共查询到20条相似文献，搜索用时 46 毫秒
1.
To improve the data quality of converted waves, and better identify and suppress the strong ground-roll interference in three-component (3C) seismic recordings on land, we present an adaptive polarization filtering method, which can effectively separate the groundroll interference by combining complex polarization and instantaneous polarization analysis. The ground roll noise is characterized by elliptical plane polarization, strong energy, low apparent velocity, and low frequency. After low-pass filtering of the 3C data input within a given time-window of the ground roll, the complex covariance matrix is decomposed using the sliding time window with overlapping data and length that depends on the dominant ground-roll frequency. The ground-roll model is established using the main eigenvectors, and the ground roll is detected and identified using the instantaneous polarization area attributes and average energy constraints of the ground-roll zone. Finally, the ground roll is subtracted. The threshold of the method is stable and easy to select, and offers good groundroll detection. The method is a robust polarization filtering method. Model calculations and actual data indicate that the method can effectively identify and attenuate ground roll while preserving the effective signals. 相似文献
2.
Ground roll attenuation using the S and x-f-k transforms 总被引：2，自引：0，他引：2
Ground roll, which is characterized by low frequency and high amplitude, is an old seismic data processing problem in land‐based seismic acquisition. Common techniques for ground roll attenuation are frequency filtering, f‐k or velocity filtering and a type of f‐k filtering based on the time‐offset windowed Fourier transform. These techniques assume that the seismic signal is stationary. In this study we utilized the S, x‐f‐k and t‐f‐k transforms as alternative methods to the Fourier transform. The S transform is a type of time‐frequency transform that provides frequency‐dependent resolution while maintaining a direct relationship with the Fourier spectrum. Application of a filter based on the S transform to land seismic shot records attenuates ground roll in a time‐frequency domain. The t‐f‐k and x‐f‐k transforms are approaches to localize the apparent velocity panel of a seismic record in time and offset domains, respectively. These transforms provide a convenient way to define offset or time‐varying reject zones on the separate f‐k panel at different offsets or times. 相似文献
3.
In the field of seismic exploration, ground roll seriously affects the deep effective reflections from subsurface deep structures. Traditional curvelet transform cannot provide an adaptive basis function to achieve a suboptimal denoised result. In this paper, we propose a method based on empirical curvelet transform (ECT) for ground roll attenuation. Unlike the traditional curvelet transform, this method not only decomposes seismic data into multiscale and multi-directional components, but also provides an adaptive filter bank according to frequency content of seismic data itself. So, ground roll can be separated by using this method. However, as the frequency of reflection and ground roll components are close, we apply singular value decomposition (SVD) in the curvelet domain to differentiate the ground roll and reflection better. Examples of synthetic and field seismic data reveal that the proposed method based ECT performs better than the traditional curvelet method in terms of the suppression of ground roll. 相似文献
4.
Ground roll is an interference wave that severely degrades the signal-to-noise ratio of seismic data and affects its subsequent processing and interpretation. In this study, according to differences in morphological characteristics between ground roll and reflected waves, we use morphological component analysis based on two-dimensional dictionaries to separate ground roll and reflected waves. Because ground roll is characterized by low-frequency, low-velocity, and dispersion, we select two-dimensional undecimated discrete wavelet transform as a sparse representation dictionary of ground roll. Because of a strong local correlation of the reflected wave, we select two-dimensional local discrete cosine transform as the sparse representation dictionary of reflected waves. A sparse representation model of seismic data is constructed based on a two-dimensional joint dictionary then a block coordinate relaxation algorithm is used to solve the model and decompose seismic record into reflected wave part and ground roll part.The good effects for the synthetic seismic data and application of real seismic data indicate that when using the model, strong-energy ground roll is considerably suppressed and the waveform of the reflected wave is effectively protected. 相似文献
5.
Ground roll waves interfere with seismic data. The suppression of ground roll waves based on the division of wavelet frequencies considers the low-frequency characteristics of ground roll waves. However, this method will not be effective when the ground roll wave and the effective signal have the same frequency bands because of overlapping. The radial trace transform (RTT) considers the apparent velocity difference between the effective signal and the ground roll wave to suppress the latter, but affects the low-frequency components of the former. This study proposes a ground roll wave suppression method by combining the wavelet frequency division and the RTT based on the difference between the ground roll wave velocity and the effective signal and their energy difference in the wavelet domain, thus making full use of the advantages of both methods. First, we decompose the seismic data into different frequency bands through wavelet transform. Second, the RTT and low-cut filtering are applied to the low-frequency band, where the ground roll waves are appearing. Third, we reconstruct the seismic record without ground roll waves by using the inverse RTT and the remaining frequency bands. The proposed method not only improves the ground roll wave suppression, but also protects the signal integrity. The numerical simulation and real seismic data processing results suggest that the proposed method has a strong ability to denoise while preserving the amplitude. 相似文献
6.
面波压制是地震数据处理中的一个重要问题. 常规的处理方法虽然能在一定程度上压制面波,但是在处理过程中只是单一的利用面波的一种特性,例如频率域滤波中利用面波与有效信号频率之间的差别,因此难以有效地压制面波. 利用Ridgelet变换可将原始地震记录拓展到（a,τ,p）三维空间,从而可以同时利用地震记录的视速度、时间和尺度域特性差别,实现有效信号与面波的分离. 文中通过理论合成记录及实际地震记录的算例,证实了基于Ridgelet变换的面波压制方法是有效且可行的. 相似文献
7.
Mohsen Kazemnia Kakhki Webe J. Mansur Franciane C. Peters 《Geophysical Prospecting》2020,68(7):2104-2118
Obtaining geological information from seismic data motivates researchers to innovate and improve seismic wave processing tools. Polarization-based methods have received much attention regarding their ability to discriminate between different phases of the seismic wave based on polarity. Combining the intuitive definition of polarity in the frequency domain (monochromatic waves) with the non-stationary properties provided by time-domain methods, time-frequency approaches are attracting widespread interest because they localize the information extracted from the seismic waves in the joint time and frequency domains. Due to the lack of high-resolution time-frequency maps, the time-frequency polarization approach was not able to resolve specific temporal polarity changes in the seismic signal. The main objective of this study was to devise a robust time-frequency-based polarization filtering method using high-resolution polarization attributes obtained directly from the sparse time-frequency map without using Eigen analysis or analytic signals. The method proposed here utilizes a computationally effective sparsity-based adaptive S-transform to obtain a high-resolution polarization map of an inherently non-stationary seismogram for the entire frequency content of the signal at different times. The superiority of the proposed method over the S-transform method was verified using synthetic and real data sets to calculate the polarization attributes in the time-frequency domain and separate the Rayleigh waves from the seismogram. 相似文献
8.
We introduce a method of wavefield separation from multicomponent data sets based on the use of the continuous wavelet transform. Our method is a further generalization of the approach proposed by Morozov and Smithson, in that by using the continuous wavelet transform, we can achieve a better separation of wave types by designing the filter in the time–frequency domain. Furthermore, using the instantaneous polarization attributes defined in the wavelet domain, we show how to construct filters tailored to separate different wave types (elliptically or linearly polarized), followed by an inverse wavelet transform to obtain the desired wave type in the time domain. Using synthetic and experimental data, we show how the present method can be used for wavefield separation. 相似文献
9.
提出一种自适应协方差的时频域极化滤波方法。该方法在广义S变换时频方法的基础上,构造时频域自适应协方差矩阵,通过特征分析计算时频域瞬时极化参数,设计极化滤波器,实现多分量地震极化分析和滤波。其优势在于协方差矩阵的分析时窗的长度由多分量地震数据的瞬时频率确定,可以自适应于有效信号的周期,在每个时频点计算极化参数不需要进行插值处理;结合时间频率信息,解决在时间域或频率域波形或频率重叠的信号具有明显的直观性。模型数据及实际三分量台站地震数据处理结果表明,该极化滤波方法在台站地震资料分析和处理方面具有很好的直观性和较高的分辨率。 相似文献
10.
In this paper we study the S wave basement velocity structure and S wave splitting and polarization anomalies using the three
component records of deep seismic sounding in the Three Groges Dam area, and further discuss the methods to study the anisotropy
of crustal medium, the direction of regional tectonic stress field, and the physical indicator of potential earthquake sources
using shear wave splitting and polarization anomalies. It has been demonstrated by analyzing the DSS data in the Three Gorges
Dam area that S wave splitting and polarization anomalies are reliable means for studying seismic anisotropy of crustal medium
and the direction of regional tectonic stress field. At the same time, it has been shown that DSS data are very useful for
widening S wave observing window and distinguishing anomalous body, because DSS data have the advantage that the source position
is known prior and S wave ray path can be traced exactly.
The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,15, 1–3, 1993. 相似文献
11.
Many natural phenomena, including geologic events and geophysical data, are fundamentally nonstationary ‐ exhibiting statistical variation that changes in space and time. Time‐frequency characterization is useful for analysing such data, seismic traces in particular. We present a novel time‐frequency decomposition, which aims at depicting the nonstationary character of seismic data. The proposed decomposition uses a Fourier basis to match the target signal using regularized least‐squares inversion. The decomposition is invertible, which makes it suitable for analysing nonstationary data. The proposed method can provide more flexible time‐frequency representation than the classical S transform. Results of applying the method to both synthetic and field data examples demonstrate that the local time‐frequency decomposition can characterize nonstationary variation of seismic data and be used in practical applications, such as seismic ground‐roll noise attenuation and multicomponent data registration. 相似文献
12.
实际地震信号通常可表示为具有波形特征差异的多种基本波形信号的线性组合,如叠前道集中的工频干扰噪声与有效波信号、面波噪声与体波信号等.选择单一数学变换方法,往往不易实现地震信号的稀疏表示.近年来发展的形态成分分析理论,通过联合多种数学变换,可实现对复杂信号的稀疏表示.本文根据单道地震记录中面波与体波信号波形结构特征的差异性,提出一种基于形态成分分析的面波噪声衰减方法.针对面波的低频、窄带以及频散特性选择一维平稳小波变换作为其稀疏表示字典,而针对体波波形的局部相关特性选择局部离散余弦变换作为其稀疏表示字典,建立基于双波形字典的形态成分分析模型,通过求解该稀疏优化问题获得最终的信噪分离结果.理论模型和实际地震资料处理证实该方法不仅能够衰减单炮地震记录中的强面波干扰噪声,同时能够更好地保护有效信号的波形特征与频谱带宽,为地震资料的后续处理和分析提供良好的数据基础. 相似文献
13.
In the paper, we propose a surface wave suppression method in time-frequency domain based on the wavelet transform, considering the characteristic difference of polarization attributes, amplitude energy and apparent velocity between the effective signals and strong surface waves. First, we use the proposed method to obtain time–frequency spectra of seismic signals by using the wavelet transform and calculate the instantaneous polarizability at each point based on instantaneous polarization analysis. Then, we separate the surface wave area from the signal area based on the surface-wave apparent velocity and the average energy of the signal. Finally, we combine the polarizability, energy, and frequency characteristic to identify and suppress the signal noise. Model and field data are used to test the proposed filtering method. 相似文献
14.
深地震反射原始单炮数据是非平稳的弱能量反射信号,信噪比较低.如何提高信噪比一直是深地震反射数据前处理中的一大难题.S变换是一种适用于分析非平稳信号的时频变换方法.同其他分析时变信号的方法相比,S变换的基本小波不必满足小波在时间域均值为零的容许性条件,它的时频分辨率与分析信号的频率有关,且其在时间域的积分可以得到傅里叶频谱,其反变换也简单.因此,S变换容易表示深地震反射信号复杂的时频特性.本文在S变换的基础上,利用软阈值滤波方法对深地震反射数据进行处理,实验结果表明,该方法有效地提高了信噪比,压制了有效频带范围内的混频干扰,突出了弱反射信号,使得波组信息更加丰富,有利于连续追踪有效反射波组和识别薄地层,特别是提高了深部Moho界面反射层位的分辨率,为深地震反射剖面后续处理和准确解释奠定了基础. 相似文献
15.
In land seismic surveys spectrum equalization can increase the quality of seismic data in a selected frequency band. The power of lower frequencies in the spectrum of input traces is generally greater than that of higher frequencies, particularly in land seismic surveys because of ground roll. In order to improve the quality of seismic data it is necessary to raise the energy of higher frequencies to the same level as that of lower frequencies, without alteration of the phases. The first step of the method is to compute the amplitude spectrum of each input trace to determine a weighting function which is then applied to the amplitude spectrum in order to balance it. The function is the inverse of the short wavelength variation of the amplitude spectrum. The short wavelength variation can be obtained by interpolation between average values of the modulus of the amplitude spectrum computed in narrow bands within a selected band of frequencies. Another way of obtaining the short wavelength variation is to apply a low-pass filter to the amplitude spectrum. The calculations are readily performed in the frequency domain by the Fourier transform. Spectrum equalization is automatically adjusted to each trace and does not modify the average amplitude in the time domain. However, as the frequency band and energy of the ground roll both vary according to the distance from the shot, spectrum equalization tends to make the spectrum of output traces independent of the offset distance. The use of spectrum equalization before any two-dimensional filtering improves ground roll elimination. Continuity and resolution of horizons are also increased by spectrum equalization before CDP stack. Several examples of applications of spectrum equalization to seismic land and marine surveys are shown. 相似文献
16.
S变换是一种用于分析非平稳信号的时频变换方法, 可以很好地刻画地震信号的时频特性. 本文将S变换用于地震面波数据的噪声去除中, 首先介绍了S变换的理论基础, 然后设计了时频滤波和阈值滤波两种方法, 分别对天然地震面波数据和背景噪声数据进行去噪处理, 并与相位匹配滤波进行了比较． 结果表明, 面波数据经S变换去噪后, 群速度频散曲线的短周期部分得到改善, 能够连续追踪至6 s左右, 但长周期部分出现了缺失; S变换去噪的效果优于相位匹配滤波, 两者相结合会得到更加理想的结果． 相似文献
17.
18.
19.
20.
利用S波分裂方法的基本理论及计算方法,重点研究了皖北地区具有代表性的利辛张村附近周边地区25 km内,自1999年蒙城地震台数字化测震仪器正式记录以来至2010年9月,ML2.0及以上地方震的单台地震波形,利用有关S波分裂方法进行处理,得到该地区不同时段的S波的偏振方向及延迟时间,为皖北地区地震活动性研究及应力活动状态... 相似文献