首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Critical aspects of the crystallization dynamics of H2O-saturated melts of a typical granitic composition as well as granitic melts enriched in lithium (8800 ppm) were investigated in real-time experiments using the hydrothermal diamond anvil cell at 480–700 °C and 220–960 MPa. Complete crystallization of the charges was achieved within 5–118 h with average crystal growth rates ranging from 3 to 41 cm/year for quartz and from 18 to 58 cm/year for alkali feldspars, demonstrating that crystals formed from a silicate melt in the presence of a coexisting aqueous phase crystallize rapidly. The combination of substantial nucleation delays, low nucleation densities, and rapid growth rates for quartz and alkali feldspars led to the formation of euhedral megacrysts of these minerals in the vicinity of clusters comprised of much smaller muscovite or α-spodumene crystals. Subsolidus replacement processes initiated during crystal–fluid interactions after the silicate melt was consumed were directly observed in the experiments. The experimental results underscore the important role of water as a medium for the transport of essential elements such as Si, Al, Na, and K from the silicate melt to the newly formed crystals, and provide important insights into the crystallization of miarolitic pegmatites.  相似文献   

2.
The study of re-homogenized melt inclusions in the same growth planes of quartz of pegmatites genetically linked to the Variscan granite of the Ehrenfriedersdorf complex, Erzgebirge, Germany, by ion microprobe analyses has determined high concentrations of Be, up to 10,000 ppm, in one type of melt inclusion, as well as moderate concentrations in the 100 ppm range in a second type of melt inclusion. Generally, the high Be concentrations are associated with the H2O- and other volatile-rich type-B melt inclusions, and the lower Be concentration levels are connected to H2O-poor type-A melt inclusions. Both inclusion types, representing conjugate melt pairs, are formed by a liquid–liquid immiscibility separation process. This extremely strong and very systematic scattering in Be provides insights into the origin of Be concentration and transport mechanisms in pegmatite-forming melts. In this contribution, we present more than 250 new analytical data and show with ion microprobe and fs-LA-ICPMS studies on quenched glasses, as well as with confocal Raman spectroscopy of daughter minerals in unheated melt inclusions, that the concentrations of Be may achieve such extreme levels during melt–melt immiscibility of H2O-, B-, F-, P-, ± Li-enriched pegmatite-forming magmas. Starting from host granite with about 10 ppm Be, melt inclusions with 10,000 ppm Be correspond to enrichment by a factor of over 1,000. This strong enrichment of Be is the result of processes of fractional crystallization and further enrichment in melt patches of pegmatite bodies due to melt–melt immiscibility at fluid saturation. We also draw additional conclusions regarding the speciation of Be in pegmatite-forming melt systems from investigation of the Be-bearing daughter mineral phases in the most H2O-rich melt inclusions. In the case of evolved volatile and H2O-rich pegmatite systems, B, P, and carbonates are important for the enrichment and formation of stable Be complexes.  相似文献   

3.
Many studies have documented hydrous fractionation of calc-alkaline basalts producing tonalitic, granodioritic, and granitic melts, but the origin of more alkaline arc sequences dominated by high-K monzonitic suites has not been thoroughly investigated. This study presents results from a combined field, petrologic, and whole-rock geochemical study of a paleo-arc alkaline fractionation sequence from the Dariv Range of the Mongolian Altaids. The Dariv Igneous Complex of Western Mongolia is composed of a complete, moderately hydrous, alkaline fractionation sequence ranging from phlogopite-bearing ultramafic and mafic cumulates to quartz–monzonites to late-stage felsic (63–75 wt% SiO2) dikes. A volumetrically subordinate more hydrous, amphibole-dominated fractionation sequence is also present and comprises amphibole (±phlogopite) clinopyroxenites, gabbros, and diorites. We present 168 whole-rock analyses for the biotite- and amphibole-dominated series. First, we constrain the liquid line of descent (LLD) of a primitive, alkaline arc melt characterized by biotite as the dominant hydrous phase through a fractionation model that incorporates the stepwise subtraction of cumulates of a fixed composition. The modeled LLD reproduces the geochemical trends observed in the “liquid-like” intrusives of the biotite series (quartz–monzonites and felsic dikes) and follows the water-undersaturated albite–orthoclase cotectic (at 0.2–0.5 GPa). Second, as distinct biotite- and amphibole-dominated fractionation series are observed, we investigate the controls on high-temperature biotite versus amphibole crystallization from hydrous arc melts. Analysis of a compilation of hydrous experimental starting materials and high-Mg basalts saturated in biotite and/or amphibole suggests that the degree of K enrichment controls whether biotite will crystallize as an early high-T phase, whereas the degree of water saturation is the dominant control of amphibole crystallization. Therefore, if a melt has the appropriate major-element composition for early biotite and amphibole crystallization, as is true of the high-Mg basalts from the Dariv Igneous Complex, the relative proximity of these two phases to the liquidus depends on the H2O concentration in the melt. Third, we compare the modeled high-K LLD and whole-rock geochemistry of the Dariv Igneous Complex to the more common calc-alkaline trend. Biotite and K-feldspar fractionation in the alkaline arc series results in the moderation of K2O/Na2O values and LILE concentrations with increasing SiO2 as compared to the more common calc-alkaline series characterized by amphibole and plagioclase crystallization and strong increases in K2O/Na2O values. Lastly, we suggest that common calc-alkaline parental melts involve addition of a moderate pressure, sodic, fluid-dominated slab component while more alkaline primitive melts characterized by early biotite saturation involve the addition of a high-pressure potassic sediment melt.  相似文献   

4.
Vapor-undersaturated fractional crystallization experiments with Macusani glass (macusanite), a peraluminous rhyolite obsidian, at 200 MPa yield mineralogical fabrics and zonation, and melt fractionation trends that closely resemble those found in zoned granitic pegmatites and other granitoids of comparable composition (typically peraluminous, Li-Be-Ta-rich deposits). The zonation from the edge of charges inward is characterized by: (1) fine-grained sodic feldspar-quartz border zones; (2) a fringe of very coarse-grained graphic quartz-feldspar intergrowths that flair radially toward melt and terminate with nearly monophase K-feldspar; (3) cores of very coarse-grained, nearly monominerallic quartz or virgilite (LiAlSi5O12)±mica; and (4) late-stage, fine-grained albite+mica intergrowths that are deposited from alkaline, Na-rich interstitial melt at vapor saturation. Similar experimental products have been observed in compositionally simpler, less evolved systems. Liquid lines of descent from initially H2O-undersaturated runs are marked by a decrease in SiO2, and increases in Na/K, B, P, F, H2O, and a variety of trace lithophile cations. These trends are believed to be governed by three factors: (1) disequilibrium growth of feldspars (±quartz) via metastable supersaturation; (2) fractionation of melt toward SiO2-depleted, Na-rich compositions due to increases in B, P, and F; and (3) changes in nucleation and growth rates, mostly as a function of the H2O content of melt (X w m ). In contrast, experiments that are cooled below the liquidus from the field of melt+aqueous vapor (London et al. 1988) fail to replicate pegmatitic characteristics in most respects. On the basis of these and other experiments, we suggest that the formation of pegmatite fabrics stems primarily from fractional crystallization in volatile-rich melts, and that enrichments in normally trace lithophile elements result from melt differentiation trends toward increasingly alkaline, silica-depleted compositions. Although vapor saturation at near-solidus and subsolidus conditions may promote extensive recrystallization, an aqueous vapor phase does not appear to be necessary for the generation of most of the salient characteristics of pegmatites.  相似文献   

5.
The solubility of fluorapatite in 17 silica-rich melts in the system Na2O-K2O-Al2O3-SiO2 (with and without CaO or CaF2) was determined at 1 kbar water pressure and 750 900°C. Apatite saturation occurs at levels of dissolved P2O5 ranging between 0.04 (± 0.02) and 0.28 (± 0.13) wt%. with only 4 values outside the 0.09–0.20 wt% range.The results demonstrate not only that apatite is a common liquidus phase in felsic melts, but also that, under most circumstances, it remains in the residue during episodes of partial fusion of the crust. Given a solubility limit of 0.14 wt% dissolved P2O5 (the mean of the experimental values) a source containing as little as 0.05% P2O5 must be 35% melted before apatite is lost from the residue and no longer buffers the melt P2O5 concentration at the saturation value. Higher abundances of P2O5 in the source postpone the loss of residual apatite to still higher degrees of melting, and if the source P2O5 content exceeds 0.14 wt%, apatite must be residual for all degrees of melting, increasing in abundance as melting proceeds.The generally secondary influence of apatite on the rare earth element (REE) patterns of melt and residue is most apparent when garnet and/or amphibole is minor or lacking in the residue. Fractional crystallization of intermediate (e.g. andesitic) magmas toward felsic compositions invariably results in saturation in apatite and some consequent depletion of REE in the melt.  相似文献   

6.
富锂氟含稀有矿化花岗质岩石的对比和成因思考   总被引：31，自引：5，他引：31  
Li-F花岗质岩石以超酸性、过铝、富含H2O、F、B、P等挥发性组分和富含Li、Rb、Cs、Be、Ta、Nb、Sn、W等亲石稀有金属元素为主要特征，以黄玉－锂云母－钠长石花岗岩为典型代表。从该类岩石地质产状的多样性和可对比性、空间分布的规律性、矿物岩石的结构构造、硅酸盐－熔体包裹体特征以及实验岩石学的研究成果等方面，综合论证该类岩石主要是从经过分异演化而形成的残余熔浆中直接结晶而在的；充分的分离结晶作用，是产生这种残余熔浆的主要机制；岩体的空间分带特征和各带之间的渐变过渡关系，为分离结晶作用的途径和演化方向提供了重要信息；熔体中挥发性组分的大量存在，是分离结晶作用能充分进行的关键因素；亲石稀有金属元素在流／熔配分中倾向于进入熔体相，是残余熔体中逐步富集这些稀有金属元素的主要原因；岩浆－热液过渡阶段出溶的流体相与已晶出的共存固相之间的相互作用，造成了广泛的交代蚀变现象；残余熔浆在不同地质和物理化学环境中的侵位、结晶和演化，造成了Li-F花岗质岩石在产状、结构构造和矿物组合等方面的多样性。  相似文献   

7.
Detailed analyses of melt and fluid inclusions combined with an electron-microprobe survey of boron-bearing minerals reveal the evolution of boron in a highly evolved peraluminous granite-pegmatite complex and the associated high- and medium-temperature ore-forming hydrothermal fluids (Ehrenfriedersdorf, Erzgebirge, Germany). Melt inclusions in granite represent embryonic pegmatite-forming melts containing about 10 wt% H2O and 1.8 wt% B2O3. These melts are also enriched in F, P, and other incompatible elements such as Be, Sn, Rb, and Cs. Ongoing differentiation and volatile enrichment drove the system into a solvus, where two pegmatite-forming melts coexisted. The critical point is at about 712 °C, 100 MPa, 20 wt% H2O and 4.1 wt% B2O3. Cooling and concomitant fractional crystallisation from 700 to 500 °C induced development of two conjugate melts, an H2O-poor (A-melt) and an H2O-rich melt (B-melt) along the opening solvus. Boron is a major element in both melts and is preferentially partitioned into the H2O-rich melt. Temperature-dependent distribution coefficients DboronB - melt/A - melt D_{{\rm{boron}}}^{{\rm{B - melt/A - melt}}} are 1.3 at 650 °C, 1.5 at 600 °C, and 1.8 at 500 °C. In both melts, boron concentrations decreased during cooling because of exsolution of a boron-rich hypersaline brine throughout the pegmatitic stage. Boromuscovite containing up to 8.5 wt% was another sink for boron at this stage. The end of the melt-dominated pegmatitic stage was attained at a solidus temperature of around 490 °C. Fluid inclusions of the hydrothermal stage reveal trapping temperatures of 480 to 370 °C, along with varying densities and highly variable B2O3 contents ranging from 0.20 to 2.94 wt%. A boiling system evolved, indicating a complex interplay between closed- and open-system behaviour. Pressure switched from lithostatic to hydrostatic and back, generating hydrothermal convection cells where meteoric waters were introduced and mixed with magmatic fluids. Boron-rich solutions originated from magmatic fluids, whereas boron-depleted fluids were mainly of meteoric origin. This highlights the potential of boron for discriminating fluids of different origin. Tin is continuously enriched during the evolution because tin and boron are cross-linked by formation of boron-, fluorine- and tin-fluorine-bearing complexes and is finally deposited within quartz-cassiterite veins during the transition from closed- to open-system behaviour. Boron does not only trace the complex evolution of the Ehrenfriedersdorf complex but exerts, together with H2O, F and P, an important control on the physical and chemical properties of pegmatite-forming melts, and particularly on the formation of a two-melt solvus at low pressure. We discuss this with respect to experimental results on H2O solubility and the critical behaviour of the haplogranite-water system which contained variable concentrations of volatiles.  相似文献   

8.
The behaviour of niobium and tantalum in magmatic processes has been investigated by conducting MnNb2O6 and MnTa2O6 solubility experiments in nominally dry to water-saturated peralkaline (aluminium saturation index, A.S.I. 0.64) to peraluminous (A.S.I. 1.22) granitic melts at 800 to 1035 °C and 800 to 5000 bars. The attainment of equilibrium is demonstrated by the concurrence of the solubility products from dissolution, crystallization, Mn-doped and Nb- or Ta-doped experiments at the same pressure and temperature. The solubility products of MnNb2O6 (Ksp Nb) and MnTa2O6 (Ksp Ta) at 800 °C and 2 kbar both increase dramatically with alkali contents in water-saturated peralkaline melts. They range from 1.2 × 10−4 and 2.6 × 10−4 mol2/kg2, respectively, in subaluminous melt (A.S.I. 1.02) to 202 × 10−4 and 255 × 10−4 mol2/kg2, respectively, in peralkaline melt (A.S.I. 0.64). This increase from the subaluminous composition can be explained by five non-bridging oxygens being required for each excess atom of Nb5+ or Ta5+ that is dissolved into the melt. The Ksp Nb and Ksp Ta also increase weakly with Al content in peraluminous melts, ranging up to 1.7 × 10−4 and 4.6 × 10−4 mol2/kg2, respectively, in the A.S.I. 1.22 composition. Columbite-tantalite solubilities in subaluminous and peraluminous melts (A.S.I. 1.02 and 1.22) are strongly temperature dependent, increasing by a factor of 10 to 20 from 800 to 1035 °C. By contrast columbite-tantalite solubility in the peralkaline composition (A.S.I. 0.64) is only weakly temperature dependent, increasing by a factor of less than 3 over the same temperature range. Similarly, Ksp Nb and Ksp Ta increase by more than two orders of magnitude with the first 3 wt% H2O added to the A.S.I. 1.02 and 1.22 compositions, whereas there is no detectable change in solubility for the A.S.I. 0.64 composition over the same range of water contents. Solubilities are only slightly dependent on pressure over the range 800 to 5000 bars. The data for water-saturated sub- and peraluminous granites have been extrapolated to 600 °C, conditions at which pegmatites and highly evolved granites may crystallize. Using a melt concentration of 0.05 wt% MnO, 70 to 100 ppm Nb or 500 to 1400 ppm Ta are required for manganocolumbite and manganotantalite saturation, respectively. The solubility data are also used to model the fractionation of Nb and Ta between rutile and silicate melts. Predicted rutile/melt partition coefficients increase by about two orders of magnitude from peralkaline to peraluminous granitic compositions. It is demonstrated that the γNb2O5/γTa2O5 activity coefficient ratio in the melt phase depends on melt composition. This ratio is estimated to decrease by a factor of 4 to 5 from andesitic to peraluminous granitic melt compositions. Accordingly, all the relevant accessory phases in subaluminous to peraluminous granites are predicted to incorporate Nb preferentially over Ta. This explains the enrichment of Ta over Nb observed in highly fractionated granitic rocks, and in the continental crust in general. Received: 9 August 1996 / Accepted: 26 February 1997  相似文献   

9.
Arenal volcano is nearly unique among arc volcanoes with its 42 year long (1968–2010) continuous, small-scale activity erupting compositionally monotonous basaltic andesites that also dominate the entire, ~7000 year long, eruptive history. Only mineral zoning records reveal that basaltic andesites are the result of complex, open-system processes deriving minerals from a variety of crystallization environments and including the episodic injections of basalt. The condition of the mafic input as well as the generation of crystal-rich basaltic andesites of the recent, 1968–2010, and earlier eruptions were addressed by an experimental study at 200 MPa, 900–1,050 °C, oxidizing and fluid-saturated conditions with various fluid compositions [H2O/(H2O + CO2) = 0.3–1]. Phase equilibria were determined using a phenocryst-poor (~3 vol%) Arenal-like basalt (50.5?wt% SiO2) from a nearby scoria cone containing olivine (Fo92), plagioclase (An86), clinopyroxene (Mg# = 82) and magnetite (Xulvö = 0.13). Experimental melts generally reproduce observed compositional trends among Arenal samples. Small differences between experimental melts and natural rocks can be explained by open-system processes. At low pressure (200 MPa), the mineral assemblage as well as the mineral compositions of the natural basalt were reproduced at 1,000 °C and high water activity. The residual melt at these conditions is basaltic andesitic (55 wt% SiO2) with 5 wt% H2O. The evolution to more evolved magmas observed at Arenal occurred under fluid-saturated conditions but variable fluid compositions. At 1,000 °C and 200 MPa, a decrease of water content by approximately 1 wt% induces significant changes of the mineral assemblage from olivine + clinopyroxene + plagioclase (5 wt% H2O in the melt) to clinopyroxene + plagioclase + orthopyroxene (4 wt% H2O in the melt). Both assemblages are observed in crystal-rich basalt (15 vol%) and basaltic andesites. Experimental data indicate that the lack of orthopyroxene and the presence of amphibole, also observed in basaltic andesitic tephra units, is due to crystallization at nearly water-saturated conditions and temperatures lower than 950 °C. The enigmatic two compositional groups previously known as low- and high-Al2O3 samples at Arenal volcano may be explained by low- and high-pressure crystallization, respectively. Using high-Al as signal of deeper crystallization, first magmas of the 1968–2010 eruption evolved deep in the crust and ascent was relatively fast leaving little time for significant compositional overprint by shallower level crystallization.  相似文献   

10.
Experiments on the partitioning of Cu between different granitic silicate melts and the respective coexisting aqueous fluids have been performed under conditions of 850 °C, 100 MPa and oxygen fugacity（f O2） buffered at approaching Ni–Ni O（NNO）. Partition coefficients of Cu（DCu= cfluid/cmelt） were varied with different alumina/alkali mole ratios [Al2O3/（Na2O·K2O）, abbreviated as Al/Alk], Na/K mole ratios, and Si O2 mole contents. The DCu increased from 1.28 ± 0.01 to 22.18 ± 0.22 with the increase of Al/Alk mole ratios（ranging from 0.64 to 1.20）and Na/K mole ratios（ranging from 0.58 to 2.56）. The experimental results also showed that DCuwas positively correlated with the HCl concentration of the starting fluid.The DCuwas independent of the Si O2 mole content in the range of Si O2 content considered. No DCuvalue was less than 1 in our experiments at 850 °C and 100 MPa, indicating that Cu preferred to enter the fluid phase rather than the coexisting melt phase under most conditions in the melt-fluid system, and thus a significant amount of Cu could be transported in the fluid phase in the magmatichydrothermal environment. The results indicated that Cu favored partitioning into the aqueous fluid rather than themelt phase if there was a high Na/K ratio, Na-rich, peraluminous granitic melt coexisting with the high Cl-fluid.  相似文献   

11.
We conducted melting experiments on a low MgO (3.29 wt.%) basaltic andesite (54.63 wt.% SiO2) from Westdahl volcano, Alaska, at XH2O = 0.7–1 and fO2 ~ Ni–NiO, at pressures = 0.1–180 MPa and temperatures = 900–1,200 °C. We examine the evolution of the melt along a liquid line of descent during equilibrium crystallization at high H2O and fO2 conditions, starting from a high FeOt/MgO, low MgO basaltic andesite. Ti-magnetite formed on the liquidus regardless of XH2O, followed by clinopyroxene, plagioclase, amphibole, and orthopyroxene. We observe slight but significant differences in the phase stability curves between the XH2O = 1 and 0.7 experiments. Early crystallization of Ti-magnetite and suppression of plagioclase at higher pressures and temperatures resulted in strongly decreasing melt FeOt/MgO with increasing SiO2, consistent with a “calc-alkaline” compositional trend, in agreement with prior phase equilibria studies on basalt at similar H2O and fO2. Our study helps quantify the impact of small amounts of CO2 and high fO2 on the evolution of melts formed during crystallization of a low MgO basaltic andesite magma stored at mid- to shallow crustal conditions. Like the prior studies, we conclude that H2O strongly influences melt evolution trends, through stabilization of Ti-magnetite on the liquidus and suppression of plagioclase at high P–T conditions.  相似文献   

12.
David London   《Lithos》2005,80(1-4):281-303
Although many explanations have been proposed for the internal zonation of granitic pegmatites, the most widely accepted model is attributed to R.H. Jahns. Jahns and Burnham [Jahns, R.H., Burnham, C.W., 1969. Experimental studies of pegmatite genesis: I. A model for the derivation and crystallization of granitic pegmatites. Econ. Geol. 64, 843–864] said that pegmatites owe their distinctive textural and zonal characteristics to the buoyant separation of aqueous vapor from silicate melt, giving rise to K-rich pegmatitic upper portions and Na-rich aplitic lower zones of individual pegmatites. Jahns and Tuttle [Janhs, R.H., Tuttle, O.F., 1963. Layered pegmatite–aplite intrusives. Spec. Pap.-Miner. Soc. Am. 1, 78–92] cited experiments as confirmation of this effect, but several experimental studies contradict the partitioning behavior that was the premise of Jahns' model. More recent work indicates that pegmatite-forming melts should cool quickly, or in any case, more quickly than crystallization can keep pace with. The distinctive textural and zonal features of pegmatites have been replicated in experiments that employ constitutional zone refining of melts that are substantially undercooled before crystallization commences. Melt boundary layers formed by this process would represent the last silicate liquids to crystallize in pegmatites, which explains the tendency in pegmatites for abrupt transitions from simple to evolved mineral and rock compositions. The sources of pegmatite-forming melts and of the causes of regional zonation within pegmatite groups represent important directions for future research.  相似文献   

13.
In this paper, we show that the crystallization of miarolitic pegmatites at K?nigshain started at about 700°C, in melts containing up to 30 mass% water. Such high water concentration at low pressures (1–3 kbar) is only possible if the melts are peralkaline. Such peralkaline melts are highly corrosive, and reacted with the wall rock—here the granite host—forming the graphic granite zone, in part via a magmatic–metasomatic reaction. With cooling, the water concentration in some melt fractions increased up to 50 mass% H2O. The melt-dominated system ends below 600°C and passes into a fluid-dominated system, the beginning of which is characterized by strong pressure fluctuations, caused by the change of OH and CO3 2− in the melt, to molecular water and CO2. We note two generations of smoky quartz, one crystallized above the β–α-transition of quartz (≈573°C), and one below, both of which contain melt inclusions. This indicates that some melt fraction remains during at least the higher-temperature portion of the growth of minerals into the miarolitic cavity, contradicting the view that minerals growing into a pegmatite chamber only do so from aqueous fluids. We show that the K?nigshain miarolitic pegmatites are part of the broad spectrum of pegmatite types, and the processes active at K?nigshain are representative of processes found in most granitic pegmatites, and are thus instructive in the understanding of pegmatite formation in general, and constraining the composition and characteristics of pegmatite-forming melts. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.  相似文献   

14.
Experimental data indicate that high F concentrations in leucocratic aluminosilicate melts (of granite and nepheline syenite composition) bring about the crystallization of F-rich minerals (topaz, villiaumite, and cryolite) on the liquidus. The crystallization of the minerals is controlled by the silicity, agpaitic coefficient, and proportions of alkalis in the system SiO2-Al2O3-Na2O-K2O-F-H2O. Our earlier experimental data on this system are compared with petrographic and petrochemical data on granites and nepheline syenites containing accessory topaz, cryolite, and villiaumite. The composition of topaz- and cryolite-bearing rocks is proved to correspond to the experimentally established equilibrium fields of F-rich aluminosilicate melt with these minerals. It is proved that the high-F minerals can crystallize from melt. The partial substitution of K and Na for Li modifies phase relations in the system, first of all, significantly expands the equilibrium field of aluminosilicate melt and alkaline aluminofluoride melts. The two melts are proved to be immiscible within broad compositional ranges in the SiO2-Al2O3-Na2O-Li2O-F-H2O system at 800–650°C and 1 kbar. Experimental data indicate that fluoride brine can coexist with aluminosilicate melts in nature. This finds support data on melt inclusions in granites and alkaline rocks whose contents of major components, water and fluorine are close to those in the experimental glasses. Our data lend support to the hypothesis that large cryolite bodies at the Ivigtut, Pitinga, Ulog-Tanzek, and other deposits were formed by fluoride salt melts that separated from F-rich aluminosilicate magmas late in the course of their differentiation. It is experimentally established that fluoride salt melts are able to concentrate valuable trace elements, such as Li, W, Nb, Hf, Sc, U, Th, and REE, which suggests that such melts can play an important role in the origin of rare-metal deposits genetically related to rocks that crystallize from magmas rich in F.  相似文献   

15.
Amphibole is widely employed to calculate crystallization temperature and pressure, although its potential as a geobarometer has always been debated. Recently, Ridolfi et al. (Contrib Mineral Petrol 160:45–66, 2010) and Ridolfi and Renzulli (Contrib Mineral Petrol 163:877–895, 2012) have presented calibrations for calculating temperature, pressure, fO2, melt H2O, and melt major and minor oxide composition from amphibole with a large compositional range. Using their calibrations, we have (i) calculated crystallization conditions for amphibole from eleven published experimental studies to examine the problems and the potential of the new calibrations; and (ii) calculated crystallization conditions for amphibole from basaltic–andesitic pyroclasts erupted during the paroxysmal 2010 eruption of Mount Merapi in Java, Indonesia, to infer pre-eruptive conditions. Our comparison of experimental and calculated values shows that calculated crystallization temperatures are reasonable estimates. Calculated fO2 and melt SiO2 content yields potentially useful estimates at moderately reduced to moderately oxidized conditions and intermediate to felsic melt compositions. However, calculated crystallization pressure and melt H2O content are untenable estimates that largely reflect compositional variation in the crystallizing magmas and crystallization temperature and not the calculated parameters. Amphibole from Merapi’s pyroclasts yields calculated conditions of ~200–800 MPa, ~900–1,050 °C, ~NNO + 0.3–NNO + 1.1, ~3.7–7.2 wt% melt H2O, and ~58–71 wt% melt SiO2. We interpret the variations in calculated temperature, fO2, and melt SiO2 content as reasonable estimates, but conclude that the large calculated pressure variation for amphibole from Merapi and many other arc volcanoes is evidence for thorough mixing of mafic to felsic magmas and not necessarily evidence for crystallization over a large depth range. In contrast, bimodal pressure estimates obtained for other arc magmas reflect amphibole crystallization from mafic and more evolved magmas, respectively, and should not necessarily be taken as evidence for crystallization in two reservoirs at variable depth.  相似文献   

16.
《International Geology Review》2012,54(13):1715-1734
This study examines the geochemistry of major and trace elements of abyssal peridotites from the Southwest Indian Ridge (SWIR) (53° E amagmatic segment), to determine the influence of mafic melts on mantle peridotites during melt extraction. The results show a great geochemical variability in the ~90 km-long ridge segment, with a degree of mantle melting ranging from 4% to 24%. An ancient melting event may explain the presence of highly depleted peridotites at the ultraslow-spreading ridge. The 53° E segment peridotites show enrichment of light rare earth elements (LREEs) (average LaN/SmN = 1.87) and significant positive anomaly of U and Pb normalized to primitive mantle (PM). The positive correlations between LREEs (La, Ce, Pr, Nd) and high field strength elements (HFSEs; e.g. Nb and Zr) suggest that the enrichment of LREEs is caused by melt refertilization, which is also supported by prevalent magmatic microstructures in the peridotites. The melt refertilization model shows that the addition of 0.02–2.7% basaltic melts to peridotites can be responsible for the LREE enrichment. We suggest that the positive anomaly of U is probably attributed to fluid alteration whereas the enrichment of Pb is probably attributed to both melt refertilization and fluid alteration. Melt refertilization in the 53° E segment peridotites may be a result of melt–rock reaction and crystallization of melts trapped in peridotites. These processes may be enhanced by increased melt permeability in the mantle owing to the refractory peridotites produced by ancient melting and the decreasing efficiency of melt extraction in the cold and thick lithosphere at the 53° E ridge segment. The presence of melt refertilization implies that melt extraction is incomplete in the ridge mantle, which may be one of the reasons for the extremely thin and irregular variation of the crustal thickness at ultraslow-spreading ridges.  相似文献   

17.
Most igneous charnockites are interpreted to have crystallized at hot and dry conditions, i.e. at >800?°C and <3 wt.% H2O and with an important CO2 component in the system. These charnockites are metaluminous to weakly peraluminous and their formation involves a significant mantle-derived component. This study, in contrast, investigates the crystallization conditions of strongly peraluminous, metasediment-sourced charnockites from the Qinzhou Bay Granitic Complex, South China. To constrain the temperature-melt H2O crystallization paths for the studied peraluminous charnockites, petrographic characterization was combined with fluid inclusion compositional data, mineral thermometry, and thermodynamic modelling. The uncertainties of the thermodynamic modelling in reconstructing the crystallization conditions of the granitic magmas have been evaluated by comparison between modelled and experimental phase relations for a moderately evolved, peraluminous granite (~70 wt.% SiO2). The comparison suggests that the modelling reproduces the experimentally derived phase saturation boundaries with uncertainties of 20–60?°C and 0.5–1 wt.% H2O for systems with ≤1–2 wt.% initial melt H2O at ~0.2 GPa. For the investigated natural systems, the thermometric estimates and modelling indicate that orthopyroxene crystallized at relatively low temperature (750–790?±?30?°C) and moderately high to high melt H2O content (3.5–5.6?±?0.5 wt.%). The charnockites finally solidified at relatively “cold” and “wet” conditions. This suggests that thermodynamic modelling affords a possible approach to constrain charnockite crystallization as tested here for peraluminous, moderately low pressure (≤0.3 GPa), and overall H2O-poor systems (≤1–2 wt.% H2O total), but yields results with increasing uncertainty for high-pressure or H2O-rich granitic systems.  相似文献   

18.
Based on the theory of thermal conductivity, in this paper we derived a formula to estimate the prolongation period （AtL） of cooling-crystallization process of a granitic melt caused by latent heat of crystallization as follows：△tL=QL×△tcol/（TM-TC）×CP where TM is initial temperature of the granite melt, Tc crystallization temperature of the granite melt, Cp specific heat, △tcol cooling period of a granite melt from its initial temperature （TM） to its crystallization temperature （Tc）, QL latent heat of the granite melt.
The cooling period of the melt for the Fanshan granodiorite from its initial temperature （900℃） to crystallization temperature （600℃） could be estimated -210,000 years if latent heat was not considered. Calculation for the Fanshan melt using the above formula yields a AtL value of -190,000 years, which implies that the actual cooling period within the temperature range of 900°-600℃ should be 400,000 years. This demonstrates that the latent heat produced from crystallization of the granitic melt is a key factor influencing the cooling-crystallization process of a granitic melt, prolongating the period of crystallization and resulting in the large emplacement-crystallization time difference （ECTD） in granite batholith.  相似文献   

19.
Dehydration melting of tonalites. Part II. Composition of melts and solids   总被引：6，自引：0，他引：6  
 Dehydration melting of tonalitic compositions (phlogopite or biotite-plagioclase-quartz assemblages) is investigated within a temperature range of 700–1000°C and pressure range of 2–15 kbar. The solid reaction products in the case of the phlogopite-plagioclase(An45)-quartz starting material are enstatite, clinopyroxene and potassium feldspar, with amphiboles occurring occasionally. At 12 kbar, zoisite is observed below 800°C, and garnet at 900°C. The reaction products of dehydration melting of the biotite (Ann50)-plagioclase (An45)-quartz assemblage are melt, orthopyroxene, clinopyroxene, amphibole and potassium feldspar. At pressures > 8 kbar and temperatures below 800°C, epidote is also formed. Almandine-rich garnet appears above 10 kbar at temperatures ≥ 750°C. The composition of melts is granitic to granodioritic, hence showing the importance of dehydration melting of tonalites for the formation of granitic melts and granulitic restites at pressure-temperature conditions within the continental crust. The melt compositions plot close to the cotectic line dividing the liquidus surfaces between quartz and potassium feldspar in the haplogranite system at 5 kbar and a H 2O = 1. The composition of the melts changes with the composition of the starting material, temperature and pressure. With increasing temperature, the melt becomes enriched in Al2O3 and FeO+MgO. Potash in the melt is highest just when biotite disappears. The amount of CaO decreases up to 900°C at 5 kbar whereas at higher temperatures it increases as amphibole, clinopyroxene and more An-component dissolve in the melt. The Na2O content of the melt increases slightly with increase in temperature. The composition of the melt at temperatures > 900°C approaches that of the starting assemblage. The melt fraction varies with composition and proportion of hydrous phases in the starting composition as well as temperature and pressure. With increasing modal biotite from 20 to 30 wt%, the melt proportion increases from 19.8 to 22.3 vol.% (850°C and 5 kbar). With increasing temperature from 800 to 950°C (at 5 kbar), the increase in melt fraction is from 11 to 25.8 vol.%. The effect of pressure on the melt fraction is observed to be relatively small and the melt proportion in the same assemblage decreases at 850°C from 19.8 vol.% at 5 kbar to 15.3 vol.% at 15 kbar. Selected experiments were reversed at 2 and 5 kbar to demonstrate that near equilibrium compositions were obtained in runs of longer duration. Received: 27 December 1995 / Accepted: 7 May 1996  相似文献   

20.
This experimental study examines the mineral/melt partitioning of incompatible trace elements among high-Ca clinopyroxene, garnet, and hydrous silicate melt at upper mantle pressure and temperature conditions. Experiments were performed at pressures of 1.2 and 1.6 GPa and temperatures of 1,185 to 1,370 °C. Experimentally produced silicate melts contain up to 6.3 wt% dissolved H 2O, and are saturated with an upper mantle peridotite mineral assemblage of olivine+orthopyroxene+clinopyroxene+spinel or garnet. Clinopyroxene/melt and garnet/melt partition coefficients were measured for Li, B, K, Sr, Y, Zr, Nb, and select rare earth elements by secondary ion mass spectrometry. A comparison of our experimental results for trivalent cations (REEs and Y) with the results from calculations carried out using the Wood-Blundy partitioning model indicates that H 2O dissolved in the silicate melt has a discernible effect on trace element partitioning. Experiments carried out at 1.2 GPa, 1,315 °C and 1.6 GPa, 1,370 °C produced clinopyroxene containing 15.0 and 13.9 wt% CaO, respectively, coexisting with silicate melts containing ~1–2 wt% H 2O. Partition coefficients measured in these experiments are consistent with the Wood-Blundy model. However, partition coefficients determined in an experiment carried out at 1.2 GPa and 1,185 °C, which produced clinopyroxene containing 19.3 wt% CaO coexisting with a high-H 2O (6.26±0.10 wt%) silicate melt, are significantly smaller than predicted by the Wood-Blundy model. Accounting for the depolymerized structure of the H 2O-rich melt eliminates the mismatch between experimental result and model prediction. Therefore, the increased Ca 2+ content of clinopyroxene at low-temperature, hydrous conditions does not enhance compatibility to the extent indicated by results from anhydrous experiments, and models used to predict mineral/melt partition coefficients during hydrous peridotite partial melting in the sub-arc mantle must take into account the effects of H 2O on the structure of silicate melts.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号