首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
The aim is to define the mechanism of chemical reactions that are responsible for the salinization of the Azraq basin along groundwater flow path, using inverse modeling technique by PHREEQC Interactive 2.8 for Windows. The chemical analysis of representative groundwater samples was used to predict the causes of salinization of groundwater. In addition, the saturation indices analysis was used to characterize the geochemical processes that led to the dissolution of mineral constituents within the groundwater aquifer system. According to the modeling results, it was noted that the groundwater at the recharge area was undersaturated with respect to calcite, dolomite, gypsum, anhydrite, and halite. Thus, the water dissolved these minerals during water rock interaction, and therefore, the concentration of Ca, Mg, Na, and SO4 increased along the groundwater flow path. Furthermore, the groundwater at the discharge area was oversaturated with respect to calcite and dolomite. This meant that the water would precipitate these minerals along the flow path, while the water was undersaturated with respect to gypsum and halite throughout the simulated path; this showed the dissolution processes that take place during water-rock interaction. Therefore, the salinity of the groundwater increased significantly along the groundwater flow paths.  相似文献   

2.
Groundwater is a critical resource in Deoria district, as it is the main source of drinking water and irrigation. The aquifer has deteriorated to a high degree, during the last two to three decades, in quality and quantity due to high population growth and environmental pollution. More than 90% of the population get their drinking water from subsurface waters. Fifteen wells were sampled in June 2006 to probe the hydrogeochemical components that influence the water quality. The results show that groundwater have EC, TDS, Na+, Mg2+, HCO3− and TH higher than the WHO, 1997 maximum desirable limits. A hydrogeochemical numerical model for carbonate minerals was constructed using the PHREEQC package. The regression analysis shows that there are three groups of elements which are significantly and positively correlated. The main hydrochemical facies of the aquifer (Ca + Mg–HCO3) represents 33.33% of the total wells. The geochemical modeling demonstrated that the reactions responsible for the hydrochemical evolution in the area fall into three categories: (1) dissolution of salts, (2) precipitation of dolomite, (3) ion exchange. Solubility of dolomite, calcite, aragonite and gypsum were assessed in terms of the saturation index. The thermodynamic prerequisites for dolomite supersaturation reactions are satisfied by subsurface waters, since they are supersaturated with respect to dolomite, undersaturated (or in equilibrium) with respect to calcite, and undersaturated with respect to gypsum. The Ca2+ versus SO42− and Mg2+ versus SO42− trends are also compatible with homologous trends resulting from dolomite supersaturation.  相似文献   

3.
The evolution of magnesium chloride brines with high bromide contents via a multistage reaction and dissolution process has been studied in brine seeps of a German potash mine. The observed chemical trends and phase equilibria can be modeled and interpreted in terms of a NaCl solution (cap rock brine) infiltrating into a potash zone characterized by the metamorphic mineral assemblage kieserite + sylvite + halite + anhydrite. Establishment of a persistent, stable equilibrium assemblage and constant fluid composition in the invariant point IP1 of the six component (Na-K-Mg-Ca-Cl-SO4-H2O) system of oceanic salts is prevented by the perpetually renewed input of NaCl-brine and by the intermittent exposure of incompatible kieserite. Instead, the solutions develop towards the metastable invariant point IP1(gy), with the mineral assemblage carnallite + polyhalite + sylvite + halite + gypsum, where gypsum takes the place of anhydrite (stage I). The temporary exposure of kieserite and the ensuing formation of polyhalite effectively buffer the solutions along the metastable polyhalite phase boundary during stages II and III. Eventually, in stage IV, polyhalite becomes depleted and admixture of more NaCl brine leads to low sulfate solution compositions, which are now only constrained by carnallite + sylvite + halite, and the once hexary system degenerates to a quaternary one (Na-K-Mg-Cl-H2O) in point E. Bromide in brines shows equilibrium partitioning with respect to the wall rock minerals. The pattern of evolving brine compositions may serve as a model for similar brine occurrences, which in some cases may have been misinterpreted as remains of fossil, highly concentrated and chemically modified seawater. Similar magnesium chloride brines of salt lakes (e.g., Dead Sea, Dabusun Lake) show subtle differences and are constrained by fewer mineral equilibria (more degrees of freedom), and their low sulfate contents are due to gypsum precipitation, driven by calcium chloride input from dolomitization reactions. Finally, the observed reaction sequence is generalized, and a model for the formation of magnesium sulfate depleted, chloride-type potash salts and bischofite deposits by leaching of sulfate-type evaporites is proposed.  相似文献   

4.
The geochemistry of Ca, Sr, Ba and Ra sulfates in some deep brines from the Palo Duro Basin of north Texas, was studied to define geochemical controls on radionuclides such as 90Sr and 226Ra. Published solubility data for gypsum, anhydrite, celestite, barite and RaSO4 were first reevaluated, in most cases using the ion interaction approach of Pitzer, to determine solubility products of the sulfates as a function of temperature and pressure. Ionic strengths of the brines were from 2.9 to 4.8 m, their temperatures and pressures up to 40°C and 130 bars. Saturation indices of the sulfates were computed with the ion-interaction approach in one brine from the arkosic granite wash fades and four from the carbonate Wolfcamp Formation. All five brines are saturated with respect to gypsum, anhydrite and celestite, and three of the five with respect to barite. All are undersaturated by from 5 to 6 orders of magnitude with respect to pure RaSO4. 226Ra concentrations in the brines, which ranged from 10?11.3 to 10?12.7 m, are not controlled by RaSO4 solubility or adsorption, but possibly by the solubility of trace Ra solid solutions in sulfates including celestite and barite.  相似文献   

5.
Study of the groundwater samples from Tajarak area, western Iran, was carried out in order to assess their chemical compositions and suitability for agricultural purposes. All of the groundwaters are grouped into two categories: relatively low mineralized of Ca–HCO3 and Na–HCO3 types and high mineralized waters of Na–SO4 and Na–Cl types. The chemical evolution of groundwater is primarily controlled by water–rock interactions mainly weathering of aluminosilicates, dissolution of carbonate minerals and cation exchange reactions. Calculated values of pCO2 for the groundwater samples range from 2.34 × 10−4 to 1.07 × 10−1 with a mean value of 1.41 × 10−2 (atm), which is above the pCO2 of the earth’s atmosphere (10−3.5). The groundwater is oversaturated with respect to calcite, aragonite and dolomite and undersaturated with respect to gypsum, anhydrite and halite. According to the EC and SAR the most dominant classes (C3-S1, C4-S1 and C4-S2) were found. With respect to adjusted SAR (adj SAR), the sodium (Na+) content in 90% of water samples in group A is regarded as low and can be used for irrigation in almost all soils with little danger of the development of harmful levels of exchangeable Na+, while in 40 and 37% of water samples in group B the intensity of problem is moderate and high, respectively. Such water, when used for irrigation will lead to cation exchange and Na+ is adsorbed on clay minerals while calcium (Ca2+) and magnesium (Mg2+) are released to the liquid phase. The salinity hazard is regarded as medium to high and special management for salinity control is required. Thus, the water quality for irrigation is low, providing the necessary drainage to avoid the build-up of toxic salt concentrations.  相似文献   

6.
The present study highlights the hydrogeological and hydrogeochemical characteristics of the CO2-rich thermal–mineral waters in Kayseri, Turkey. These waters of Dokuzpınar cold spring (DPS) (12–13°C), Yeşilhisar mineral spring (YMS) (13–16°C), Acısu mineral spring (ACMS) (20–22.5°C), Tekgöz thermal spring (TGS) (40–41°C), and Bayramhacı thermal-mineral spring (BTMS) (45–46.5°C) have different physical and chemical compositions. The waters are located within the Erciyes basin in the Central Anatolian Crystalline complex consisting of three main rock units. Metamorphic/crystalline rocks occur as the basement, sedimentary rocks of Upper Cretaceous-Quaternary age form the cover, and volcanosedimentary rocks Miocene-Quaternary in age represent the extrusive products of magmatism acting in that period. All these units are covered unconformably by terrace and alluvial deposits, and travertine occurrences have variable permeability. Dokuzpinar cold spring, YMS and ACMS localized mainly along the faults within the region have higher Na+ and Cl− contents whereas TGS and BTMS have higher amounts of Ca2+ and HCO 3 − . The high concentrations of Ca2+ and HCO 3 − are mainly related to the high CO2 contents resulting from interactions with carbonate rocks. Whereas the high Na+ content is derived from the alkaline rocks, such as syenite, tuff and basalts, the Cl− is generally connected to the dissolution of the evaporitic sequences. These waters are of meteoric-type. BTMS deviates from meteoric water line. The content is related to the increases in the δ18O compositions due to mineral–water interaction (re-equilibrium) process. CO2-dominated YMS and ACMS with low temperatures have higher mineralizations. Yeşilhisar mineral spring, ACMS, TGS and BTMS are oversaturated in terms of calcite, aragonite, dolomite, goethite and hematite, and undersaturated with respect to gypsum, halite and anhydrite. Yeşilhisar mineral spring, ACMS and BTMS are also characterized by recent travertine precipitation. Dokuzpınar cold spring is undersaturated in terms of the above minerals. The higher ratios of Ca/Mg and Cl/HCO3, and lower ratios of SO4/Cl in BTMS than TGS suggest that TGS has shallow circulation compared to BTMS, and/or has much more heat-loss enroute the surface. The sequence of hydrogeochemical and isotopic compositions of the waters is in an order of DPS>YMS>ACMS>TGS>BTMS and this suggests a transition period from a shallow circulation to a deep circulation path.  相似文献   

7.
Most efforts in the study of sea-marginal sabkhas have concentrated on the Persian Gulf, but little is known about the sediments and mineralogy of sabkhas marginal to other seas. The purpose of this paper was to present some geochemical and mineralogical observations in a recent sabkha on the coast of Sinai along the Gulf of Suez. The sabkha is composed of coarse clastic sediments with marine-derived groundwater at depth of about 1 m. The general morphology, climate and water salinity of the Gulf of Suez resemble those of the Persian Gulf, despite the fact that the content of authigenic evaporites in this sabkha is more sparse. The evaporite minerals accumulated only in the upper 30–40 cm of the sabkha, below that and down to the groundwater table, there is no accumulation of evaporites. Laterally, the salinity of the groundwater in the sabkha and the concentration of evaporites in the sediments above it increase constantly with distance from the shore. In contrast to the Persian Gulf where anhydrite is a major evaporite mineral, in Belayim gypsum is the only calcium sulphate mineral in the recent sabkha. Anhydrite is found only in an old elevated sabkha where it recrystallized from gypsum. The gypsum occurs as interstitial crystal concentrations or lithified horizons almost exclusively at the depth of 20–40 cm below the sabkha surface. Above that, in the uppermost horizons, there is in situ accumulation of interstitial halite crystals. The total concentrations of gypsum and halite are almost equal in this sabkha. The sea water recharge in El Belayim is almost exclusively by seepage through the sabkha sediments and not by flooding. The groundwater under this sabkha is only slightly more saline than the Gulf water, thus, not heavy enough for extensive downward refluxing. The major hydrodynamic process must be upward migration of the brines from the groundwater, precipitating on the way gypsum and later halite with some magnesite. Since the sediments of the sabkha are too coarse to support extensive capillary movement, the brines must, therefore, migrate upwards due to ‘evaporative pumping’.  相似文献   

8.
Nabq sabkha exists 16 km north of Sharm El Sheikh City occupying the low land topography in the alluvial fan zone along the coastal area, Gulf of Aqaba, Sinai, Egypt. The long axis of the sabkha trends NW–SE receiving water from two different sources: meteoric water drained from the surrounding mountainous area and seawater seepage. Field observations help to divide the area into raised beach, hill slopes, sabkha basin, and coastal area. The sabkha basin can be subdivided from its center outward into (1) basin center hypersaline lake flourished with microbial mat and precipitation of halite as rafts, cumulates, and chevrons, (2) saturated saline sand and/or mud flat zone with the extensive growth of gypsum and halite crystals growing displacively as well as different forms of petee structures, and (3) an elevated marginal dry zone with tepee structures. Mineralogical analysis reveals that quartz, halite, and gypsum are the dominant minerals with subordinate amount of aragonite, anhydrite, thenardite, and/or polyhalite. In addition, clay minerals in the mudflat zone are presented by illite and smectite, indicating derivation of soil from the surrounding basement rocks. Chemical analysis of the collected brine samples reveals alkali character in the saline lake (pH?=?7.6) and high concentrations of Na+ (680 meq/l), Cl? (940 meq/l), Mg2+ (208 meq/l), Ca2+ (70 meq/l), SO 4 2+ (30 meq/l), and HCO 3 ? (6 meq/l). The high salinity values are due to the aridity of the area, which favors precipitation of halite. Using comparative sedimentological, chemical, and mineralogial methods between such modern and ancient evaporitic environments and by detailed field, petrographic and mineralogical studies of modern evaporite environments help to interpret paleo-depositional environments of ancient evaporites sequences still in debate.  相似文献   

9.
The Zálesí vein-type deposit is hosted by Early Paleozoic high-grade metamorphic rocks on the northern margin of the Bohemian Massif. The mineralization is composed of three main stages: uraninite, arsenide, and sulfide. The mineral assemblages formed at low temperatures (~80 to 130°C, locally even lower) and low pressures (<100 bars). The salinity of the aqueous hydrothermal fluids (0 to 27 wt.% salts) and their chemical composition vary significantly. Early fluids of the oldest uraninite stage contain a small admixture of a clathrate-forming gas, possibly CO2. Salinity correlates with oxygen isotope signature of the fluid and suggests mixing of brines [δ 18O around +2‰ relative to standard mean ocean water (SMOW)] with meteoric waters (δ 18O around −4‰ SMOW). The fluid is characterized by highly variable halogen ratios (molar Br/Cl = 0.8 × 10−3 to 5.3 × 10−3; molar I/Cl = 5.7 × 10−6 to 891 × 10−6) indicating a dominantly external origin for the brines, i.e., from evaporated seawater, which mixed with iodine-enriched halite dissolution brine. The cationic composition of these fluids indicates extensive interaction of the initial brines with their country rocks, likely associated with leaching of sulfur, carbon, and metals. The brines possibly originated from Permian–Triassic evaporites in the neighboring Polish Basin, infiltrated into the basement during post-Variscan extension and were finally expelled along faults giving rise to the vein-type mineralization. Cenozoic reactivation by low-salinity, low-δ 18O (around −10‰ SMOW) fluids of mainly meteoric origin resulted in partial replacement of primary uraninite by coffinite-like mineral aggregates.  相似文献   

10.
Reservoir fluid compositions have been assessed from analytical data on water samples collected from thermal and cold waters in Balçova geothermal field. The results of mineral equilibrium modelling indicate that the waters, with some exceptions, are systematically supersaturated with respect to calcite, aragonite, dolomite, chalcedony and quartz, but undersaturated with respect to amorphous silica, celestite, anhydrite and gypsum and undersaturated or supersaturated with respect to barite, low-albite, K-feldspar, gibbsite and Fe(OH)3(a). Calculation of mineral saturation states and geochemical analyses of scale and field observations show that carbonate minerals (calcite, aragonite and dolomite) are most likely to be precipitated as a scale type. Besides carbonates, scale formation risk of amorphous silica, Fe(OH)3(a), anhydrite, barite and celestite minerals should be taken into account in some wells and surface equipment. Most of the waters, with some exceptions, have carbonate scaling risk at all temperatures, whereas the other scaling risks only exist over a limited temperature range. While silica, Fe(OH)3(a) and barite show a scaling tendency at low temperatures, anhydrite and celestite scaling occurs at higher temperatures.  相似文献   

11.
This paper reveals the geochemical processes of dissolution, precipitation and cation exchange that took place during water–rock interaction between water seepages through the Tannur Dam. The Schoeller diagram indicates that there are three major water types originating during water–rock interaction. The first water type is characterized by low salinity that ranges from 1,300 to 2,800 µs/cm, which represents the reservoir water and the water in the right side of the central gallery. The second water type is in the left side of the central gallery, which exhibits medium salinity that reaches about 4,400 µs/cm. The third water type is characterized by very high salinity that reaches a value of around 8,500 µs/cm and represents the water in the right existing adit. The increase of salinity can be explained due to the dissolution of carbonate and sulfate minerals that form the matrix of the foundation and the abutment rocks, and the dissolution of the grout curtain, which is composed of cement and bentonite. Hydrogeochemical modeling, using a computer code PHREEQC, was used to obtain the saturation indices of specific mineral phases, which might be related to interaction with water seepages, and to identify the chemical species of the dissolved ions. The thermodynamic calculations indicate that most of the water samples were undersaturated with respect to gypsum, anhydrite and halite, and were saturated and/or supersaturated with respect to calcite and dolomite. Ca(HCO3)2 is the primary water type, as a result of dissolution of carbonate minerals such as calcite and dolomite prevailing at the dam site. However, cation-exchange processes are responsible for the formation of the Na2SO4 water type from the CaSO4 type that formed due to the dissolution of gypsum.  相似文献   

12.
Presence of fluoride in groundwater is a public health problem in the so-called endemic fluorosis belt of the central Iran, where the groundwater is the major source of drinking water in most urban and rural areas. Therefore, an attempt has been made to determine the hydrogeochemical factors controlling fluoride enrichment in the groundwater resources at this belt. Fluoride concentrations ranged from 0.20 to 1.99 mg/L (1.02 ± 0.47) in groundwater samples. The presence of different F-bearing minerals and also clay minerals in the soils and aquifer materials was confirmed using XRD analysis. To identify probable sources of dissolved F? and investigate groundwater quality, multivariate statistical analyses were carried out. Geochemical modeling indicated that all samples were undersaturated with respect to fluorite, halite, gypsum and anhydrite and mostly oversaturated with respect to calcite and dolomite. Contrary to most high-fluoride regions in the World, the high F? content was dominated by Na–Cl- and Ca–SO4-type groundwater in the study area. Besides, fluoride showed negative relationship with pH and HCO3 ? in groundwater. In order to assess the bioavailability of fluoride in soils, a two-step chemical fractionation method was applied. The results showed that fluoride in soils mostly accompanied with the residual and water-soluble fractions and was poorly associated with soil’s bonding sites. Calculated aqueous migration coefficient demonstrated that fluoride in the studied soils was mobile to easily leachable to the groundwater. Finally, the results demonstrated that combination of water–rock interaction and influence of clay minerals is geochemical mechanism responsible for controlling fluoride enrichment in groundwater.  相似文献   

13.
The study of brine aquifers in southern Taiwan is highly complicated by hybrid geochemical reactions, which obscure important geochemical information. Using multivariate analysis on major and minor ion compositions normalized by Cl− content, chemical constituents were combined into two principal components representing brine mixing and mineral precipitation. Comparing to multivariate analysis on the original data, this procedure reveals more geochemical information. It demonstrates that the brine groundwater of the region is primarily composed of highly evaporated seawater. The evaporation ratio is >70%; a point at which calcite, dolomite and gypsum precipitate. Oxygen and hydrogen isotopic compositions confirm this inference; and further, geochemical modeling quantitatively determined the evaporation ratio to be about 85%. Natural boron contamination is a consequence of brine groundwater. Two evolutionary trends in the plotting of the Cl/B ratio versus Cl− can be identified: (1) Cl/B ratio decreases with boron being released from clay minerals when brine aquifers are flushed with freshwater; and (2) Cl/B ratio increases when seawater of a high Cl/B ratio infiltrates coastal aquifers.  相似文献   

14.
Salts produced using brines of the Mamfe Basin were analysed by XRD for their mineral composition and ICP-MS for minor element composition. Halite (NaCl) and dolomite (CaMg (CO3)2) constitute the major minerals with minor impurities from Mo and Cd in the chlorides and Sc and Cu in the carbonates. The mineral composition is evidence of dissolution of evaporites with parent brine of marine origin. Other elements analysed are suggested to be adsorbed to these salts and result from water–rock interaction. The elements partitioned based on their correlation to other elements are suggested to derive from sulphates including barite for Ba, sulphides for Pb, Zn, silicates for Zr, Mn and oxides for V, Cr. The electrical conductance of the brines is related to the salt yield by the equation; M = 9 × 10− 4E− 3.27, and it can be used to estimate salt yield throughout the year. Over 1200 tons of salt consisting dominantly of grade I halite are lost annually as brines across the basin. Purification is required for some minor elements including Ba, Pb, Hg and Cd for use as a condiment. A genetic relation between the parent brine, sulphide minerals and organic matter-rich sediments is proposed.  相似文献   

15.
Phase relations in the 6-component system Na-K-Mg-Ca-SO4-Cl-H2O have been calculated for halite saturation, 25°C and 1 atm pressure. Using a Jänecke projection with the apices Ca-Mg-K2-SO4, 27 stable invariant points have been located which are connected by 69 univariant curves. Polyhalite is the only quaternary solid, but anhydrite occupies the bulk of the interior tetrahedral space. Consequently, 24 of the invariant points lie very close to the Ca-free base, Mg-K2-SO4. The remaining three points involve tachyhydrite and/or antarcticite. All points but two (20,27) represent peritectic conditions. Metastable equilibria have been calculated for the Ca-free system and yield relations corresponding to the solar diagram.Seawater lies in the subspace anhydrite-halite-carnallite-kieserite-bischofite (point 20) and its evaporation has been discussed for conditions of equilibrium and fractional crystallization. After gypsum is converted to anhydrite, halite precipitates. The next phase, under equilibrium conditions, is glauberite, crystallizing at the expense of anhydrite. Continued evaporation leads to glauberite resorption and eventual replacement by polyhalite. Then follow the magnesium sulfates epsomite, hexahydrite and kieserite, which are joined by carnallite. Polyhalite is replaced by anhydrite and bischoflte is added at the final invariant condition. Kainite does not appear as a primary phase under equilibrium conditions, but it is an important phase during fractional crystallization, where Ca-phases are not allowed to back-react with the brine.Up to the appearance of glauberite, thickness ratios of halite: anhydrite couplets (equilibrium or fractionation) can vary from 0 to 7, the relative amount of halite increasing with more intense evaporation. During evaporation, the activity of H2O decreases from 0.98 (seawater) to 0.34 (final invariant brine). The data provided can be used to evaluate the effects of mineral precipitation, evaporation and brine mixing for a wide variety of natural brines.  相似文献   

16.
Interstitial brines from the Temblor and the McAdams sandstones at Kettleman are essentially NaCaCl solutions with subsidiary SO4 and the total salinities are roughly 30,000 and 10,000 ppm, respectively. Activities of H+ and all other aqueous species have been calculated for 100°C (the in situ temperatures of the brines) from chemical analyses of the brines and 100-degree dissociation constants alone. The brine alkalinities measured at surface temperature appear to be too low when comparing them against alkalinities calculated from the measured pHs of the brines. Consequently, alkalinities calculated for 25°C were substituted for the measured ones in the calculation of the distribution of aqueous species at 100°C.Although the brines are nearly neutral (pH 6·3–d7·9) at surface temperature, their pHs calculated for 100°C range from 8·1 to 8·7 (± 0·35). These pHs and the 100-degree activities of the other aqueous species permit graphic representation of the brines on activity diagrams. Most brines fall at or near the boundaries between the stability fields of quartz, albite, microcline, mica, montmorillonite and anhydrite. Because these minerals are present as authigenic phases in the sandstones, the calculations suggest that the minerals are in stable equilibrium with the brines. By contrast, the calculations suggest that the brines are supersaturated by about three orders of magnitude with respect to calcite, also present in the sandstones. One possible explanation for this is kinetic inhibition of calcite crystallization by Mg2+ and SO42? ions in the brines. Phosphatic pellets, glauconite and probably dolomite, pyrite and some kaolinite are early authigenic minerals preserved in the sandstones and they are not now in equilibrium with the brines, which are supersaturated with respect to dolomite and pyrite. The chemical relationship between the brines and the diagenetic minerals laumontite and sphene, also present in the Temblor Formation, cannot be assessed reliably until the thermodynamic properties of laumontite and of aqueous titanium complexes are well known.  相似文献   

17.
Thermal waters of the Usak area have temperatures ranging from 33 to 63°C and different chemical compositions. These waters hosted by the Menderes Metamorphic rocks emerge along fault lineaments from two geothermal reservoirs in the area. The first reservoir consists of gneiss, schists, and marbles of the Menderes Metamorphic rocks. The recorded reservoir is Pliocene lacustrine limestone. Hydrogeochemical studies indicate that thermal waters were mixed with surface waters before and/or after heating at depth. The results of mineral equilibrium modeling indicate that all the thermal waters are undersaturated at discharge temperatures for gypsum, anhydrite, and magnesite minerals. Calcite, dolomite, aragonite, quartz, and chalcedony minerals are oversaturated in all of the thermal waters. Water from the reservoir temperatures of the Usak area can reach upto120°C. According to δ18O and δ2H values, all thermal and cold groundwater are of meteoric origin.  相似文献   

18.
《Applied Geochemistry》2001,16(9-10):1153-1163
The waters of the thermal springs at Alhama de Granada vary in temperature between 27 and 45°C. Temporal changes in the composition of the principal spring (Baños Viejos) indicate that a small degree of mixing may occur between deep thermal waters and shallow groundwater. Slight compositional variations also occur between the various thermal springs in the study area. These spatial variations are due to the different local hydrodynamic conditions in the springs. Towards the north in less hydraulically transmissive rocks, cooling of the rising water is more noticeable, as are ion exchange and processes of SO4 reduction. The chemical composition of the water is related to the dissolution of evaporites (SO4 and Cl salts), carbonates and silicates, and to the possible existence of sources of S within the rock. Estimates of the mean residence times have been obtained based on 14CDIC and T. The state of thermodynamic equilibrium at the spring discharge was calculated using the SOLMINEQ.88 program. The results indicate that all the samples are supersaturated with respect to quartz, chalcedony, cristobalite, calcite, aragonite and dolomite, and undersaturated with respect to gypsum, anhydrite and halite. The use of different geothermometers and modelling of saturation indices for quartz, albite and anhydrite indicate temperatures of about 110°C.  相似文献   

19.
The present paper investigates hydrochemical processes and water quality in the Mornag aquifer in NE Tunisia. Groundwater samples were collected during a field campaign, and were analysed for major and trace elements. The collected waters have a chemical facies rich in Ca2+, Na+ and Cl-. Piper diagram shows a progressive increase in chloride ions along with increasing salinity. Saturation indexes calculated by using PHREEQC (USGS) show that the Mornag waters are slightly saturated with respect to carbonates (calcite and dolomite), while undersaturated with respect to gypsum, halite and other evaporitic minerals. The current composition of waters takes place via dissolution of halite and Ca-sulfates, where the increase in calcium is partially balanced by possible calcite precipitation. The relevant recorded pollutant is nitrate, which was likely dispersed from agricultural soils, while heavy metals were generally far below values of pollution thresholds, indicating no influence by mining activity.  相似文献   

20.
Groundwater constitutes the main source of water supply in the High Mekerra watershed of northwestern Algeria. This resource is currently under heavy pressures to meet the growing needs of drinking water and irrigation. This study assesses the geochemical characteristics of groundwater of the High Mekerra watershed at 21 points distributed across the two main aquifers (Ras El Ma and Mouley Slissen) in the region. Hydrochemical facies of Ras El Ma groundwater are dominantly MgCl and CaCl type, while those of Mouley Slissen groundwater are of CaHCO3 type. Principal component analysis shows a strong correlation between groundwater mineralization and Ca2+, Na+, Cl? and SO4 2? ions stemming from the dissolution of carbonates, gypsum and anhydrite. Groundwater mineralization evolves from south to north. Geochemical modeling shows that the High Mekerra groundwater is saturated with respect to calcite and dolomite and undersaturated with respect to gypsum and anhydrite. Nitrate concentrations that exceed the WHO standard (50 mg L?1) at several points are linked to the agro-pastoral activities in this region.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号