共查询到20条相似文献，搜索用时 705 毫秒
1.
2.
利用SVM的全极化、双极化与单极化SAR图像分类性能的比较 总被引：1，自引：0，他引：1
支持向量机(SVM)以其在小训练样本时良好的分类性能,目前已广泛应用于多个领域.本文在极化SAR图像特征提取基础上,将SVM应用于极化SAR图像分类,定性和定量地比较了全极化、双极化和单极化SAR图像的分类性能,分析了不同的极化组合对分类结果的影响,并根据地物极化散射特性分析了分类精度差异的成因.实测极化SAR数据的实验结果表明,全极化数据能获得最好的分类性能,双极化次之,单极化最低,且在某些情况下,双极化与全极化分类性能接近. 相似文献
3.
Optimizing support vector machine learning for semi-arid vegetation mapping by using clustering analysis 总被引：1，自引：0，他引：1
In remote sensing communities, support vector machine (SVM) learning has recently received increasing attention. SVM learning usually requires large memory and enormous amounts of computation time on large training sets. According to SVM algorithms, the SVM classification decision function is fully determined by support vectors, which compose a subset of the training sets. In this regard, a solution to optimize SVM learning is to efficiently reduce training sets. In this paper, a data reduction method based on agglomerative hierarchical clustering is proposed to obtain smaller training sets for SVM learning. Using a multiple angle remote sensing dataset of a semi-arid region, the effectiveness of the proposed method is evaluated by classification experiments with a series of reduced training sets. The experiments show that there is no loss of SVM accuracy when the original training set is reduced to 34% using the proposed approach. Maximum likelihood classification (MLC) also is applied on the reduced training sets. The results show that MLC can also maintain the classification accuracy. This implies that the most informative data instances can be retained by this approach. 相似文献
4.
Vishakha Sood Sheifali Gupta Hemendra Singh Gusain Sartajvir Singh 《Journal of the Indian Society of Remote Sensing》2018,46(12):1991-2002
In recent years, the significant increase in research on spatial information is observed. Classification or clustering is one of the well-known methods in spatial data analysis. Traditionally, classifiers are generally based on per-pixel approaches and are not utilizing the spatial information within pixel, called mixels which is an important source of information to image classification. There are two foremost reasons behind the existence of mixels: (a) coarse or low spatial resolution of sensor and (b) topographic effects that recorded on optical satellite imagery due to differential terrain illuminations over rugged areas such as Himalayas. In the present study, different classification algorithms have been implemented to drive the impact of topography on them. Among various available, three algorithms for the mapping of snow cover region over north Indian Himalayas (India) are compared: (a) maximum likelihood classification (MLC) as supervised classifier; (b) k-mean clustering as unsupervised classifier; and (c) linear spectral mixing model (LSMM) as soft classifier. These algorithms have been implemented on AWiFS multispectral data, and analysis was carried out. The classification accuracy is estimated by the error matrices, and LSMM achieved higher accuracy (84.5–88.5%) as compared to MLC (81–84%) and k-mean (74–81%). The results highlight that topographically derived classifiers achieved better accuracy in mapping as compared to simple classifiers. The study has many applications in snow hydrology, glaciology and climatology of mountain topography. 相似文献
5.
Automatic extraction of urban features from high resolution satellite images is one of the main applications in remote sensing. It is useful for wide scale applications, namely: urban planning, urban mapping, disaster management, GIS (geographic information systems) updating, and military target detection. One common approach to detecting urban features from high resolution images is to use automatic classification methods. This paper has four main objectives with respect to detecting buildings. The first objective is to compare the performance of the most notable supervised classification algorithms, including the maximum likelihood classifier (MLC) and the support vector machine (SVM). In this experiment the primary consideration is the impact of kernel configuration on the performance of the SVM. The second objective of the study is to explore the suitability of integrating additional bands, namely first principal component (1st PC) and the intensity image, for original data for multi classification approaches. The performance evaluation of classification results is done using two different accuracy assessment methods: pixel based and object based approaches, which reflect the third aim of the study. The objective here is to demonstrate the differences in the evaluation of accuracies of classification methods. Considering consistency, the same set of ground truth data which is produced by labeling the building boundaries in the GIS environment is used for accuracy assessment. Lastly, the fourth aim is to experimentally evaluate variation in the accuracy of classifiers for six different real situations in order to identify the impact of spatial and spectral diversity on results. The method is applied to Quickbird images for various urban complexity levels, extending from simple to complex urban patterns. The simple surface type includes a regular urban area with low density and systematic buildings with brick rooftops. The complex surface type involves almost all kinds of challenges, such as high dense build up areas, regions with bare soil, and small and large buildings with different rooftops, such as concrete, brick, and metal.Using the pixel based accuracy assessment it was shown that the percent building detection (PBD) and quality percent (QP) of the MLC and SVM depend on the complexity and texture variation of the region. Generally, PBD values range between 70% and 90% for the MLC and SVM, respectively. No substantial improvements were observed when the SVM and MLC classifications were developed by the addition of more variables, instead of the use of only four bands. In the evaluation of object based accuracy assessment, it was demonstrated that while MLC and SVM provide higher rates of correct detection, they also provide higher rates of false alarms. 相似文献
6.
Inderjit Singh 《Journal of the Indian Society of Remote Sensing》1988,16(4):43-52
LANDSAT-TM has been evaluated for forest cover type and landuse classification in subtropical forests of Kumaon Himalaya (U.P.) Comparative evaluation of false colour composite generated by using various band combinations has been made. Digital image processing of Landsat-TM data on VIPS-32 RRSSC computer system has been carried out to stratify vegetation types. Conventional band combination in false colour composite is Bands 2, 3 and 4 in Red/Green/Blue sequence of Landsat TM for landuse classification. The present study however suggests that false colour combination using Landsat TM bands viz., 4, 5 and 3 in Red/Green/Blue sequence is the most suitable for visual interpretation of various forest cover types and landuse classes. It is felt that to extract full information from increased spatial and spectral resolution of Landsat TM, it is necessary to process the data digitally to classify land cover features like vegetation. Supervised classification using maximum likelihood algorithm has been attemped to stratify the forest vegetation. Only four bands are sufficient enough to classify vegetaton types. These bands are 2,3,4 and 5. The classification results were smoothed digitaly to increase the readiability of the map. Finally, the classification carred out using digital technique were evaluated using systematic sampling design. It is observed that forest cover type mapping can be achieved upto 80% overall mapping accuracy. Monospecies stand Chirpine can be mapped in two density classes viz., dense pine (<40%) with more than 90% accuracy. Poor accuracy (66%) was observed while mapping pine medium dense areas. The digital smoothening reduced the overall mapping accuracy. Conclusively, Landsat-TM can be used as operatonal sensor for forest cover type mapping even in complex landuse-terrain of Kumaon Himalaya (U.P.) 相似文献
7.
以地块分类为核心的冬小麦种植面积遥感估算 总被引：5，自引：0，他引：5
以提高冬小麦种植面积估算精度为目标,选取种植结构复杂的都市农业区,采用QuickBird影像数字化农田地块边界,以多时相TM影像为核心数据源,以地块为基本分类单元,进行不同特征向量组合、不同分类器的冬小麦地块分类方法研究,并对比分析了基于地块分类和基于像元分类的冬小麦种植面积估算精度。研究结果表明,基于地块分类的冬小麦种植面积估算方法的总量精度和位置精度均高于像元分类;植被指数和纹理信息的引入有助于进一步提高地块分类精度;支持向量机与最大似然均能得到高达97%的总量精度和90%的位置精度,支持向量机地块分类所需的训练样本量远低于最大似然,因此支持向量机更加适合于冬小麦地块分类;冬小麦错分与漏分情况大多发生在细碎地块,其面积总量较小,而大地块错分和漏分较少,因此相对于像元分类,地块分类能在整个区域能得到较高的冬小麦位置精度和总量精度。 相似文献
8.
9.
多时相双极化合成孔径雷达干涉测量土地覆盖分类方法 总被引：5，自引：1，他引：4
综合采用时相、极化和干涉3种维度的SAR数据进行土地覆盖分类。以黑龙江省逊克县多时相ALOS PALSAR数据覆盖区为研究区,利用不同时相极化SAR、干涉SAR信号对地物特征的敏感性,结合后向散射强度和干涉相干的时变特征进行地物解译,发展了基于多时相、多极化、干涉SAR数据的SVM土地覆盖分类方法。研究结果表明,引入双极化SAR中不同极化(HH-HV)间的相干系数,并结合所选择的时相特征、极化特征以及干涉相干特征进行分类,可解决双极化SAR影像中林地与城市及建设用地的混分问题,得到更高精度的土地覆盖分类结果。 相似文献
10.
An effective ensemble classification framework using random forests and a correlation based feature selection technique 
下载免费PDF全文
下载免费PDF全文 Dibyajyoti Chutia Dhruba Kumar Bhattacharyya Jaganath Sarma Penumetcha Narasa Lakshmi Raju 《Transactions in GIS》2017,21(6):1165-1178
Accurate classification of heterogeneous land surfaces with homogeneous land cover classes is a challenging task as satellite images are characterized by a large number of features in the spectral and spatial domains. The identifying relevance of a feature or feature set is an important task for designing an effective classification scheme. Here, an ensemble of random forests (RF) classifiers is realized on the basis of relevance of features. Correlation‐based Feature Selection (CFS) was utilized to assess the relevance of a subset of features by studying the individual predictive ability of each feature along with the degree of redundancy between them. Predictability of RF was greatly improved by random selection of the relevant features in each of the splits. An investigation was carried out on different types of images from the Landsat Enhanced Thematic Mapper Plus (Landsat ETM+) and QuickBird sensors. It has been observed that the performance of the RF classifier was significantly improved while using the optimal set of relevant features compared with a few of the most advanced supervised classifiers such as maximum likelihood classifier (MLC), Navie Bayes, multi‐layer perception (MLP), support vector machine (SVM) and bagging. 相似文献
11.
舒宁 《武汉大学学报(信息科学版)》1988,(4)
本文从目视解译信息空间的模拟、模式维数对模式样本集线性可分性的影响、模式空间各模式类别可分性测度OIF指数及迹准则判断原理等模式识别原理出发,初步讨论了在遥感影象自动分类中利用辅助数据的理论依据,并以藏北西扎地区草资源调查中利用辅助数据进行自动分类的实例说明辅助数据提高自动分类精度的有效性。 相似文献
12.
Single, interferometric dual, and quad-polarization mode data were evaluated for the characterization and classification of seven land use classes in an area with shifting cultivation practices located in the Eastern Amazon (Brazil). The Advanced Land-Observing Satellite (ALOS) Phased Array L-band Synthetic Aperture Radar (PALSAR) data were acquired during a six month interval. A clear-sky Landsat-5/TM image acquired at the same period was used as additional ground reference and as ancillary input data in the classification scheme. We evaluated backscattering intensity, polarimetric features, interferometric coherence and texture parameters for classification purposes using support vector machines (SVM) and feature selection. Results showed that the forest classes were characterized by low temporal backscattering intensity variability, low coherence and high entropy. Quad polarization mode performed better than dual and single polarizations but overall accuracies remain low and were affected by precipitation events on the date and prior SAR date acquisition. Misclassifications were reduced by integrating Landsat data and an overall accuracy of 85% was attained. The integration of Landsat to both quad and dual polarization modes showed similarity at the 5% significance level. SVM was not affected by SAR dimensionality and feature selection technique reveals that co-polarized channels as well as SAR derived parameters such as Alpha-Entropy decomposition were important ranked features after Landsat’ near-infrared and green bands. We show that in absence of Landsat data, polarimetric features extracted from quad-polarization L-band increase classification accuracies when compared to single and dual polarization alone. We argue that the joint analysis of SAR and their derived parameters with optical data performs even better and thus encourage the further development of joint techniques under the Reducing Emissions from Deforestation and Degradation (REDD) mechanism. 相似文献
13.
从支持向量机的基本理论出发,结合高光谱数据的分离性测度,提出了一种基于分离性测度的二叉树多类支持向量机分类器,并用OMIS传感器获得的高光谱遥感数据和Hyperion高光谱遥感数据进行实验,分析比较了各种多类SVM的分类精度,并和传统的光谱角制图和最小距离分类算法进行了比较。结果表明,SVM进行高光谱分类时,基于分离性测度的二叉树多支持向量机的分类精度最高。 相似文献
14.
15.
本文利用多时相Landsat TM/ETM+影像分析了兖州市1998年和2002年的土地利用/覆盖变化。综合考虑波段间相关系数和OIF指数,选择最佳波段组合进行图像解译,并在此基础上运用最大似然分类器(MLC)和支持向量机(SVM)的分类方法对遥感影像进行分类。进而利用SVM分类结果进行土地利用遥感动态监测,获取兖州市土地利用/覆盖变化信息,并与社会经济统计资料的统计结果进行比较。最后提取TM/ETM+影像的RDVI,基于线性混合像元分解模型分析了植被覆盖的变化。结果表明,基于多时相TM/ETM+影像分析的土地利用/覆盖变化与实际统计数据较吻合,适合动态监测土地利用变化,且精度较高。 相似文献
16.
基于龙岩市多时相Landsat TM/ETM+数据,应用最大似然、决策树及支持向量机分类方法对龙岩市景观类型进行分类.从3种分类方法的比较得知,支持向量机分类方法表现出较高的性能,分类精度明显高于其他的分类方法.因此选择最佳的支持向量机分类结果,并结合景观生态学方法,分析了1992-2008年龙岩市新罗区景观格局及其动态变化信息.结果表明,1992-2008年新罗区主城区农业用地大幅度降低,相应转化为建筑用地,但是却保持着良好的森林覆盖率.同时城市景观组分经历了由扩散式增长过程到粘合式集聚增长过程的转变,城市形态由不稳定形态逐步向稳定形态演化.整体上而言,城市景观呈现出破碎度变小、多样性降低和聚集度升高的发展趋势,建筑用地是龙岩市新罗区的主要景观类型. 相似文献
17.
针对高分辨率影像上日光温室的信息提取问题,该文提出了利用支持向量机、最近邻算法结合纹理特征在不同层上分别提取连片日光温室和独栋日光温室的方法。实验表明:纹理特征能提高分类精度,在大尺度的层上,分类精度提升幅度较大,但在小尺度的层上,分类精度提升幅度会比较小;并不是参与运算特征数越多,分类精度越高,多数情况下光谱+纹理组合的分类精度最高;提取连片日光温室的最优方案是支持向量机和光谱+形状+纹理(7像素×7像素),总精度为92.86%,Kappa系数为0.90,而提取独栋日光温室最优方案为SVM和光谱+纹理(11像素×11像素),总精度为88.39%,Kappa系数为0.86。 相似文献
18.
提出了一种基于误差分析的组合分类器,通过结合两种监督分类方法,提出的算法分别估计了两种监督分类方法在计算过程中的误差,给出了规则输出的置信区间,再根据置信区间的大小对两种分类方法的输出结果进行加权平均,从而得到更精确的规则输出.利用该方法对遥感图像进行分类实验,在不同训练样本分布与不同训练样本数量的情况下,比较新的组合分类器与单一分类器的精度.结果表明新的组合分类器能够取得比单一的分类器更高的分类精度.结果还显示出,两个分类器的独立性越强,组合分类器的效果越好.另外一个实验比较了新的组合分类器与和式规则组合分类器的分类精度,结果仍显示出了新方法的优越性. 相似文献
19.
Image classification from remote sensing is becoming increasingly urgent for monitoring environmental changes. Exploring effective algorithms to increase classification accuracy is critical. This paper explores the use of multispectral HJ1B and ALOS (Advanced Land Observing Satellite) PALSAR L-band (Phased Array type L-band Synthetic Aperture Radar) for land cover classification using learning-based algorithms. Pixel-based and object-based image analysis approaches for classifying HJ1B data and the HJ1B and ALOS/PALSAR fused-images were compared using two machine learning algorithms, support vector machine (SVM) and random forest (RF), to test which algorithm can achieve the best classification accuracy in arid and semiarid regions. The overall accuracies of the pixel-based (Fused data: 79.0%; HJ1B data: 81.46%) and object-based classifications (Fused data: 80.0%; HJ1B data: 76.9%) were relatively close when using the SVM classifier. The pixel-based classification achieved a high overall accuracy (85.5%) using the RF algorithm for classifying the fused data, whereas the RF classifier using the object-based image analysis produced a lower overall accuracy (70.2%). The study demonstrates that the pixel-based classification utilized fewer variables and performed relatively better than the object-based classification using HJ1B imagery and the fused data. Generally, the integration of the HJ1B and ALOS/PALSAR imagery can improve the overall accuracy of 5.7% using the pixel-based image analysis and RF classifier. 相似文献
20.
薇甘菊是危害最严重的外来入侵物种之一，其生长与传播极其迅速，对我国森林生态系统造成了严重破坏，相关管理部门需要一个有效的薇甘菊监测手段。传统人工调查方式需要投入大量的人力物力，成本高昂、效率低下；近年来快速发展的高光谱遥感技术为薇甘菊的监测提供了新思路。本文以无人机搭载的Nano-Hyperspec高光谱仪获取的广东省增城林场遥感影像数据为基础，对高光谱数据进行几何校正、影像降噪处理、辐射定标及坏带波段剔除等影像预处理；运用最佳指数因子法（OIF）、自适应波段法（ABS）、自动子空间划分（ASP）与自适应波段相结合的波段选择法（ASP+ABS）3种方法进行波段选择，获取信息量较大且波段间相关性较低的特征波段组成薇甘菊分类最佳波段组合，生成3幅遥感影像；最后采用支持向量机方法（SVM）对生成的3幅不同遥感影像进行分类，以分类结果的精度评价3种波段组合对薇甘菊高光谱特征的响应程度，选出更能反映薇甘菊的光谱特征的波段组合。试验结果表明，针对Nano-Hyperspec遥感影像数据，使用OIF波段选择法，研究区内薇甘菊的制图精度和用户精度分别为74.62%、66.52%；使用ABS波段选择法，研究区内薇甘菊的制图精度和用户精度分别为74.37%、67.43%；使用ASP+ABS波段选择法，研究区内薇甘菊的制图精度和用户精度分别达到95.98%、92.98%，分类精度最佳，相较OIF法中薇甘菊的制图精度和用户精度分别提高了21.35%、26.46%，相较ABS法中薇甘菊的制图精度和用户精度分别提高了17.15%、19.3%。可见，本文使用的子空间划分与自适应波段相结合的波段选择方法相较其他两种波段选择方法能更好地反映薇甘菊的光谱特征，可为薇甘菊监测提供有效的技术手段。 相似文献