共查询到20条相似文献，搜索用时 437 毫秒
1.
珠江口和琼东南盆地天然气水合物形成和稳定分布的地球化学边界条件及其分布区 总被引：22，自引：0，他引：22
通过对南海北部陆缘珠江口和琼东南盆地气田的天然气形成水合物的地球化学计算模拟及地质地球化学条件分析，对珠江口和琼东南盆地天然气形成水合物的地球化学边界条件及分布区进行了研究。认识到南海北部陆缘琼东南和珠江口盆地内的断裂构造是天然气向海底渗漏的通道，为天然气水合物在海底的形成提供了物源；盆地内巨厚的第四纪富有机质沉积也为天然气水合物形成提供了充足的细菌成因生物气源。在海底温度2－16℃范围内，琼东南盆地气田10种天然气和珠江口盆地气田18种天然气形成水合物的压力有比较大的范围，随温度增高，天然气水合物形成的压力增高；盆地间和各天然气样品之间形成水合物的压力均是不一致的。在南海海水平均盐度3．4％条件下，结合海底温度与水深变化资料，珠江口和琼东南盆地天然气水合物形成和稳定分布的海区是不同的，珠江口盆地小于230m水深的海区没有天然气水合物的形成，在230－760m水深的海区可能有天然气水合物的存在，天然气水合物的稳定分布区应该在大于860m水深的深水区；在琼东南盆地水深小于320m的海区不可能有天然气水合物的形成，在320－650m水深的海区可能有天然气水合物的存在，大于650m水深的海区是天然气水合物的稳定分布区。 相似文献
2.
冲绳海槽天然气水合物综合异常特征及成藏地质条件 总被引：6，自引：0，他引：6
从冲绳海槽的地质条件来看,该区有利于天然气水合物的稳定存在,从沉积厚度和沉积速率来看,位于冲绳海槽盆地西侧的陆架前缘坳陷最有利于有机质的保存和转化,可以为冲绳海槽水合物的形成提供充足气源。通过对冲绳海槽区域地质条件和地球化学异常的综合分析以及地震特殊处理资料的精细解释,认为冲绳海槽南段很可能更适宜水合物的形成和聚集,因而可能会有很好的远景。 相似文献
3.
南沙海域天然气水合物地震特征 总被引：5，自引：1，他引：5
南沙海域水深为200∽2500m，其中大于500m的水域约50万km^2，该区大部分区域发育沉积盆地，构造类型多样，具有形成天然气水合物的气源、温度及压力条件。根据地质及地球物理调查资料，分析了南沙海域天然气水合物成藏的地质条件及地球物理标志特征，认为南沙海域具备形成天然气水合物矿藏的条件，南沙海槽和南沙中部海域是天然气水合物形成的有利地区。 相似文献
4.
东海天然气水合物的区域地质特征及可能的远景区 总被引：7，自引：1，他引：7
从水深、沉积物厚度、沉积速率、有机质含量、地形和地貌来看，冲绳海槽盆地具有天然气水合物形成的区域地质条件，水合物出现的水深在500m以上，冲绳海槽南段水合物潜力最大。与智利三联点相类比，该区水合物可能主要分布在陆坡中部浅地层中。从冲绳海槽盆地的海底温度、海底热流和折射地震层速度资料的分析来看，该区具有水合物稳定存在的温压条件，其中南段和北段的稳定带厚度比中段更大一些，从已解释的穿越冲绳海槽盆地的地震剖面来看，有BSR迹象的剖面段约有300km，主要分布在中段的南部，从底水甲烷和卫星热红外异常分析来看，冲绳海槽盆地南段海域因存在经常性的卫星热红外增温异常和高值底水甲烷异常，因而水合物成藏的条件可能最好。 相似文献
5.
首先,根据地震反射剖面的似海底反射特征、深海钻探计划(DSDP)和大洋钻探计划(ODP)钻孔沉积物的高甲烷含量、高有机碳含量以及孔隙水盐度、氯离子浓度和硫酸根离子浓度异常等地球物理和地球化学证据推测,南极陆缘有7个潜在的天然气水合物分布区,它们分别为南设得兰陆缘、南极半岛的太平洋陆缘、罗斯海陆缘、威尔克斯地陆缘、普林斯湾陆缘、里瑟-拉森海陆缘和南奥克尼群岛东南陆缘等。其次,从气源条件、沉积条件、热流及温压条件和地质构造条件等对南极陆缘天然气水合物的成藏条件进行了分析,认为该陆缘具备天然气水合物形成和赋存的有利地质条件。最后,对南极陆缘天然气水合物的资源前景进行了探讨,认为其资源量非常可观。 相似文献
6.
南海北部陆坡区是中国最具潜力的天然气水合物聚集区。通过对研究区似海底反射层（BSR）、水深及热流值分布进行交会,得到了水深、热流双因素对天然气水合物形成的共同控制机理。研究认为,热流值中等（70～83mW／m^2）的地区最有利于天然气水合物的形成和聚集,热流值升高,天然气水合物形成的水深有总体增大的趋势。另外,天然气水合物的形成也需要良好的盖层条件。模拟了当上覆泥质沉积物盖层厚度不同时,天然气水合物形成所需的最低水深,并对不同泥质沉积物盖层厚度对天然气水合物稳定带底界面和厚度的影响做了研究和探讨。当泥质沉积物盖层的厚度越大时,天然气水合物形成的水深可以更浅;当泥质沉积物盖层厚度较小时,天然气水合物的形成则需要更大的水深。另外,当水深越大时,天然气水合物稳定带的底界面（BGHSZ）越深,天然气水合物稳定带的厚度越大。 相似文献
7.
南海北部神狐海域天然气水合物形成及分布的地质因素 总被引：6，自引：0，他引：6
从天然气水合物发育的地质构造条件、沉积条件、气源条件、温压条件等分析了神狐海域影响水合物形成及分布的地质因素.指出神狐海域处在洋陆壳的过渡带上,断裂-褶皱构造及流体底辟构造发育,对水合物的形成具有重要的控制作用.受等深流和海底滑塌双重作用,研究区沉积异常体发育,沉积厚度大、沉积速率高,有利于水合物发育.通过对神狐海域附近钻探结果及区内地质调查站位资料的分析表明:目标区具有含巨量的生物气和热成因气资源潜力,具备形成天然气水合物的气源条件,气源为文昌-恩平组烃源岩.此外,受热流值北高南低的分布格局的影响,神狐海域BSR埋深也表现为北部浅南部深,且BSR分布区整体处在天然气水合物稳定存在的温压范围内,满足水合物形成及保存所需的温压条件.神狐海域的地质构造条件、沉积特征、气源条件、温压条件等都非常有利于天然气水合物发育. 相似文献
8.
南设得兰陆缘属于典型的活动型大陆边缘,沟-增生楔-弧前盆地序列发育,具备天然气水合物发育的有利地质构造背景。该区已有的调查资料显示出天然气水合物存在的显著标志——BSR和极性反转特征(或者称为基底反射波,BGR)。研究结果表明,南设得兰陆缘具备形成水合物的充足的气源、适宜的稳定域条件、有利于天然气水合物形成与聚集的沉积体系和特殊地质构造环境,推断南设得兰陆缘以构造型水合物成矿地质模式为主,并以增生楔内甲烷随流体向上迁移形成水合物的模式最为重要。 相似文献
9.
《海洋地质与第四纪地质》2017,(5)
孔隙水地球化学异常是天然气水合物勘探的重要工具之一,南海北部陆坡地区拥有良好的天然气水合物成藏潜力,孔隙水地球化学异常在南海的天然气水合物勘探中发挥了重要作用。其中与水合物直接相关的氯离子含量异常被用于识别神狐及东沙海域钻探区的水合物层和计算水合物饱和度。除直接指标外,浅表层沉积物中的硫酸盐含量及其他与早期成岩作用有关的地球化学异常作为间接指标可用于水合物的找矿预测,研究者们通过对硫酸盐还原过程的判别、硫酸盐甲烷接触界面的计算等方面对南海北部陆坡不同海域的沉积物甲烷通量进行了评估,预测出水合物可能的成藏区域。其他如碘含量、氧化还原敏感元素、氯同位素、地球化学模型等新的地球化学指标和计算机手段也被应用于南海北部陆坡区水合物成藏研究并取得了不错的成效。 相似文献
10.
为了探讨琼东南盆地华光凹陷海底天然气水合物稳定带的分布规律，定量研究了静水压力、底水温度、地温梯度和气源组分对水合物稳定带的影响程度。在此基础上，分析了华光凹陷现今甲烷水合物稳定带的厚度分布。最后，综合各因素的历史演化过程，初步探讨了华光凹陷1.05 Ma BP以来天然气水合物稳定带的演化。结果表明:(1)气源组分和海底温度的变化对研究区内水合物稳定带的影响较大；水合物稳定带厚度与海底温度呈良好的线性负相关性。(2)水深超过600 m的海域具备形成天然气水合物的温压条件；超过600 m水深的海域水合物稳定带厚度大部分超过 100 m，其中西北部稳定带的最大厚度超过300 m，是有利的水合物勘探区。(3)华光凹陷1.05 Ma BP以来天然气水合物稳定带厚度经历了快速增厚–窄幅变化–快速减薄和恢复的过程。麻坑群与水合物稳定变化敏感区在空间上具有较好的叠合关系。结合前人的研究成果，推测其形成与天然气水合物的分解释放有关。 相似文献
11.
Chandralata Raghukumar G. Sheelu P. A. Loka Bharathi Shanta Nair C. Mohandass 《Marine Georesources & Geotechnology》2001,19(1):1-16
In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance. 相似文献
12.
Arne Schnack-Friedrichsen Angela M. Davis Jim D. Bennell Dei G. Huws 《Marine Georesources & Geotechnology》2001,19(4):221-243
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths. 相似文献
13.
Derek V. Ellis 《Marine Georesources & Geotechnology》2001,19(1):51-63
This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested. 相似文献
14.
G. Parthiban 《Marine Georesources & Geotechnology》2000,18(3):223-235
Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement. 相似文献
15.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。 相似文献
16.
Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification
An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm. 相似文献
17.
Shigehisa Nakamura 《Marine Geodesy》2000,23(1):55-61
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone. 相似文献
18.
The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments. 相似文献
19.
The effect of different fixation and storage protocols on the flow cytometric (FCM) simultaneous analysis of bacterioplankton and phytoplankton in coastal seawater samples (Mediterranean coastal lagoons) was investigated. FCM measurements (cell number, fluorescence and scatter characteristics) were obtained through DAPI staining. Three fixatives [glutaraldehyde (GA), formaldehyde (FA) and paraformaldehyde (PFA)] and two storage (3 months duration) methods (5 °C and −196 °C) were tested. Two dominant populations were detected in studied samples: bacteria and eukaryotic picophytoplankton. Adding fixatives (2% final concentration) appears necessary to obtain FCM exhaustive counts of all the bacteria and phytoplanktonic cells. This was related to the permeation effect of fixatives which allowed a better DAPI staining of the cells. Maximum fluorescence, i.e. optimal staining of the cells was obtained with FA or PFA, and significant lower fluorescences with GA. Fixed samples stored at 5 °C induced rapid cell loss. Only storage in liquid nitrogen of samples fixed with FA or PFA, allows mid-term (≥4 months) preservation of bacteria or picophytoplankton cell numbers, and limited evolution of DAPI-induced fluorescence and scatter characteristics. 相似文献
20.