首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The active geodynamic setting of the Northern Apennines is characterised by extension in the axial zone of the chain, and by a more complex tectonic behaviour in the frontal part of the belt. In the latter sector, moderate seismicity occurs, displaying compressional, strike-slip and extensional focal plane solutions with variably oriented P and T axes. For this area, a review of available geological and geophysical data has been integrated by the analysis of seismic reflection lines calibrated with deep well logs. This study confirms that, as already suggested by some previous workers, thrusting and related folding in the study area ceased in Early Pleistocene times. This feature is in contrast with the hypothesis of active thrusting related to a subducting lithospheric slab beneath the chain—an issue which is largely debated based on available geophysical information. Our analysis shows that the Northern Apennines are characterised by an active tectonic setting which is similar to that of the central and southern portions of the belt. These areas all display a Late Quaternary inactivity of the thrust front. NE–SW oriented extension (perpendicular to the strike of the orogen) is well established in their axial zones, whereas a less homogeneous stress field characterises their external sectors and the adjacent foreland. Within this framework, the seismotectonic behaviour of the Northern Apennines—and probably of the whole Italian peninsula between the Po Plain and the Southern Apennines (north of the Calabrian Arc)—may be interpreted as essentially controlled by two main processes. The first of them involves tectonic uplift, possibly related with slab detachment and associated unbending of the foreland plate. The second process consists of a present-day northwestward motion of the Adria block with respect to stable Europe.  相似文献   

2.
The Northern Marche coastal belt is characterised by a series of NW-SE trending, NE verging folds forming the easternmost edge of the Apennines thrust front. Several geomorphic features suggest that the folds are still growing and hence that the thrust front is active. The occurrence of several historical and instrumental earthquakes (e.g. 1672, 1690, 1786, 1875, 1916, 1930, 1972, all having Me 5.2) suggests that the thrust faults are also seismogenic.We performed a geomorphological analysis to identify and characterise the faults driving the active folds. Our approach assumes that anomalous drainage patterns and deformed Middle-Late Pleistocene alluvial and coastal terraces are indicators of the vertical component of tectonic strain. We identified, mapped and correlated with sea-level fluctuations a sequence of alluvial and coastal terraces. Longitudinal profiles of six rivers (Conca, Foglia, Metauro, Cesano, Misa, and Esino) show that terraces (1) consistently converge downstream, suggesting that they result from regional uplift that dies out near the coast, and (2) some are slightly warped where they cross anticline axes. We interpreted as coastal terraces several land-surface remnants arranged parallel to the present coastline. Lower remnants clearly top off gently landward-tilted coastal deposits. Reconstructed coastal terraces also seem to be tectonically warped.Our results help characterise the geometry and segmentation of a system that generated the largest earthquakes of the region and suggest the loci of potential seismic gaps. We conclude that the earthquake potential of the densely populated northern Marche coastal belt may be substantially higher than currently estimated.  相似文献   

3.
The recent earthquake sequences of 2012 (northern Italy) and 2013 (Marche offshore) provided new, fundamental constraints to the active tectonic setting of the outer northern Apennines. In contrast to the Po Plain area, where the 2012 northern Italy earthquakes confirmed active frontal thrusting, the new focal mechanisms obtained in this study for the 2013 Marche offshore earthquakes indicate that only minor thrust fault reactivation occurs in the Adriatic domain, even for a theoretically favourably oriented maximum horizontal compression. Recent seismicity in this domain appears to be mainly controlled by transcurrent crustal faults dissecting the Apennine thrust belt. The along-strike stress field variation from the Po Plain to the Adriatic area has been quantitatively investigated by applying the multiple inverse method (MIM) to the analysis of the entire seismicity recorded from January 1976 to August 2014, from the top 12 km of the crust (fault plane solutions from 127 earthquakes with MW ≥ 4), allowing us to obtain a comprehensive picture of the state of stress over the outer zone of the fold and thrust belt. The present-day stress field has been defined for 39 cells of 1.5° × 1.5° surface area and 12 km depth. The obtained stress field maps point out that, although the entire outer northern Apennines belt is characterized by a sub-horizontal maximum compressive axis (σ1), the minimum compression (σ3) is sub-vertical only in the Po Plain area, becoming sub-horizontal in the Adriatic sector, thus confirming that the latter region is dominated by an active tectonic regime of strike-slip type.  相似文献   

4.
Geology-based methods for Probabilistic Seismic Hazard Assessment (PSHA) have been developing in Italy. These methods require information on the geometric, kinematic and energetic parameters of the major seismogenic faults. In this paper, we define a model of 3D seismogenic sources in the central Apennines of Italy. Our approach is mainly structural-seismotectonic: we integrate surface geology data (trace of active faults, i.e. 2D features) with seismicity and subsurface geological–geophysical data (3D approach). A fundamental step is to fix constraints on the thickness of the seismogenic layer and deep geometry of faults: we use constraints from the depth distribution of aftershock zones and background seismicity; we also use information on the structural style of the extensional deformation at crustal scale (mainly from seismic reflection data), as well as on the strength and behaviour (brittle versus plastic) of the crust by rheological profiling. Geological observations allow us to define a segmentation model consisting of major fault structures separated by first-order (kilometric scale) structural-geometric complexities considered as likely barriers to the propagation of major earthquake ruptures. Once defined the 3D fault features and the segmentation model, the step onward is the computation of the maximum magnitude of the expected earthquake (M max). We compare three different estimates of M max: (1) from association of past earthquakes to faults; (2) from 3D fault geometry and (3) from geometrical estimate corrected by earthquake scaling laws. By integrating all the data, we define a model of seismogenic sources (seismogenic boxes), which can be directly used for regional-scale PSHA. Preliminary applications of PSHA indicate that the 3D approach may allow to hazard scenarios more realistic than those previously proposed.  相似文献   

5.
Analyses of structural and geomorphological data combined with remote sensing interpretation confirm previous knowledge on the existence of an extensional Quaternary tectonic regime in the Colfiorito area (Umbro-Marchean Central Apennines). This is characterized by a maximum principal axis of finite strain oriented approx. NE–SW, which is the result of a progressive deformation process due to pure and radial extension. Surface geological data, the crustal tectonic setting (reconstructed using a CROP 03 seismic reflection profile), and seismological data relative to the autumn 1997 Colfiorito earthquake sequence constrain the following seismotectonic model. We interpret the seismogenic SW-dipping low-angle normal fault pictured by seismic data as an inverted thrust ramp located in the basement at depth between 5 and 10 km. The surface projection of this seismogenic structure defines a crustal box within which high-angle normal faults are responsible for the deformation of the uppermost crust. The regional patterns of pre-existing basement thrusts therefore control the seismotectonic zoning of the area that cannot be directly related to the high-angle normal fault systems which cut through different crustal boxes; the latter system records, in fact, re-shear along pre-existing normal faults. Moreover, Quaternary slip-rates relative to high-angle normal faults in the Central Apennines are closely related to seismic hazard within each crustal box.  相似文献   

6.
The seismogenic zone of subduction thrust faults   总被引：13，自引：0，他引：13  
Abstract Subduction thrust faults generate earthquakes over a limited depth range. They are aseismic in their seaward updip portions and landward downdip of a critical point. The seaward shallow aseismic zone, commonly beneath accreted sediments, may be a consequence of unconsolidated sediments, especially stable-sliding smectite clays. Such clays are dehydrated and the fault may become seismogenic where the temperature reaches 100--150°C, that is, at a 5--15 km depth. Two factors may determine the downdip seismogenic limit. For subduction of young hot oceanic lithosphere beneath large accretionary sedimentary prisms and beneath continental crust, the transition to aseismic stable sliding is temperature controlled. The maximum temperature for seismic behavior in crustal rocks is ～ 350°C, regardless of the presence of water. In addition, great earthquake ruptures initiated at less than this temperature may propagate with decreasing slip to where the temperature is ～ 450°C. For subduction beneath thin island arc crust and beneath continental crust in some areas, the forearc mantle is reached by the thrust shallower than the 350°C temperature. The forearc upper mantle probably is aseismic because of stable-sliding serpentinite hydrated by water from the underthrusting oceanic crust and sediments. For many subduction zones the downdip seismogenic width defined by these limits is much less than previously assumed. Within the narrowly defined seismic zone, most of the convergence may occur in earthquakes. Numerical thermal models have been employed to estimate temperatures on the subduction thrust planes of four continental subduction zones. For Cascadia and Southwest Japan where very young and hot plates are subducting, the downdip seismogenic limit on the subduction thrust is thermally controlled and is shallow. For Alaska and most of Chile, the forearc mantle is reached before the critical temperature, and mantle serpentinite provides the limit. In all four regions, the seismogenic zones so defined agree with estimates of the extent of great earthquake rupture, and with the downdip extent of the interseismic locked zone.  相似文献   

7.
We have studied the characteristics of the active faults and seismicity in the vicinity of Urumqi city, the capital of Xinjiang Autonomous Region, China, and have proposed a seismogenic model for the assessment of earthquake hazard in this area. Our work is based on an integrated analysis of data from investigations of active faults at the surface, deep seismic reflection soundings,seismic profiles from petroleum exploration, observations of temporal seismic stations, and the precise location of small earthquakes. We have made a comparative study of typical seismogenic structures in the frontal area of the North Tianshan Mountains, where Urumqi city is situated,and have revealed the primary features of the thrust-foldnappe structure there. We suggest that Urumqi city is comprised two zones of seismotectonics which are interpreted as thrust-nappe structures. The first is the thrust nappe of the North Tianshan Mountains in the west, consisting of the lower(root) thrust fault, middle detachment,and upper fold-uplift at the front. Faults active in the Pleistocene are present in the lower and upper parts of this structure, and the detachment in the middle spreads toward the north. In the future, M7 earthquakes may occur at the root thrust fault, while the seismic risk of frontal fold-uplift at the front will not exceed M6.5. The second structure is the western flank of the arc-like Bogda nappe in the east,which is also comprised a root thrust fault, middle detachment, and upper fold-uplift at the front, of which the nappe stretches toward the north; several active faults are also developed in it. The fault active in the Holocene is called the South Fukang fault. It is not in the urban area of Urumqi city. The other three faults are located in the urban area and were active in the late Pleistocene. In these cases,this section of the nappe structure near the city has an earthquake risk of M6.5–7. An earthquake M_S6.6, 60 km east to Urumqi city occurred along the structure in 1965.  相似文献   

8.
The evolution of the Apennines thrust-and-fold belt is related to heterogeneous process of subduction and continental delamination that generates extension within the mountain range and compression on the outer front of the Adria lithosphere. While normal faulting earthquakes diffusely occur along the mountain chain, the sparse and poor seismicity in the compressional front does not permit to resolve the ambiguity that still exists about which structure accommodates the few mm/yr of convergence observed by geodetic data. In this study, we illustrate the 2012 Emilia seismic sequence that is the most significant series of moderate-to-large earthquakes developed during the past decades on the compressional front of the Apennines. Accurately located aftershocks, along with P-wave and Vp/Vs tomographic models, clearly reveal the geometry of the thrust system, buried beneath the Quaternary sediments of the Po Valley. The seismic sequence ruptured two distinct adjacent thrust faults, whose different dip, steep or flat, accounts for the development of the arc-like shape of the compressional front. The first shock of May 20 (Mw 6.0) developed on the middle Ferrara thrust that has a southward dip of about 30°. The second shock of May 29 (Mw 5.8) ruptured the Mirandola thrust that we define as a steep dipping (50–60°) pre-existing (Permo-Triassic) basement normal fault inverted during compression. The overall geometry of the fault system is controlled by heterogeneity of the basement inherited from the older extension. We also observe that the rupture directivity during the two main-shocks and the aftershocks concentration correlate with low Poisson ratio volumes, probably indicating that portions of the fault have experienced intense micro-damage.  相似文献   

9.
南天山地区巴楚-伽师地震(MS6.8)发震构造初步研究   总被引：6，自引：0，他引：6       下载免费PDF全文
新生代期间强烈而持久的再生造山作用,在天山地区形成了大量近EW向逆断裂-褶皱带,引起地壳强烈缩短,穿插有NW向“类转换断层”,显示出天山地区近NS向不均匀的构造挤压作用;区域上地震构造主要为近EW向逆断裂-褶皱带或盲逆断层,其次为NW向“类转换断层”。巴楚-伽师地震区位于南天山柯坪塔格推覆构造系以南,NE向跨越极震区、长约50km的深地震反射探测表明,1997年伽师强震群的发震构造推测为NW向隐伏“类转换断层”,2003年巴楚-伽师地震(MS6·8)的发震构造为柯坪塔格推覆构造系南缘尚未出露地表的近EW向盲逆断层系  相似文献   

10.
利用地震剖面研究夏垫断裂西南段的活动性   总被引：5，自引：1，他引：4  
地震方法是针对厚覆盖区城市直下型活动断裂的一种不可替代的探测技术,对于不同的探测深度需采用不同的排列长度。为研究夏垫断裂在远离三河-平谷8.0级地震震源区的活动性,我们在该震源区SW方向约30km处开展了中浅层反射地震探测试验,并跨过中浅层地震探测到的夏垫断裂进行了浅层反射地震探测试验。浅层和中浅层地震探测的试验结果表明,在5m道间距的地震剖面上,在200m深度以下夏垫断裂得到了较好的反映,在该深度以上,该断裂反映不明显;在2m道间距的地震剖面上,夏垫断裂错断明显,但剖面上的最浅一组反射波(深度约30m)却没有发生明显错断。由此得出:距1679年三河-平谷8.0级地震震源位置SW方向约30km处,夏垫断裂的活动性减弱  相似文献   

11.
The seismogenic structure of the Lushan earthquake has remained in suspensed until now. Several faults or tectonics, including basal slipping zone, unknown blind thrust fault and piedmont buried fault, etc, are all considered as the possible seismogenic structure. This paper tries to make some new insights into this unsolved problem. Firstly, based on the data collected from the dynamic seismic stations located on the southern segment of the Longmenshan fault deployed by the Institute of Earthquake Science from 2008 to 2009 and the result of the aftershock relocation and the location of the known faults on the surface, we analyze and interpret the deep structures. Secondly, based on the terrace deformation across the main earthquake zone obtained from the dirrerential GPS meaturement of topography along the Qingyijiang River, combining with the geological interpretation of the high resolution remote sensing image and the regional geological data, we analyze the surface tectonic deformation. Furthermore, we combined the data of the deep structure and the surface deformation above to construct tectonic deformation model and research the seismogenic structure of the Lushan earthquake. Preliminarily, we think that the deformation model of the Lushan earthquake is different from that of the northern thrust segment ruptured in the Wenchuan earthquake due to the dip angle of the fault plane. On the southern segment, the main deformation is the compression of the footwall due to the nearly vertical fault plane of the frontal fault, and the new active thrust faults formed in the footwall. While on the northern segment, the main deformation is the thrusting of the hanging wall due to the less steep fault plane of the central fault. An active anticline formed on the hanging wall of the new active thrust fault, and the terrace surface on this anticline have deformed evidently since the Quaterary, and the latest activity of this anticline caused the Lushan earthquake, so the newly formed active thrust fault is probably the seismogenic structure of the Lushan earthquake. Huge displacement or tectonic deformation has been accumulated on the fault segment curved towards southeast from the Daxi country to the Taiping town during a long time, and the release of the strain and the tectonic movement all concentrate on this fault segment. The Lushan earthquake is just one event during the whole process of tectonic evolution, and the newly formed active thrust faults in the footwall may still cause similar earthquake in the future.  相似文献   

12.
本文采用双差定位方法对云南鲁甸MS6.5地震震后16天的地震序列进行重定位研究.重定位结果显示,主震位于27.11°N,103.35°E,震源深度约15 km;地震序列主要呈“L”形优势分布,分为SSE向和近EW向两支,并均呈现近垂直的震源分布特征,显示此次地震为走滑型,并存在两个不同方向的破裂面.虽然此次地震发生于NE向昭通断裂及其反冲断裂（龙树断裂、大岩洞断裂）附近,但这些断裂均为逆冲型断裂,被排除了作为发震断裂的可能性;鲁甸地震发生在呈放射性分布的多条断裂的交汇部位,SSE向破裂分支与包谷垴断裂的方向一致,近EW向破裂分支与小河断裂南端的走向一致. 鲁甸地震可能已将包谷垴断裂和小河断裂在深部贯通.  相似文献   

13.
2013年4月20日发生在龙门山南段的芦山MS7.0地震是继发生在龙门山中北段的汶川MS8.0地震之后的又一次强震。本文通过震后地表变形特征、余震分布、震源机制解、石油地震勘探剖面、历史地震数据等资料,结合前人对龙门山南段主干断裂、褶皱构造特征的研究以及野外实地考察,应用活动褶皱及"褶皱地震"的相关理论,初步分析芦山地震的发震构造模式。认为芦山地震为典型的褶皱地震,发震断裂为前山或山前带一隐伏断裂。构造挤压产生的地壳缩短大部分被褶皱构造吸收。认为龙门山南段前缘地区具有活褶皱-逆断层的运动学特征,表明龙门山逆冲作用正向四川盆地内部扩展。  相似文献   

14.
This work presents a structural model for earthquake faulting in the Umbria-Marche Apennines (Central Italy). The model is derived by an integrated analysis of geological, geophysical and seismological data. At regional scale, the distribution and character of the seismicity appear to be mainly controlled by a low-angle east-dipping normal fault (Altotiberina fault, AF). The latter is the lower boundary of an active, continuously deforming hangingwall block moving toward NE. Moderate magnitude earthquakes (4 < M < 6), such as the Norcia 1979 (M = 5.9), the Gubbio 1984 (M = 5.2) and the Colfiorito 1997 (Mmax = 5.9), occur within the active hangingwall block and are related to the activity of major west-dipping normal faults detaching on the AF. The geometry of the deep seismogenic structures is listric (as in the case of Colfiorito) or more complex, because of local reactivation of pre-existing low-angle thrust (e.g. Gubbio) or high-angle strike-slip faults (e.g. Norcia). For all the analysed earthquakes the rupture nucleation is located at the base of the aftershock volumes, near the line of intersection between the SW-dipping normal faults and the east-dipping AF basal detachment. The progressive increase in depth of the earthquake foci from the north–west (e.g. Gubbio, 6–7 km) to the south–east (e.g. Norcia, 11–12 km) appears to be related to the eastward deepening of the basal detachment. These seismotectonic features are relevant for determining the seismogenic potential of the Apennine active faults, which depends not only on the length of the faults, but also on the depth of the detachment zone as well.  相似文献   

15.
陈杰  南凌 《内陆地震》1992,6(1):25-38
通过对发生在活动构造挤压区内的Coalinga、El.Asnam、Spitak等地震实例及新疆活动褶皱的分析研究,提出了活动褶皱的分类、活动褶皱研究的意义、内容、方法及其识别。指出同活动断层相似,活褶皱也有粘滑和蠕滑两种形成机制。年轻而快速增长的活褶皱不仅可能是发生地震的地点,其本身也有可能是连续地震的产物。我们称这些具有粘滑机制的活褶皱为地震褶皱;活动褶皱发育的挤压性构造区具有发生中强地震的潜在危险。地震褶皱则是地震震源的一种“指示构造”。同时作为古地震标志,地震褶皱及其派生的近地表活动弯滑断层和弯矩断层等次生断层,其同震生长和滑动可以提供下伏发震断层的复发间隔及其活动历史;由于逆断型地震其发震道断层的滑动不仅在平面分布上具有不均匀性,而且在剖面分布上也存在不均匀性,其量从震源深处向地表有渐小趋势。故主要根据对第四纪地表变形的分析来进行地震危险性评价的方法。在活动构造挤压区有很大的局限性。而平衡剖面法乃是识别和定量研究活动逆断层,特别是隐伏断层的最好方法。  相似文献   

16.
芦山地震发生在龙门山断裂带前缘.关于芦山地震的发震断层,有的认为是前山断裂——双石—大川断裂,有的认为是山前断裂——大邑断裂拟或其他隐伏断裂,发震断裂究竟是哪条断裂以及芦山地震是不是汶川地震的余震?目前仍存在较大争议.震后穿过芦山地震区完成了一条长近40km的深地震反射剖面,以确定芦山地震的发震构造.反射剖面显示浅部褶皱和断裂构造发育,在上地壳存在6条逆冲断裂,下地壳存在一条非常明显的变形转换带,在深度16km左右还存在一个滑脱层,浅部的6条断裂最终都归并到该滑脱层上.参考主余震精定位结果,芦山地震的发震断裂应该是位于双石—大川断裂和大邑断裂之间的隐伏断裂F4,F2和F3断裂受控于发震断裂而活动,形成剖面上"Y"字型余震分布现象.隐伏断裂F4属山前断裂,不是前山断裂,因此芦山地震不是汶川地震的余震.  相似文献   

17.
Paper describes the extensive work done in the SIGMA project, aimed at improving knowledge on data, methods and tools to better quantify uncertainties in seismic hazard assessment (SHA). The authors cooperated in the study of potential faults and geological structures, earthquake catalogues, selection of ground motion prediction equations, and methods for site effect evaluation suitable for SHA. All the contributions merged into a probabilistic seismic hazard study conducted for three representative sites of the Po Plain in Northern Italy. Po Plain is a low-to-moderate seismicity region, characterized by some critical features, such as blind faulting and deep alluvium sediments, and by scarcity of strong motion data; these sources of uncertainties in seismic hazard estimation are common to other low seismicity areas around the world. Within SIGMA, special care was devoted to: (a) the use of the single station sigma approach inside the probabilistic SHA, (b) the comparative use of generalized attenuation functions to evaluate the hazard contribution of composite fault systems, and (c) the study of the epistemic uncertainties at play when different modelling approaches to site effects are used.  相似文献   

18.
Neogene strain from the subducting Nazca plate is widely distributed in theAndean foreland as a result of flat-lying subduction beneath central westernArgentina (28°–33°S latitude). This fact is indicated byuplifted basement blocks bounded by reverse faults as far as 600 kms eastof the Chilean trench axis. Some deformation in the southern Sierras deCórdoba (southeastern Sierras Pampeanas) indicates significantdisplacements during Quaternary and even late Holocene time. Thisregion has low to moderate seismicity characterized by earthquakemagnitudes 6.7 with no associated noticeable surface ruptures.This paper presents information recently gathered on the most conspicuousregional structures of the area (El Molino, Sierra Chica and Las Lagunasfaults). The last movement along the El Molino fault thrust basement rocksover organic-rich (0.8–1.3 ka) sediment and fault relationships suggestprevious Quaternary displacements. Along the Sierra Chica fault,Precambrian basement has been thrust a minimum of 13.5 m overPleistocene conglomerates, and faulting also affects latePleistocene-Holocene fluvial sediments. The Las Lagunas fault has beenregarded as the source of the 1934 Ms 5.5 and 6.0 earthquakes, whichheavily damaged the nearby village of Sampacho. The faulted surface isburied under Holocene loess, but its trace is expressed as a 24-km-longrectilinear scarp, despite continuous modification due to land use.Although we lack detailed information on probable rupture lengths duringlarge Sierras Pampeanas thrust earthquakes, some preliminary considerationsare made for the regional seismic hazard of these structures. The geologicevidence described here identifies these faults as possible sources of strongearthquakes in the future.  相似文献   

19.
The Longmenshan fault zone is divided into three sections from south to north in the geometric structure. The middle and northern segments are mainly composed of three thrust faults, where the deformation of foreland is weak. The geometric structure of the southern segment is more complex, which is composed of six fault branches, where the foreland tectonic deformation is very strong. The Wenchuan MS8.0 earthquake occurred in the middle of the Longmenshan in 2008, activating the bifurcation of two branches, the Yingxiu-Beichuan and the Guixian-Jiangyou faults. In 2013, the Lushan MS7.0 earthquake occurred in the southern Longmenshan, whose seismogenic structure was considered to be a blind fault. After the Lushan earthquake, the seismic hazard in the southern Longmenshan has been widely concerned. At present, the studies on active tectonics in the southern Longmenshan are limited to the Dachuan-Shuangshi and the Yanjing-Wulong faults. The Qingyi River, which flows across the southern Longmenshan, facilitates to study fault slip by the deformation of river terraces. Based on satellite imagery and high-resolution DEM analysis, we measured the fluvial terraces along the Qingyi river in detail. During the measurement, the Sichuan network GPS system (SCGNSS)was employed to achieve a precision of centimeter grade. Besides, the optical luminescence dating (OSL)method was employed to date the terraces' ages. And the late Quaternary activities of the six branch faults in the southern Longmen Shan were further analyzed. The Gengda-Longdong, Yanjing-Wulong and the Xiao Guanzi faults (west branch of the Dachuan-Shuangshi fault)all show thrust slip and displaced the terrace T2. Their average vertical slip rates in the late Quaternary are 0.21-0.30mm/a, 0.12-0.21mm/a and 0.10-0.12mm/a, respectively. Since the Late Quaternary, vertical slip of the east branch of the Dachuan-Shuangshi fault was not obvious, and the arc-like Jintang tectonic belt was not active. Crustal shortening rate of the southern Longmenshan thrust fault zone in the late Quaternary is 0.48-0.77mm/a, which equals about half of the middle segment of the Longmenshan. Based on the previous study on the tectonic deformation of the foreland, we consider that the foreland fold belt in the southern Longmenshan area has absorbed more than half of the crustal shortening. The three major branch faults in the southern Longmenshan are active in the late Quaternary, which have risk of major earthquakes.  相似文献   

20.
In this paper, observation data in 25 GPS reference stations of China have been analyzed by calculating GPS position coordinate time-series with GIPSY. Result shows there is an obvious trend variation in such time-series. The trend variations of time series along the longitude and latitude coordinate reflect the motion of each position in the global-plate, in which the trend variation in the vertical direction reveals some large-scale construction information or reflects the local movement around the positions. The analysis also shows that such time-series have a variation cycle of nearly 1.02 a, but the reason still remains to be further studied. At the end of this paper, response of the time-series of M S=8.1 Kunlunshan earthquake was analyzed, and the seismogenic process of M S=8.1 Kunlunshan earthquake, according to the time proceeding and the feature of anomaly, was divided into 3 phases—changes in blocks with forces, strain accumulation, quick accumulation and slow release of energy. At the initial stage of seismogenic process of M S=8.1 earthquake and at the imminent earthquake, coseismic process as well as during the post earthquake recovery, anomaly in vertical direction is always in a majority. The anomalous movement in vertical direction at the initial stage resulted in a blocking between faults, while at the middle stage of seismogenic process, the differential movement between blocks are in a majority, which is the major reason causing energy accumulating at the blocking stage of faults.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号