首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
NE Iran, including the Kopeh Dagh and Allah Dagh-Binalud deformation domains, comprises the northeastern boundary of the Arabia–Eurasia collision zone. This study focuses on the evolution of the Plio-Quaternary tectonic regimes of northeast Iran. We present evidence for drastic temporal changes in the stress state by inversion of both geologically and seismically determined fault slip vectors. The inversions of fault kinematics data reveal distinct temporal changes in states of stress during the Plio-Quaternary (since ～ 5 Ma). The paleostress state is characterized by a regional transpressional tectonic regime with a mean N140 ± 10°E trending horizontal maximum stress axis (σ1). The youngest (modern) state of stress shows two distinct strike-slip and compressional tectonic regimes with a regional mean of N030 ± 15°E trending horizontal σ1. The change from the paleostress to modern stress states has occurred through an intermediate stress field characterized by a mean regional N trending σ1. The inversion analysis of earthquake focal mechanisms reveals a homogeneous, transpressional tectonic regime with a regional N023 ± 5°E trending σ1. The modern stress state, deduced from the youngest fault kinematics data, is in close agreement with the present-day stress state given by the inversions of earthquake focal mechanisms. According to our data and the deduced results, in northeast Iran, the Arabia–Eurasia convergence is taken up by strike-slip faulting along NE trending left-lateral and NNW trending right-lateral faults, as well as reverse to oblique-slip reverse faulting along NW trending faults. Such a structural assemblage is involved in a mechanically compatible and homogeneous modern stress field. This implies that no strain and/or stress partitioning or systematic block rotations have occurred in the Kopeh Dagh and Allah Dagh-Binalud deformation domains. The Plio-Quaternary stress changes documented in this paper call into question the extrapolation of the present-day seismic and GPS-derived deformation rates over geological time intervals encompassing tens of millions of years.  相似文献   

2.
Analysis of fault system in the high-P/T type Sambagawa metamorphic rocks of central Shikoku, southwest Japan, shows that conjugate normal faults pervasively developed in the highest-grade biotite zone (upper structural level) in three study areas (Asemi river, Oriu and Niihama areas). These conjugate normal faults consist of NE–SW to E–W striking and moderately north-dipping (set A), and NNW–SSE striking and moderately east dipping (set B) faults. The fault set A is dominant compared to the fault set B, and hence most of deformation is accommodated by the fault set A, leading to non-coaxial deformation. The sense of shear is inferred to be a top-to-the-WNW to NNW, based on the orientations of striation or quartz slickenfibre and dominant north-side down normal displacement. These transport direction by normal faulting is significantly different from that at D1 penetrative ductile flow (i.e. top-to-the-W to WNW). It has also been found that these conjugate normal faults are openly folded during the D3 phase about the axes trending NW–SE to E–W and plunging west at low-angles or horizontally, indicating that normal faulting occurred at the D2 phase. D2 normal faults, along which actinolite breccia derived from serpentinite by metasomatism sometimes occurs, perhaps formed under subgreenschist conditions (ca. 250 °C) in relation to the final exhumation of Sambagawa metamorphic rocks into the upper crustal level. The pervasive development of D2 normal faults in the upper structural level suggests that the final exhumation of Sambagawa metamorphic rocks could be caused by “distributed extension and normal faulting (removal of overburden)” in the upper crust.  相似文献   

3.
This work deals with structural and geochemical (chemical and isotopic) analyses of calcite veins hosted in Carrara marbles in the Alpi Apuane, NW Tuscany, Italy. Geometric features and spatial distribution of veins provided estimations of stress ratio (Φ = (σ2 − σ3)/(σ1 − σ3)), driving stress ratio (R′ = (Pf − σ3)/(σ1 − σ3)) and fluid overpressure (Δsi = Pf − σ3) at the time of vein formation. The obtained values of Φ = 32 and R′ = 0.43 reveal that fluid pressure was higher than the intermediate principal stress at the time of veins formation, whereas the estimated Δsi ranging from 129 to 207 MPa indicates that veins formed under supra-hydrostatic to lithostatic pressure conditions. Carbon (δ13CV-PDB = 1.81–2.10‰ for veins and 1.95–2.51‰ for host marbles), oxygen (δ18OV-SMOW = 28.71–29.57‰ for veins and 28.90–29.36‰ for host marbles) and strontium (87Sr/86Sr = 0.707716–0.707985 for veins and 0.0707708–0.707900 for host marbles) isotope compositions in vein/host marble pairs were internally quite consistent. Combining our structural and geochemical data, a modeling approach was performed to investigate the compositional features and temperatures of calcite depositing fluids. The results of our studies give evidence that (1) pore-fluids in Carrara marble, consisting of metamorphic formation waters, were re-mobilized during veining event and migrated within the veins in closed system conditions, (2) veins formed after ductile folding phases and before high-angle brittle faulting events, at temperature and pressure around 250 °C and 210 MPa, and finally (3) about 12 g H2O/m3 marble are calculated to have been available as vein parental fluid at the time of vein formation.  相似文献   

4.
The Vado di Corno Fault Zone (VCFZ) is an active extensional fault cutting through carbonates in the Italian Central Apennines. The fault zone was exhumed from ∼2 km depth and accommodated a normal throw of ∼2 km since Early-Pleistocene. In the studied area, the master fault of the VCFZ dips N210/54° and juxtaposes Quaternary colluvial deposits in the hangingwall with cataclastic dolostones in the footwall. Detailed mapping of the fault zone rocks within the ∼300 m thick footwall-block evidenced the presence of five main structural units (Low Strain Damage Zone, High Strain Damage Zone, Breccia Unit, Cataclastic Unit 1 and Cataclastic Unit 2). The Breccia Unit results from the Pleistocene extensional reactivation of a pre-existing Pliocene thrust. The Cataclastic Unit 1 forms a ∼40 m thick band lining the master fault and recording in-situ shattering due to the propagation of multiple seismic ruptures. Seismic faulting is suggested also by the occurrence of mirror-like slip surfaces, highly localized sheared calcite-bearing veins and fluidized cataclasites. The VCFZ architecture compares well with seismological studies of the L'Aquila 2009 seismic sequence (mainshock MW 6.1), which imaged the reactivation of shallow-seated low-angle normal faults (Breccia Unit) cut by major high-angle normal faults (Cataclastic Units).  相似文献   

5.
Conjugate cataclastic deformation bands cut unconsolidated sand and gravel at McKinleyville, California, and dip shallowly towards the north-northeast and south-southwest. The acute dihedral angle between the two sets of deformation bands is 47° and is bisected by the sub-horizontal, north-northeast directed incremental and finite shortening directions. Trishear models of fault propagation folding above the McKinleyville fault predict two sets of LNFE (lines of no finite elongation) that plunge steeply and shallowly to the south and north. These predictions are inconsistent with deformation band orientations and suggest that deformation bands did not form parallel to these LNFE. During plane strain, zero extension directions with acute dihedral angles of 47° develop when the dilatancy rate (dV/dε1) is −4.3. Experimental dilatancy rates for Vosges sandstone (cohesion > 0) and unconsolidated Hostun sand suggest the deformation bands either developed parallel to zero extension directions or in accordance with the Mohr–Coulomb criterion, assuming initial porosities of 22% and 39%, respectively. An empirical relationship between dV/dε1, relative density and mean stress suggests that dilatancy rates for Vosges sandstone overestimate dV/dε1 at McKinleyville. Deformation bands at McKinleyville likely developed either in a Mohr–Coulomb orientation, or an intermediate orientation bounded by the Mohr–Coulomb (θC) and Roscoe (θR) angles.  相似文献   

6.
李兴唐 《地质科学》1981,(3):212-222
地质体是在地壳演化中形成的,它是建造和构造形变的综合体。断裂化的地质体在较晚期构造力或工程载荷作用下沿已存在的断裂发生形变和位移的现象被称为迭加断裂,其形成过程即是迭加断裂作用。 本文以莫尔-库仑理论为基楚,探讨断裂发育与迭加断裂作用、构造应力场的关系,并对地质构造研究中的“断裂继承”,“断裂复活”进行定量的探讨。研究过程中承谷德振老师指导和鼓励,于此表示衷心的感谢。  相似文献   

7.
We resolve the anisotropy of magnetic susceptibility (AMS) axes along fault planes, cores and damage zones in rocks that crop out next to the Dead Sea Transform (DST) plate boundary. We measured 261 samples of mainly diamagnetic dolostones that were collected from 15 stations. To test the possible effect of the iron content on the AMS we analyzed the Fe concentrations of the samples in different rock phases. Dolostones with mean magnetic susceptibility value lower than −4 × 10−6 SI and iron content less than ∼1000 ppm are suitable for diamagnetic AMS-based strain analysis. The dolostones along fault planes display AMS fabrics that significantly deviate from the primary “sedimentary fabric”. The characteristics of these fabrics include well-grouped, sub-horizontal, minimum principal AMS axes (k3) and sub-vertical magnetic foliations commonly defined by maximum and intermediate principal AMS axes (k1 and k2 axes, respectively). These fabrics are distinctive along fault planes located tens of kilometers apart, with strikes ranging between NNW-SSE and NNE-SSW and different senses of motion. The obtained magnetic foliations (k1–k2) are sub-parallel (within ∼20°) to the fault planes. Based on rock magnetic and geochemical analyses, we interpret the AMS fabrics as the product of both shape and crystallographic anisotropy of the dolostones. Preferred shape alignment evolves due to mechanical rotation of subordinate particles and rock fragments at the fault core. Preferred crystallographic orientation results from elevated frictional heating (>300 °C) during faulting, which enhances c-axes alignment in the cement-supported dolomite breccia due to crystal-plastic processes. The penetrative deformation within fault zones resulted from the local, fault-related strain field and does not reflect the regional strain field. The analyzed AMS fabrics together with fault-plane kinematics provide valuable information on faulting characteristics in the uppermost crust.  相似文献   

8.
Recent studies, focused on dihedral angles and intersection processes, have increased understandings of conjugate fault mechanisms. We present new 3-D seismic data and microstructural core analysis in a case study of a large conjugate strike-slip fault system from the intracratonic Tarim Basin, NW China. Within our study area, "X" type NE and NW trending faults occur within CambrianOrdovician carbonates. The dihedral angles of these conjugate faults have narrow ranges, 19° to 62° in the Cambrian and 26° to 51° in the Ordovician, and their modes are 42° and 44° respectively. These data are significantly different from the ～60° predicted by the Coulomb fracture criterion. It is concluded that:(1) The dihedral angles of the conjugate faults were not controlled by confining pressure, which was low and associated with shallow burial;(2) As dihedral angles were not controlled by pressure they can be used to determine the shortening direction during faulting;(3) Sequential slip may have played an important role in forming conjugate fault intersections;(4) The conjugate fault system of the Tarim basin initiated as rhombic joints; these subsequently developed into sequentially active "X" type conjugate faults; followed by preferential development of the NW-trending faults; then reactivation of the NE trending faults. This intact rhombic conjugate fault system presents new insights into mechanisms of dihedral angle development, with particular relevance to intracratonic basins.  相似文献   

9.
Earthquake focal mechanism solutions from 18 events in the central and northern parts of the Gulf of Suez with local magnitudes ranging from 2.8 to 5.2 and occurring between 1983 and 2004 are used to determine the type of motion and stress pattern of the region. Fault plane solutions show mostly normal component; pure normal faulting mechanisms and normal faulting with a strike-slip component. Only some mechanisms show pure strike-slip faulting. The fault planes strike in NW, WNW, NNE and ENE directions, in conformity with the geologically observed striking faults in the northern and central parts of the gulf. The principal stress orientation is also estimated by inverting the selected focal mechanism solutions. The results show that the northern part of the Gulf is subjected to NE–SW to NNE–SSW extension, with a horizontal σ3 (plunge 3°) and subvertical σ1 (plunge 80°). This means that the horizontal extensional stresses are still present in the central/northern Gulf of Suez.  相似文献   

10.
The >200 km long Moonlight Fault Zone (MFZ) in southern New Zealand was an Oligocene basin-bounding normal fault zone that reactivated in the Miocene as a high-angle reverse fault (present dip angle 65°–75°). Regional exhumation in the last c. 5 Ma has resulted in deep exposures of the MFZ that present an opportunity to study the structure and deformation processes that were active in a basin-scale reverse fault at basement depths. Syn-rift sediments are preserved only as thin fault-bound slivers. The hanging wall and footwall of the MFZ are mainly greenschist facies quartzofeldspathic schists that have a steeply-dipping (55°–75°) foliation subparallel to the main fault trace. In more fissile lithologies (e.g. greyschists), hanging-wall deformation occurred by the development of foliation-parallel breccia layers up to a few centimetres thick. Greyschists in the footwall deformed mainly by folding and formation of tabular, foliation-parallel breccias up to 1 m wide. Where the hanging-wall contains more competent lithologies (e.g. greenschist facies metabasite) it is laced with networks of pseudotachylyte that formed parallel to the host rock foliation in a damage zone extending up to 500 m from the main fault trace. The fault core contains an up to 20 m thick sequence of breccias, cataclasites and foliated cataclasites preserving evidence for the progressive development of interconnected networks of (partly authigenic) chlorite and muscovite. Deformation in the fault core occurred by cataclasis of quartz and albite, frictional sliding of chlorite and muscovite grains, and dissolution-precipitation. Combined with published friction and permeability data, our observations suggest that: 1) host rock lithology and anisotropy were the primary controls on the structure of the MFZ at basement depths and 2) high-angle reverse slip was facilitated by the low frictional strength of fault core materials. Restriction of pseudotachylyte networks to the hanging-wall of the MFZ further suggests that the wide, phyllosilicate-rich fault core acted as an efficient hydrological barrier, resulting in a relatively hydrous footwall and fault core but a relatively dry hanging-wall.  相似文献   

11.
On December 9, 2007, a 4.9 mb earthquake occurred in the middle of the São Francisco Craton, in a region with no known previous activity larger than 4 mb. This event reached intensity VII MM (Modified Mercalli) causing the first fatal victim in Brazil. The activity had started in May 25, 2007 with a 3.5 magnitude event and continued for several months, motivating the deployment of a local 6-station network. A three week seismic quiescence was observed before the mainshock. Initial absolute hypocenters were calculated with best fitting velocity models and then relative locations were determined with hypoDD. The aftershock distribution indicates a 3 km long rupture for the mainshock. The fault plane solution, based on P-wave polarities and hypocentral trend, indicates a reverse faulting mechanism on a N30°Ε striking plane dipping about 40° to the SE. The rupture depth extends from about 0.3 to 1.2 km only. Despite the shallow depth of the mainshock, no surface feature could be correlated with the fault plane. Aeromagnetic data in the epicentral area show short-wavelength lineaments trending NNE–SSW to NE–SW which we interpret as faults and fractures in the craton basement beneath the surface limestone layer. We propose that the Caraíbas–Itacarambi seismicity is probably associated with reactivation of these basement fractures and faults under the present E–W compressional stress field in this region of the South American Plate.  相似文献   

12.
The Late Cretaceous location of the Lhasa Terrane is important for constraining the onset of India-Eurasia collision. However, the Late Cretaceous paleolatitude of the Lhasa Terrane is controversial. A primary magnetic component was isolated between 580 °C and 695 °C from Upper Cretaceous Jingzhushan Formation red-beds in the Dingqing area, in the northeastern edge of the Lhasa Terrane, Tibetan Plateau. The tilt-corrected site-mean direction is Ds/Is = 0.9°/24.3°, k = 46.8, α95 = 5.6°, corresponding to a pole of Plat./Plon. = 71.4°/273.1°, with A95 = 5.2°. The anisotropy-based inclination shallowing test of Hodych and Buchan (1994) demonstrates that inclination bias is not present in the Jingzhushan Formation. The Cretaceous and Paleogene poles of the Lhasa Terrane were filtered strictly based on the inclination shallowing test of red-beds and potential remagnetization of volcanic rocks. The summarized poles show that the Lhasa Terrane was situated at a paleolatitude of 13.2° ± 8.6°N in the Early Cretaceous, 10.8° ± 6.7°N in the Late Cretaceous and 15.2° ± 5.0°N in the Paleogene (reference point: 29.0°N, 87.5°E). The Late Cretaceous paleolatitude of the Lhasa Terrane (10.8° ± 6.7°N) represented the southern margin of Eurasia prior to the collision of India-Eurasia. Comparisons with the Late Cretaceous to Paleogene poles of the Tethyan Himalaya, and the 60 Ma reference pole of East Asia indicate that the initial collision of India-Eurasia occurred at the paleolatitude of 10.8° ± 6.7°N, since 60.5 ± 1.5 Ma (reference point: 29.0°N, 87.5°E), and subsequently ~ 1300 ± 910 km post-collision latitudinal crustal convergence occurred across the Tibet. The vast majority of post-collision crustal convergence was accommodated by the Cenozoic folding and thrust faulting across south Eurasia.  相似文献   

13.
Shear heating by reverse faulting on a sharp straight fault plane is modelled. Increase in temperature (T i ) of faulted hangingwall and footwall blocks by frictional/shear heating for planar rough reverse faults is proportional to the coefficient of friction (μ), density and thickness of the hangingwall block (ρ). T i increases as movement progresses with time. Thermal conductivity (K i ) and thermal diffusivity (\(k_{\mathrm {i}}^{\prime }\)) of faulted blocks govern T i but they do not bear simple relation. T i is significant only near the fault plane. If the lithology is dry and faulting brings adjacent hangingwall and footwall blocks of the same lithology in contact, those blocks undergo the same rate of increase in shear heating per unit area per unit time.  相似文献   

14.
We present new constraints on an active low-angle normal fault system in the Città di Castello–Sansepolcro basin (CSB) of the northern Apennines of Italy. New field data from the geological survey of the Carta Geologica d'Italia (CARG project) define the surface geometry of the normal fault system and lead to an interpretation of the CROP 03 deep-crust seismic reflection profile (Castiglion Fiorentino–Urbania segment), with particular attention paid to the geometry of the Plio-Quaternary extensional structures. Surface and sub-surface geological data are integrated with instrumental and historical seismicity in order to define the seismotectonics of the area.Low-angle east-dipping reflectors are the seismic expression of the well-known Altotiberina Fault (AF), a regional extensional detachment on which both east- and west-dipping high-angle faults, bounding the CSB, sole out. The AF breakaway zone is located ～ 10 km west of the CSB. Within the extensional allochthon, synthetic east-dipping planes prevail. Displacement along the AF is ～ 4.5 km, which agrees with the cumulative offset due to its synthetic splays. The evolution of the CSB has mainly been controlled by the east-dipping fault system, at least since Early Pleistocene time; this system is still active and responsible for the seismicity of the area. A low level of seismic activity was recorded instrumentally within the CSB, but several damaging earthquakes have occurred in historical times. The instrumental seismicity and the intensity data points of the largest historical earthquakes (5 events with maximum MCS intensity of IX to IX–X) allow us to propose two main seismogenic structures: the Monte Santa Maria Tiberina (Mmax = 5.9) and Città di Castello (Mmax up to 6.5) normal faults. Both are synthetic splays of the AF detachment, dipping to the NE at moderate (45–50°) to low (25–30°) angles and cutting the upper crust up to the surface. This study suggests that low-angle normal faults (at least with dips of 25–30°) may be seismogenic.  相似文献   

15.
3D field data on mesoscale normal faults were collected to examine the geometries and growth of faults in multilayer systems. Observation and analysis of the fractures include the collection of geometric attributes such as fault dips and fault zone thicknesses, detailed mapping in cross-sections and plan views, and the construction of individual and cumulative displacement profiles. Fault zone growth is consistent with a “coherent model” and is strongly influenced by the multilayer system. In the limestone layers, faults grew in several steps, including opening and frictional sliding on 80° dipping segments. Faulting in clay layers was in the form of 40° dipping faults and sub-horizontal faults, the latter being mostly early features developed under the same extensional regime as normal faults and disturbing the fault architecture. The fault zone thickness increases with the limestone thickness and the presence of sub-horizontal faults in clay beds. Numerous connections occur in clay units. The moderate (≈0.08) and low (<0.03) mean displacement gradients in clays and in limestones respectively indicate that the vertical propagation of faults is inhibited in clay layers. Analysis of displacement along fault strike indicates that a 0.08 displacement gradient is associated with the horizontal propagation of fault segments in limestones. According to this value, the fault zones are much longer than expected. It is associated with ‘flat topped’ displacement profiles along some fault segments and connection between segments to form complex fault zones.  相似文献   

16.
Four distinct components of natural remanent magnetization were isolated from a single site in welded tuffs in the Upper Cretaceous Kisin Group of the Sikhote Alin mountain range, Russia. In order to contribute toward a basis for an interpretation of multicomponent magnetization, rock magnetic experiments were performed on the welded tuffs. All four magnetization components essentially reside in magnetite. The lowest-temperature component up to 300 °C (component A: D=349.3°, I=60.9°, α95=7.3°, N=7) is a present day viscous magnetization. The third-removed component (component C: D=41.4°, I=51.8°, α95=3.5°, N=8), isolated over the temperature range of 450–560 °C, is a primary remanence. The second- and fourth-demagnetized components (component B: D=174.7°, I=−53.1°, α95=21.2°, N=3 and component D: D=188.1°, I=−64.5°, α95=4.0°, N=8, respectively) are secondary magnetizations related to a thermal event in Sikhote Alin between 66 and 51 Ma. Components B and D were acquired through different remagnetization processes. Component B is ascribed to a thermoviscous remanent magnetization carried by single-domain magnetite, and component D is a chemical remanent magnetization.  相似文献   

17.
A combined paleomagnetic and geochronological investigation has been performed on Cretaceous rocks in southern Qiangtang terrane (32.5°N, 84.3°E), near Gerze, central Tibetan Plateau. A total of 14 sites of volcanic rocks and 22 sites of red beds have been sampled. Our new U–Pb geochronologic study of zircons dates the volcanic rocks at 103.8 ± 0.46 Ma (Early Cretaceous) while the red beds belong to the Late Cretaceous. Rock magnetic experiments suggest that magnetite and hematite are the main magnetic carriers. After removing a low temperature component of viscous magnetic remanence, stable characteristic remanent magnetization (ChRM) was isolated successfully from all the sites by stepwise thermal demagnetization. The tilt-corrected mean direction from the 14 lava sites is D = 348.0°, I = 47.3°, k = 51.0, α95 = 5.6°, corresponding to a paleopole at 79.3°N, 339.8°E, A95 = 5.7° and yielding a paleolatitude of 29.3° ± 5.7°N for the study area. The ChRM directions isolated from the volcanic rocks pass a fold test at 95% confidence, suggesting a primary origin. The volcanic data appear to have effectively averaged out secular variation as indicated by both geological evidence and results from analyzing the virtual geomagnetic pole (VGP) scatter. The mean inclination from the Late Cretaceous red beds, however, is 13.1° shallower than that of the ~ 100 Ma volcanic rocks. After performing an elongation/inclination analysis on 174 samples of the red beds, a mean inclination of 47.9° with 95% confidence limits between 41.9° and 54.3° is obtained, which is consistent with the mean inclination of the volcanic rocks. The site-mean direction of the Late Cretaceous red beds after tilt-correction and inclination shallowing correction is D = 312.6°, I = 47.7°, k = 109.7, α95 = 3.0°, N = 22 sites, corresponding to a paleopole at 49.2°N, 1.9°E, A95 = 3.2° (yielding a paleolatitude of 28.7° ± 3.2°N for the study area). The ChRM of the red beds also passes a fold test at 99% confidence, indicating a primary origin. Comparing the paleolatitude of the Qiangtang terrane with the stable Asia, there is no significant difference between our sampling location in the southern Qiangtang terrane and the stable Asia during ~ 100 Ma and Late Cretaceous. Our results together with the high quality data previously published suggest that an ~ 550 km N–S convergence between the Qiangtang and Lhasa terranes happened after ~ 100 Ma. Comparison of the mean directions with expected directions from the stable Asia indicates that the Gerze area had experienced a significant counterclockwise rotation after ~ 100 Ma, which is most likely caused by the India–Asia collision.  相似文献   

18.
The unconformity-type uranium deposits of the Athabasca Basin (Saskatchewan, Canada) are hosted near the unconformity between a middle Proterozoic intracratonic sedimentary basin and an Archean to Paleo-Proterozoic metamorphic and plutonic basement. These deposits, which are considered to be the richest U deposits in the world, are the result of massive basinal fluid migrations in the basement rocks.This study shows that basinal brines have strongly penetrated into the basement not only through faults and major pathways but also by way of dense networks of microfractures which favoured the percolation of fluids down to considerable depths (hundred metres below the unconformity) and their chemical modification (salinity increase) by interaction with basement lithologies. These processes are one of the major causes of uranium mobility within the basement rocks and the formation of unconformity-type mineralization.Microfracture networks, which opened during the basinal brine stage (ca. 1600–1400 Ma) are interpreted as sets of mode I cracks corresponding to a specific stage of deformation and occur as fluid inclusion planes after healing. The stress field at that stage (σ1 = N130–150 °E, subvertical) partly reopened the earlier microcrack networks (σ1 = N80–110 °E and N130–150 °E, subvertical) issued from the Trans-Hudson Orogeny late retrograde metamorphic stage (ca. 1795–1720 Ma). The circulation of the two types of fluids (carbonic and brines) occurs thus at two distinct events (Trans-Hudson Orogeny late retrograde metamorphism for carbonic fluids and maximal burial diagenesis for brines) but the same main microfissure geometry was used by the fluids. This demonstrates the existence of a similar stress field direction acting before and after the basin formation. Moreover, the brine circulations in the basement acted in a wider volume than the clay-rich alteration halo surrounding the U-ores, generally considered as the main envelope of fluid percolation outside the fault systems. The data on the chemistry of the fluids and on the geometry of their migration at various scales emphasise the fundamental role of the basement in the chemical evolution of highly saline brines linked to unconformity-related uranium mineralization in the Athabasca Basin.  相似文献   

19.
Three isobaric (P H 2O=1 kb) and isothermal (T N=355, 502 and 630° C) nucleation experiments of OH-muscovite have been carefully studied by powder X-ray diffraction and high resolution transmission electron microscopy. The intimate stacking sequences of layers within individual spiral-free crystallites are determined by lattice (or structure)-imaging techniques. At T N=355° C, disordered stacking involving local 1M and 2M 1 order, largely dominates. A few nuclei with 1M structure coexist with disordered ones. At T N=502° C, most of micas are of more or less heavily faulted 1M structure but coexist with heavily faulted 2M 1 nuclei. At T N=630° C, almost all the population is of 2M 1 structure with rare stacking faults often located in the middle of the sequence. The nature of intrinsic and extrinsic stacking faults within 1M and 2M 1 matrices is described. Decreasing temperature and/or increasing supersaturation are found to promote disorder in muscovite. The role of the style of packing of the two early first condensed layers (and related specific distortions of the single layer structure) on the selection of the basic structure developed through further 2D-nucleation, as suggested by Takeda and Ross (1975), is shown to be counterbalanced by environmental parameters like T and supersaturation. These high resolution transmission electron microscopy (HRTEM) observations on screw dislocation-free crystallites give experimental support to the basic assumptions of a recent faulted matrix model which has been proposed to explain the origin of complex polytypes of mica according to a subsequent spiral growth mechanism.  相似文献   

20.
Jurassic to Cretaceous red sandstones were sampled at 33 sites from the Khlong Min and Lam Thap formations of the Trang Syncline (7.6°N, 99.6°E), the Peninsular Thailand. Rock magnetic experiments generally revealed hematite as a carrier of natural remanent magnetization. Stepwise thermal demagnetization isolates remanent components with unblocking temperatures of 620–690 °C. An easterly deflected declination (D = 31.1°, I = 12.2°, α95 = 13.9°, N = 9, in stratigraphic coordinates) is observed as pre-folding remanent magnetization from North Trang Syncline, whereas westerly deflected declination (D = 342.8°, I = 22.3°, α95 = 12.7°, N = 13 in geographic coordinates) appears in the post-folding remanent magnetization from West Trang Syncline. These observations suggest an occurrence of two opposite tectonic rotations in the Trang area, which as a part of Thai–Malay Peninsula received clockwise rotation after Jurassic together with Shan-Thai and Indochina blocks. Between the Late Cretaceous and Middle Miocene, this area as a part of southern Sundaland Block experienced up to 24.5° ± 11.5° counter-clockwise rotation with respect to South China Block. This post-Cretaceous tectonic rotation in Trang area is considered as a part of large scale counter-clockwise rotation experienced by the southern Sundaland Block (including the Peninsular Malaysia, Borneo and south Sulawesi areas) as a result of Australian Plate collision with southeast Asia. Within the framework of Sundaland Block, the northern boundary of counter-clockwise rotated zone lies between the Trang area and the Khorat Basin.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号