首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到17条相似文献,搜索用时 109 毫秒
1.
在求解板块运动参数的过程中,选用的台站分布越合理,参加解算的测站数据越多,求解的参数精度也就越高,但随之带来的就是系数矩阵的病态性问题,为了解决这个问题,采用了双h类岭估计方法对北美板块的欧拉参数进行估计,求出欧拉参数及其中误差,以及板块运动水平速度的残差百分比,并将求得的欧拉参数与其他模型进行对比,结果显示模型间具有较好的一致性,但仍有一定的差异;此外,测站速度残差0~1mm的百分比在80%以上,表明利用此方法求解精度较好。  相似文献   

2.
首先从多参数岭估计,即广义岭参数人手,给出其谱分解形式。然后就岭估计会使估值偏差增大的问题,在Liu估计的基础上,推导出一种新的有偏估计方法——Liu型广义岭估计,并给出该方法的模型、解式。Liu型广义岭估计可以在尽量不增大偏差的同时改进病态性,获得更好的估值。最后通过算例进行了比较分析。  相似文献   

3.
在第一类非线性回归模型中,经常出现病态问题,它严重影响计算结果的精度。提出了一种引入模型误差求解部分参数的方法,这种方法可以改变病态性质,提高对部分参数的求解精度。通过算例来检验这种方法的可行性并探讨它的使用范围。  相似文献   

4.
基于补偿最小二乘法思想,研究推导了半参数模型解算的极小化过程中,在残差和补偿项均赋予平滑参数的广义补偿最小二乘估计解的形式及其均方误差计算公式;模拟算例表明:在这种规则下,不仅可以克服病态性对半参数模型解的影响,而且也可以正确分离系统误差。新规则下,要求赋予的两个平滑参数之和等于1,各平滑参数严格限定在区间(0,1],从而使平滑参数的选择范围得到大幅缩小,为本法的应用提供了有利条件。  相似文献   

5.
探讨了岭估计方法在GPS高程拟合中的应用,并给出了岭估计中确定岭参数k值的一种新方法——方差扩大因子法。通过某地区GPS水准网数据进行实验验证,结果表明,与传统多项式曲面拟合模型比较,岭估计方法具有拟合精度高、适用复杂的地形等特点。  相似文献   

6.
利用Bursa模型进行空间直角坐标转换时,求解的过程中如果法方程的系数矩阵是病态,则求得的转换参数并不可靠.在谱修正迭代法的基础上,推导了基于谱修正迭代的Bursa模型公式,通过算例可知该方法可有效改善病态矩阵对坐标转换的影响,其坐标转换精度比Bursa模型高.  相似文献   

7.
大型结构的模型修正求解问题多呈现不同程度的病态,实测数据的微小误差都有可能造成求解的失效。该文研究了测量噪声影响下模型修正病态系统的求解问题。首先,介绍了结构模型修正的求解问题以及数学上常用的正则化方法;然后,通过一悬臂梁模型数值算例探讨了截断奇异值分解正则化方法和"L"曲线法在结构模型修正求解中的适用性。结果显示,适当的正则化可以有效的解决模型修正病态系统的求解问题;另外,该方法对于部分满足离散Picard条件的模型修正方程同样适用。最后,通过一导管架平台物理模型试验对该正则化方法的实用性进行了验证。  相似文献   

8.
一种确定岭估计参数的方法   总被引:1,自引:0,他引:1       下载免费PDF全文
岭估计是从减小均方误差的角度出发而提出的一种有偏估计方法,但是如何确定岭参数目前没有一个公认的良好方法。提出了一种如何确定岭参数的方法,并用算例验证这种方法的可行性。  相似文献   

9.
针对测量平差中的实际问题,引入半参数回归模型,分析了它在测量平差中应用的可能性,并以实例与经典测量平差方法进行精度分析,说明该方法的有效性。对含有系统误差的测量平差问题进行了试算,为进一步研究半参数回归模型在测量平差中的应用具有一定的意义。  相似文献   

10.
提出了一种基于半参数回归的数字水深模型(DDM)内插方法。将原始水深数据误差和内插函数的逼近误差分别视作数字水深模型的偶然误差和系统误差部分,构建DDM内插的半参数回归模型;基于距离法与L曲线法,分别确定正规化矩阵R与平滑因子α;采用按方位取点的加权平均法,估计内插函数在任意节点处的逼近误差。实验结果表明:所提方法提高了DDM的构建质量;海底地形复杂程度越大,所提方法对DDM构建质量的提高程度越大。  相似文献   

11.
大地测量中法方程病态性问题的初探   总被引:5,自引:1,他引:4  
在大地测量中,法方程病态问题大量存在。由于病态性的存在,致使按最小二乘法解算参数估值精度变差发生扭曲,最终使所得结果不能使用。重点研究奇异值分解法(SVD)和误差转移法解决病态问题的思想、途径、对关键问题的处理、适用范围等。最后通过GPS实测数据来验证这两种方法的有效性,其解算的结果表明:这两种方法能解决法方程病态性问题,且算法简便、易懂,有较强的应用价值。  相似文献   

12.
以单位四元数描述遥感影像共线条件方程,建立基于单位四元数的光束法平差模型。针对共线条件方程的非线性问题,基于LM(Levenberg-Marquardt)方法解算单位四元数光束法平差模型,并引入丹麦法实现无人机影像外方位元素的抗差估计。基于仿真数据和无人机影像对该方法进行了验证,结果表明:与基于单位四元数的无初值依赖算法进行比较,LM方法具有与单位四元数法相当的可靠性;引入丹麦法方法后可消除粗差观测值对参数估计的不利影响,得到较高精度的外方位元素估值。  相似文献   

13.
Internal solitary wave propagation over a submarine ridge results in energy dissipation, in which the hydrodynamic interaction between a wave and ridge affects marine environment. This study analyzes the effects of ridge height and potential energy during wave-ridge interaction with a binary and cumulative logistic regression model. In testing the Global Null Hypothesis, all values are p<0.001, with three statistical methods, such as Likelihood Ratio, Score, and Wald. While comparing with two kinds of models, tests values obtained by cumulative logistic regression models are better than those by binary logistic regression models. Although this study employed cumulative logistic regression model, three probability functions p^1, p^2 and p^3, are utilized for investigating the weighted influence of factors on wave reflection. Deviance and Pearson tests are applied to check the goodness-of-fit of the proposed model. The analytical results demonstrated that both ridge height (X1) and potential energy (X2) significantly impact (p<0.0001) the amplitude-based reflected rate; the P-values for the deviance and Pearson are all >0.05 (0.2839, 0.3438, respectively). That is, the goodness-of-fit between ridge height (X1) and potential energy (X2) can further predict parameters under the scenario of the best parsimonious model.Investigation of 6 predictive powers (R2, Max-rescaled R2, Somers'D, Gamma, Tau-a, and c, respectively) indicate that these predictive estimates of the proposed model have better predictive ability than ridge height alone, and are very similar to the interaction of ridge height and potential energy. It can be concluded that the goodness-of-fit and prediction ability of the cumulative logistic regression model are better than that of the binary logistic regression model.  相似文献   

14.
Internal solitary wave propagation over a submarine ridge results in energy dissipation, in which the hydrodynamic interaction between a wave and ridge affects marine environment. This study analyzes the effects of ridge height and potential energy during wave-ridge interaction with a binary and cumulative logistic regression model. In testing the Global Null Hypothesis, all values are p<0.001, with three statistical methods, such as Likelihood Ratio, Score, and Wald. While comparing with two kinds of models, tests values obtained by cumulative logistic regression models are better than those by binary logistic regression models. Although this study employed cumulative logistic regression model, three probability functions 1, 2 and 3, are utilized for investigating the weighted influence of factors on wave reflection. Deviance and Pearson tests are applied to check the goodness-of-fit of the proposed model. The analytical results demonstrated that both ridge height (X1) and potential energy (X2) significantly impact (p<0.0001) the amplitude-based reflected rate; the P-values for the deviance and Pearson are all >0.05 (0.2839, 0.3438, respectively). That is, the goodness-of-fit between ridge height (X1) and potential energy (X2) can further predict parameters under the scenario of the best parsimonious model.Investigation of 6 predictive powers (R2, Max-rescaled R2, Somers'D, Gamma, Tau-a, and c, respectively) indicate that these predictive estimates of the proposed model have better predictive ability than ridge height alone, and are very similar to the interaction of ridge height and potential energy. It can be concluded that the goodness-of-fit and prediction ability of the cumulative logistic regression model are better than that of the binary logistic regression model.  相似文献   

15.
Internal solitary wave propagation over a submarine ridge results in energy dissipation, in which the hydrodynamic interaction between a wave and ridge affects marine environment. This study analyzes the effects of ridge height and potential energy during wave-ridge interaction with a binary and cumulative logistic regression model. In testing the Global Null Hypothesis, all values are p<0.001, with three statistical methods, such as Likelihood Ratio, Score, and Wald. While comparing with two kinds of models, tests values obtained by cumulative logistic regression models are better than those by binary logistic regression models. Although this study employed cumulative logistic regression model, three probability functions 1, 2 and 3, are utilized for investigating the weighted influence of factors on wave reflection. Deviance and Pearson tests are applied to check the goodness-of-fit of the proposed model. The analytical results demonstrated that both ridge height (X1) and potential energy (X2) significantly impact (p<0.0001) the amplitude-based reflected rate; the P-values for the deviance and Pearson are all >0.05 (0.2839, 0.3438, respectively). That is, the goodness-of-fit between ridge height (X1) and potential energy (X2) can further predict parameters under the scenario of the best parsimonious model.Investigation of 6 predictive powers (R2, Max-rescaled R2, Somers''D, Gamma, Tau-a, and c, respectively) indicate that these predictive estimates of the proposed model have better predictive ability than ridge height alone, and are very similar to the interaction of ridge height and potential energy. It can be concluded that the goodness-of-fit and prediction ability of the cumulative logistic regression model are better than that of the binary logistic regression model.  相似文献   

16.
Logit regression analysis is widely applied in scientific studies and laboratory experiments, where skewed observations on a data set are often encountered. A number of problems with this method, for example, oudiers and influential observations, can cause overdispersion when a model is fitted. In this study a systematic statistical approach, including the plotting of several indices is used to diagnose the lack-of-fit of a logistic regression model. The outliers and influential observations on data from laboratory experiments are then detected. Specifically we take account of the interaction of an internal sohtary wave (ISW) with an obstacle, i.e., an underwater ridge, and also analyze the effects of the ridge height, the lower layer water depth, and the potential energy on the amplitude-based transmission rate of the ISW. As concluded, the goodness-of-fit of the revised logit regression model is better than that of the model without this approach.  相似文献   

17.
为解决多传感器水下目标纯方位跟踪中的传感器测量衰减问题,建立水下目标静态多传感器纯方位跟踪模型,将传感器测量衰减建模为统计特性已知的随机变量,基于融合中心接收到的各水声传感器的原始测量值,设计了一种集中式状态估计器结构,利用最小方差方法推导出最优的集中式目标状态估计增益。通过算例仿真可以得出,所提出的算法能够在水声传感器不做机动的前提下跟踪目标,弥补了单个水声传感器观测性不足的缺点,对比传统的集中式Kalman估计器,具有更高的精度,能够有效解决传感器测量衰减问题。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号