共查询到20条相似文献，搜索用时 578 毫秒
1.
Remediation of piled foundations against lateral spreading by passive site stabilization technique 总被引：2，自引：0，他引：2
Ahmet Pamuk Patricia M. Gallagher Thomas F. Zimmie 《Soil Dynamics and Earthquake Engineering》2007,27(9):864-874
Physical modeling tests were conducted on pile foundations to measure the seismic performance of a new ground improvement technology, called passive site stabilization, for use on sites susceptible to liquefaction and liquefaction-induced lateral spreading. The method involves the slow injection of a low-viscosity stabilizer in conjunction with the natural groundwater flow. The effectiveness of the treatment using dilute colloidal silica as the stabilizer was tested by two centrifuge models that simulated soil–pile interaction of a 2×2 end-bearing pile group embedded in a multilayer soil deposit of 10-m thickness. The models utilized a laminar box and involved gently inclined soil profiles with and without the applied soil improvement. Response of the pile groups and the lateral spreading behaviors of the treated and untreated soil under a simulated base shaking were investigated and compared. The results showed that treatment with dilute colloidal silica stabilizer minimized permanent lateral deformations and reduced the liquefaction potential of the soil. Significant reductions occurred in the measured pile bending moments and axial forces because the layer treated with dilute colloidal silica did not liquefy. Thus, the technique can be an alternative to traditional methods of ground improvement. 相似文献
2.
The seismic response of pile foundations is a very complex process involving inertial interaction between structure and pile foundation, kinematic interaction between piles and soils, seismically induced pore-water pressures (PWP) and the non-linear response of soils to strong earthquake motions. In contrast, very simple pseudo-static methods are used in engineering practice to determine response parameters for design. These methods neglect several of the factors cited above that can strongly affect pile response. Also soil–pile interaction is modelled using either linear or non-linear springs in a Winkler computational model for pile response. The reliability of this constitutive model has been questioned. In the case of pile groups, the Winkler model for analysis of a single pile is adjusted in various ways by empirical factors to yield a computational model for group response. Can the results of such a simplified analysis be adequate for design in all situations?The lecture will present a critical evaluation of general engineering practice for estimating the response of pile foundations in liquefiable and non-liquefiable soils during earthquakes. The evaluation is part of a major research study on the seismic design of pile foundations sponsored by a Japanese construction company with interests in performance based design and the seismic response of piles in reclaimed land. The evaluation of practice is based on results from field tests, centrifuge tests on model piles and comprehensive non-linear dynamic analyses of pile foundations consisting of both single piles and pile groups. Studies of particular aspects of pile–soil interaction were made. Piles in layered liquefiable soils were analysed in detail as case histories show that these conditions increase the seismic demand on pile foundations. These studies demonstrate the importance of kinematic interaction, usually neglected in simple pseudo-static methods. Recent developments in designing piles to resist lateral spreading of the ground after liquefaction are presented. A comprehensive study of the evaluation of pile cap stiffness coefficients was undertaken and a reliable method of selecting the single value stiffnesses demanded by mainstream commercial structural software was developed. Some other important findings from the study are: the relative effects of inertial and kinematic interactions between foundation and soil on acceleration and displacement spectra of the super-structure; a method for estimating whether inertial interaction is likely to be important or not in a given situation and so when a structure may be treated as a fixed based structure for estimating inertial loads; the occurrence of large kinematic moments when a liquefied layer or naturally occurring soft layer is sandwiched between two hard layers; and the role of rotational stiffness in controlling pile head displacements, especially in liquefiable soils. The lecture concludes with some recommendations for practice that recognize that design, especially preliminary design, will always be based on simplified procedures. 相似文献
3.
Bridges are a part of vital infrastructure,which should operate even after a disaster to keep emergency services running.There have been numerous bridge failures during major past earthquakes due to liquefaction.Among other categories of failures,mid span collapse(without the failure of abutments)of pile supported bridges founded in liquefiable deposits are still observed even in most recent earthquakes.This mechanism of collapse is attributed to the effects related to the differential elongation of natural period of the individual piers during liquefaction.A shake table investigation has been carried out in this study to verify mechanisms behind midspan collapse of pile supported bridges in liquefiable deposits.In this investigation,a typical pile supported bridge is scaled down,and its foundations pass through the liquefiable loose sandy soil and rest in a dense gravel layer.White noise motions of increasing acceleration magnitude have been applied to initiate progressive liquefaction and to characterize the dynamic features of the bridge.It has been found that as the liquefaction of the soil sets in,the natural frequency of individual bridge support is reduced,with the highest reduction occurring near the central spans.As a result,there is differential lateral displacement and bending moment demand on the piles.It has also been observed that for the central pile,the maximum bending moment in the pile will occur at a higher elevation,as compared to that of the interface of soils of varied stiffness,unlike the abutment piles.The practical implications of this research are also highlighted. 相似文献
4.
Soil liquefaction induced by earthquakes frequently cause costly damage to pile foundations. However, various aspects of the dynamic behavior and failure mechanisms of piles in liquefiable soils still remain unclear. This paper presents a shake-table experiment conducted to investigate the dynamic behavior of a reinforced-concrete (RC) elevated cap pile foundation during (and prior to) soil liquefaction. Particular attention was paid to the failure mechanism of the piles during a strong shaking event. The experimental results indicate that decreasing the frequency and increasing the amplitude of earthquake excitation increased the pile bending moment as well as the speed of the excess pore pressure buildup in the free-field. The critical pile failure mode in the conducted testing configuration was found to be of the bending type, which was also confirmed by a representative nonlinear numerical model of the RC pile. The experimental results of this study can be used to calibrate numerical models and provide insights on seismic pile analysis and design. 相似文献
5.
为研究倾斜场地中桩基的动力响应,以2011年新西兰地震中受损的Dallington桥为原型,设计并完成可液化倾斜场地桥梁桩-土相互作用的振动台模型试验。试验再现了喷砂、冒水、地裂缝、场地流滑等宏观现象。试验结果表明,土层足够的液化势及惯性是造成倾斜场地侧向流滑的必要条件;浅层土相比深层土更易液化,液化层中的加速度由下至上呈现逐渐衰减的趋势,而未液化砂土层却表现为逐渐增大的特征;深部测点的桩侧土压力明显大于浅部测点,且土体的液化会弱化土对结构的压力;结构应变最大值位于上部桥台,而结构弯矩在桩身中部及土层分界面附近出现两个较大值,桩端嵌固及倾斜场地流滑是造成出现两个弯矩较大值的主要原因。 相似文献
6.
A three dimensional dynamic numerical methodology is developed and used to back-analyze experimental data on the seismic response of single piles in laterally spreading slopes. The aim of the paper is not to seek successful a-priori (Type A) predictions, but to explore the potential of currently available numerical techniques, and also to get feedback on modeling issues and assumptions which are not yet resolved in the international literature. It is illustrated that accurate simulation of the physical pile–soil interaction mechanisms is not a routine task, as it requires the incorporation of advanced numerical features, such as an effective stress constitutive soil model that can capture cyclic response and shear-induced dilation, interface elements to simulate the flow of liquefied ground around the pile and proper calibration of soil permeability to model excess pore pressure dissipation during shaking. In addition, the “conventional tied node” formulation, commonly used to simulate lateral boundary conditions during shaking, has to be modified in order to take into account the effects of the hydrostatic pore pressure surplus that is created at the down slope free field boundary of submerged slopes. A comparative analysis with the two different lateral boundary formulations reveals that “conventional tied nodes”, which also reflect the kinematic conditions imposed by laminar box containers in centrifuge and shaking table experiments, may underestimate seismic demands along the upper part of the pile foundation. 相似文献
7.
传统通过p-y曲线法分析强震状态下黄土中桩基动力性状时未进行桩基结构模拟,获取的强震状态下黄土中桩基动力的相关动力参数不准确。本文提出新的强震状态下黄土中桩基动力性状分析方法,依据HS硬化模型设计HSS本构模型,通过模型获取强震状态下黄土中桩基动力的相关参数,以此为基础采用PLAXIS软件构建黄土中桩基有限元模型;通过两种模型从耦合荷载作用下的桩基桩身水平位移响应、桩身内力响应两方面对强震状态下黄土桩基动力性状展开实验分析。实验结果表明,所提方法可对强震状态下黄土中桩基动力性状进行准确分析。 相似文献
8.
The construction of large offshore wind turbines in seismic active regions has great demand on the design of foundations. The occurrence of soil liquefaction under seismic motion will affect the stability of the foundations and consequently the operation of the turbines. In this study, a group of earthquake centrifuge tests was performed on wind turbine models with gravity and monopile foundations, respectively, to exam their seismic response. It was found that the seismic behavior of models was quite different in the dry or saturated conditions. Each type of foundation exhibited distinct response to the earthquake loading, especially in the offshore environment. In the supplementary tests, several remediation methods were evaluated in order to mitigate the relatively large lateral displacement of pile foundation (by fixed-end pile and multi-pile foundation) and excessive settlement of gravity foundation (by densification, stone column, and cementation techniques). 相似文献
9.
The objectives of this paper are to show practically: (1) the validation of a proposed three-dimensional effective stress analysis for the pile foundations, and (2) the effectiveness of remedial deposits on pile stresses under liquefaction by making comparisons between the results of centrifuge tests and those of the proposed analysis. Two foundation models supported by end-bending piles were studied with improved and unimproved deposits. There exists a good consistency between the numerical and experimental results for excess pore water-pressure ratios ranging from 0 to about 0·9. From the numerical results, the bending moment at the pile top with the improved deposit is about 50 per cent lower than that with the unimproved deposit. However, it was found that the smaller the bending moment develops in the pile with the improved deposit, the larger the compressive and/or tensional axial stresses in the pile. This is due to the predominant excitation of rocking vibration of the foundation. From the analytical and experimental results, it has been found that the remedial method can be a variable means to protect piles from soil liquefaction hazards. However, both axial stress and bending moment produced in piles should be considered in assessing the liquefied seismic capacity of group pile-foundation–structural systems with improved soil deposits. © 1998 John Wiley & Sons, Ltd. 相似文献
10.
11.
Alexandros I. ValsamisGeorge D. Bouckovalas Yannis K. Chaloulos 《Soil Dynamics and Earthquake Engineering》2012,34(1):99-110
Extensive damage to pile-supported structures has been witnessed in several recent earthquakes (Chi-Chi, 1999; Kobe, 1995, etc.), as a result of liquefaction-induced lateral spreading of slightly sloping ground or free-face topographic irregularities. This paper presents a parametric analysis of the basic pile and soil parameters, as well as the pile-soil interaction mechanisms affecting the response of single piles subjected to such lateral spreading, based on numerical simulation with the nonlinear P-y method. In parallel, a set of design charts and analytical relations is established, for approximate computation of maximum pile deflections and bending moments, using a “theory guided” multi-variable statistical analysis of the numerical predictions. Three different combinations (design cases) of pile head constraints and soil conditions were considered, which are commonly encountered in practice. The overall accuracy of the proposed analytical relations is evaluated against experimental results from seven centrifuge and five large shaking table experiments. 相似文献
12.
A case study is presented of the interaction between the bending due to laterally spreading forces and axial-load induced settlement on the piled foundations of the Kandla Port and Customs Tower located in Kandla Port, India, during the 2001 Bhuj earthquake. The 22 m tall tower had an eccentric mass at the roof and was supported on a piled-raft foundation that considerably tilted away as was observed in the aftermath of the earthquake. The soil at the site consists of 10 m of clay overlaid by a 12 m deep sandy soil layer. Post-earthquake investigation revealed the following: (a) liquefaction of the deep sandy soil strata below the clay layer; (b) settlement of the ground in the vicinity of the building; (c) lateral spreading of the nearby ground towards the sea front. The foundation of the tower consists of 0.5 m thick concrete mat and 32 piles. The piles are 18 m long and therefore passes through 10 m of clayey soil and rested on liquefiable soils. Conventional analysis of a single pile or a pile group, without considering the raft foundation would predict a severe tilting and/or settlement of the tower eventually leading to a complete collapse. It has been concluded that the foundation mat over the non-liquefied crust shared a considerable amount of load of the superstructure and resisted the complete collapse of the building. 相似文献
13.
The present study aims to obtain p-y curves(Winkler spring properties for lateral pile-soil interaction) for liquefied soil from 12 comprehensive centrifuge test cases where pile groups were embedded in liquefiable soil. The p-y curve for fully liquefied soil is back-calculated from the dynamic centrifuge test data using a numerical procedure from the recorded soil response and strain records from the instrumented pile. The p-y curves were obtained for two ground conditions:(a) lateral spreading of liquefied soil, and(b) liquefied soil in level ground. These ground conditions are simulated in the model by having collapsing and non-collapsing intermittent boundaries, which are modelled as quay walls. The p-y curves back-calculated from the centrifuge tests are compared with representative reduced API p-y curves for liquefied soils(known as p-multiplier). The response of p-y curves at full liquefaction is presented and critical observations of lateral pile-soil interaction are discussed. Based on the results of these model tests, guidance for the construction of p-y curves for use in engineering practice is also provided. 相似文献
14.
Numerical analysis of an infinite pile group in a liquefiable soil was considered in order to investigate the influence of pile spacing on excess pore pressure distribution and liquefaction potential. It was found that an optimal pile spacing exists resulting in minimal excess pore pressure. It was also found that certain pile group configurations might reduce liquefaction potential, compared to free field conditions. It was observed that for closely spaced piles and low frequency of loading, pile spacing has little influence on the response of the superstructure. 相似文献
15.
Numerical simulation of liquefaction effects on seismic SSI 总被引：3，自引：0，他引：3
Fernando Lopez-Caballero Arezou Modaressi Farahmand-Razavi 《Soil Dynamics and Earthquake Engineering》2008,28(2):85-98
The present paper deals with the influence of soil non-linearity, introduced by soil liquefaction, on the soil–foundation–structure interaction phenomena. The objective is to reveal the beneficial or unfavourable effects of the non-linear SSI on both structural drift and settlement of a given structure. Factors such as the signal modification due to liquefaction, and ratios of fundamental frequencies of soil, structure and signal may play an important role on the damage of the structure. The importance of each of these factors is evaluated through a significant parametric study. A 2D coupled finite element modelling is carried out using an elastoplastic multi-mechanism model to represent the soil behaviour. This paper presents the research work we did in the framework of the European Community project NEMISREF (New methods of mitigation of seismic risk on existing foundations, GRDI-40457), to study possible retrofitting measures using GEFDYN computational tools. 相似文献
16.
Although batter pile foundations are widely used in civil engineering structures, their behavior under seismic loadings is not yet thoroughly understood. This paper provides insights about the differences in the behavior of batter and vertical piles under seismic soil-pile-superstructure interaction. An experimental dynamic centrifuge program is presented, where the influences of the base shaking signal and the height of the gravity center of the superstructure are investigated. Various seismic responses are analyzed (displacement and rotation of the pile cap, total shear force at the pile cap level, overturning moment, residual bending moment, total bending moment and axial forces in piles). It is found that in certain cases batter piles play a beneficial role on the seismic behavior of the pile foundation system. The performance of batter piles depends not only on the characteristics of the earthquakes (frequency content and amplitude) but also on the type of superstructures they support. This novel experimental work provides a new experimental database to better understand the behavior of batter pile foundations in seismic regions. 相似文献
17.
桩基础抗震性能的简易评价方法 总被引：1，自引：0，他引：1
桩基础的抗震性能可从承载力和变形两方面来评价.承载力可考虑地震时作用于结构上的荷载组合,多采用拟静力法进行分析,不同因素变异的影响可用概率分析或可靠度方法予以考虑.变形分析多为按承载力设计之后的校核,其中地震力和土体参数以及地质条件等因素影响可分别加以评估.本文着重阐明基于一维波动方程和概率分析的桩基抗震性能实用分析方法,并以桥梁桩基础为例进行讨论,其中考虑的关键因素为设计地震加速度、测站记录、基桩尺寸及其配筋率.研究表明,当土层液化可忽略时最大弯矩会发生在桩顶,故增加桩顶延性可有效提升桩基础的抗震性能. 相似文献
18.
Development of new drain method for protection of existing pile foundations from liquefaction effects 总被引：1，自引：0，他引：1
Naoyuki Harada Ikuo Towhata Tadashi Takatsu Shinsuke Tsunoda Vlatko Sesov 《Soil Dynamics and Earthquake Engineering》2006,26(2-4):297-312
Pile foundation as well as other underground structures could be seriously affected by soil liquefaction during strong earthquakes. Damages on pile foundation due to liquefaction can be reduced by implementation of some soil improvement method. Main objective of present study is developing of drain method that can improve the soil in order to mitigate the destructiveness of liquefaction on superstructure supported by pile foundation. Series of shaking table tests were conducted on 2×2 pile foundation and soil model was improved by drains. Configurations of drains around piles, intensity of shaking were one of the parameters that were changing during the tests in order to investigate the response of pile foundation in improved soil condition.Shaking table tests and performed On-site experiment showed the following effects of the new drain method. (1) When the intensity of earthquake motion is 200 gal or less, generation of excess pore water pressure is reduced and the pile bending moment is decreased, (2) when the intensity of earthquake motion is stronger (300 gal or more), drainage effect prevents disappearance of subgrade reaction, and (3) proposed new type of drain can control excess pore water pressure without clogging. 相似文献
19.
The aim of this paper is to study the effects of soil–structure interaction on the seismic response of coupled wall-frame structures on pile foundations designed according to modern seismic provisions. The analysis methodology based on the substructure method is recalled focusing on the modelling of pile group foundations. The nonlinear inertial interaction analysis is performed in the time domain by using a finite element model of the superstructure. Suitable lumped parameter models are implemented to reproduce the frequency-dependent compliance of the soil-foundation systems. The effects of soil–structure interaction are evaluated by considering a realistic case study consisting of a 6-storey 4-bay wall-frame structure founded on piles. Different two-layered soil deposits are investigated by varying the layer thicknesses and properties. Artificial earthquakes are employed to simulate the earthquake input. Comparisons of the results obtained considering compliant base and fixed base models are presented by addressing the effects of soil–structure interaction on displacements, base shears, and ductility demand. The evolution of dissipative mechanisms and the relevant redistribution of shear between the wall and the frame are investigated by considering earthquakes with increasing intensity. Effects on the foundations are also shown by pointing out the importance of both kinematic and inertial interaction. Finally, the response of the structure to some real near-fault records is studied. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
20.
This paper presents a parametric study that looks into the influence of pile rake angle on the kinematic internal forces of deep foundations with inclined piles. Envelopes of maximum kinematic bending moments, shear forces and axial loads are presented along single inclined piles and 2 × 2 symmetrical square pile groups with inclined elements subjected to an earthquake generated by vertically incident shear waves. Inclination angles from 0° to 30° are considered, and three different pile–soil stiffness ratios are studied. These results are obtained through a frequency–domain analysis using a boundary element–finite element code in which the soil is modelled by the boundary element method as a homogeneous, viscoelastic, unbounded region, and the piles are modelled by finite elements as Euler–Bernoulli beams. The rotational kinematic response of the pile foundations is shown to be a key factor on the evolution of the kinematic internal forces along the foundations. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献