首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到18条相似文献，搜索用时 343 毫秒
1.
The Jiama deposit is a large copper deposit in Tibet. Mineralization occurs in three different host rocks: skarn, hornfels and porphyry. A detailed fluid inclusion study was conducted for veins in the different host rocks to investigate the relationship between fluid evolution and ore-forming processes. Based on examination of cores from 36 drill holes, three types of veins(A, B and D) were identified in the porphyries, four types(Ⅰ,Ⅱ,Ⅲ andⅣ) in the skarn, and three(a, b and c) in the hornfels. The crosscutting relationships of the veins and that of the host rocks suggest two hydrothermal stages, one early and one late stage. Fluid inclusions indicate that the Jiama hydrothermal fluid system underwent at least two episodes of fluid boiling. The first boiling event occurred during the early hydrothermal stage, as recorded by fluid inclusions hosted in type A veins in the porphyries, type a veins in the hornfels, and wollastonite in the skarns. This fluid boiling event was associated with relatively weak mineralization. The second boiling event occurred in the late hydrothermal stage, as determined from fluid inclusions hosted in type B and D veins in the porphyries, type Ⅰ to Ⅳ veins in the skarns, and type b and c veins in the hornfels. This late boiling event, together with mixing with meteoric water, was responsible for more than 90% of the metal accumulation in the deposit. The first boiling only occurred in the central part of the deposit and the second boiling event took place across an entire interlayered structural zone between hornfels and marble. A spatial zoning of ore-elements is evident, and appears to be related to different migration pathways and precipitation temperatures of Cu, Mo, Pb, Zn, Au and Ag.  相似文献   

2.
The Dahutang tungsten polymetallic ore field is located north of the Nanling W-Sn polymetallic metallogenic belt and south of the Middle—Lower Yangtze River Valley Cu-Mo-Au-Fe porphyry-skarn belt.It is a newly discovered ore field,and probably represents the largest tungsten mineralization district in the world.The Shimensi deposit is one of the mineral deposits in the Dahutang ore field,and is associated with Yanshanian granites intruding into a Neoproterozoic granodiorite batholith.On the basis of geologic studies,this paper presents new petrographic,microthermometric,laser Raman spectroscopic and hydrogen and oxygen isotopic studies of fluid inclusions from the Shimensi deposit.The results show that there are three types of fluid inclusions in quartz from various mineralization stages:liquid-rich two-phase fluid inclusions,vapor-rich two-phase fluid inclusions,and three-phase fluid inclusions containing a solid crystal,with the vast majority being liquid-rich two-phase fluid inclusions.In addition,melt and melt-fluid inclusions were also found in quartz from pegmatoid bodies in the margin of the Yanshanian intrusion.The homogenization temperatures of liquid-rich two-phase fluid inclusions in quartz range from 162 to 363℃ and salinities are 0.5wt%-9.5wt%NaCI equivalent.From the early to late mineralization stages,with the decreasing of the homogenization temperature,the salinity also shows a decreasing trend.The ore-forming fluids can be approximated by a NaCl-H_2O fluid system,with small amounts of volatile components including CO_2,CH_4 and N_2,as suggested by Laser Raman spectroscopic analyses.The hydrogen and oxygen isotope data show that δ5D_(V-smow) values of bulk fluid inclusions in quartz from various mineralization stages vary from-63.8‰ to-108.4‰,and the δ~(18)O_(H2O) values calculated from the δ~(18)O_(V-)smow values of quartz vary from-2.28‰ to 7.21‰.These H-O isotopic data are interpreted to indicate that the ore-forming fluids are mainly composed of magmatic water in the early stage,and meteoric water was added and participated in mineralization in the late stage.Integrating the geological characteristics and analytical data,we propose that the ore-forming fluids of the Shimensi deposit were mainly derived from Yanshanian granitic magma,the evolution of which resulted in highly differentiated melt,as recorded by melt and melt-fluid inclusions in pegmatoid quartz,and high concentrations of metals in the fluids.Cooling of the ore-forming fluids and mixing with meteoric water may be the key factors that led to mineralization in the Dahutang tungsten polymetallic ore field.  相似文献   

3.
The Zhuxi deposit is a recently discovered W–Cu deposit located in the Jiangnan porphyry–skarn W belt in South China. The deposit has a resource of 3.44 million tonnes of WO3, making it the largest on Earth,however its origin and the evolution of its magmatic–hydrothermal system remain unclear, largely because alteration–mineralization types in this giant deposit have been less well-studied, apart from a study of the calcic skarn orebodies. The different types of mineralization can be classified into magnesian skarn, calcic skarn, and scheelite–quartz–muscovite(SQM) vein types. Field investigations and mineralogical analyses show that the magnesian skarn hosted by dolomitic limestone is characterized by garnet of the grossular–pyralspite(pyrope, almandine, and spessartine) series, diopside, serpentine,and Mg-rich chlorite. The calcic skarn hosted by limestone is characterized by garnet of the grossular–andradite series, hedenbergite, wollastonite, epidote, and Fe-rich chlorite. The SQM veins host highgrade W–Cu mineralization and have overprinted the magnesian and calcic skarn orebodies. Scheelite is intergrown with hydrous silicates in the retrograde skarn, or occurs with quartz, chalcopyrite, sulfide minerals, fluorite, and muscovite in the SQM veins.Fluid inclusion investigations of the gangue and ore minerals revealed the evolution of the ore-forming fluids, which involved:(1) melt and coexisting high–moderate-salinity, high-temperature, high-pressure(>450 ℃and >1.68 kbar), methane-bearing aqueous fluids that were trapped in prograde skarn minerals;(2) moderate–low-salinity, moderate-temperature, moderate-pressure(~210–300 ℃and ~0.64 kbar),methane-rich aqueous fluids that formed the retrograde skarn-type W orebodies;(3) low-salinity,moderate–low-temperature, moderate-pressure(~150–240 ℃and ~0.56 kbar), methane-rich aqueous fluids that formed the quartz–sulfide Cu(–W) orebodies in skarn;(4) moderate–low-salinity,moderate-temperature, low-pressure(~150–250 ℃and ~0.34 kbar) alkanes-dominated aqueous fluids in the SQM vein stage, which led to the formation of high-grade W–Cu orebodies. The S–Pb isotopic compositions of the sulfides suggest that the ore-forming materials were mainly derived from magma generated by crustal anatexis, with minor addition of a mantle component. The H–O isotopic compositions of quartz and scheelite indicate that the ore-forming fluids originated mainly from magmatic water with later addition of meteoric water. The C–O isotopic compositions of calcite indicate that the ore-forming fluid was originally derived from granitic magma, and then mixed with reduced fluid exsolved from local carbonate strata. Depressurization and resultant fluid boiling were key to precipitation of W in the retrograde skarn stage. Mixing of residual fluid with meteoric water led to a decrease in fluid salinity and Cu(–W) mineralization in the quartz–sulfide stage in skarn. The high-grade W–Cu mineralization in the SQM veins formed by multiple mechanisms, including fracturing, and fluid immiscibility, boiling, and mixing.  相似文献   

4.
A comprehensive contrast of ore-forming geological background and ore-forming fluid features, especially fluid ore-forming processes, has been performed between the Tianmashan and the Datuanshan ore deposits in Tongling, Anhui Province. The major reasons for the formation of the stratabound skarn Au-S ore deposit in Tianmashan and the stratabound skarn Cu ore deposit in Datuanshan are analyzed in accordance with this contrast. The magmatic pluton in Tianmashan is rich in Au and poor in Cu, but that in Datuanshan is rich in Cu and Au. The wallrock strata in Tianmashan contain Au-bearing pyrite layers with some organic substance but those in Datuanshan contain no such layers. Moreover, the ore-forming fluids in Tianmashan are dominantly magmatic ones at the oxide and sulfide stages, but those with high content of Cu in Datuanshan are mainly groundwater fluids. In addition, differences in compositional evolution and physicochemical condition variation of the ore-forming fluids result in gradual dispersion  相似文献   

5.
On the basis of detailed geological studies of the Wulong gold deposit, three metallogenic stages can be identified. With quartz fluid inclusions as an object of study, the authors investigated phase characteristics, compositional variations, temperature and pressure changes, fluid evolution, Pb isotope tracing and Rb-Sr isotopic dating of fluid inclusions entrapped in the above three metallogenic stages. The results show that Na+ is decreased obviously with metallogenic evolution, while K+ and other cations and gas compositions (H2, CO, CH4 and CO2) are increased slightly, and that the temperature and salinity vary in a pulsating manner along with the metallogenic evolution. Inverse calculation of hydrogen and oxygen isotopes indicate that at the first metallogenic stage the fluids were magmatic water, at the second stage they were dominated by magmatic water with a minor amount of meteoric water involved, and at the third stage, i.e., the final stage of metallogenesis, the fluids were composed complete  相似文献   

6.
The Kendekeke polymetallic deposit, located in the middle part of the magmatic arc belt of Qimantag on the southwestern margin of the Qaidam Basin, is a polygenetic compound deposit in the Qimantag metallogenic belt of Qinghai Province. Multi-periodic ore-forming processes occurred in this deposit, including early-stage iron mineralization and lead-zinc-gold-polymetallic mineralization which was controlled by later hydrothermal process. The characteristics of the ore-forming fluids and mineralization were discussed by using the fluid inclusion petrography, Laser Raman Spectrum and micro-thermometry methods. Three stages, namely, S1-stage(copper-iron-sulfide stage), S2-stage(lead-zinc-sulfide stage) and C-stage(carbonate stage) were included in the hydrothermal process as indicated by the results of this study. The fluid inclusions are in three types: aqueous inclusion(type I), CO2-aqueous inclusion(type II) and pure CO2 inclusion(type III). Type I inclusions were observed in the S1-stage, having homogenization temperature at 240–320oC, and salinities ranging from 19.8% to 25.0%(wt % NaCl equiv.). All three types of inclusions, existing as immiscible inclusion assemblages, were presented in the S2-stage, with the lowest homogenization temperature ranging from 175 oC to 295oC, which represents the metallogenic temperature of the S2-stage. The salinities of these inclusions are in the range of 1.5% to 16%. The fluid inclusions in the C-stage belong to types I, II and III, having homogenization temperatures at 120–210oC, and salinities ranging from 0.9% to 14.5%. These observations indicate that the ore-forming fluids evolved from high-temperature to lowtemperature, from high-salinity to low-salinity, from homogenization to immiscible separation. Results of Laser Raman Spectroscopy show that high density of CO2 and CH4 were found as gas compositions in the inclusions. CO2, worked as the pH buffer of ore-forming fluids, together with reduction of organic gases(i.e. CH4, etc), affected the transport and sediment of the minerals. The fluid system alternated between open and close systems, namely, between lithostatic pressure and hydrostatic pressure systems. The calculated metallogenic pressures are in the range of 30 to 87 Mpa corresponding to 3 km mineralization depth. Under the influence of tectonic movements, immiscible separation occurred in the original ore-forming fluids, which were derived from the previous highsalinity, high-temperature magmatic fluids. The separation of CO2 changed the physicochemical properties and composition of the original fluids, and then diluted by mixing with extraneous fluids such as meteoric water and groundwater, and metallogenic materials in the fluids such as lead, zinc and gold were precipitated.  相似文献   

7.
The recently discovered Damoqujia (大磨曲家) gold deposit is a large shear zone-hosted gold deposit of disseminated sulphides located in the north of the Zhaoping (招平) fault zone, Jiaodong (胶东) gold province, China. In order to distinguish the temperature range of cluster inclusions from different mineralization stages and measure their compositions, 16 fluid inclusions and 5 isotopic geochemistry samples were collected for this study. Corresponding to different mineralization stages, the multirange peaks of quartz decrepitation temperature (250-270, 310-360 and 380-430℃(2) indicate that the activity of ore-forming fluids is characterized by multistage. The ore-forming fluids were predominantly of high-temperature fluid system (HTFS) by CO2-rich, and SO2-4-K type magmatic fluid during the early stage of mineralization and were subsequently affected by low-temperature fluid system (LTFS) of CH4-rich, and Cl--Na /Ca2 type meteoric fluid during the late stage of mineralization. Gold is transferred by Au-HS- complex in the HTFS, and Au-Cl- complex can be more important in the LTFS. The transition of fluids from deeper to shallow environments results in mixing between the HTFS and LTFS, which might be one of the most key reasons for gold precipitation and large-scale mineralization. The ore-forming fluids are characterized by high-temperature, strong-activity, and superimposed mineralization, so that there is a great probability of forming large and rich ore deposit in the Damoqujia gold deposit. The main bodies are preserved and extend toward deeper parts, thereby suggesting a great potential in future.  相似文献   

8.
The Hujiayu Cu deposit,representative of the "HuBi-type" Cu deposits in the Zhongtiao Mountains district in the southern edge of the North China Craton,is primarily hosted in graphitebearing schists and carbonate rocks.The ore minerals comprise mainly chalcopyrite,with minor sphalerite,siegenite[(Co,Ni)_3S_4],and clausthalite[Pb(S,Se)].The gangue minerals are mainly quartz and dolomite,with minor albite.Four fluid inclusion types were recognized in the chalcopyrite-pyrite-dolomite-quartz veins,including CO_2-rich inclusions(type Ⅰ),low-salinity,liquid-dominated,biphase aqueous inclusions(type Ⅱ),solid-bearing aqueous inclusions(type Ⅲ),and solid-bearing aqueous-carbonic inclusions(type Ⅳ).Type I inclusion can be further divided into two sub-types,i.e.,monophase CO_2 inclusions(type Ⅰa) and biphase CO_2-rich inclusions(with a visible aqueous phase),and type Ⅲ inclusion is divided into a subtype with a halite daughter mineral(type Ⅲa) and a subtype with multiple solids(type Ⅲb).Various fluid inclusion assemblages(FIAs) were identified through petrographic observations,and were classified into four groups.The group-1 FIA,consisting of monophase CO_2 inclusions(type Ⅰa),homogenized into the liquid phase in a large range of temperatures from-1 to 28℃,suggesting post-entrapment modification.The group-2 FIA consists of type Ⅰb,Ⅲb and Ⅳ inclusions,and is interpreted to reflect fluid immiscibility.The group-3 FIA comprises type Ⅱ and Ⅲa inclusions,and the group-4FIA consists of type Ⅱ inclusions with consistent phase ratios.The group-1 and group-2 FIAs are interpreted to be entrapped during mineralization,whereas group-3 and group-4 FIAs probably represent the post-mineralization fluids.The solid CO_2 melting temperatures range from-60.6 to56.6℃ and from-66.0 to-63.4℃ for type Ⅰa and type Ⅳ inclusions,respectively.The homogenization temperatures for type Ⅱ inclusions range from 132 to 170℃ for group-3 FIAs and115 to 219℃ for group-4 FIAs.The halite melting temperatures range from 530 to 562℃ for typeⅢ b and Ⅳ inclusions,whereas those for type Ⅲa inclusions range from 198 to 398℃.Laser Raman and SEM-EDS results show that the gas species in fluid inclusions are mainly CO_2 with minor CH_4,and the solids are dominated by calcite and halite.The calcite in the hosting marble and dolomite in the hydrothermal veins have δ~(13)C_(V-pdb) values of-0.2 to 1.2‰ and-1.2 to-6.3‰,and δ~(18)O_(v-smow) values of 14.0 to 20.8 ‰ and 13.2 to 14.3‰,respectively.The fluid inclusion and carbon-oxygen isotope data suggest that the ore-forming fluids were probably derived from metamorphic fluids,which had reacted with organic matter in sedimentary rocks or graphite and undergone phase separation at 1.4-1.8 kbar and 230-240℃,after peak metamorphism.It is proposed that the Hujiayu Cu deposit consists of two mineralization stages.The early stage mineralization,characterized by disseminated and veinlet copper sulfides,probably took place in an environment similar to sediment-hosted stratiform copper mineralization.Ore minerals formed in this precursor mineralization stage were remobilized and enriched in the late metamorphic hydrothermal stage,leading to the formation of thick quartz-dolomite-sulfides veins.  相似文献   

9.
Saishitang Cu-polymetallic deposit is located in the southeast section of Late Paleozoic arcfold in the southeastern margin of Qaidam platform. Accoring to the geological process of the deposit,four mineralization episodes were identified: melt/fluid coexisting period(O),skarn period(A),first sulfide period(B) and second sulfide period(C),and 10 stages were finally subdivided. Three types of inclusions were classified in seven stages,namely crystal bearing inclusions(type I),aqueous inclusions(type II) and pure liquid inclusions(type III). Type I and II inclusions were observed in stage O1,having homogenization temperature from 252 to 431°C,and salinities ranging from 24.3% to 48.0%. Type I inclusion was present in stage A1,having homogenization temperature from 506 to 548°C,and salinities ranging from 39.4% to 44.6%. In stage B1,type II and III inclusions were observed,with homogenization temperature concentrating between 300–400°C,and salinities from 0.4% to 4.3%. Type II inclusions were present in stage B2,with homogenization temperature varying from 403 to 550°C. In stage C1,type I and II inclusion commonly coexisted,and constituted a boiling inclusion group,having homogenization temperatures at 187–463°C,and salinities in a range of 29.4%–46.8% and 2.2%–11.0%. Type II and III inclusions were developed in stage C2,having homogenization temperature at 124–350°C,and salinities ranging between 1.6% and 15.4%. In stage C3,type II and III inclusions were presented,with a homogenization temperature range of 164–360°C,and salinities varying from 4.0% to 11.0%. The results of micro-thermal analysis show that fluids are characterized by high temperature and high salinity in stage O1 and A1,and experienced slight decrease in temperature and dramatic decrease in salinity in stage B1 and B2. In stage C1,the salinity of fluid increased greatly and a further decrease of temperature and salinity occurred in stage C2 and C3. Fluids boiled in stage C1. With calculated pressure of 22 MPa from the trapping temperature of 284–289°C,a mineralization depth of 2.2 km was inferred. Results of Laser Raman Spectroscopy show high density of H2 O,CH4 and CO2 were found as gas composition. H-O isotope study indicates the oreforming fluids were the mixture of magmatic water and meteoric water. Physicochemical parameters of fluids show oxygen and sulfur fugacity experienced a decrease,and redox state is weakly reducing. Along with fluid evolution,oxidation has increased slightly. Comprehensive analysis shows that melt exsolution occurred during the formation of quartz diorite and that metal elements existed and migrated in the form of chlorine complex. Immiscible fluid separation and boiling widely occurred after addition of new fluids,bringing about dissociation of chlorine-complex,resulting in a great deal of copper precipitation. In conclusion,Saishitang deposit,controlled by regional tectonics,is formed by metasomatism between highly fractionated mineralization rock body and wall rock,and belongs to banded skarn Cu-polymetallic deposit.  相似文献   

10.
The Gaoshan gold-silver deposit, located between the Yuyao-Lishui Fault and JiangshanShaoxing fault in Longquan Area, occurs in the Suichang-Longquan gold-silver polymetallic metallogenic belt. This study conducted an investigation for ore-forming fluids using microthermometry, D-O isotope and trace element. The results show that two types of fluid inclusions involved into the formation of the deposit are pure liquid phase and gas-liquid phase aqueous inclusions. The homogenization temperature and salinity of major mineralization phase ranges from 156°C to 236°C(average 200°C) and 0.35% to 8.68%(NaCleqv)(average 3.68%), respectively, indicating that the ore-forming fluid is characteristic of low temperature and low salinity. The oreforming pressure ranges between in 118.02 to 232.13'105 pa, and it is estabmiated that the oreforming depth ranges from 0.39 to 0.77 km, indicating it is a hypabyssal deposit in genesis. The low rare earth elements content in pyrites, widely developed fluorite in late ore-forming stage and lack of chlorargyrite(Ag Cl), indicates that the ore-forming fluid is rich in F rather than Cl. The ratios of Y/Ho, Zr/Hf and Nb/Ta of between different samples have little difference, indicating that the later hydrothermal activities had no effects on the former hydrothermal fluid. The chondrite-normalized REE patterns of pyrites from country rocks and ore veins are basically identical, with the characteristics of light REE enrichment and negative Eu anomalies, implying that the ore-forming fluid was oxidative and derived partly from the country rocks. The δD and δ18O of fluid inclusions in quartz formed during the main metallogenic stage range from -105‰ to -69 ‰ and -6.01‰ to -3.81‰, respectively. The D-O isotopic diagram shows that the metallogenic fluid is characterized by the mixing of formation water and meteoric water, without involvement of magmatic water. The geological and geochemical characteristics of the Gaoshan gold-silver deposit are similar to those of continental volcanic hydrothermal deposit, and could be assigned to the continental volcanic hydrothermal gold-silver deposit type.  相似文献   

11.
孙康  曹毅  张伟  赵洋 《现代地质》2021,35(5):1371-1379
安徽青阳铜矿里钼多金属矿床是长江中下游成矿带内近年来新发现的一个夕卡岩型钼多金属矿床。对该矿床的地质特征和流体包裹体特征进行了详细研究,探讨了流体来源与演化过程。基于脉体穿插和矿物交代关系将铜矿里矿床的成矿过程划分为早期夕卡岩、晚期夕卡岩、石英辉钼矿、石英多金属硫化物和碳酸盐矿物5个阶段。显微观察表明铜矿里矿床的流体包裹体类型主要为富液相包裹体、富气相包裹体和含子晶三相包裹体。显微测温结果显示,早期成矿流体具有高温、中高盐度的特征,而晚期成矿流体具有低温、低盐度的特征。结合已有的氢、氧同位素数据,表明铜矿里矿床早期热液为岩浆热液,晚期有大气水加入。石英辉钼矿阶段石英中出现富液相、含子晶三相和富气相包裹体共存的现象,且这些包裹体均一温度相近,但均一方式截然不同,表明流体沸腾作用可能是导致铜矿里钼多金属矿床中钼元素沉淀的主要机制。  相似文献   

12.
The Nuri Cu‐W‐Mo deposit is located in the southern subzone of the Cenozoic Gangdese Cu‐Mo metallogenic belt. The intrusive rocks exposed in the Nuri ore district consist of quartz diorite, granodiorite, monzogranite, granite porphyry, quartz diorite porphyrite and granodiorite porphyry, all of which intrude in the Cretaceous strata of the Bima Group. Owing to the intense metasomatism and hydrothermal alteration, carbonate rocks of the Bima Group form stratiform skarn and hornfels. The mineralization at the Nuri deposit is dominated by skarn, quartz vein and porphyry type. Ore minerals are chalcopyrite, pyrite, molybdenite, scheelite, bornite and tetrahedrite, etc. The oxidized orebodies contain malachite and covellite on the surface. The mineralization of the Nuri deposit is divided into skarn stage, retrograde stage, oxide stage, quartz‐polymetallic sulfide stage and quartz‐carbonate stage. Detailed petrographic observation on the fluid inclusions in garnet, scheelite and quartz from the different stages shows that there are four types of primary fluid inclusions: two‐phase aqueous inclusions, daughter mineral‐bearing multiphase inclusions, CO2‐rich inclusions and single‐phase inclusions. The homogenization temperature of the fluid inclusions are 280°C–386°C (skarn stage), 200°C–340°C (oxide stage), 140°C–375°C (quartz‐polymetallic sulfide stage) and 160°C–280°C (quartz‐carbonate stage), showing a temperature decreasing trend from the skarn stage to the quartz‐carbonate stage. The salinity of the corresponding stages are 2.9%–49.7 wt% (NaCl) equiv., 2.1%–7.2 wt% (NaCl) equiv., 2.6%–55.8 wt% (NaCl) equiv. and 1.2%–15.3 wt% (NaCl) equiv., respectively. The analyses of CO2‐rich inclusions suggest that the ore‐forming pressures are 22.1 M Pa–50.4 M Pa, corresponding to the depth of 0.9 km–2.2 km. The Laser Raman spectrum of the inclusions shows the fluid compositions are dominated in H2O, with some CO2 and very little CH4, N2, etc. δD values of garnet are between ?114.4‰ and ?108.7‰ and δ18OH2O between 5.9‰ and 6.7‰; δD of scheelite range from ?103.2‰ to ?101.29‰ and δ18OH2O values between 2.17‰ and 4.09‰; δD of quartz between ?110.2‰ and ?92.5‰ and δ18OH2O between ?3.5‰ and 4.3‰. The results indicate that the fluid came from a deep magmatic hydrothermal system, and the proportion of meteoric water increased during the migration of original fluid. The δ34S values of sulfides, concentrated in a rage between ?0.32‰ to 2.5‰, show that the sulfur has a homogeneous source with characteristics of magmatic sulfur. The characters of fluid inclusions, combined with hydrogen‐oxygen and sulfur isotopes data, show that the ore‐forming fluids of the Nuri deposit formed by a relatively high temperature, high salinity fluid originated from magma, which mixed with low temperature, low salinity meteoric water during the evolution. The fluid flow through wall carbonate rocks resulted in the formation of layered skarn and generated CO2 or other gases. During the reaction, the ore‐forming fluid boiled and produced fractures when the pressure exceeded the overburden pressure. Themeteoric water mixed with the ore‐forming fluid along the fractures. The boiling changed the pressure and temperature, oxygen fugacity, physical and chemical conditions of the whole mineralization system. The escape of CO2 from the fluid by boiling resulted in scheelite precipitation. The fluid mixing and boiling reduced the solubility of metal sulfides and led the precipitation of chalcopyrite, molybdenite, pyrite and other sulfide.  相似文献   

13.
大张铁矿是鲁西地区近年来新发现的一个重要的矽卡岩型矿床.矿体主要赋存于石英二长闪长岩与奥陶系马家沟组灰岩接触带及其附近.根据脉体穿插关系和交代蚀变特征,将大张矽卡岩型铁矿床成矿过程划分为矽卡岩阶段、氧化物阶段、硫化物阶段和碳酸盐阶段.通过对透辉石、绿帘石、石英和方解石等透明矿物显微观察发现,大张铁矿中流体包裹体类型主要...  相似文献   

14.
The Haobugao deposit, located in the southern segment of the Great Xing'an Range, is a famous skarn‐related Pb‐Zn‐(Cu)‐(Fe) deposit in northern China. The results of our fluid inclusion research indicate that garnets of the early stage (I skarn stage) contain three types of fluid inclusions (consistent with the Mesozoic granites): vapor‐rich inclusions (type LV, with VH2O/(VH2O + LH2O) < 50 vol %, and the majority are 5–25 vol %), liquid‐rich two‐phase aqueous inclusions (type VL, with VH2O/(VH2O + LH2O) > 50 vol %, the majority are 60–80 vol %), and halite‐bearing multiphase inclusions (type SL). These different types of fluid inclusions are totally homogenized at similar temperatures (around 320–420°C), indicating that the ore‐forming fluids of the early mineralization stage may belong to a boiling fluid system. The hydrothermal fluids of the middle mineralization stage (II, magnetite‐quartz) are characterized by liquid‐rich two‐phase aqueous inclusions (type VL, homogenization temperatures of 309–439°C and salinities of 9.5–14.9 wt % NaCl eqv.) that coexist with vapor‐rich inclusions (type LV, homogenization temperatures of 284–365°C and salinities of 5.2–10.4 wt % NaCl eqv.). Minerals of the late mineralization stage (III sulfide‐quartz stage and IV sulfide‐calcite stage) only contain liquid‐rich aqueous inclusions (type VL). These inclusions are totally homogenized at temperatures of 145–240°C, and the calculated salinities range from 2.0 to 12.6 wt % NaCl eqv. Therefore, the ore‐forming fluids of the late stage are NaCl‐H2O‐type hydrothermal solutions of low to medium temperature and low salinity. The δD values and calculated δ18OSMOW values of ore‐forming fluids of the deposit are in the range of ?4.8 to 2.65‰ and ?127.3‰ to ?144.1‰, respectively, indicating that ore‐forming fluids of the Haobugao deposit originated from the mixing of magmatic fluid and meteoric water. The S‐Pb isotopic compositions of sulfides indicate that the ore‐forming materials are mainly derived from underlying magma. Zircon grains from the mineralization‐related granite in the mining area yield a weighted 206Pb/238U mean age of 144.8 ±0.8 Ma, which is consistent with a molybdenite Re‐Os model age (140.3 ±3.4 Ma). Therefore, the Haobugao deposit formed in the Early Cretaceous, and it is the product of a magmatic hydrothermal system.  相似文献   

15.
The Baizhangyan skarn‐porphyry type W–Mo deposit is located in a newly defined Mo–W–Pb–Zn metallogenic belt, which is in the south of Middle‐Lower Yangtze Valley Cu–Fe–Au polymetallic metallogenic belt in SE China. The W–Mo orebodies occur mainly within the contact zone between fine‐grained granite and Sinian limestone strata. There are two types of W–Mo mineralization: major skarn W–Mo mineralization and minor granite‐hosted disseminated Mo mineralization which was traced by drilling at depth. Eight molybdenite samples from Mo‐bearing ores yield Re–Os dates that overlap within analytical error, with a weighted average age of 134.1 ± 2.2 Ma. These dates are in close agreement with SIMS U–Pb concordant zircon age for fine‐grained granite at 133.3 ± 1.3 Ma, indicating that crystallization of the granite and hydrothermal molybdenite formation were coeval and likely cogenetic. The Baizhangyan W–Mo deposit formed in the Early Cretaceous extensional tectonic setting at the Middle‐Lower Yangtze Valley metallogenic belt and the Jaingnan Ancient Continent. Based on mineral compositions and crosscutting relationships of veinlets, hydrothermal alteration and mineralization, the ore mineral paragenesis of the Baizhangyan deposit is divided into four stages: skarn stage (I), oxide stage (II), sulfide stage (III), and carbonate stage (IV). Fluid inclusions in garnet, scheelite, quartz and calcite from W–Mo ores are mainly aqueous‐rich (L + V) type inclusions. Following garnet deposition at stage I, the high‐temperature fluids gave way to progressively cooler, more dilute fluids associated with tungsten–molybdenite–base metal sulfide deposition (stage II and stage III) (162–360°C, 2.7–13.2 wt % NaCl equivalent) and carbonate deposition (stage IV) (137–190°C, 0.9–5 wt % NaCl equiv.). Hydrogen‐oxygen isotope data from minerals of different stages suggest that the ore‐forming fluids consisted of magmatic water, mixed in various proportions with meteoric water. From stage I to stage IV, there is a systematic decrease in the homogenization temperature of the fluid‐inclusion fluids and calculated δ18O values of the fluids. These suggest that increasing involvement of formation water or meteoric water during the fluid ascent resulted in successive deposition of scheelite and molybdenite at Baizhangyan.  相似文献   

16.
The Antuoling Mo deposit is a major porphyry‐type deposit in the polymetallic metallogenic belt of the northern Taihang Mountains, China. The processes of mineralization in this deposit can be divided into three stages: an early quartz–pyrite stage, a middle quartz–polymetallic sulfide stage, and a late quartz–carbonate stage. Four types of primary fluid inclusions are found in the deposit: two‐phase aqueous inclusions, daughter‐mineral‐bearing multiphase inclusions, CO2–H2O inclusions, and pure CO2 inclusions. From the early to the late ore‐forming stages, the homogenization temperatures of the fluid inclusions are 300 to >500°C, 270–425°C, and 195–330°C, respectively, with salinities of up to 50.2 wt%, 5.3–47.3 wt%, and 2.2–10.4 wt% NaCl equivalent, revealing that the ore‐forming fluids changed from high temperature and high salinity to lower temperature and lower salinity. Moreover, based on the laser Raman spectra, the compositions of the fluid inclusions evolved from the NaCl–CO2–H2O to the NaCl–H2O system. The δ18OH2O and δD values of quartz in the deposit range from +3.9‰ to +7.0‰ and ?117.5‰ to ?134.2‰, respectively, reflecting the δD of local meteoric water after oxygen isotopic exchange with host rocks. The Pb isotope values of the sulfides (208Pb/204Pb, 36.320–37.428; 207Pb/204Pb, 15.210–15.495; 206Pb/204Pb, 16.366–17.822) indicate that the ore‐forming materials originated from a mixed upper mantle–lower crust source.  相似文献   

17.
马坑铁矿是福建省一个大型铁钼铅锌多金属矿床,赋存于莒舟-大洋花岗岩外接触带上石炭统经畲组-下二叠统栖霞 组大理岩与下石炭统林地组石英砂岩之间,矿化阶段经历了从无水矽卡岩阶段（钙铁榴石-透辉石） →含水矽卡岩-磁铁矿 阶段（绿帘石-阳起石-绿泥石-钙铁辉石） →硫化物阶段（石英-方解石-萤石-黄铁矿-闪锌矿） →碳酸盐岩阶段（石英-方 解石） 演变,而本文对含水矽卡岩-磁铁矿阶段和硫化物阶段中的钙铁辉石、萤石、石英及方解石中流体包裹体所进行岩 相学观察和显微测温研究表明,早期含水矽卡岩-磁铁矿阶段包裹体类型主要有含NaCl子晶三相包裹体和富液相两相包裹 体,少量富气相两相包裹体;而晚期硫化物阶段包裹体类型主要为富液相两相包裹体。含水矽卡岩-磁铁矿阶段流体出现 流体沸腾作用,流体温度范围为448~596℃,两端员组分流体盐度分别为26.5~48.4 wt % NaCl equiv.和2.4~6.9 wt % NaCl equiv.;硫化物阶段流体呈现出混合趋势,流体温度和盐度分别为182~343℃和1.9~20.1 wt % NaCl equiv.。流体包裹体的均 一温度和盐度的研究结果表明含水矽卡岩-磁铁矿阶段流体主要来自岩浆水,而硫化物阶段流体以岩浆水为主,并有大气 降水加入。由于马坑铁矿化形成于含水矽卡岩阶段,铅锌矿化则形成于硫化物阶段,流体沸腾是导致马坑铁矿床形成的主 要因素,而流体混合则是引起马坑铁矿床铅锌矿化的主要因素。综合地质与地球化学研究,马坑铁矿床应属于与莒舟-大 洋花岗岩有关的矽卡岩型铁矿床。  相似文献   

18.
The Yangla deposit is an intrusion‐related Cu deposit in the Jinshajiang tectonic belt (eastern Sanjiang region, SW China). Despite extensive studies that have been conducted on this deposit, the relationship between the granitic magma and Cu mineralization is still unclear, and hence, the genesis is debated. To answer this question, we conducted an integrated study of mineralogy, fluid inclusions (FIs), and hydrogen and oxygen (H‐O) isotopes. Three mineralization stages were identified based on the ore textures, alteration zonation, and crosscutting relationships: (i) pre‐ore prograde skarn (stage I), with the garnet and pyroxene dominated by andradite and diopside, respectively; (ii) syn‐ore retrograde alteration (stage II), which is subdivided into the early syn‐ore stage (stage IIa) marked by retrograde hydrated mineral assemblages and significant Fe‐Cu‐Mo‐Pb‐Zn sulfide mineralization, and the late syn‐ore stage (stage IIb) featured by quartz‐calcite veins; and (iii) late supergene mineralization (stage III), which is characterized by secondary azurite and malachite. These results of mineralogy, FIs, and H‐O isotopes indicate that: (i) Cu mineralization has a close temporal, spatial, and genetic relationship with skarn alteration; (ii) the ore fluids were magmatic dominated with late‐stage meteoric water incursion; and (iii) Type‐S (halite‐bearing) and Type‐V (vapor‐rich) FIs coexisted in garnet and clinopyroxene of stage I, indicating that fluid boiling might have occurred during this stage. From stage I to stage IIa, the FI type transformed from Type‐S + Type‐V + Type‐L (liquid‐rich) to Type‐V + Type‐L with the conduct of mineralization and was accompanied by the disappearance of Type‐S, and homogenization temperature and salinity also tended to decrease dramatically, which may be caused by the deposition of skarn minerals. At stage IIa, boiling of the ore fluids still continued due to the change from lithostatic to hydrostatic pressure, which triggered the precipitation of abundant quartz‐Cu‐Mo‐Fe sulfides. Furthermore, fluid mixing between a high‐temperature magmatic fluid and a low‐temperature meteoric water might cause a considerable drop in temperature and the deposition of Cu‐bearing quartz/calcite veins during stage IIb. Hence, we consider the Yangla deposit to be of a skarn type, genetically related to the Mesozoic magmatism in the Sanjiang region.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号