首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The strongest evidence up to date for a subduction zone in the Hellenic region is a clearly identified Wadati-Benioff zone below the central Aegean Sea, to a maximum depth of 180 km. Alternative seismic tomography models suggest that subduction process continues deeper than the Wadati-Benioff zone to a maximum depth of at least 600 km. So far the lack of deep electrical studies in the region impeded scientists from imposing other control factors than seismic to the proposed models for the Hellenic Subduction Zone (HSZ). A Long Period Magnetotelluric (LMT) study was carried out in the southern part of the Greek mainland to study the deep electrical characteristics of the HSZ and examine whether prominent modelled features correlate with structures identified by the seismic methods. The study comprised collection, processing and modelling of magnetotelluric (MT) data in the period range 100–10000 s from ten sites located along a 250 km NE–SW trending profile. The dimensionality of the data was examined at a pre-modelling stage and it was found that they do not exhibit three-dimensional (3-D) features. The latter enabled to construct both one-dimensional (1-D) and two-dimensional (2-D) models. The proposed geoelectric model for HSZ was based on 2-D modelling, since it had better maximum depth resolution of about 400 km, and revealed structures not detected by 1-D modelling attempts. The model structure which was related to the African and Euro-Asian lithosphere is relatively resistive (> 800 Ω-m) and has an average thickness of 150–170 km. Although the bottom of the lithosphere is adequately resolved, the Wadati-Benioff zone that delineates the top of the subducting lithospheric slab is not identified by any electrical feature. The modelled structure associated with the subducting part of the African lithosphere penetrates a relatively conductive (< 200 Ω-m) asthenosphere with a dip angle of 42°. Intermediate electrical resistivities (200–800 Ω-m) are attributed to the ascending melting part of the lithosphere below the region of the Hellenic Volcanic Arc (HVA) and to a dipping zone below the south-western part of the profile, at 170–220 km depths.  相似文献   

2.
A cross-section of earthquakes located in northeastern Japan is presented by using pPdepths reported by the International Seismological Centre. Travel-time corrections for the water layer were used to recompute pP-depths of earthquakes located below the sea regions. Seven new focal-mechanism solutions, based on teleseismic and Japanese data, were determined for this region. The reconstructed cross-section shows a double seismic zone at intermediate depths of 80–150 km. Earthquakes located within the upper seismic plane are characterized by down-dip compression while those in the lower plane, located about 35 km below the other seismic plane, are characterized by down-dip extension. These observations suggest that, at these depths, stresses attributable to a simple “unbending” of a plate may contribute to the generation of earthquakes in addition to stresses generated by the gravitational sinking of the lithosphere. A detailed cross-section of shallow earthquakes in the same area between the trench and eastern coast of northeastern Honshu is presented along with focal-mechanism solutions. This cross-section delineates more clearly the seismic zones characterized by normal and low-angle thrust faulting.  相似文献   

3.
The Pamir-Hindu Kush region at the western end of the Himalayan-Tibet orogen is one of the most active regions on the globe with strong seismicity and deformation and provides a window to evaluate continental collision linked to two intra-continental subduction zones with different polarities. The seismicity and seismic tomography data show a steep northward subducting slab beneath the Hindu Kush and southward subducting slab under the Pamir. Here, we collect seismic catalogue with 3988 earthquake events to compute seismicity images and waveform data from 926 earthquake events to invert focal mechanism solutions and stress field with a view to characterize the subducting slabs under the Pamir-Hindu Kush region. Our results define two distinct seismic zones: a steep one beneath the Hindu Kush and a broad one beneath the Pamir. Deep and intermediate-depth earthquakes are mainly distributed in the Hindu Kush region which is controlled by thrust faulting, whereas the Pamir is dominated by strike-slip stress regime with shallow and intermediate-depth earthquakes. The area where the maximum principal stress axis is vertical in the southern Pamir corresponds to the location of a high-conductivity low-velocity region that contributes to the seismogenic processes in this region. We interpret the two distinct seismic zones to represent a double-sided subduction system where the Hindu Kush zone represents the northward subduction of the Indian plate, and the Pamir zone shows southward subduction of the Eurasian plate. A transition fault is inferred in the region between the Hindu Kush and the Pamir which regulates the opposing directions of motion of the Indian and Eurasian plates.  相似文献   

4.
The Indian subcontinent has been colliding against Asia along the Himalayas. Hindu Kush and Burma in this collision zone have intermediate-depth seismicities beneath them, with most of the continental crust subducted into a few hundred km depth. The subduction, not collision, in these regions is an enigma long time. We show that the continental lithosphere subducted beneath Hindu Kush and Burma traveled over the Reunion and Kerguelen hotspots from 100 Ma to 126 Ma and is likely to have been metasomatized by upwelling plumes beneath those hotspots. The devolatilization of the metasomatized lithosphere impinging on the collision boundary would have provided a high pore fluid pressure ratio at the thrust zones and made the subduction of the continental lithosphere in these regions possible. The subducted lithosphere could give intermediate-depth seismicities by devolatilization embrittlement. Such subduction of hotspot-affected lithosphere without accompanying any oceanic plate would be one candidate for producing ultrahigh-pressure metamorphic rocks by deep subduction of the continental crust.  相似文献   

5.
New deep seismic reflection data provide images of the crust and uppermost mantle underlying the eastern Middle Urals and adjacent West Siberian Basin. Distinct truncations of reflections delineate the late-orogenic strike-slip Sisert Fault extending vertically to ∼28 km depth, and two gently E-dipping reflection zones, traceable to 15–18 km depth, probably represent normal faults associated with the opening of the West Siberian Basin. A possible remnant Palaeozoic subduction zone in the lower crust under the West Siberian Basin is visible as a gently SW-dipping zone of pronounced reflectivity truncated by the Moho. Continuity of shallow to intermediate-depth reflections suggest that Palaeozoic accreted island-arc terranes and overlying molasse sequences exposed in the hinterland of the Urals form the basement for Triassic and younger deposits in the West Siberian Basin. A highly reflective lower crust overlies a transparent mantle at about 43 km depth along the entire 100 km long seismic reflection section, suggesting that the lower crust and Moho below the eastern Middle Urals and West Siberian Basin have the same origin.  相似文献   

6.
On the first of January 1992, unusual earthquake activity started in Steigen, northern Norway. By 31 December, 1992, a total of 207 events had been recorded in several pulses. Among these, several events with magnitudes larger than 3.0 ( M c) were also felt by the people. The epicentral distribution of these events seems to suggest that they all are concentrated in a small region (approximately 10 km in diameter) in the Brennvika Bay (67.8°N, 14.9°E), between Leinesfjorden in the north and Nordfolda in the south. The distribution of events in time is characteristic of a swarm in which no dear evidence of a mainshock–aftershock sequence was observed. Macroseismic intensity surveys as well as synthetic modelling indicate shallow focal depths in the range 5–8 km. Based on a composite focal mechanism, indicating an oblique-slip fault striking NE with a normal component dipping NW, combined with an observed NE trend in the epicentres and the focal depths, these events correlate with a previously proposed fault zone along Nordfolda. The NE trend has been dominant in the area throughout geological time, starting from the Caledonian Orogeny to the post-Caledonian basin developments, as well as the post-glacial and neotectonic structural features. At present, the deep-seated structural anomaly underneath the Lofoten Ridge seems to be the major factor controlling the structural trends in the area. The activity along the Nordfolda fault zone could be related to this large-scale structure, although the causes of the stresses that would create the seismic activity are not very clear, as there are several possible stress-generating mechanisms involved, such as post-glacial uplift of the land masses, the 'ridge-push' effect from Mohn's Ridge, and vertical stresses generated by the sediment loading in the adjacent basins.  相似文献   

7.
Travel times from earthquakes recorded at two seismic networks were used to derive an average P wavespeed model for the crust and upper mantle to depths of 320 km below southern Africa. The simplest model (BPI1) has a Moho depth of 34 km, and an uppermost mantle wavespeed of 8.04 km/s, below which the seismic wavespeeds have low positive gradients. Wavespeed gradients decrease slightly around 150 km depth to give a ‘knee’ in the wavespeed-depth model, and the wavespeed reaches 8.72 km/s at a depth of 320 km. Between the Moho and depths of 270 km, the seismic wavespeeds lie above those of reference model IASP91 of Kennett [Research School of Earth Sciences, Australian National University, Canberra, Australia (1991)] and below the southern African model of Zhao et al. [Journal of Geophysical Research 104 (1999) 4783]. At depths near 300 km all three models have similar wavespeeds. The mantle P wavespeeds for southern Africa of Qiu et al. [Geophysical Journal International 127 (1996) 563] lie close to BPI1 at depths between 40 and 140 km, but become lower at greater depths. The seismic wavespeeds in the upper mantle of model BPI1 agree satisfactorily with those estimated from peridotite xenoliths in kimberlites from within the Kaapvaal craton.The crustal thickness of 34 km of model BPI1 is systematically lower than the average thickness of 41 km computed over the same region from receiver functions. This discrepancy can be partly explained by an alternative model (BPI2) in which there is a crust–mantle transition zone between depths of 35 and 47 km, below which seismic wavespeed increases to 8.23 km/s. A low-wavespeed layer is then required at depths between 65 and 125 km.  相似文献   

8.
Temporary local seismic networks were installed in western Crete, in central Crete, and on the island Gavdos south of western Crete, respectively, in order to image shallow seismically active zones of the Hellenic subduction zone.More than 4000 events in the magnitude range between −0.5 and 4.8 were detected and localized. The resulting three-dimensional hypocenter distribution allows the localization of seismically active zones in the area of western and central Crete from the Mediterranean Ridge to the Cretan Sea. Furthermore, a three-dimensional structural model of the studied region was compiled based on results of wide-angle seismics, surface wave analysis and receiver function studies. The comparison of the hypocenter distribution and the structure has allowed intraplate and interplate seismicity to be distinguished.High interplate seismicity along the interface between the subducting African lithosphere and the Aegean lithosphere was found south of western Crete where the interface is located at about 20 to 40 km depth. An offset between the southern border of the Aegean lithosphere and the southern border of active interplate seismicity is observed. In the area of Crete, the offset varies laterally along the Hellenic arc between about 50 and 70 km.A southwards dipping zone of high seismicity within the Aegean lithosphere is found south of central Crete in the region of the Ptolemy trench. It reaches from the interface between the plates at about 30 km depth towards the surface. In comparison, the Aegean lithosphere south of western Crete is seismically much less active including the region of the Ionian trench. Intraplate seismicity within the Aegean plate beneath Crete and north of Crete is confined to the upper about 20 km. Between 20 and 40 km depth beneath Crete, the Aegean lithosphere appears to be seismically inactive. In western Crete, the southern and western borders of this aseismic zone correlate strongly with the coastline of Crete.  相似文献   

9.
The large-scale POLONAISE'97 seismic experiment investigated the velocity structure of the lithosphere in the Trans-European Suture Zone (TESZ) region between the Precambrian East European Craton (EEC) and Palaeozoic Platform (PP). In the area of the Polish Basin, the P-wave velocity is very low (Vp <6.1 km/s) down to depths of 15–20 km, and the consolidated basement (Vp5.7–5.8 km/s) is 5–12 km deep. The thickness of the crust is 30 km beneath the Palaeozoic Platform, 40–45 km beneath the TESZ, and 40–50 km beneath the EEC. The compressional wave velocity of the sub-Moho mantle is >8.25 km/s in the Palaeozoic Platform and 8.1 km/s in the Precambrian Platform. Good quality record sections were obtained to the longest offsets of about 600 km from the shot points, with clear first arrivals and later phases of waves reflected/refracted in the lower lithosphere. Two-dimensional interpretation of the reversed system of travel times constrains a series of reflectors in the depth range of 50–90 km. A seismic reflector appears as a general feature at around 10 km depth below Moho in the area, independent of the actual depth to the Moho and sub-Moho seismic velocity. “Ringing reflections” are explained by relatively small-scale heterogeneities beneath the depth interval from 90 to 110 km. Qualitative interpretation of the observed wave field shows a differentiation of the reflectivity in the lower lithosphere. The seismic reflectivity of the uppermost mantle is stronger beneath the Palaeozoic Platform and TESZ than the East European Platform. The deepest interpreted seismic reflector with zone of high reflectivity may mark a change in upper mantle structure from an upper zone characterised by seismic scatterers of small vertical dimension to a lower zone with vertically larger seismic scatterers, possible caused by inclusions of partial melt.  相似文献   

10.
Deep seismic investigation carried out in Russia in long-range profiles with peaceful nuclear explosions allowed clarifying in details the structure of the upper mantle and the transition zone down to the depth of 700 km within the huge territory of old and young platforms of Northern Eurasia. Variability of horizontal heterogeneity of the upper mantle depending on the depth serves to qualitative estimation of its rheological properties. The upper part of the mantle to the depth of 80–100 km is characterized by the block structure with significant velocity steps of seismic waves at the blocks often divided by deep faults. This is the most rigid part of lithosphere. Below 100 km horizontal heterogeneity is insignificant, i.e., at these depths the substance is more plastic and not capable to retain block structure. On the lithosphere bottom at the depth of 200–250 km plasticity increase is observed as well but the zone of the lower velocities that might have been bound with the area of partial melting (asthenosphere) has not been found. These three layers with different rheological properties are divided by seismic boundaries presented by thin layering zones with alternating higher and lower velocities. At the specified depths any phase boundaries have been distinguished. These thin layering zones are assumed to form due to higher concentration of deep fluids at some levels of depths where mechanical properties and permeability of substance change. Insignificant number of fluids may result in appearance of streaks with partial or film melting at relatively low temperature—to the rise of the weakened zones where subhorizontal shifts are possible. According to seismic data in many world regions seismic boundaries are also observed at the depth of about 100 and 200 km; they may be globally spread. There are signs that areas of xenoliths formation and earthquake concentration, i.e., zones of high deformations, are confined to these depths.  相似文献   

11.
Seismogenesis of aftershocks occurring in the Kachchh seismic zone for more than last 10?years is investigated through modeling of fractal dimensions, b-value, seismic velocities, stress inversion, and Coulomb failure stresses, using aftershock data of the 2001 Bhuj earthquake. Three-dimensional mapping of b-values, fractal dimensions, and seismic velocities clearly delineate an area of high b-, D-, and Vp/Vs ratio values at 15?C35?km depth below the main rupture zone (MRZ) of the 2001 mainshock, which is attributed to higher material heterogeneities in the vicinity of the MRZ or deep fluid enrichment due to the release of aqueous fluid/volatile CO2 from the eclogitisation of the olivine-rich lower crustal rocks. We notice that several aftershocks are occurred near the contacts between high (mafic brittle rocks) and low velocity regions while many of the aftershocks including the 2001 Bhuj mainshock are occurred in the zones of low velocity (low dVp, low dVs and large Vp/Vs) in the 15?C35?km depth range, which are inferred to be the fractured rock matrixes filled with aqueous fluid or volatiles containing CO2. Further support for this model comes from the presence of hydrous eclogitic layer at sub-lithospheric depths (34?C42?km). The depth-wise stress inversions using the P- and T-axes data of the focal mechanisms reveal an increase in heterogeneity (i.e., misfit) with an almost N?CS ??1 orientation up to 30?km depth. Then, the misfit decreases to a minimum value in the 30?C40?km depth range, where a 60o rotation in the ??1 orientation is also noticed that can be explained in terms of the fluid enrichment in that particular layer. The modeling of Coulomb failure stress changes (??CFS) considering three tectonic faults [i.e., NWF, GF, and Allah bund fault (ABF)] and the slip distribution of the 2001 mainshock on NWF could successfully explain the occurrences of moderate size events (during 2006?C2008) in terms of increase in positive ??CFS on GF and ABF. In a nutshell, we propose that the fluid-filled mafic intrusives are acting as stress accentuators below the Kachchh seismic zone, which generate crustal earthquakes while the uninterrupted occurrence of aftershocks is triggered by stress transfer and aqueous fluid or volatile CO2 flow mechanisms. Further, our results on the 3-D crustal seismic velocity structure, focal mechanisms, and b-value mapping will form key inputs for understanding wave propagation and earthquake hazard-related risk associated with the Kachchh basin.  相似文献   

12.
P.K. Khan   《Gondwana Research》2007,12(4):468-475
A high-resolution study was carried out under pre-seismic (i.e., static) and post-seismic stress fields (i.e., dynamic) in a space–time frame along the Nicobar–Sumatra margin. The study reveals that the descending lithosphere records minimum stress obliquity, predominant thrust movement, and down-dip least compressive stress axis under static stress field in northwest Sumatra (sector III). The imbalance between down-dip component of slab pull force and viscous resistive force possibly caused cyclic stress loading in compressive field around the flexing zone ( 25 km), and that undergone brittle failure through generation of mega-thrust event on 26th December' 2004. A sharp decrease in stress obliquity towards north (sector II), redressing of least compressive stress axes from horizontal to down-dip direction, and increasing thrust movements under dynamic stress field account for continued upward shortening of the lithosphere. The weak thinner zone (i.e., between  159 and  217 km depth), an age-discontinuity portion, possibly was collapsed through rapid enhancement of stress-induced weakening and strain localization following the 2004 Sumatra mega-shock. It is also well appreciated in the literature that such shallow disruption of the lithosphere is inevitable in the upper mantle, if the slab is weakened or broken there, and this phenomenon is not uncommon below the Sumatra.  相似文献   

13.
日本列岛下太平洋俯冲板块的精细结构   总被引：1，自引：0，他引：1  
尽管许多学者对日本列岛下的太平洋俯冲板块做了大量的研究,但板块内部的结构(比如板块厚度,板块内地震波速度随深度的变化以及洋壳的俯冲情况等)仍然不太清楚。利用日本地区密集台网收集到的中深和深发地震到时数据来探讨上述问题。采用三维射线追踪正演模拟法,首先利用333个远震计算得到了日本地区太平洋板块的厚度为85km;然后利用3283个地震(震源深度大于40km)的130227条P波到时进一步研究板块内部的精细结构。结果显示,沿深度方向6个地层段(间隔100km)内的速度扰动值分别为5.5%,4.0%,3.5%,2.5%,2.0%和6.0%,在40～500km范围内速度扰动随深度的增加而减小,这与温度随深度的变化情况相一致。当深度大于500km时,速度扰动突然增大到6.0%,分析认为该异常可能由发生在东亚大陆边缘下方的深发地震无法精确定位导致的。最后利用40～500km深度范围内的近震测试得到日本东北和北海道地区下方洋壳俯冲的深度均为110km,平均厚度分别为7.5km和5km,相对于一维模型的速度扰动分别为1%和-3%。这说明洋壳在俯冲到110km以深时,由于受温度和压力的影响,逐渐脱水、变质,直至与板块融合。通过分析震源与洋壳的位置关系,本研究认为北海道地区比东北地区下方的俯冲洋壳可能含有更多的流体(比如水),导致两地区洋壳内的速度相差如此之大。此外,因为日本南部与洋壳对应的区域多为海洋,观测台站较少,所以本研究无法测试得到该区域内的洋壳俯冲情况。  相似文献   

14.
The disastrous Mw 9.3(seismic moment 1.0×1030 dyn/cm) earthquake that struck northwest Sumatra on 26 December 2004 and triggered～30 m high tsunami has rejuvenated the quest for identifying the forcing behind subduction related earthquakes around the world.Studies reveal that the strongest part（elastic core） of the oceanic lithosphere lie between 20 and 60 km depth beneath the upper （～7 km thick） crustal layer,and compressive stress of GPa order is required to fail the rock-layers within the core zone.Here we present evidences in favor of an intraplate origin of mega-earthquakes right within the strong core part（at the interface of semi-brittle and brittle zone）,and propose an alternate model exploring the flexing zone of the descending lithosphere as the nodal area for major stress accumulation. We believe that at high confining pressure and elevated temperature,unidirectional cyclic compressive stress loading in the flexing zone results in an increase of material yield strength through strain hardening, which transforms the rheology of the layer from semi-brittle to near-brittle state.The increased compressive stress field coupled with upward migration of the neutral surface（of zero stress fields） under noncoaxial deformation triggers shear crack.The growth of the shear crack is initially confined in the near-brittle domain,and propagates later through the more brittle crustal part of the descending oceanic lithosphere in the form of cataclastic failure.  相似文献   

15.
中国大陆岩石圈厚度分布研究   总被引：11，自引：1，他引：10  
利用不同物理性质所估计的岩石圈厚度可能具有不同的地球动力学意义。大陆岩石圈等效弹性厚度往往只与岩石圈内部的某些岩层相关,因此它可能不代表一般意义上的岩石圈厚度。地震学岩石圈厚度虽然有较高的精度,但依赖于人为地对岩石圈的定义;并且其具有的短时间尺度效应决定了它与长时间尺度的岩石圈概念不一致。热学岩石圈厚度体现了长时间尺度上的岩石圈热学作用,因此其厚度定义的标准是较合理的。地震-热学岩石圈厚度研究利用地震波速反演得到的温度数据按照热学岩石圈标准来对岩石圈厚度进行研究,具有地震学和热学岩石圈厚度两者的优点,是较合理的对岩石圈厚度的估计。中国大陆地震-热学岩石圈厚度分布有如下特点:(1)中国东部岩石圈较薄,厚度约100 km,其中包括中国东北、中朝克拉通、扬子克拉通东部和华南造山带;(2)青藏高原和塔里木克拉通以南地区的厚度变化较大,厚度约在160~220 km;(3)三大克拉通的岩石圈厚度有较大区别,扬子克拉通的核心最厚达约170 km,塔里木克拉通的核心厚度约140 km,中朝克拉通的厚度约100 km;(4)昆仑秦岭造山带的岩石圈上地幔内部较复杂,可能有大面积的部分熔融;(5)整个大陆岩石圈厚度分布并没有显示出与地壳年龄的线性相关关系,却表现出了与大地构造格局的直接关系。受板块碰撞强烈影响的地区,岩石圈较厚;受大洋俯冲带影响较强的地区,岩石圈较薄。  相似文献   

16.
To investigate subsurface structure and seismogenic layers, 3D velocity inversion was carried out in the source zone of 1905 Kangra earthquake (M8.0) in the northwestern Himalaya. P-wave and S-wave phase data of 159 earthquakes recorded by a network of 21 stations were used for this purpose. Inverted velocity tomograms up to a depth range of 18 km show significant variations of 14% in Vp and Vs and 6% in the Vp/Vs across the major tectonic zones in the region. Synthesis of seismicity pattern, velocity structure, distinctive focal mechanisms coupled with nature of stress distribution allows mapping of three different source regions that control regional seismotectonics. Accumulating strains are partly consumed by sliding of Chamba Nappe to the southwest through reverse-fault movements along Chamba/Panjal/Main Boundary Thrusts. This coupled with normal-fault type displacements along Chenab Normal Fault in the north account for low magnitude widespread seismicity in upper 8–10 km of the crust. At intermediate depths from 8 to 15 km, adjusting to residual compressive stresses, the detachment or lower end of the MBT slips to produce thrust dominated seismicity. Nucleation of secondary stresses in local NE–SW oriented structure interacts in complex manner with regional stresses to generate normal type earthquakes below the plane of detachment and therefore three seismic regimes at different depths produce intense seismicity in a block of 30 × 30 km2 centered NE to the epicenter of Kangra earthquake.  相似文献   

17.
Seabeam, seismic and submersible surveys took place during the Kaiko Project and revealed significant compressive deformation at the northeastern end of the Philippine Sea plate, related to the recent collision of the Izu-Ogasawara Arc against Central Japan. Intraoceanic thrusting at the base of the Zenisu Ridge, a linear topographic high running a few tens of kilometers south of the Nankai Trough, is supported by tectonic, magnetic and gravimetric data. We investigate the formation of the Zenisu Ridge in terms of compressive mechanical failure of a thin elastic-perfectly plastic plate, subducting at a trench and subject to a regional compressive axial force. The rheological envelope concept is used throughout the numerical calculations. Based on a detailed study of flexure of the present-day bending far from the deformation zone, we evaluate the bending forces involved: the bulge is 120 to 150 m high and the compressive stress all along the Nankai Trough is about −100 MPa. In the Zenisu Ridge area, an additional compressive stress is superimposed due to the nearby collision at Izu-Peninsula. We compute the vertical distribution of the deviatoric stress before failure and find that the deviatoric stress is maximum at a depth of 20–25 km in the trench area, and again at the surface 60 to 100 km seaward, in the vicinity of the bulge. The development of a thrust joining these two maxima through the entire thickness of the lithosphere is discussed. The model predicts that the formation of the Zenisu Ridge did not occur before 4 Ma and is caused by progressive tectonic uplift due to the redistribution of bending stresses as the ridge approaches the Nankai Trough.  相似文献   

18.
Modeling of the seismic, thermal, and density structure of the Siberian craton lithospheric mantle at depths of 100-300 km has been performed along the superlong Meteorite and Rift seismic profiles. The 2D velocity sections reflect the specific features of the internal structure of the craton: lateral inhomogeneities, seismic-boundary relief at depths of ~ 100, 150, 240, and 300 km, velocities of 8.3-8.7 km/s, and the lack of low-velocity zone in the lower lithosphere. Mapping of the thermal state along the Meteorite and Rift profiles shows a significant temperature decrease in the cratonic mantle as compared with the average temperatures of the surrounding Phanerozoic mantle (> 300 °C) estimated from the global reference model AK135. Lateral temperature variations, reflecting the thermal anomalies in the cratonic keel, are observed at depths of < 200 km (with some decrease in temperature in the central part of the craton), whereas at depths of > 200 km, temperature variations are negligible. This suggests the preservation of residual thermal perturbations at the base of the lithosphere, which must lead to the temperature equalization in the transition zone between the lithosphere and the asthenosphere. Variations in chemical composition have a negligible effect on the thermal state but affect strongly the density structure of the mantle. The results of modeling admit a significant fertilization of matter at depths more than 180-200 km and stratification of the cratonic mantle by chemical composition. The thicknesses of chemical (petrologic) and thermal boundary layers beneath the Siberian craton are estimated. The petrologic lithosphere is localized at depths of ~ 200 km. The bottom of the thermal boundary layer is close to the 1450 °C isotherm and is localized at a depth of 300 km, which agrees with heat flow and seismic-tomography data.  相似文献   

19.
New gravity data from the Adamawa Uplift region of Cameroon have been integrated with existing gravity data from central and western Africa to examine variations in crustal structure throughout the region. The new data reveal steep northeast-trending gradients in the Bouguer gravity anomalies that coincide with the Sanaga Fault Zone and the Foumban Shear Zone, both part of the Central African Shear Zone lying between the Adamawa Plateau and the Congo Craton. Four major density discontinuities in the lithosphere have been determined within the lithosphere beneath the Adamawa Uplift in central Cameroon using spectral analysis of gravity data: (1) 7–13 km; (2) 19–25 km; (3) 30–37 km; and (4) 75–149 km. The deepest density discontinuities determined at 75–149 km depth range agree with the presence of an anomalous low velocity upper mantle structure at these depths deduced from earlier teleseismic delay time studies and gravity forward modelling. The 30–37 km depths agree with the Moho depth of 33 km obtained from a seismic refraction experiment in the region. The intermediate depth of 20 km obtained within region D may correspond to shallower Moho depth beneath parts of the Benue and Yola Rifts where seismic refraction data indicate a crustal thickness of 23 km. The 19–20 km depths and 8–12 km depths estimated in boxes encompassing the Adamawa Plateau and Cameroon Volcanic Line may may correspond to mid-crustal density contrasts associated with volcanic intrusions, as these depths are less than depths of 25 and 13 km, respectively, in the stable Congo Craton to the south.  相似文献   

20.
In 1998–1999, a large-scale seismic array was deployed in Finland as a part of the EUROPROBE/SVEKALAPKO subproject, involving 14 European universities and research institutes. The objective of the project was to map the deep lithosphere structure and thickness beneath the Fennoscandian Shield by means of teleseismic events. In addition, about 580 local seismic events were registered during the data acquisition period. Among them, only eight local earthquakes were recorded, the rest being quarry blasts from mining sites in Russia, Finland, Estonia and Sweden. In this study, we present the analysis of the seismic wave field from the strongest local events registered by the majority of the stations of the SVEcofennian–KArelian–LAPland–KOla Transect (SVEKALAPKO) array with the aim of mapping the structure of the upper mantle beneath the array. For this purpose, we selected the events corresponding to a single source type and compared these recordings with those from wide-angle reflection and refraction experiments in the area to identify the regional phases. The record sections of selected events demonstrate strong reflections (PmP) from the Moho boundary. The refracted Pn phases can be seen as first arrivals at distances of about 200–400 km from the source. At offsets of about 400–800 km, phases reflected from inhomogeneities in the uppermost mantle (P1) and double reflections from the Moho boundary (PmPPmP) were recorded.Results from 2D forward ray trace modeling of reflected and refracted P-waves along four profile swathes from SVEKALAPKO stations demonstrate that the mantle reflections originate from two different groups of boundaries beneath the array: one group of phases arrive from subhorizontal and gently dipping reflectors below the Moho boundary at a depth of 70–90 km, while the other group are phases originating from a depth of 100 to 130 km. Based on the irregular character of the first group of reflections, their different spatial orientation and correlation with the Moho offsets, we interpret the boundaries of this group as relicts of ancient subduction and collision processes. The second group of reflections can be explained by a transition from mechanically strong to mechanically weak lithosphere.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号