共查询到20条相似文献，搜索用时 218 毫秒
1.
O.A. Montasir 《Ocean Engineering》2011,38(13):1417-1429
Spar platform has been regarded as a competitive floating structure for deep and ultra deep water oil and gas production. In this paper, an efficient methodology has been developed to determine the slow motion responses of slender floating offshore structures due to wave forces. Based on this methodology, a MATLAB program named ‘TRSPAR’ was developed to predict the dynamic responses in time domain and it was used in this study to obtain the numerical results of a typical truss spar platform connected to sea bed using nine taut mooring lines. The difference frequency forces were calculated using the principles of the extension of Morison equation for an inclined cylinder and the wave kinematics were predicted using hyperbolic extrapolation. Mooring lines were modelled as nonlinear springs and their stiffness was obtained by conducting the static offset simulation. Because of the lack of detailed calculations in literature, most of the equations used were derived and presented in this paper. The effects of the different sources of the second order difference frequency forces were compared for inertia and drag forces in terms of response spectra. To validate the TRSPAR code, its results were compared to results of a typical truss spar model test. 相似文献
2.
The motion response prediction of offshore structures may be carried out using time domain or frequency domain models or model tests. The frequency domain analysis uses the simplified, linearised form of the motion equations and it is very economical. The time domain analysis, unlike frequency domain models, is adequate to deal with non-linearities such as viscous damping and mooring forces, but it requires sophisticated solution techniques and it is expensive to employ. For moored semisubmersibles time domain techniques must be employed since there are strong nonlinearities in the system due to mooring line stiffness and damping and viscous drag forces. In the first part of this paper a time domain model to predict the dynamic response of a semi-submersibles are developed and the effect of thrusters and mooring line damping are incorporated into the time domain model. In the second part time domain simulations are carried out to find the total extreme motions and mooring forces. 相似文献
3.
This paper quantitatively studies the transient dynamic response of a semi-submersible production platform with the loss of one or several positioning mooring lines.A semi-submersible platform,production risers,and positioning mooring lines are all included in the numerical simulation.Increased motion of the semi-submersible platform,tension variation of the remaining mooring lines/risers and the risk of mooring line or riser clashing are all investigated through fully coupled time-domain analysis.Combined environmental loads are selected from irregular waves and the steady current varying from very rough to extreme sea conditions.Three dimension radiation/diffraction theories and Morison’s equation are applied to calculate first-order wave force and second-order mean drift force of floating semi-submersible platform.Nonlinear time-domain finite element methods are employed to analyze the behavior of mooring lines and risers.Results show that the failure of mooring lines seriously reduce the platform’s stability performance.The tension of the rest lines is also increased accordingly.Remaining lines which are closer to the failed lines will have larger tension increase to compensate.Line-Line distance provides practical information for the risk of clashing investigation. 相似文献
4.
Hull/mooring/riser coupled dynamic analysis and sensitivity study of a tanker-based FPSO 总被引：2，自引：0，他引：2
A computer program is developed for hull/mooring/riser coupled dynamic analysis of a tanker-based turret-moored FPSO (Floating Production Storage and Offloading) in waves, winds, and currents. In this computer program, the floating body is modeled as a rigid body with six degrees of freedom. The first- and second-order wave forces, added mass, and radiation damping at various yaw angles are calculated from the second-order diffraction/radiation panel program WAMIT. The wind and current forces for various yaw angles of FPSO are modeled following the empirical method suggested by OCIMF (Oil Company International Marine Forum).
The mooring/riser dynamics are modeled using a rod theory and finite element method (FEM), with the governing equations described in a generalized coordinate system. The dynamics of hull, mooring lines, and risers are solved simultaneously at each time step in a combined matrix for the specified connection condition. For illustration, semi-taut chain-steel wire-chain mooring lines and steel catenary risers are employed and their effects on global FPSO hull motions are investigated. To better understand the physics related to the motion characteristics of a turret-moored FPSO, the role of various hydrodynamic contributions is analyzed and assessed including the effects of hull and mooring/riser viscous damping, second-order difference-frequency wave-force quadratic transfer functions, and yaw-angle dependent wave forces and hydrodynamic coefficients. To see the effects of hull and mooring/riser coupling and mooring/riser damping more clearly, the case with no drag forces on those slender members is also investigated. The numerical results are compared with MARIN's wave basin experiments. 相似文献
5.
基于三维频域势流理论,计算船体的水动力参数;采用动态耦合方法分析了深海半潜式生产平台各系统之间的相互作用特征,研究了立管系统对锚泊系统定位能力的影响。计算结果表明,立管系统在一定程度上增加了整个系统的刚度,其所受的附加质量和阻尼可降低平台的低频响应,从而降低平台的偏移和系泊缆的张力;海流将增大立管上的拖曳力,使平台偏移更远,锚索上的张力更大;立管系统对锚泊系统定位性能的最终影响需综合考虑多种因素的叠加。对目标平台而言,由于服役海域的流速较大,对立管的拖曳作用较为明显。因此,为确保平台的安全性,当服役海域流速较大时,带有多立管的平台,其锚泊系统的设计应考虑立管的影响。 相似文献
6.
The dynamic analysis of a deepwater floating structure is complex due to dynamic coupling between the platform and the moorings/risers. Furthermore, the system response at the incident wave frequency and at the resonant low frequency is coupled due to geometric and hydrodynamic nonlinearities. As such, it is generally held that a fully coupled time-domain analysis should be used for an accurate prediction of the dynamic response. However, in a recent work, it is found that for an ultra-deepwater floating system, a fully coupled frequency-domain analysis can provide highly accurate response predictions. One reason is the accuracy of the drag linearization procedure over the motions at two time scales, another is the minimal geometric nonlinearity of the moorings/risers in deepwater. In this paper, the frequency-domain approach is investigated for intermediate water depths, and it is found that the accuracy reduces substantially as geometric nonlinearity becomes important. Therefore, a novel hybrid approach is developed, in which the low-frequency motion is simulated in the time domain while the wave frequency motion is solved in the frequency domain at regular intervals. Coupling between the two analyses is effected by the fact that (i) the low-frequency motion affects the line geometry for the wave frequency motion, and (ii) the wave frequency motion affects the modeling of the drag forces, which damp the low-frequency motion. The method is found to be nearly as accurate as fully coupled time domain analysis even for a system with a preponderance of nonlinear and coupling effects, but requiring only one-tenth of the computational effort. 相似文献
7.
The coupled hull, mooring and riser analysis techniques in time domain are widely recognized as the unique approach to predict the accurate global motions. However, these complex issues have not been perfectly solved due to a large number of nonlinear factors, e.g. forces nonlinearity, mooring nonlinearity, motion nonlinearity and so on. This paper investigates the coupled effects through the numerical uncoupled model, mooring coupled model and fully coupled model accounting mooring and risers based on a novel deep draft multi-spar which is especially designed for deepwater in 2009. The numerical static-offset, free-decay, wind-action tests are executed, and finally the three hours simulations are conducted under 100-year return period of GOM conditions involving wave, wind and current actions. The damping contributions, response characteristics and mooring line tensions are emphatically studied. 相似文献
8.
New Method for Predicting the Motion Responses of A Flexible Joint Multi-Body Floating System to Irregular Waves 总被引：4，自引：0，他引：4
A new hybrid method of frequency domain and time domain is developed in this paper to predict the motion responses of a flexibly joint multi-body floating system to irregular waves. The main idea of the method is that the three-dimensional frequency method is used to obtain the hydrodynamic coefficients and the response equations are solved in time domain step by step. All the forces can be obtained at the same time. The motions and nonlinear mooring forces of a box type six-body floating system are predicted. A comparison of the theoretical method-based solutions with experimental results has shown good agreement. 相似文献
9.
The coupled hull, mooring and riser analysis techniques in time domain are widely recognized as the unique approach to predict the accurate global motions. However, these complex issues have not been perfectly solved due to a large number of nonlinear factors, e.g. forces nonlinearity, mooring nonlinearity, motion nonlinearity and so on. This paper investigates the coupled effects through the numerical uncoupled model, mooring coupled model and fully coupled model accounting mooring and risers based on a novel deep draft multi-spar which is especially designed for deepwater in 2009. The numerical static-offset, free-decay, wind-action tests are executed, and finally three hours simulations are conducted under 100-year return period of GOM conditions involving wave, wind and current actions. The damping contributions, response characteristics and mooring line tensions are emphatically studied. 相似文献
10.
A method to compute wave- and current-induced viscous drift forces and moments on floating platforms in regular and random waves is presented. The relative velocity drag term of Morison's equation is used in conjunction with frequency domain first-order motion transfer functions to compute the drift forces and moments. Mean viscous drift forces and moments in regular waves in all six degrees-of-freedom of a tension leg platform are computed. The relative importance of the free-surface force integration, steady current, wave-current interaction and platform motions on the computed drift forces and moments are discussed. The results from this method, in the frequency domain, are used to compute the drift forces and responses in irregular waves using existing methods developed for potential drift computations. Comparisons with results from time-domain computations are also presented and good agreement between the frequency-domain and time-domain results is found. Some comparisons with experimental data are also made. The frequency-domain method is found to be an efficient and useful tool for the analysis of semi-submersible and tension leg platforms during the preliminary design stage in which extensive parametric studies need to be undertaken. 相似文献
11.
Excited by ocean currents, random wave and vessel motion, deepwater drilling risers exhibit significant dynamic response. In time domain, a method is proposed to calculate the nonlinear dynamic response of deepwater drilling risers subjected to random wave and dynamic large displacement vessel motion boundary condition. Structural and functional loads, external and internal pressure, free surface effect of irregular wave, hydrodynamic forces induced by current and wave, as well as wave and low frequency (drift) motion of the drilling vessel are all accounted for. An example is presented which illustrates the application of the proposed method. The study shows that long term drift motion of the vessel has profound effect on the envelopes of bending stress and lateral displacement, as well as the range of lower flex joint angle of the deepwater riser. It can also be concluded that vessel motion is the principal dynamic loading of nonlinear dynamic response for the deepwater risers rather than wave force. 相似文献
12.
In the paper, a comprehensive numerical study on the moored system is performed in time domain. The moored system, which is composed of the floating body sub-system and the mooring line sub-system, is calculated as a whole system by coupling. A time-domain method is applied to the analysis of the mooring line sub-system, and at the same time, an indirect time-domain method translated from frequency-domain to time-domain is developed to calculate the floating body sub-system. In the end, an FPSO vessel is calculated as a numerical example by the present method. A comparison of the result of the model test and that of the numerical method indicates that the present method is exact and effective. 相似文献
13.
《Applied Ocean Research》2005,27(4-5):187-208
In the present paper, the performance of a moored floating breakwater under the action of normal incident waves is investigated in the frequency domain. A three-dimensional hydrodynamic model of the floating body is coupled with a static and dynamic model of the mooring lines, using an iterative procedure. The stiffness coefficients of the mooring lines in six degrees of freedom of the floating breakwater are derived based on the differential changes of mooring lines' tensions caused by the static motions of the floating body. The model of the moored floating system is compared with experimental and numerical results of other investigators. An extensive parametric study is performed to investigate the effect of different configurations (length of mooring lines and draft) on the performance of the moored floating breakwater. The draft of the floating breakwater is changed through the appropriate modification of mooring lines' length. Numerical results demonstrate the effects of the wave characteristics and mooring lines' conditions (slack-taut). The existence of ‘optimum’ configuration of the moored floating breakwater in terms of wave elevation coefficients and mooring lines' forces is clearly demonstrated, through a decision framework. 相似文献
14.
15.
为研究顺应式海洋平台慢漂运动的影响因素,以截断圆柱和漂浮方箱为例进行了不规则波作用下的慢漂运动模型试验。测量了不同系泊刚度条件下的漂浮方箱以及相同系泊刚度条件下的截断圆柱和漂浮方箱在静水中自由衰减运动和在不规则波中的运动响应,并将运动响应分解成一阶波频运动响应和二阶低频运动响应,分析了系泊刚度和浮体形状对浮体运动的影响。通过物理模型试验发现了系泊刚度及浮体形状对顺应式系泊浮体一阶运动标准差和二阶低频运动平均漂移值和标准差的关系。结果表明由于顺应式浮体的固有周期远离波浪谱峰周期时,系泊刚度以及浮体形状对慢漂运动的一阶运动响应影响不大;二阶低频运动相对偏离平衡位置的平均值和标准差均随系泊刚度增大而减小,浮体形状同样对慢漂运动的二阶低频纵荡运动响应影响较大。试验结果为实际海洋工程的外形选择和系泊刚度选择提供数据支持。 相似文献
16.
Fully coupled global analysis of Floating Production Systems, including the vessel, the mooring system and the riser system is described. Design of the system can be a daunting task, involving more than 1000 load cases for global analysis. The primary driver for the mooring system and for the riser system is motion of the vessel. Vessel motions are driven by environmental forces, but are restrained by forces from the mooring and riser systems. Numerical models and procedures that provide accurate and efficient global modeling of the Floating Production System are presented. Both Time Domain and Frequency Domain procedures are included. The accuracy and efficiency of the procedures are illustrated in an example: a large semi with 16 mooring lines and 20 risers. The procedures provide the accuracy and efficiency for use of fully coupled analysis in design of Floating Production Systems from concept selection to final design, installation and operation. 相似文献
17.
The deployment of suitable configurations of mutually interacting floating bodies for efficiently controlling their hydrodynamic interactions towards the reduction of the wave drift forces and, thus, of the mooring lines’ loads, has, nowadays, gained a great scientific interest. In this paper, the hydrodynamic behaviour of a floating cylinder and a concentric annular flexible plate is analysed in the frequency domain aiming at the minimization of the drift forces acting on the cylinder by optimizing the flexural rigidity of the plate. The diffraction/radiation problem is solved using a higher-order boundary element method. The analysis is implemented assuming that both floating bodies oscillate freely in heave, while for the plate, flexible modes are, additionally, considered for describing its structural deformations. The required modes shapes are determined in vacuum (“dry” mode superposition approach) through analytical expressions. The flexural rigidity of the plate, D, is optimized at a specific wave number using a real-coded genetic algorithm. Initially, results are compared with numerical results of other investigators for the case of two rigid concentric floating cylinders. Next, extended results are presented, focusing on the effect of D, including its optimum value, on various physical quantities describing the behaviour of both the cylinder and the plate. Contrary to the isolated cylinder, the presence of the plate introduces sharp peaks in the variation pattern of the drift force of the cylinder, bounded at specific wave numbers, where resonance of the seiche mode of water motion in the annular cavity or of specific flexible modes of the plate occurs. However, by reducing D to its optimum value, the cylinder’s drift force obtains practically zero values at the target wave number, due to an efficient improvement of the wave field in the annular cavity around the cylinder. Moreover, a great reduction of the drift force compared to the isolated cylinder is achieved in the subsequent high frequency range. 相似文献
18.
In this paper, motion response of a moored floating structure interacting with a large amplitude and steep incident wave field is studied using a coupled time domain solution scheme. Solution of the hydrodynamic boundary value problem is achieved using a three-dimensional numerical wave tank (3D NWT) approach based upon a form of Mixed-Eulerian–Lagrangian (MEL) scheme. In the developed method, nonlinearity arising due to incident wave as well as nonlinear hydrostatics is completely captured while the hydrodynamic interactions of radiation and diffraction are determined at every time step based on certain simplifying approximations. Mooring lines are modelled as linear as well as nonlinear springs. The horizontal tension for each individual mooring line is obtained from the nonlinear load-excursion plot of the lines computed using catenary theory, from which the linear and nonlinear line stiffness are determined. Motions of three realistic floating structures with different mooring systems are analyzed considering various combinations of linear and approximate nonlinear hydrodynamic load computations and linear/nonlinear mooring line stiffness. Results are discussed to bring out the influence and need for consideration of nonlinearities in the hydrodynamics and hydrostatics as well as the nonlinear modelling of the line stiffness. 相似文献
19.
《Applied Ocean Research》2007,29(1-2):45-54
Catenary mooring lines are typically subjected to bimodal loads, comprising of a wave frequency (WF) component due to the first-order wave forces and a low frequency (LF) component induced by the second-order wave forces. For moored vessels, the LF forces due to current and wind also play a role. Only dynamic wave loads are considered herein, while current and wind loads are modeled as constant forces. Because of the nonlinearities of the mooring line characteristics, the dynamic line tension and the second-order responses, both the WF and LF line tensions are in principle nonGaussian. These facts make it difficult to estimate the combined fatigue damage of mooring lines in the frequency domain. A fatigue combination rule based on the Jiao and Moan’s theory has been extended to cover the nonGaussian case. The purpose of this paper is to improve and validate the frequency-domain method by time-domain analysis based on a simplified, but accurate mechanical model of the dynamic line tension. Improvements on the LF and combined fatigue damage estimation have been made by considering the nonsymmetrical property of the LF line tension distribution. Both the WF and LF mooring line tensions due to wave loading have been simulated in the time domain for different sea states and the combined fatigue damage has been estimated by using the rainflow cycle counting algorithm. The accuracy of the frequency-domain method for estimating the bimodal nonGaussian fatigue damage of mooring lines has been verified by the time-domain simulations and is considered to be acceptable. 相似文献
20.
This paper is concerned with the determination of dynamic load variations in the riser and yoke pivot components of an offshore vessel/mooring oil production and storage system.Forces on the yoke system arise from wave induced inertial and drag forces including current and motion due to vessel surge, heave and pitch.The analysis is carried out in the frequency domain and the results yield the limiting wave height for a specific design of SALS which will give rise to loss of tension in the riser. Also presented are the maximum horizontal and vertical components of load variation at the yoke pivoted connections with the vessel. 相似文献