首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Thrusting fault zone in foreland basins are characterized by highly foliated zones generally enriched in phyllosilicates which can play a major role on the mechanical behaviour of the fault. In this context, investigations of synkinematic clay minerals permit to determine the origin of the fluid from which they precipitated as well as the mechanisms of deformation. Our study is focused on clay mineral assemblages (illite and chlorite) in a major thrust fault located in the Monte Perdido massif (southern Pyrenees), a shallow thrust that affects upper cretaceous-paleocene platform carbonates and lower Eocene marls and turbidites. It implied 3?km of displacement of the Monte Perdido thrust unit with respect to the underlying Gavarnie unit. In this area the cleavage development by pressure-solution is linked to the Monte Perdido and Gavarnie thrust activity. The core zone of the fault, about 6?m thick, consists of an interval of intensely deformed clay-bearing rocks bounded by major shear surfaces. The deformed sediment is markedly darker than the protolith. Calcite-quartz shear veins along the shear planes are abundant. Detailed SEM and TEM observations of highly deformed fault zone samples indicate that clay mineral enrichment in the core zone of the fault is not only related to passive increase by pressure-solution mechanism but that dissolution?Crecrystallization of phyllosilicates occurs during deformation. A mineral segregation is observed in the highly deformed zone. Newly formed 2M 1 muscovite is present along the cleavage whereas IIb chlorite crystals fill SV2 shear veins suggesting syntectonic growth of phyllosilicates in the presence of fluids in low-grade metamorphic conditions. These mineralogical reactions act as weakening processes and would favour Monte Perdido fault creeping.  相似文献   

2.
Fault affecting silicoclastic sediments are commonly enriched in clay minerals. Clays are sensitive to fluid–rock interactions and deformation mechanisms; in this paper, they are used as proxy for fault activity and behavior. The present study focuses on clay mineral assemblages from the Point Vert normal fault zone located in the Annot sandstones, a Priabonian-Rupelian turbidite succession of the Alpine foredeep in SE France. In this area, the Annot sandstones were buried around 6–8 km below the front of Alpine nappes soon after their deposition and exhumed during the middle-late Miocene. The fault affects arkosic sandstone beds alternating with pelitic layers, and displays throw of about thirty meters. The fault core zone comprises intensely foliated sandstones bounding a corridor of gouge about 20 cm thick. The foliated sandstones display clay concentration along S–C structures characterized by dissolution of K-feldspar and their replacement by mica, associated with quartz pressure solution, intense microfracturation and quartz vein precipitation. The gouge is formed by a clayey matrix containing fragments of foliated sandstones and pelites. However, a detailed petrographical investigation suggests complex polyphase deformation processes. Optical and SEM observations show that the clay minerals fraction of all studied rocks (pelites and sandstones from the damage and core zones of the fault) is dominated by white micas and chlorite. These minerals have two different origins: detrital and newly-formed. Detrital micas are identified by their larger shape and their chemical composition with a lower Fe–Mg content than the newly-formed white micas. In the foliated sandstones, newly-formed white micas are concentrated along S–C structures or replace K-feldspar. Both types of newly formed micas display the same chemical composition confirmed microstructural observations suggesting that they formed in the same conditions. They have the following structural formulas: Na0.05 K0.86 (Al 1.77 Fe0.08 Mg0.15) (Si3.22 Al0.78) O10 (OH)2. They are enriched in Fe and Mg compared to the detrital micas. Newly-formed chlorites are associated with micas along the shear planes. According to microprobe analyses, they present the following structural formula: (Al1,48 Fe2,50 Mg1,84) (Si2,82 Al1,18) O10 (OH)8. All these data suggest that these clay minerals are synkinematic and registered the fault activity. In the gouge samples, illite and chlorite are the major clay minerals; smectite is locally present in some samples.In the foliated sandstones, Kubler Index (KI) ((001) XRD peak width at half height) data and thermodynamic calculations from synkinematic chlorite chemistry suggest that the main fault deformation occurred under temperatures around 220 °C (diagenesis to anchizone boundary). KI measured on pelites and sandstones from the hanging and footwall, display similar values coherent with the maximal burial temperature of the Annot sandstones in this area. The gouge samples have a higher KI index, which could be explained by a reactivation of the fault at lower temperatures during the exhumation of the Annot sandstones formation.  相似文献   

3.
The Oued Belif 48 and Koudiat El Halfa 5 borehole samples have been analysed in order to reveal the mineralogical composition of the Triassic successions and their burial history within the geological evolution of the Tethysian southern margin. Oued Belif 48 borehole belongs to Nefza district which is a part of the “Nappe zone” (Tellian unit, north-western Tunisia). Koudiat El Halfa 5 borehole crosses the Koudiat El Halfa diapir (north–west of the north–south axis, Central Atlas). In this paper, the burial degree of evaporitic Triassic samples was determined by the “illite crystallinity” index and by the evolution of the other phyllosilicates, essentially chlorite, talc and illite/chlorite and illite/smectite mixed layers. The studied samples of the two boreholes are characterized by the presence of abundant clay minerals. The <2-μm grain-size fraction of the samples is mostly composed of illite, chlorite and smectite and may contain a slight percentage of swelling layers (illite/smectite and illite/chlorite). The illite crystallinity value measured on ethylene glycol solvated oriented mounts of the Oued Belif 48 samples oscillates globally between 1 and 2.5 characterizing the epizonal zone with a range of 300–400 °C temperatures. The measures of Koudiat El Halfa 5 samples crystallinity index show a value ranging from 2 to 4, which indicates the anchizone and early epizone burial stage (temperatures around 200 °C). These data can be explained by Miocene magmatic activities characterizing the Triassic material of Nefza district and also by burial phenomena effects.  相似文献   

4.
Phyllosilicates occurring as replacements of olivine, clinopyroxene and interstitial materials and as veins or fracture-fillings in hydrothermally altered basalts from DSDP Hole 504B, Leg 83 have been studied using transmission and analytical electron microscopy. The parageneses of phyllosilicates generally change systematically with depth and with the degree of alteration, which in turn is related to permeability of basalts. Saponite and some mixed-layer chlorite/smectite are the dominant phyllosilicates at the top of the transition zone. Chlorite, corrensite, and mixed-layer chlorite/corrensite occur mainly in the lower transition zone and upper levels of the sheeted dike zone. Chlorite, talc, and mixed-layer talc/chlorite are the major phyllosilicates in the sheeted dike zone, although replacement of talc or ohvine by saponite is observed. The phyllosilicates consist of parallel or subparallel discrete packets of coherent layers with packet thicknesses generally ranging from< 100 Å to a few hundred Å. The packets of saponite layers are much smaller or less well defined than those of chlorite, corrensite and talc, indicating poorer crystal-linity of saponite. by contrast, chlorite and talc from the lower transition zone and the sheeted dike zone occur in packets up to thousands of Å thick. The Si/(Si+Al) ratio of these trioctahedral phyllosilicates increases and Fe/(Fe+Mg) decreases in the order chlorite, corrensite, saponite, and talc. These relations reflect optimal solid solution consistent with minimum misfit of articulated octahedral and tetrahedral sheets. Variations in composition of hydrothermal fluids and precursor minerals, especially in Si/(Si+Al) and Fe/(Fe+Mg) ratios, are thus important factors in controlling the parageneses of phyllosilicates. The phyllosilicates are generally well crystallized discrete phases, rather than mixed-layered phases, where they have been affected by relatively high fluid/rock ratios as in high-permeability basalts, in veins, or areas adjacent to veins. Intense alteration in basalts with high permeability (indicating high fluid/rock ratios) is characterized by pervasive albitization and zeolitization. Minimal alteration in the basalts without significant albitization and zeolitization is characterized by the occurrence of saponite±mixed-layer chlorite/smectite in the low-temperature alteration zone, and mixed-layer chlorite/corrensite or mixed-layer talc/chlorite in the high-temperature alteration zone. Textural non-equilibrium for phyllosilicates is represented by mixed layering and poorly defined packets of partially incoherent layers. The approach to textural equilibrium was controlled largely by the availability of fluid or permeability.Contribution No. 488 from the Mineralogical Laboratory, Department of Geological Sciences, The University of Michigan  相似文献   

5.
The >200 km long Moonlight Fault Zone (MFZ) in southern New Zealand was an Oligocene basin-bounding normal fault zone that reactivated in the Miocene as a high-angle reverse fault (present dip angle 65°–75°). Regional exhumation in the last c. 5 Ma has resulted in deep exposures of the MFZ that present an opportunity to study the structure and deformation processes that were active in a basin-scale reverse fault at basement depths. Syn-rift sediments are preserved only as thin fault-bound slivers. The hanging wall and footwall of the MFZ are mainly greenschist facies quartzofeldspathic schists that have a steeply-dipping (55°–75°) foliation subparallel to the main fault trace. In more fissile lithologies (e.g. greyschists), hanging-wall deformation occurred by the development of foliation-parallel breccia layers up to a few centimetres thick. Greyschists in the footwall deformed mainly by folding and formation of tabular, foliation-parallel breccias up to 1 m wide. Where the hanging-wall contains more competent lithologies (e.g. greenschist facies metabasite) it is laced with networks of pseudotachylyte that formed parallel to the host rock foliation in a damage zone extending up to 500 m from the main fault trace. The fault core contains an up to 20 m thick sequence of breccias, cataclasites and foliated cataclasites preserving evidence for the progressive development of interconnected networks of (partly authigenic) chlorite and muscovite. Deformation in the fault core occurred by cataclasis of quartz and albite, frictional sliding of chlorite and muscovite grains, and dissolution-precipitation. Combined with published friction and permeability data, our observations suggest that: 1) host rock lithology and anisotropy were the primary controls on the structure of the MFZ at basement depths and 2) high-angle reverse slip was facilitated by the low frictional strength of fault core materials. Restriction of pseudotachylyte networks to the hanging-wall of the MFZ further suggests that the wide, phyllosilicate-rich fault core acted as an efficient hydrological barrier, resulting in a relatively hydrous footwall and fault core but a relatively dry hanging-wall.  相似文献   

6.
Fault zone architecture plays an important role in flow regimes of hydrological systems. Fault zones can act as conduits, barriers, or conduits/barrier systems depending on their spatial architecture. The goal of this study is to determine the fault-zone permeability structure and its effect on the local hydrogeological system in the Dead Sea fault system. Permeability was measured on small-scale outcrop plug samples at four faults along the Dead Sea fault system, and large-scale slug tests in four boreholes, in different parts of the fault, at Yair fault in Israel. The research results show that values in the damage zone are two to five orders of magnitude higher than those of the fault core (~3.5?×?10?10, 1?×?10?15 m2 respectively), resulting in an anisotropic permeability structure for the overall fault zone and preferable flow parallel to the fault. A set of injection tests in the Yair fault damage zone revealed a water-pressure-dependent behavior. The permeability of this zone increases when employing a higher water pressure in the fault fracture-dominated damage zone, due to the reopening of fractures.  相似文献   

7.
The interplay between fault zone cataclasis and cementation is important since both processes can drastically reduce the permeability of faults in porous sandstones. Yet the prediction of fault cementation in high-porosity sandstone reservoirs remains elusive. Nevertheless, this process has rarely been investigated in shallowly buried faults (<2 km; T°<80 °C) where its sealing capacity could be acquired early in the geological history of a reservoir. In this paper, the macro- and microscopic analysis of a fault zone in the porous Cenomanian quartz arenite sands of Provence (France) shows that silica diagenesis occurs in the most intensely-deformed cataclastic parts of the fault zone. This fault zone shows 19–48% of its total thickness occupied by low-porosity quartz-cemented cataclastic shear bands whose porosities range from 0 – ca. 5%. The analysis of the weathering profile around the fault zone reveals the presence of groundwater silcretes in the form of tabular, tightly silicified concretions cross-cut by the fault. Detailed transmitted light, cold-cathodoluminescence and scanning electron microscopy analyses of the silica cements (from the fault and the silcrete) reveal that all the silica cements originate from groundwater diagenetic processes. This study therefore shows that silica cementation can occur specifically in fault zones and as groundwater silcrete in the shallow context of a groundwater system, generated at the vicinity of an erosional unconformity.  相似文献   

8.
塔里木盆地走滑带碳酸盐岩断裂相特征及其与油气关系   总被引：2，自引：0，他引：2  
通过露头与井下资料的综合分析,塔里木盆地奥陶系碳酸盐岩走滑断裂带断裂相具有多样性,根据内部构造发育程度可以分为断层核发育、断层核欠发育两类。露头走滑带断层核部以裂缝带、透镜体、滑动面等断裂相发育为特征,断裂边缘的破碎带发育裂缝带、变形带。裂缝带主要分布在断层核附近50m的破碎带内,裂缝多开启,渗流性好。断裂核部透镜体发育,在破碎带也有分布,破碎角砾组合的透镜体多致密。滑动面具有平直截切型、渐变条带型等两种类型,多为开启的半充填活动面。变形带多为方解石与碎裂岩充填,破碎带局部部位裂缝与溶蚀作用较发育。利用地震剖面、构造图、相干图等资料可以判识塔里木盆地内部奥陶系碳酸盐岩走滑断裂相的特征及其发育程度,沿走滑断裂带走向上断裂相具有分段性与差异性,根据渗流性可以定性区分高渗透相、致密相区。沿断裂带高渗透相区是碳酸盐岩缝洞体储层发育的有利部位。断裂相的横向变化造成油气分布的区段性,形成高渗透相输导模式、致密相遮挡模式等两类成藏模式。走滑断裂带碳酸盐岩断裂相的特征及其控藏作用对油气勘探开发储层建模具有重要意义。  相似文献   

9.
The relationship between diagenetic chlorite rims and depositional facies in deltaic strata of the Lower Cretaceous Missisauga Formation was investigated using a combination of electron microprobe, bulk geochemistry and X‐ray diffraction data. The succession studied comprises several stacked parasequences. The delta progradational facies association includes: (i) fluvial or distributary channel sandstones (some with tidal influence); (ii) thick‐bedded delta‐front graded beds of sandstone interpreted as resulting from fluvial hyperpycnal flow during floods and storms; and (iii) more distal muddier delta‐front and prodeltaic facies. The transgressive facies association includes lag conglomerate, siderite‐cemented muddy sandstone and mudstone, and bioclastic sandy limestone. Chlorite rims are absent in the fluvial facies and best developed in thick sandstones lacking mudstone baffles. Good quality chlorite rims are well correlated with Ti in bulk geochemistry. Ti is a proxy for Fe availability, principally from the breakdown of abundant detrital ilmenite (FeTiO3). Under conditions of sea floor diagenesis, the abrupt decrease in sedimentation rate at transgressive surfaces caused progressive shallowing of the sulphate‐depletion level and of the overlying Eh‐controlled diagenetic zones, resulting in conditions suitable for diagenetic formation of berthierine to migrate upwards through the packet of reservoir sandstones. This early diagenetic berthierine suppressed silica cementation and later recrystallized to chlorite. Thick euhedral outer chlorite rims were precipitated from formation water in sandstone lacking muddy baffles on this chlorite substrate and inhibited late carbonate cementation. This study thus shows that the preservation of porosity by chlorite rims is a two‐stage process. Rapidly deposited delta‐front turbidite facies create early diagenetic conditions that eventually lead to the formation of chlorite rims, but the best quality chlorite rims are restricted to sandstones with high permeability during burial diagenesis.  相似文献   

10.
The chemical and isotopic compositions of clay minerals such as illite and chlorite are commonly used to quantify diagenetic and low-grade metamorphic conditions, an approach that is also used in the present study of the Monte Perdido thrust fault from the South Pyrenean fold-and-thrust belt. The Monte Perdido thrust fault is a shallow thrust juxtaposing upper Cretaceous–Paleocene platform carbonates and Lower Eocene marls and turbidites from the Jaca basin. The core zone of the fault, about 6 m thick, consists of intensely deformed clay-bearing rocks bounded by major shear surfaces. Illite and chlorite are the main hydrous minerals in the fault zone. Illite is oriented along cleavage planes while chlorite formed along shear veins (<50 μm in thickness). Authigenic chlorite provides essential information about the origin of fluids and their temperature. δ18O and δD values of newly formed chlorite support equilibration with sedimentary interstitial water, directly derived from the local hanging wall and footwall during deformation. Given the absence of large-scale fluid flow, the mineralization observed in the thrust faults records the P–T conditions of thrust activity. Temperatures of chlorite formation of about 240°C are obtained via two independent methods: chlorite compositional thermometers and oxygen isotope fractionation between cogenetic chlorite and quartz. Burial depth conditions of 7 km are determined for the Monte Perdido thrust reactivation, coupling calculated temperature and fluid inclusion isochores. The present study demonstrates that both isotopic and thermodynamic methods applied to clay minerals formed in thrust fault are useful to help constrain diagenetic and low-grade metamorphic conditions.  相似文献   

11.
The source material, precursor and formation processes of chlorite rims, and impact of pore-lining chlorite on reservoir quality of the Shiqianfeng sandstones, Dongpu Depression, Bohai Bay Basin, China, are studied using an integrated approach, including core observation, point-count analysis of thin-sections, scanning electron microscopy, electron microprobe analysis and cathode luminescence. The petrographic analysis shows that chlorite rims consist of grain-coating chlorite, poorly crystalline pore-lining chlorite and euhedral-crystallised pore-lining chlorite. The chemical composition shows that pore-lining chlorite is mainly Fe-rich with an average of 0.785 for Fe/(Fe+Mg) ratio. Petrographic analysis shows a large amount of volcanic dust (3.0～16.0 vol%, average of 7.93 vol%) in Shiqianfeng sandstones, which determines the formation of poorly crystalline pore-lining chlorite. Transformation of volcanic dust to smectite rims started with shallow burial depth at an early diagenetic stage, followed by in situ alteration of the smectite rims to poorly crystalline chlorite rims. Euhedral-crystallised chlorite mainly develops in sandstones with high porosity, high permeability and open flow systems. Pore-lining chlorite can inhibit quartz overgrowth but cannot effectively prevent pore-filling of authigenic quartz, carbonate and kaolinite cements, and therefore cannot prevent porosity destruction. However, the occurrence of pore-lining chlorite is a barometer of good reservoir quality and intense hydrodynamic conditions.  相似文献   

12.
The Liaonan metamorphic core complex (mcc) has a three-layer structure and is constituted by five parts, i.e. a detachment fault zone, an allochthonous upper plate and an supradetachment basin above the fault zone, and highly metamorphosed rocks and intrusive rocks in the lower plate. The allochthonous upper plate is mainly of Neoproterozoic and Paleozoic rocks weakly deformed and metamorphosed in pre-Indosinan stage. Above these rocks is a small-scale supradetachment basin of Cretaceous sedimentary and volcanic rocks. The lower plate is dominated by Archean TTG gneisses with minor amount of supracrustal rocks. The Archean rocks are intruded by late Mesozoic synkinematic monzogranitic and granitic plutons. Different types of fault rocks, providing clues to the evolution of the detachment fault zone, are well-preserved in the fault zone, e.g. mylonitic gneiss, mylonites, brecciated mylonites, microbreccias and pseudotachylites. Lineations in lower plate granitic intrusions have consistent orientation that indicate uniform top-to-NW shearing along the main detachment fault zone. This also provides evidence for the synkinematic characteristics of the granitic plutons in the lower plate. Structural analysis of the different parts in the mcc and isotopic dating of plutonic rocks from the lower plate and mylonitic rocks from detachment fault zone suggest that exhumation of the mcc started with regional crustal extension due to crustal block rotation and tangential shearing. The extension triggered magma formation, upwelling and emplacement. This event ended with appearance of pseudotachylite and fault gauges formed at the uppermost crustal level. U-Pb dating of single zircon grains from granitic rocks in the lower plate gives an age of 130±5 Ma, and biotite grains from the mam detachment fault zone have 40Ar-39Ar ages of 108-119 Ma. Several aspects may provide constraints for the exhumation of the Liaonan mcc. These include regional extensional setting, cover/basement contact, temporal and spatial coupling of extension and magmatism, basin development and evolution of fault tectonites along detachment fault zone. We propose that the exhumation of the Liaonan mcc resulted from regional extension and thinning of crust or lithosphere in eastern North China, and accompanied with synkinematic intrusion of granitic plutons, formation of detachment fault zone, uplifting and exhumation of lower-plate rocks, and appearance of supradetachment basin.  相似文献   

13.
There is little visible primary hydrodynamic lamination preserved in the Bridport-Yeovil Sands as a result of intense bioturbation. Where lamination is present, it exhibits wave-produced characteristics, although current ripple lamination is also found. The grain orientation of a variety of bioturbated and non-bioturbated fine-grained sandstones has been determined by measuring the magnetic susceptibility anisotropy. The magnetic fabric is of a primary style and preserves two lineation directions approximately 90° apart in azimuth. These lineation directions are interpreted as the result of grain long-axis orientations produced by wave and current processes. The magnetic fabric is dominantly carried by a small proportion of paramagnetic minerals, thought to be largely detrital chlorite and micas. This magnetic fabric has been acquired by depositional alignment of the detrital phyllosilicates and by reorientation of the phyllosilicates during the early stages of compaction. The magnetic fabric of the intensely bioturbated sandstone is not significantly different in magnitude characteristics or in the preservation of lineation directions from that of the non-bioturbated sandstone.  相似文献   

14.
Burial Metamorphism of the Ordos Basin in Northern Shaanxi   总被引：1，自引：0，他引：1  
Burial metamorphism has been found in the Ordos basin of northern Shaanxi. On the basis of a rather intensive study of burial metamorphism of sandstone, it has been shown that the evolution from diagenesis to metamorphism involves four stages: cementation of clay minerals, regrowth of pressolved quartz and feldspar, cementation of carbonates and formation of laumontite. On that basis it has been put forward that the laumontite is formed by burial metamorphism of clay and carbonate minerals. According to the thermodynamic data of minerals, the conditions under which laumontite is formed are T<250℃ and X_(CO_2)<0.17. High-resolution SEM and TEM studies of clay minerals in mudstone show that there occur a mixed layer assemblage of bertherine and illite/chlorite and transformation from bertherine to chlorite. On that basis coupled by the X-ray diffraction analysis the author suggests the following transformation of clay minerals during burial metamorphism: the earliest smectite-kaolinite assemblage changes into the bertherine-illite mixture with increasing depth, then into the illite/chlorite mixed layer assemblage and finally into dispersed individual illite and chlorite. The reaction of the transformation is:smectite+kaolinite+K~+=illite+chlorite+quartz According to the study of the oxygen isotope thermometry of the coexisting illitequartz pair, the temperature of the above transformation is lower than 180℃.  相似文献   

15.
  相似文献   

16.
The Kanmon Group (Lower Cretaceous) is a non-marine sequence in the Inner Zone of southwest Japan and is divided into the lower Wakino (lacustrine) and the upper Shimonoseki (fluvial) subgroups. Major diagenetic changes in this group are compaction, iron-oxide cementation, calcite cementation and grain replacement, quartz overgrowth and pore-fill cementation, illite authigenesis, chlorite pore-fill cementation and grain replacement, albitization of feldspar, and grain replacement by pyrite. Two subgroups of the Kanmon Group present no significant differences in general diagenetic features, paragenetic sequence, or the degree of diagenetic changes despite differences in depositional environments (lacustrine vs. fluvial) and stratigraphic positions. However, some differences are recognized in the content and chemistry of authigenic minerals caused by different sandstone framework compositions. The content of authigenic clay minerals is higher in sandstones of the Shimonoseki Subgroup containing abundant volcanic rock fragments. In addition, the composition of chlorite, the most abundant authigenic clay mineral in Kanmon sandstones, is Mg-rich in the volcanoclastic Shimonoseki sandstones, compared to an Fe-rich variety in Wakino sandstones. The original sandstone composition played a significant role in pore-water composition and diagenetic reactions.The Wakino sandstones lost most of its porosity by compaction, whereas Shimonoseki sandstones are only compacted in the vicinity of the basin-bounding fault. The weakly compacted Shimonoseki sandstones, instead, were largely cemented by pore-filling calcite during early diagenesis; cementation prevented compaction during further burial. The Kanmon Group sediments were heated to about 300 °C based on illite crystallinity values.  相似文献   

17.
《Sedimentary Geology》1999,123(1-2):129-146
The succession of sandstone cements in chert and volcanic lithic arenites and wackes from the northern Bowser Basin of British Columbia comprises a record of diagenesis in shallow marine, deltaic, and coastal plain siliciclastic sediments that pass through the oil window and reach temperatures near the onset of metamorphism. The succession of cements is consistent with seawater in the sandstones mixing with acid waters derived from dewatering of interbedded organic rich muds. Sandstone cement paragenesis includes seven discrete cement stages. From earliest to latest the cement stages are: (1) pore-lining chlorite; (2) pore-lining to pore-filling illite; (3) pore-filling kaolinite; (4) oil migration through some of the remaining connected pores; (5) chlorite dissolution; (6) quartz cement; and (7) calcite cement. These seven cement stages are interpreted as a record of the evolution of pore waters circulating through the sandstones after burial. The earliest cement stages, as well as the depositional environments, are compatible with seawater as the initial pore fluid. Seawater composition changed during transport through the sandstones, first by loss of Mg2+ and Fe2+ during chlorite precipitation (stage 1). Dewatering of interbedded organic-rich mudstones probably added Mg2+ and Fe2+ to partially buffer the loss of these cations to chlorite. Acids produced during breakdown of organic matter are presumed to have mixed into sandstone pore fluids due to further compaction of the muds, leading to reduction of initial alkalinity. Reduction in alkalinity, in turn, favours change from chlorite to illite precipitation (stage 2), and finally to kaolinite (stage 3). Pore waters likely reached their peak acidity at the time of oil migration (stage 4). Chlorite dissolution (stage 5) and quartz precipitation (stage 6) occurred when pores were filled by these hydrocarbon-bearing and presumably acidic fluids. Fluid inclusions in fracture-filling quartz cements contain petroleum, high-pressure methane, and methane-rich aqueous solutions. Homogenization temperatures from primary two-phase inclusions are consistent with quartz cementation during progressive heating between approximately 100 and 200°C. Following quartz precipitation, alkaline pore waters were re-established, as evidenced by late-stage calcite cement (stage 7).  相似文献   

18.
张性断裂带内部结构特征及油气运移和保存研究   总被引：1，自引：0，他引：1       下载免费PDF全文
断裂带是一个宽度、长度和高度均与断距呈正比关系的三维地质体,具有典型的二分结构：即断层核和破碎带。断层核由多种类型的断层岩和后期胶结物组成,具有分选差,粘土含量高,颗粒粒径小等特征,表现为具有比围岩更低的孔渗性。破碎带同围岩相比发育大量的裂缝,裂缝的密度随着离断层核距离的增大而逐渐减小,孔渗性较高。断层岩类型取决于断移地层的岩性、成岩程度和断裂变形时期。对于同生断层而言,泥岩和不纯净的砂岩主要发生泥岩涂抹作用;纯净砂岩发生解聚作用,形成颗粒重排的变形带。中成岩阶段发生断裂变形,泥岩发生泥岩涂抹作用,不纯净的砂岩发生碎裂作用和层状硅酸盐涂抹作用,形成碎裂岩和层状硅酸盐 框架断层岩;纯净砂岩主要发生碎裂作用,形成碎裂岩。晚成岩阶段发生断裂变形,碎裂作用成为主要的变形机制,泥岩破碎形成大量断层泥,不纯净的砂岩和纯净的砂岩均形成碎裂岩,其中纯净砂岩形成的碎裂岩由于石英的压溶胶结变得更致密。因此不同成岩阶段、不同岩性形成的断层岩类型不同,泥岩涂抹的排替压力高于层状硅酸盐 框架断层岩和碎裂岩,即使都是碎裂岩,其渗透率相差7个数量级。从断裂带结构看油气运移和保存,断层垂向封闭主要靠剪切型泥岩涂抹的连续性,侧向封闭能力取决于断层岩物性,物性很高的碎裂岩自身封闭能力很差,依靠两盘岩性对接封闭油气,最小断距决定油水界面位置。物性很低的断层岩一般能封住一定高度的油气柱,其是断裂带中泥质含量的函数。断层在储盖层段变形机制差异,决定了断裂输导与封闭油气的耦合,即破碎带双向输导充注,盖层段剪切型泥岩涂抹顶部封闭,断层核遮挡成藏。  相似文献   

19.
Abstract An inverted metamorphic gradient associated with the northern mylonite zone of the Cheyenne belt, a deeply eroded Precambrian suture in southern Wyoming, has been documented within metasedimentary rocks of the Early Proterozoic Snowy Pass Supergroup. Metamorphic grade in the steeply dipping supracrustal sequence increases from the chlorite through the biotite, garnet, and staurolite zones both stratigraphically and structurally upward toward the northern mylonite zone. A minimum temperature increase of approximately 100° C over a km-wide zone is required for this transition. Parallelism of inverted isograds with the trace of the northern mylonite zone implies a genetic relationship between deformation associated with that zone and the inverted metamorphic gradient within the Snowy Pass Supergroup. Field evidence together with microstructural and petrofabric analysis indicate northward thrusting of amphibolite-grade rocks over rocks of the Snowy Pass Supergroup along the northern mylonite zone. Mineral equilibria and garnet-biotite geothermometry on synkinematic mineral assemblages within the Snowy Pass metasedimentary rocks indicate deformation at minimum temperatures of 480° C and pressures of 350–400 MPa (3°5–4°0 kbar). This implies tectonic burial or upper plate thickness of 13–15 km. The narrow character of metamorphic zonation and microtextures within the Snowy Pass Supergroup which indicate late synkine-matic growth of garnet and staurolite, preclude rotation of pre-existing isograds by folding as a mechanism for development of the inverted gradient. Conductive transport of heat from the upper into the lower plate across the originally low-angle thrust is insufficient to produce the necessary temperatures in the lower plate. Shear heating is considered insufficient to produce the observed metamorphic transition unless high shear stresses are postulated. Up-dip advection of metamorphic fluids is a feasible, but unproven, mechanism for heat transport. The possibility that rapid uplift due to stacking of several thrust sheets may have played a role in preserving the inverted metamorphic gradient cannot be evaluated at present.  相似文献   

20.
Alpine deformation in the Grimsel granodiorite (Aar massif, Central Alps) at greenschist facies conditions (6.5 ± 1 kbar for 450°C ± 25°C) is characterized by the development of a network of centimetre to decametre localized shear zones that surround lenses of undeformed granodiorite. Localization of deformation is assumed to be the result of a first stage of extreme localization on brittle precursors (nucleation stage) followed by a transition to ductile deformation and lateral propagation into the weakly deformed granodiorite (widening stage). A paradox of this model is that the development of the ductile shear zone is accompanied by the crystallization of large amounts of phyllosilicates (white mica and chlorite) that maintains a weak rheology in the localized shear zone relative to the host rock so that deformation is localized and prevents shear zone widening. We suggest that chemical processes, and more particularly, the metamorphic reactions and metasomatism occurring during re‐equilibration of the metastable magmatic assemblage induced shear zone widening at these P–T–X conditions. These processes (reactions and mass transfer) were driven by the chemical potential gradients that developed between the thermodynamically metastable magmatic assemblage at the edge of the shear zone and the stable white mica and chlorite rich ultramylonite formed during the first stage of shear zone due to localized fluid infiltration metasomatism. P–T and chemical potential projections and sections show that the process of equilibration of the wall rocks (μ–μ path) occurs via the reactions: kf + cz + ab + bio + MgO + H2O = mu + q + CaO + Na2O and cz + ab + bio + MgO + H2O = chl + mu + q + CaO + Na2O. Computed phase diagram and mass balance calculations predict that these reactions induce relative losses of CaO and Na2O of ～100% and ～40% respectively, coupled with hydration and a gain of ～140% for MgO. Intermediate rocks within the strain gradient (ultramylonite, mylonite and orthogneiss) reflect various degrees of re‐equilibration and metasomatism. The softening reaction involved may have reduced the strength at the edge of the shear zone and therefore promoted shear zone widening. Chemical potential phase diagram sections also indicate that the re‐equilibration process has a strong influence on equilibrium mineral compositions. For instance, the decrease in Si‐content of phengite from 3.29 to 3.14 p.f.u, when white mica is in equilibrium with the chlorite‐bearing assemblage, may be misinterpreted as the result of decompression during shear zone development while it is due only to syn‐deformation metasomatism at the peak metamorphic condition. The results of this study suggest that it is critical to consider chemical processes in the formation of shear zones particularly when deformation affects metastable assemblages and mass transfer are involved.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号