cenozoic may have provided a thermal mechanism for the generation of magmas that formed the carbonatite–syenite complexes in the study area. Alternatitvely, the magmas may have been generated by decompression melting associated with the transition from a transpressional to a transtensional regime at 38–40 Ma. The precise age results for syenite magmatism in the study area indicate that this transition occurred prior to carbonatite–syenite magmatism and the formation of the MD REE belt, which is consistent with the regional tectonic model. 相似文献
7.
The Tan–Lu fault is a major strike-slip fault in eastern China that appears to offset the high-grade rocks of the Hong’an–Dabie–Sulu orogen left-laterally ∼540 km. We evaluate models for the collision between the South and North China blocks, published radiometric dates recording HP–UHP metamorphism and exhumation in the Hong’an–Dabie and Sulu terranes, and the timing of sinistral motion on the Tan–Lu fault to evaluate whether UHP rocks provide a piercing point for offset on the Tan–Lu fault. UHP metamorphism in Hong’an–Dabie was concurrent with Sulu based on U–Pb dating of coesite-bearing domains of zircon at 244 ± 5–226 ± 2 Ma for Hong’an–Dabie and 243 ± 4–225 ± 2 Ma for Sulu. Retrograde metamorphism began c. 220 Ma for both Hong’an–Dabie and Sulu, but retrograde zircon growth ended c. 214 Ma in Hong’an–Dabie and continued until c. 202 Ma in Sulu based on U–Pb dating of zircon domains external to coesite-bearing domains. Structures in Sulu are rotated 25° counter-clockwise from, but are broadly similar to, Hong’an–Dabie suggesting the two areas have a common Triassic orogenic history that pre-dates motion on the Tan–Lu fault, and that is consistent with paleomagnetic studies. We constructed a pre-Cretaceous restoration of the Hong’an–Dabie–Sulu belt that moves the Sulu terrane south, aligning the suture and the eclogite-facies isograd, and rotates Sulu c. 25° clockwise to re-align structures with Hong’an–Dabie. Our restoration is supported by published data and shows that the Hong’an–Dabie–Sulu orogen is a piercing point for post-collisional offset on the Tan–Lu fault and that these regions shared a common subduction–exhumation history. The Tan–Lu fault did not play a significant role in the Hong’an–Dabie–Sulu collision and likely developed later, in the Early Cretaceous. 相似文献
8.
The Paleozoic Pataz–Parcoy gold mining area is located in a right-stepping jog on the regional Cordillera Blanca fault, in northern Peru. Most of the 8 million ounces of gold production from this area has come from quartz–carbonate–sulfide veins hosted by the Pataz batholith. Despite a subduction zone setting since at least the Cambrian, the area records several periods of extension and its present structure is that of a rift and graben terrain. The Pataz district (the northern part of the Pataz–Parcoy area) is dominated structurally by northwest to north northwest-striking (NW–NNW) faults and northeast to east northeast-striking (NE–ENE) lineaments, both of which have been active periodically since at least the Mississippian (Early Carboniferous). NW–NNW faults control the margins of a central horst that exposes basement schist and the Pataz batholith, and step across NE–ENE lineaments. The Lavasen graben, to the east of the central horst, contains the Lavasen Volcanics, and the Chagual graben, to the west, contains an allochthonous sedimentary sequence derived from the Western Andean Cordillera.New SHRIMP zircon geochronological data indicate emplacement of the Pataz batholith during the Middle Mississippian, at around 338–336 Ma, approximately 10 Ma earlier than previous estimates based on 40Ar/39Ar geochronology. The calc-alkaline, I-type batholith comprises diorite and granodiorite, the latter being the major component of the batholith, and was emplaced as a sill complex within the moderately NE-dipping sequence of the Eastern Andean Cordillera. Moderate- to high-temperature ductile deformation took place on the batholith contacts during or shortly after emplacement. Following emplacement of the batholith, differential uplift occurred along NW–NNW faults forming the Lavasen graben, into which the Lavasen Volcanics were deposited. SHRIMP U–Pb in zircon ages for the Lavasen Volcanics and the Esperanza subvolcanic complex, which was intruded into the western margin of the graben, are within error of one another at ca 334 Ma. The ductile batholith contacts were cut by renewed movement on NW–NNW faults such that the margins of the batholith are now controlled by these steep brittle-ductile faults. The NW–NNW faults were oriented normal to the principal axis of regional shortening (ENE–WSW) during formation of the batholith-hosted, gold-bearing quartz–carbonate–sulfide veins. The misoriented faults were unable to accommodate significant displacement, leading to high fluid pressures, vertical extension in the competent batholith and formation of gold-bearing veins. Brittle failure of the batholith was most extensive in the northern Pataz district where the fault-controlled western contact of the batholith is offset by a swarm of NE–ENE lineaments.The timing of vein formation is not established, despite published 40Ar/39Ar ages of 312 to 314 Ma for metasomatic white mica, which are interpreted as minimum ages of formation. Gold-bearing veins formed during or shortly after uplift of the Pataz batholith and formation of the Lavasen graben; they were therefore broadly coeval with deposition of the Lavasen Volcanics and emplacement of the Esperanza subvolcanic complex. These K-rich, weakly alkalic, ferroan (A-type) magmas may provide a viable source for the ore fluid that deposited gold in the Pataz batholith. 相似文献
9.
《Journal of South American Earth Sciences》2009,27(4):397-411
The N–S oriented Coastal Cordillera of South Central Chile shows marked lithological contrasts along strike at ∼38°S. Here, the sinistral NW–SE-striking Lanalhue Fault Zone (nomen novum) juxtaposes Permo-Carboniferous magmatic arc granitoids and associated, frontally accreted metasediments (Eastern Series) in the northeast with a Late Carboniferous to Triassic basal-accretionary forearc wedge complex (Western Series) in the southwest. The fault is interpreted as an initially ductile deformation zone with divergent character, located in the eastern flank of the basally growing, upwarping, and exhuming Western Series. It was later transformed and reactivated as a semiductile to brittle sinistral transform fault. Rb–Sr data and fluid inclusion studies of late-stage fault-related mineralizations revealed Early Permian ages between 280 and 270 Ma for fault activity, with subsequent minor erosion. Regionally, crystallization of arc intrusives and related metamorphism occurred between ∼306 and ∼286 Ma, preceded by early increments of convergence-related deformation. Basal Western Series accretion started at >290 Ma and lasted to ∼250 Ma. North of the Lanalhue fault, Late Paleozoic magmatic arc granitoids are nearly 100 km closer to the present day Andean trench than further south. We hypothesize that this marked difference in paleo-forearc width is due to an Early Permian period of subduction erosion north of 38°S, contrasting with ongoing accretion further south, which kinematically triggered the evolution of the Lanalhue Fault Zone. Permo-Triassic margin segmentation was due to differential forearc accretion and denudation characteristics, and is now expressed in contrasting lithologies and metamorphic signatures in todays Andean forearc region north and south of the Lanalhue Fault Zone. 相似文献
10.
《Gondwana Research》2014,26(4):1469-1483
China's largest gold resource is located in the highly endowed northwestern part of the Jiaodong gold province. Most gold deposits in this area are associated with the NE- to NNE-trending shear zones on the margins of the 130–126 Ma Guojialing granite. These deposits collectively formed at ca. 120 ± 5 Ma during rapid uplift of the granite. The Dayingezhuang deposit is a large (> 120 t Au) orogenic gold deposit in the same area, but located along the eastern margin of the Late Jurassic Linglong Metamorphic Core Complex. New 40Ar/39Ar geochronology on hydrothermal sericite and muscovite from the Dayingezhuang deposit indicate the gold event is related to evolution of the core complex at 130 ± 4 Ma and is the earliest important gold event that is well-documented in the province. The Dayingezhuang deposit occurs along the Linglong detachment fault, which defines the eastern edge of the ca. 160–150 Ma Linglong granite–granodiorite massif. The anatectic rocks of the massif were rapidly uplifted, at rates of at least 1 km/m.y. from depths of 25–30 km, to form the metamorphic core complex. The detachment fault, with Precambrian metamorphic basement rocks in the hangingwall and the Linglong granitoids and migmatites in the footwall, is characterized by early mylonitization and a local brittle overprinting in the footwall. Gold is associated with quartz–sericite–pyrite–K-feldspar altered footwall cataclasites at the southernmost area of the brittle deformation along the detachment fault. Our results indicate that there were two successive, yet distinct gold-forming tectonic episodes in northwestern Jiaodong. One event first reactivated the detachment fault along the edge of the Linglong massif between 134 and 126 Ma, and then a second reactivated the shears along the margins of the Guojialing granite. Both events may relate to a component of northwest compression after a middle Early Cretaceous shift from regional NW–SE extension to a NE–SW extensional regime. 相似文献
11.
The eastern Coral Sea is a poorly explored area at the north-eastern corner of the Australian Tectonic Plate, where interaction between the Pacific and Australian plate boundaries, and accretion of the world's largest submarine plateau – the Ontong Java Plateau – has resulted in a complex assemblage of back-arc basins, island arcs, continental plateaus and volcanic products. This study combines new and existing magnetic anomaly profiles, seafloor fabric from swath bathymetry data, Ar–Ar dating of E-MORB basalts, palaeontological dating of carbonate sediments, and plate modelling from the eastern Coral Sea. Our results constrain commencement of the opening of the Santa Cruz Basin and South Rennell Trough to c. 48 Ma and termination at 25–28 Ma. Simultaneous opening of the Melanesian Basin/Solomon Sea further north suggests that a single > 2000 km long back-arc basin, with at least one triple junction existed landward of the Melanesian subduction zone from Eocene–Oligocene times. The cessation of spreading corresponds with a reorganisation of the plate boundaries in the area and the proposed initial soft collision of the Ontong Java Plateau. The correlation between back-arc basin cessation and a widespread plate reorganisation event suggests that back-arc basins may be used as markers for both local and global plate boundary changes. 相似文献
12.
The Cenozoic terrestrial, intermontane Qaidam Basin on the northeastern edge of the Tibetan Plateau contains > 12 km of sedimentary rocks that potentially document the accommodation of India-Asia convergence and the growth of the plateau. The chronology remains incomplete, hindering cross-basin correlation between lithostratigraphic units and their further interpretation. Here we present a high-resolution magnetostratigraphy spanning > 5 km of Paleogene-Neogene sequence at Dahonggou in the Northern Qaidam Basin. Based on correlation with the geomagnetic polarity time scale (GPTS), we have dated the section to being between ~ 52 and ~ 7 Ma. The bottom conglomeratic unit, ranging from > 52 Ma to ~ 44 Ma, was deposited in high-energy environments (e.g., alluvial fan or braided river), reflecting the earliest deformation and uplift of the basin-bounding Qilian Shan fold-thrust belt in response to India-Asia collision. In addition, we identified two major increases in sedimentation rate at 25–16 Ma and after ~ 9.5 Ma and three phases of lesser increases at 52–44 Ma, 38–33 Ma, and 14.6–12.0 Ma. These increases in sedimentation rate are consistent with regional thermochronology and basin analysis studies, which revealed enhanced motion on basin-bounding thrust faults. We argue that these accelerated sedimentation rates indicate pulsed tectonism in the northeastern Tibetan Plateau. The pulse at 25–16 Ma may further relate to phases of strong rainfall linked to an intense monsoon at that time. 相似文献
13.
A 2000 km long dextral Talas-Fergana strike–slip fault separates eastern terranes in the Kyrgyz Tien Shan from western terranes. The aim of this study was to constrain an age of dextral shearing in the central part of the fault utilizing Ar–Ar dating of micas. We also carried out a U–Pb–Hf zircon study of two different deformed granitoid complexes in the fault zone from which the micas for Ar dating were separated. Two samples of the oldest deformed Neoproterozoic granitoids in the area of study yielded U–Pb zircon SHRIMP ages 728 ± 11 Ma and 778 ± 11 Ma, characteristic for the Cryogenian Bolshoi Naryn Formation, and zircon grains analyzed for their Lu–Hf isotopic compositions yielded εHf(t) values from −11.43 to −16.73, and their calculated tHfc ages varied from 2.42 to 2.71 Ga. Thus varying Cryogenian ages and noticeable heterogeneity of Meso- to Paleoproterozoic crustal sources was established for mylonitic granites of the Bolshoi Naryn Formation. Two samples of mylonitized pegmatoidal granites of the Kyrgysh Complex yielded identical 206Pb/238U ages of 279 ± 5 Ma corresponding to the main peak of Late-Paleozoic post-collisional magmatism in the Tien Shan (Seltmann et al., 2011), and zircon grains analyzed for their Lu–Hf isotopic compositions yielded εHf(t) values from −11.43 to −16.73, and calculated tHfc ages from 2.42 to 2.71 Ga indicating derivation from a Paleoproterozoic crustal source. Microstructural studies showed that ductile/brittle deformation of pegmatoidal granites of the Kyrgysh Complex occurred at temperatures of 300–400 °C and caused resetting of the K–Ar isotope system of primary muscovite. Deformation of mylonitized granites of the Bolshoi Naryn Formation occurred under high temperature conditions and resulted in protracted growth and recrystallization of micas. The oldest Ar–Ar muscovite age of 241 Ma with a well defined plateau from a pegmatoidal granite of the Kyrgysh Complex is considered as a “minimum” age of dextral motions along this section of the fault in the Triassic while younger ages varying from 227 Ma to 199 Ma with typical staircase patterns indicate protracted growth and recrystallization of micas during ductile deformations which continued until the end of the Triassic. 相似文献
14.
《Russian Geology and Geophysics》2014,55(9):1043-1064
The paper summarizes data on the Pleistocene combustion metamorphic complexes of the Kuznetsk Coal Basin. Paralava and clinker samples are dated by 40Ar/39Ar incremental heating. The 40Ar/39Ar ages of the combustion metamorphic rocks permit reconstructions of the succession of renewed activity of ancient faults in the Salair zone and age estimates for the evolution of the present-day drainage network. Cross sections of burned rocks from the western margin and center of the Kuznetsk Basin are compared. The geologic factors of coal ignition risks are analyzed. On the western margin of the Kuznetsk Basin, paleofires occurred in steeply dipping thick seams with predominant crushed vitrain–clarain coal, which has a high oxygen and methane adsorption capacity. Highly denuded high-temperature combustion metamorphic complexes are most often localized in the arches of slightly broken anticlines. Oxygen was supplied to the coals during the Late Cenozoic renewed fault activity and the subsequent erosion of the sediments. The natural fires in the area were a result of external rather than spontaneous ignition. The depths of the paleofires (up to 200 m) indicate that they occurred in a warm and dry climate. In the center of the Kuznetsk Basin, dispersed fire foci appeared in seams of self-igniting coals with the erosion propagation of the current drainage network. The combustion metamorphic complexes here are partly eroded and consist mostly of clinkers with a low degree of alteration. The 40Ar/39Ar ages and geological data indicate that the earliest large-scale combustion events on the western periphery of the basin occurred in the Eopleistocene (1.3–0.9 Ma).The oldest 40Ar/39Ar age of a coal fire episode (1.7 ± 0.3 Ma) might be the upper age boundary of the altitude differentiation of topography, which corresponds to the renewed activity of the Tyrgan and Afonino–Kiselevsk faults. The later synchronous combustion events on the western margin (0.2 ± 0.1 Ma) and in the center of the basin (0.13–0.02 Ma), most probably, occurred during the Kazantsevian interglacial, which gave rise to the present-day drainage network. 相似文献
15.
《Journal of Structural Geology》2001,23(6-7):1031-1042
The Eastern Highlands shear zone in Cape Breton Island is a crustal scale thrust. It is characterized by an amphibolite-facies deformation zone ∼5 km wide formed deep in the crust that is overprinted by a greenschist-facies mylonite zone ∼1 km wide that formed at a more shallow level. Hornblende 40Ar/39Ar plateau ages on the hanging wall decrease towards the centre of the shear zone. In the older zone (over 7.8 km from the centre), the ages are between ∼565 and ∼545 Ma; in the younger zone (within 4.5 km of the centre), they are between ∼425 and ∼415 Ma; and in the transitional zone in between, they decrease abruptly from ∼545 to ∼425 Ma. Pressures of crystallization of plutons in the hanging wall, based on the Al-in-hornblende barometer and corresponding to depth of emplacement, increase towards the centre of the shear zone and indicate a differential uplift of up to ∼28 km associated with movement along the shear zone. The age pattern is interpreted to have resulted from the differential uplift. The pressure data show that rocks exposed in the younger zone were buried deep in the crust and did not cool through the hornblende Ar blocking temperature (∼500°C) until differential uplift occurred. The 40Ar/39Ar ages in the zone (∼425–415 Ma) thus date shear zone movement or the last stage of it. In contrast, rocks in the older zone were more shallowly buried before differential uplift and cooled through the blocking temperature soon after the emplacement of ∼565–555 Ma plutons in the area, long before shear zone movement. The transitional zone corresponds to the Ar partial retention zone before differential uplift. The 40Ar/39Ar age pattern thus reflects a Neoproterozoic to Silurian cooling profile that was exposed as a result of differential uplift related to movement along the shear zone. A similar K–Ar age pattern has been reported for the Alpine fault in New Zealand. It is suggested that such isotopic age patterns can be used to help constrain the ages, kinematics, displacements and depth of penetration of shear zones. 相似文献
16.
《Earth》2006,77(3-4):191-233
A Cenozoic tectonic reconstruction is presented for the Southwest Pacific region located east of Australia. The reconstruction is constrained by large geological and geophysical datasets and recalculated rotation parameters for Pacific–Australia and Lord Howe Rise–Pacific relative plate motion. The reconstruction is based on a conceptual tectonic model in which the large-scale structures of the region are manifestations of slab rollback and backarc extension processes. The current paradigm proclaims that the southwestern Pacific plate boundary was a west-dipping subduction boundary only since the Middle Eocene. The new reconstruction provides kinematic evidence that this configuration was already established in the Late Cretaceous and Early Paleogene. From ∼ 82 to ∼ 52 Ma, subduction was primarily accomplished by east and northeast-directed rollback of the Pacific slab, accommodating opening of the New Caledonia, South Loyalty, Coral Sea and Pocklington backarc basins and partly accommodating spreading in the Tasman Sea. The total amount of east-directed rollback of the Pacific slab that took place from ∼ 82 Ma to ∼ 52 Ma is estimated to be at least 1200 km. A large percentage of this rollback accommodated opening of the South Loyalty Basin, a north–south trending backarc basin. It is estimated from kinematic and geological constraints that the east–west width of the basin was at least ∼ 750 km. The South Loyalty and Pocklington backarc basins were subducted in the Eocene to earliest Miocene along the newly formed New Caledonia and Pocklington subduction zones. This culminated in southwestward and southward obduction of ophiolites in New Caledonia, Northland and New Guinea in the latest Eocene to earliest Miocene. It is suggested that the formation of these new subduction zones was triggered by a change in Pacific–Australia relative motion at ∼ 50 Ma. Two additional phases of eastward rollback of the Pacific slab followed, one during opening of the South Fiji Basin and Norfolk Basin in the Oligocene to Early Miocene (up to ∼ 650 km of rollback), and one during opening of the Lau Basin in the latest Miocene to Present (up to ∼ 400 km of rollback). Two new subduction zones formed in the Miocene, the south-dipping Trobriand subduction zone along which the Solomon Sea backarc Basin subducted and the north-dipping New Britain–San Cristobal–New Hebrides subduction zone, along which the Solomon Sea backarc Basin subducted in the west and the North Loyalty–South Fiji backarc Basin and remnants of the South Loyalty–Santa Cruz backarc Basin subducted in the east. Clockwise rollback of the New Hebrides section resulted in formation of the North Fiji Basin. The reconstruction provides explanations for the formation of new subduction zones and for the initiation and termination of opening of the marginal basins by either initiation of subduction of buoyant lithosphere, a change in plate kinematics or slab–mantle interaction. 相似文献
17.
An overview of the crustal structure of the Tibetan plateau after 35 years of deep seismic soundings
Zhongjie Zhang Yangfan Deng Jiwen Teng Chunyong Wang Rui Gao Yun Chen Weiming Fan 《Journal of Asian Earth Sciences》2011,40(4):977-989
Since the pioneer wide-angle seismic profile along the Yadong–Gulu rift acquired in 1974 by the ex-Institute of Geophysics, Chinese Academy of Sciences (CAS), several research programs aimed to deep geophysics, performed thanks to the participation of Chinese national and international institutions, have been developed during last 35 years, including 23 wide-angle seismic profiles with total length of about 6000 km. These profiles are unevenly distributed, most of them in eastern Tibet and few profiles in western Tibet. In this paper, we make a summarized presentation of all these wide-angle seismic profiles and provide an overall view of the seismic velocity structure of the crust beneath the broad Tibetan plateau, which is the product of the continuous convergence and collision of the Indian and Eurasian plates since about 50 Ma ago. Different patterns of crustal thickness variation related to the tectonic blocks and along suture zones of the region are displayed. The crust thickness is confirmed to be about 70–75 km under southern Tibet, and 60–65 km under northern, northeastern and southeastern Tibet. The leading edge of the subducted lithosphere reaches the northern margin of the plateau and directly contacts with Tarim Basin. Westward of the 90°E boundary, the Indian crust is moving towards the northern edge of the plateau and collides with Tarim Basin at 80°E while reach the Bangong–Nujiang suture belt at 88°E; eastward of the 90°E boundary, the northern edge of the crust should be at 50–100 km south of Bangong–Nujiang suture. The results supply helpful constrains to understand the mechanism of the continent–continent collision and its consequences in the plateau and neighbouring areas. 相似文献
18.
The catastrophic earthquakes that recently (September 4th, 2010 and February 22nd, 2011) hit Christchurch, New Zealand, show that active faults, capable of generating large-magnitude earthquakes, can be hidden beneath the Earth’s surface. In this article we combine near-surface paleoseismic data with deep (<5 km) onshore seismic-reflection lines to explore the growth of normal faults over short (<27 kyr) and long (>1 Ma) timescales in the Taranaki Rift, New Zealand. Our analysis shows that the integration of different timescale datasets provides a basis for identifying active faults not observed at the ground surface, estimating maximum fault-rupture lengths, inferring maximum short-term displacement rates and improving earthquake hazard assessment. We find that fault displacement rates become increasingly irregular (both faster and slower) on shorter timescales, leading to incomplete sampling of the active-fault population. Surface traces have been recognised for <50% of the active faults and along ≤50% of their lengths. The similarity of along-strike displacement profiles for short and long time intervals suggests that fault lengths and maximum single-event displacements have not changed over the last 3.6 Ma. Therefore, rate changes are likely to reflect temporal adjustments in earthquake recurrence intervals due to fault interactions and associated migration of earthquake activity within the rift. 相似文献
19.
The traditional concept of the rift development of flank depressions in the Baikal rift zone is now doubted in view of some indicators for compression deformations identified by the seismogeological and geodetic methods. Besides, the paleoseismological investigations revealed seismogenic strike-slips and reverse faults in the Tunka fault zone that is a major structure-controlling element of the Tunka rift depression. However, a detailed study of the upslope-facing scarp in the Arshan paleoseismogenic structure zone has shown that its formation might be due to rift mechanism of basin formation. Age estimation has been made for the previously unknown pre-historic earthquake whose epicentral area coincides with the western flank of the Arshan paleoseismogenic structure. Judging from previously determined ages of paleoearthquakes, the mean recurrence period for faulting events on the central Tunka fault is 2780–3440 years. 相似文献
20.
The Aswa Shear Zone (ASZ) is a fundamental Precambrian lithospheric structure that has been shaped by many tectonic events in eastern Africa. It separates the Saharan Metacraton in the northeast from the Northern Uganda terrane (which represents part of the Northeastern Congo block of the Congo craton) to the southwest. Nonetheless, its tectonic evolution is not fully understood. We used high-resolution airborne magnetic and radiometric data over Uganda integrated with Shuttle Radar Topography Mission (SRTM) Digital Elevation Model (DEM) in South Sudan to assess the extent, kinematics and contribute to the understanding of the tectonic origin of the ASZ. (1) Our results showed that the ASZ extends in a NW–SE direction for ~ 550 km in Uganda and South Sudan. (2) The airborne magnetic and radiometric data revealed a much wider (~ 50 km) deformation belt than the 5-10 km of the exposed surface expression of the ASZ. The deformation belt is defined by three NW-trending sinistral strike-slip shear zones bounding structural domains with magnetic fabric showing splays of secondary shear zones and shear-related folds. These folds are tighter close to the discrete shear zones with their axial traces becoming sub-parallel to the shear zones. A similar fold pattern is observed in South Sudan from the SRTM DEM. We interpreted these folds as due to ENE–WSW contraction associated with the sinistral strike-slip movement. (3) To the northeast, the magnetic patterns and radiometric signatures suggest the presence of a series of W-verging nappes indicative of strong E–W to NE–SW contraction deformation. (4) We relate the evolution of the ASZ to E–W to NE–SW Neoproterozoic oblique collision between East and West Gondwana. The deformation related to this collision was partitioned into E–W to NE–SW contraction resulting in W-verging thrusts in the east and a sinistral strike-slip movement along the NW-trending ASZ with the strain localized at the boundary between the Saharan Metacraton and the Northern Uganda terrane. 相似文献