首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Although all of the main properties of a ground motion cannot be captured through a single parameter, a number of different engineering parameters has been proposed that are able to reflect either one or more ground‐motion characteristics concurrently. For many of these parameters, especially regarding Greece, there are relatively few or no predictive models. In this context, we present a set of new regionally‐calibrated equations for the prediction of the geometric mean of the horizontal components of 10 amplitude‐, frequency response‐, and duration‐based parameters for shallow crustal earthquakes. These equations supersede previous empirical relationships for Greece since their applicability range for magnitude, and epicentral distance has been extended down to Mw 4 and up to 200 km, respectively, the incorporation of a term accounting for anelastic attenuation has been investigated, while their development was based on a ground‐motion dataset spanning from 1973 to 2014. For all ground‐motion parameters, we provide alternative optimal equations relative to the availability of information on the different explanatory variables. In all velocity‐based and contrary to the acceleration‐based parameters, the anelastic attenuation coefficient was found statistically insignificant when it was combined with the geometric decay and the coefficient accounting for saturation with distance. In the regressions where the geometric decay coefficient simultaneously incorporated the contribution of anelastic attenuation, its increase was found to be much less considerable in the velocity‐based than in the acceleration‐based parameters, implying a stronger effect of anelastic attenuation on the parameters that are defined via the acceleration time history.  相似文献   

2.
Best estimate seismic analysis are generally based on time‐domain simulations of structural responses. The seismic load is then modeled by a stochastic process representing ground motion. For this purpose, the analyst can use recorded accelerograms or work with synthetically generated ones. The number of ground motion time‐histories available for a given scenario and site condition is limited and generally not sufficient for carrying out more advanced probabilistic structural response analysis. It is then necessary to have at our disposal methods that allow for generating synthetic accelerograms that realistically characterize earthquake ground motions. However, most of the methods proposed in literature for generating synthetic accelerograms do not accurately reproduce the natural variability of ground motion parameters (such as PGA, cumulative absolute velocity, and Arias intensity) observed for recorded time histories. In this paper, we introduce a new method for generating synthetic ground motion, based on Karhunen‐Loève decomposition and a non‐Gaussian stochastic model. The proposed method enables the structural analyst to simulate ground motion time histories featuring the properties mentioned above. To demonstrate its capability, we study the influence of the simulation method on different ground motion parameters and on soil response spectra. We finally compute fragility curves to illustrate the practical application of the proposed method. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

3.
During the recent earthquakes in Japan and the U.S.A. a number of records from liquefied‐soil sites have been obtained. The ground motion parameters from these sites were studied and several methods for detection of liquefaction from seismic records were developed. The methods, however, focus mainly on the horizontal ground motion and may interpret as liquefaction‐induced some records from soft‐soil deposits or records with dominant surface waves, at which sites the phenomenon was not observed. Besides, not all of the available records from liquefied sites were processed. In this paper, after examination of the ability of different types of ground motion parameters to indicate alone soil liquefaction we propose a new liquefaction detection method that simultaneously analyses instantaneous frequency content of the horizontal and the vertical ground acceleration. We also compare performance of the proposed method with that of the other liquefaction detection methods. The computations are carried out using a common data set including records from liquefied and non‐liquefied sites. Results show that the frequency‐related parameters and the proposed method detect more efficiently the occurrence of liquefaction from the seismic records. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

4.
A previously developed simplified model of ground motion amplification is applied to the simulation of acceleration time histories at several soft‐soil sites in the Valley of Mexico, on the basis of the corresponding records on firm ground. The main objective is to assess the ability of the model to reproduce characteristics such as effective duration, frequency content and instantaneous intensity. The model is based on the identification of a number of parameters that characterize the complex firm‐ground to soft‐soil transfer function, and on the adjustment of these parameters in order to account for non‐linear soil behavior. Once the adjusted model parameters are introduced, the statistical properties of the simulated and the recorded ground motions agree reasonably well. For the sites and for the seismic events considered in this study, it is concluded that non‐linear soil behavior may have a significant effect on the amplification of ground motion. The non‐linear soil behavior significantly affects the effective ground motion duration for the components with the higher intensities, but it does not have any noticeable influence on the lengthening of the dominant ground period. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

5.
Seismic performance of structures is related to the damage inflicted on the structure by the earthquake, which means that formulation of performance‐based design is inherently coupled with damage assessment of the structure. Although the potential for cumulative damage during a long‐duration earthquake is generally recognized, most design codes do not explicitly take into account the damage potential of such events. In this paper, the classical low‐cycle fatigue model commonly used for seismic damage assessment is cast in a framework suitable for incorporating cumulative damage into seismic design. The model, in conjunction with a seismic input energy spectrum, may be used to establish an energy‐based seismic design. In order to ensure satisfactory performance in a structure, the cyclic plastic strain energy capacity of the structure is designed to be larger than or equal to the portion of seismic input energy contributing to cumulative damage. The resulting design spectrum, which depends on the duration of the ground motion, indicates that the lateral strength of the structure must be increased in order to compensate for the increased damage due to an increased number of inelastic cycles that occur in a long‐duration ground motion. Examples of duration‐dependent inelastic design spectra are developed using parameters currently available for the low‐cycle fatigue model. The resulting spectra are also compared with spectra developed using a different cumulative damage model. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

6.
In this paper the effects of near‐fault earthquakes are investigated through the study of parameters related to both input energy and plastic cycles demand. Based on the results of two different regression analyses performed with 128 near‐fault and 122 far‐field registrations, respectively, the Cosenza and Manfredi adimensional Id index was found to be the best seismological parameter correlated to the number n and amplitude m of plastic cycles in the vicinity of the source as well as far from it. Analytical formulations for n,m and for the equivalent number of plastic cycles neq are proposed for near‐fault and far‐field regions. The study of Id and neq shows the tendency of such parameters to increase as the distance increases. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

7.
Ground motion duration effects on nonlinear seismic response   总被引：1，自引：0，他引：1  
The study presented in this paper addresses the question of which nonlinear demand measures are sensitive to ground motion duration by statistical analyses of several case studies. A number of single degree of freedom (SDOF) structures were selected considering: (1) four oscillation periods; (2) three evolutionary and non‐evolutionary hysteretic behaviours; (3) two target ductility levels. Effects of duration are investigated, by nonlinear dynamic analysis, with respect to six different demand indices ranging from displacement ductility ratio to equivalent number of cycles. Input is made of six real accelerogram sets representing three specific duration scenarios (small, moderate and large duration). For all considered demand quantities time‐history results are formally compared by statistical hypothesis test to asses the difference, if any, in the demand concerning different scenarios. Incremental dynamic analysis curves are used to evaluate duration effect as function of ground motion intensity (e.g. spectral acceleration corresponding to the SDOF's oscillation period). Duration impact on structural failure probability is evaluated by fragility curves. The results lead to the conclusion that duration content of ground motion is statistically insignificant to displacement ductility and cyclic ductility demand. The conclusions hold regardless of SDOF's period and hysteretic relationship investigated. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

8.
This study evaluates the effect of considering ground motion duration when selecting hazard‐consistent ground motions for structural collapse risk assessment. A procedure to compute source‐specific probability distributions of the durations of ground motions anticipated at a site, based on the generalized conditional intensity measure framework, is developed. Targets are computed for three sites in Western USA, located in distinct tectonic settings: Seattle, Eugene, and San Francisco. The effect of considering duration when estimating the collapse risk of a ductile reinforced concrete moment frame building, designed for a site in Seattle, is quantified by conducting multiple stripe analyses using groups of ground motions selected using different procedures. The mean annual frequency of collapse (λcollapse) in Seattle is found to be underestimated by 29% when using typical‐duration ground motions from the PEER NGA‐West2 database. The effect of duration is even more important in sites like Eugene (λcollapse underestimated by 59%), where the seismic hazard is dominated by large magnitude interface earthquakes, and less important in sites like San Francisco (λcollapse underestimated by 7%), where the seismic hazard is dominated by crustal earthquakes. Ground motion selection procedures that employ causal parameters like magnitude, distance, and Vs30 as surrogates for ground motion duration are also evaluated. These procedures are found to produce poor fits to the duration and response spectrum targets because of the limited number of records that satisfy typical constraints imposed on the ranges of the causal parameters. As a consequence, ground motions selected based on causal parameters are found to overestimate λcollapse by 53%. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

9.
With the recent emergence of wavelet‐based procedures for stochastic analyses of linear and non‐linear structural systems subjected to earthquake ground motions, it has become necessary that seismic ground motion processes are characterized through statistical functionals of wavelet coefficients. While direct characterization in terms of earthquake and site parameters may have to wait for a few more years due to the complexity of the problem, this study attempts such characterization through commonly available Fourier and response spectra for design earthquake motions. Two approaches have been proposed for obtaining the spectrum‐compatible wavelet functionals, one for input Fourier spectrum and another for input response spectrum, such that the total number of input data points are 30–35% of those required for a time‐history analysis. The proposed methods provide for simulating ‘desired non‐stationary characteristics’ consistent with those in a recorded accelerogram. Numerical studies have been performed to illustrate the proposed approaches. Further, the wavelet functionals compatible with a USNRC spectrum in the case of 35 recorded motions of similar strong motion durations have been used to obtain the strength reduction factor spectra for elasto‐plastic oscillators and to show that about ±20% variation may be assumed from mean to 5 and 95% confidence levels due to uncertainty in the non‐stationary characteristics of the ground motion process. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

10.
A parameterized stochastic model of near‐fault ground motion in two orthogonal horizontal directions is developed. The major characteristics of recorded near‐fault ground motions are represented. These include near‐fault effects of directivity and fling step; temporal and spectral non‐stationarity; intensity, duration, and frequency content characteristics; directionality of components; and the natural variability of ground motions. Not all near‐fault ground motions contain a forward directivity pulse, even when the conditions for such a pulse are favorable. The proposed model accounts for both pulse‐like and non‐pulse‐like cases. The model is fitted to recorded near‐fault ground motions by matching important characteristics, thus generating an ‘observed’ set of model parameters for different earthquake source and site characteristics. A method to generate and post‐process synthetic motions for specified model parameters is also presented. Synthetic ground motion time series are generated using fitted parameter values. They are compared with corresponding recorded motions to validate the proposed model and simulation procedure. The use of synthetic motions in addition to or in place of recorded motions is desirable in performance‐based earthquake engineering applications, particularly when recorded motions are scarce or when they are unavailable for a specified design scenario. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

11.
王东升  陈笑宇  张锐  国巍 《地震学报》2022,44(5):824-844
近断层地震动中存在的低频、大幅值速度脉冲使得临近断层结构具有更高的强度和延性需求。对近断层地震动脉冲特性的深入研究有利于加深对临近断层结构反应的认识,从而为临近断层结构抗震设计提供理论依据。受强震记录处理及速度脉冲识别和提取方法的限制,目前已有的研究工作主要集中于近断层地震动记录的单脉冲特性,多脉冲特性涉及较少。本文基于希尔伯特-黄变换及其相关理论,针对近断层地震动,提出了涵盖原始强震记录基线校正,至多速度脉冲定量判别及提取的整套脉冲特性研究方法,该方法对多脉冲记录尤为有效;基于提取出的理想化速度脉冲构建了（多）脉冲参数与地震参数的统计关系;以脉冲持时新定义了近断层地震动的有效强震持时,并通过多层结构非线性时程分析进行了验证。新方法中,基线校正过程可以获得稳定的地面峰值位移（PGD）和具有物理意义的基线偏移时程;提出的速度脉冲识别及波形提取方法可以将每个脉冲准确定位于时域,同时自动化获得脉冲相关参数;基于理想脉冲定义的近断层地震动有效强震持时可以良好地 表征多脉冲记录的强度。   相似文献   

12.
The conventional approach of obtaining the inelastic response spectra for the aseismic design of structures involves the reduction of elastic spectra via response modification factors. A response modification factor is usually taken as a product of (i) strength factor, RS, (ii) ductility factor, Rμ, and (iii) redundancy factor, RR. Ductility factor, also known as strength reduction factor (SRF), is considered to primarily depend on the initial time period of the single‐degree‐of‐freedom (SDOF) oscillator and the displacement ductility demand ratio for the ground motion. This study proposes a preliminary scaling model for estimating the SRFs of horizontal ground motions in terms of earthquake magnitude, strong motion duration and predominant period of the ground motion, geological site conditions, and ductility demand ratio, with a given level of confidence. The earlier models have not considered the simultaneous dependence of the SRFs on various governing parameters. Since the ductility demand ratio is not a complete measure of the cumulative damage in the structure during the earthquake‐induced vibrations, the existing definition of the SRF is sought to be modified with the introduction of damage‐based SRF (in place of ductility‐based SRF). A parallel scaling model has been proposed for estimating the damage‐based SRFs. This model considers damage and ductility supply ratio as parameters instead of ductility demand ratio. Through a parametric study on ductility‐based SRFs, it has been shown that the hitherto assumed insensitivity of earthquake magnitude and strong motion duration may not be always justified and that the initial time period of the oscillator plays an important role in the dependence of SRF on these parameters. Further, the damage‐based SRFs are found to show similar parametric dependence as observed in the case of the ductility‐based SRFs. Copyright © 2000 John Wiley & Sons, Ltd.  相似文献   

13.
Fragility curves are generally developed using a single parameter to relate the level of shaking to the expected structural damage. The main goal of this work is to use several parameters to characterize the earthquake ground motion. The fragility curves will, therefore, become surfaces when the ground motion is represented by two parameters. To this end, the roles of various strong‐motion parameters on the induced damage in the structure are compared through nonlinear time‐history numerical calculations. A robust structural model that can be used to perform numerous nonlinear dynamic calculations, with an acceptable cost, is adopted. The developed model is based on the use of structural elements with concentrated nonlinear damage mechanics and plasticity‐type behavior. The relations between numerous ground‐motion parameters, characterizing different aspects of the shaking, and the computed damage are analyzed and discussed. Natural and synthetic accelerograms were chosen/computed based on a consideration of the magnitude‐distance ranges of design earthquakes. A complete methodology for building fragility surfaces based on the damage calculation through nonlinear numerical analysis of multi‐degree‐of‐freedom systems is proposed. The fragility surfaces are built to represent the probability that a given damage level is reached (or exceeded) for any given level of ground motion characterized by the two chosen parameters. The results show that an increase from one to two ground‐motion parameters leads to a significant reduction in the scatter in the fragility analysis and allows the uncertainties related to the effect of the second ground‐motion parameter to be accounted for within risk assessments. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

14.
The sensitivity of seismic energy dissipation to ground motion and system characteristics is assessed. It is found that peak ground acceleration, peak ground velocity to acceleration (V/A), dominant period of ground excitation and effective response duration are closely correlated with the energy dissipated by a SDOF system. Ductility ratio and damping ratio have no significant influence on the energy dissipation. An energy dissipation index is proposed for measuring the damage potential of earthquake ground motion records which includes the effects of basic excitation and response characteristics contributing to the seismic energy dissipation. The proposed index is compared with several intensity measures for the set of 94 ground motion records considered in the study.  相似文献   

15.
A number of methods have been proposed that utilize the time‐domain transformations of frequency‐dependent dynamic impedance functions to perform a time‐history analysis. Though these methods have been available in literature for a number of years, the methods exhibit stability issues depending on how the model parameters are calibrated. In this study, a novel method is proposed with which the stability of a numerical integration scheme combined with time‐domain representation of a frequency‐dependent dynamic impedance function can be evaluated. The method is verified with three independent recursive parameter models. The proposed method is expected to be a useful tool in evaluating the potential stability issue of a time‐domain analysis before running a full‐fledged nonlinear time‐domain analysis of a soil–structure system in which the dynamic impedance of a soil–foundation system is represented with a recursive parameter model. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

16.
In damage‐based seismic design it is desirable to account for the ability of aftershocks to cause further damage to an already damaged structure due to the main shock. Availability of recorded or simulated aftershock accelerograms is a critical component in the non‐linear time‐history analyses required for this purpose, and simulation of realistic accelerograms is therefore going to be the need of the profession for a long time to come. This paper attempts wavelet‐based simulation of aftershock accelerograms for two scenarios. In the first scenario, recorded main shock and aftershock accelerograms are available along with the pseudo‐spectral acceleration (PSA) spectrum of the anticipated main shock motion, and an accelerogram has been simulated for the anticipated aftershock motion such that it incorporates temporal features of the recorded aftershock accelerogram. In the second scenario, a recorded main shock accelerogram is available along with the PSA spectrum of the anticipated main shock motion and PSA spectrum and strong motion duration of the anticipated aftershock motion. Here, the accelerogram for the anticipated aftershock motion has been simulated assuming that temporal features of the main shock accelerogram are replicated in the aftershock accelerograms at the same site. The proposed algorithms have been illustrated with the help of the main shock and aftershock accelerograms recorded for the 1999 Chi–Chi earthquake. It has been shown that the proposed algorithm for the second scenario leads to useful results even when the main shock and aftershock accelerograms do not share the same temporal features, as long as strong motion duration of the anticipated aftershock motion is properly estimated. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

17.
A study of the duration of strong ground motion using accelerometric data of subduction and normal‐faulting Mexican earthquakes is presented. Duration is obtained based on the time between 2.5 and 97.5 per cent of the Arias intensity. An expression to predict this duration in terms of the magnitude, distance to the rupture area and site period is proposed and compared with predictions available in the literature. The effect of large duration for very distant sites and the contribution of soft soils to the duration of strong ground motion are widely discussed. We have found that large magnitude not only yields long duration at the source, but also proportionally longer duration with distance and with dominant site period compared to small magnitude. The duration obtained from the regression is used as a parameter to obtain input and hysteretic energy and on the use of damage models available in the literature. Finally, duration is used together with the random vibration theory to predict response spectra. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

18.
Several new empirical equations of the frequency dependent duration of strong earthquake ground motion are presented. The duration is considered as being composed of two parts: (1) the duration of stong motion as it is observed at recording stations located on basement rocks, and (2) the prolongation of this duration for stations located on sediments. The first part, called the ‘basic duration’, is modelled in terms of the Modified Mercalli intensity and (in some cases) the hypocentral distance. The depth of the sediments under the station, the distance from the station to the rocks surrounding it, and the angular measure of the size of those rocks (as seen from the station) are chosen as the parameters for modelling the prolongation of the duration. The new empirical equations are compared (a) with each other, (b) with our previous models which used similar ‘prolongation’ terms, but the ‘basic duration’ was expressed in terms of the magnitude of the earthquake and the source-to-station distance, and (c) with models with ‘intensity-type’ ‘basic duration’, but with a simplified ‘prolongation’ term (the geological conditions at the stations are modeled by lumping all the sites into three groups: basement rock, sediments and intermediate geology). This collection of models is found to have good internal consistency. The choice of the proper model depends on the availability of the earthquake and site parameters. The residuals of the empirical regression equations are found to have similar distribution functions for all the models. An explicit functional form for such distributions is proposed, and the frequency dependent coefficients are found for all the models of duration. This allows one to predict (for each set of earthquake and site parameters) the probability of exceedance of any given level of duration of strong ground motion at a given frequency.  相似文献   

19.
A shift approach is presented for evaluating and interpreting the response of rigid‐perfectly plastic single‐degree‐of‐freedom systems to dynamic loading. Scaling laws for such systems are, as the term suggests, multiplicative in nature, relating peak dynamic response to products of key problem parameters such as linear spectral coordinates, force reduction coefficient and peak values of the excitation and its time derivatives. Contrary to classical laws, the proposed approach is additive, imposing a shift in the ordinates and the abscissa of the excitation function by means of a set of parameters uniquely related to the yielding resistance of the system. The dynamic response is then obtained by integrating the modified excitation function in a linear‐like manner within a particular yielding branch, for the nonlinearity is incorporated into the forcing term. The mathematical validity of the approach is demonstrated analytically and its importance is highlighted for systems with symmetric yielding resistance subjected to near‐fault earthquake motions. The modified excitation function may be discontinuous between different yielding branches and relates uniquely to the development of plastic deformation. It is thereby referred to as Plastic Input Motion (PIM). It is shown that the ordinates and the duration of this function may be significantly (yet not necessarily) smaller than those of the original ground motion depending on yield strength. The relationship of the proposed approach to the existing methods and parameters of earthquake engineering such as Newmark's sliding block and relative ground acceleration, is discussed. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

20.
This short communication introduces a quantitative approach for the engineering validation of ground‐motion simulations based on information theory concepts and statistical hypothesis testing. Specifically, we use the Kullback‐Leibler divergence to measure the similarity of the probability distributions of recorded and simulated ground‐motion intensity measures (IMs). We demonstrate the application of the proposed validation approach to ground‐motion simulations computed by using a variety of methods, including Graves and Pitarka hybrid broadband, the deterministic composite source model, and a stochastic white noise finite‐fault model. Ground‐motion IMs, acting as proxies for the (nonlinear) seismic response of more complex engineered systems, are considered herein to validate the considered ground‐motion simulation methods. The list of considered IMs includes both spectral‐shape and duration‐related proxies, shown to be the optimal IMs in several probabilistic seismic demand models of different structural types, within the framework of performance‐based earthquake engineering. The proposed validation exercise (1) can highlight the similarities and differences between simulated and recorded ground motions for a given simulation method and/or (2) allow the ranking of the performance of alternative simulation methods. The similarities between records and simulations should provide confidence in using the simulation method for engineering applications, while the discrepancies should help in improving the tested method for the generation of synthetic records.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号