首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 187 毫秒
1.
The Tauern Window exposes a Paleogene nappe stack consisting of highly metamorphosed oceanic (Alpine Tethys) and continental (distal European margin) thrust sheets. In the eastern part of this window, this nappe stack (Eastern Tauern Subdome, ETD) is bounded by a Neogene system of shear (the Katschberg Shear Zone System, KSZS) that accommodated orogen-parallel stretching, orogen-normal shortening, and exhumation with respect to the structurally overlying Austroalpine units (Adriatic margin). The KSZS comprises a ≤5-km-thick belt of retrograde mylonite, the central segment of which is a southeast-dipping, low-angle extensional shear zone with a brittle overprint (Katschberg Normal Fault, KNF). At the northern and southern ends of this central segment, the KSZS loses its brittle overprint and swings around both corners of the ETD to become subvertical, dextral, and sinistral strike-slip faults. The latter represent stretching faults whose displacements decrease westward to near zero. The kinematic continuity of top-east to top-southeast ductile shearing along the central, low-angle extensional part of the KSZS with strike-slip shearing along its steep ends, combined with maximum tectonic omission of nappes of the ETD in the footwall of the KNF, indicates that north–south shortening, orogen-parallel stretching, and normal faulting were coeval. Stratigraphic and radiometric ages constrain exhumation of the folded nappe complex in the footwall of the KSZS to have begun at 23–21 Ma, leading to rapid cooling between 21 and 16 Ma. This exhumation involved a combination of tectonic unroofing by extensional shearing, upright folding, and erosional denudation. The contribution of tectonic unroofing is greatest along the central segment of the KSZS and decreases westward to the central part of the Tauern Window. The KSZS formed in response to the indentation of wedge-shaped blocks of semi-rigid Austroalpine basement located in front of the South-Alpine indenter that was part of the Adriatic microplate. Northward motion of this indenter along the sinistral Giudicarie Belt offsets the Periadriatic Fault and triggered rapid exhumation of orogenic crust within the entire Tauern Window. Exhumation involved strike-slip and normal faulting that accommodated about 100 km of orogen-parallel extension and was contemporaneous with about 30 km of orogen-perpendicular, north–south shortening of the ETD. Extension of the Pannonian Basin related to roll-back subduction in the Carpathians began at 20 Ma, but did not affect the Eastern Alps before about 17 Ma. The effect of this extension was to reduce the lateral resistance to eastward crustal flow away from the zone of greatest thickening in the Tauern Window area. Therefore, we propose that roll-back subduction temporarily enhanced rather than triggered exhumation and orogen-parallel motion in the Eastern Alps. Lateral extrusion and orogen-parallel extension in the Eastern Alps have continued from 12 to 10 Ma to the present and are driven by northward push of Adria.  相似文献   

2.
A new interpretation of the Inntal–Tauern sector of the TRANSALP seismic section is presented. One of the most prominent contrasts in reflectivity in the TRANSALP seismic section is the contact between the Bajuvaric unit in the footwall and the overlying Tirolic unit and its basement across a moderately south-dipping interface. We trace this contact from the surface at the southern margin of the Inn valley to a depth of 5 km. There, the contact is deformed or cut by the Tauern Window northern margin. We define the contact between Bajuvaric and Tirolic units as Brixlegg thrust, which is older than Miocene Tauern window exhumation and has a Paleogene age. The sub-Tauern ramp connects with the Inntal fault system at the surface and roots below the Tauern window. Oblique thrust movements across this fault system in the Miocene caused exhumation of the hanging wall, where the fault has a ramp geometry, which is in the area of the TRANSALP cross section and west of it. East of the TRANSALP cross section, the fault system merges with Alpine basal thrust, which is a flat. No Miocene exhumation occurred above the flat.  相似文献   

3.
The Dashui gold deposit is a structurally controlled, Carlin-type gold deposit hosted by recrystallised limestone in the West Qinling Orogen of Central China. The major, structurally late east-trending Dashui Fault forms the hanging wall to the gold mineralisation at the Dashui mine and defines the contact between Middle Triassic limestone and a steeply dipping overlying succession of Middle Triassic argillaceous limestone, dolomite, and sandstone. Multiple carbonate veins and large-scale supergene enrichment, represented by hematite, goethite, limonite and jarosite, characterise the deposit. Detailed geochronological investigation using zircon SHRIMP U-Pb dating reveals that volcanic rocks closely associated with the Dashui gold deposit were synchronous with the Ge’erkuohe Granite and pre-date mineralisation. The igneous dyke sample from the hanging wall has the same U-Pb zircon age as the footwall, ca. 213 Ma. (U-Th)/He thermochronology on dykes in the hanging wall and footwall of the Dashui Fault yields identical (U-Th)/He zircon ages of ca. 210 Ma but distinct (U-Th)/He apatite ages of ca. 136 and 211 Ma, respectively. Therefore, the hanging wall and footwall are interpreted as having distinct post-mineralisation exhumation histories. Reverse fault movement exhumed the hanging wall ~2 to 4 km since the Late Triassic with the main component of faulting taking place between the Late Triassic and Early Cretaceous. These relationships suggest a Late Triassic to Early Cretaceous age for the primary gold mineralisation at the Dashui gold deposit, with the corollary that any ‘missing portion’ of the deposit, previously hypothesised to exist in the hanging wall of the Dashui Fault, has been eroded away. The mineralisation in the footwall may have been supergene enriched soon after the primary mineralisation was emplaced, because it has been located at shallow depth since the Late Triassic. Semi-quantitative results obtained in this study also constrain the maximum depth of formation of the Dashui gold at no more than 2 km.  相似文献   

4.
The Rhodope Metamorphic Province represents the core of an Alpine orogen affected by strong syn- and postorogenic extension. We report evidence for multiple phases of extensional unroofing from the western border of the Rila Mountains in the lower Rila valley, SW Bulgaria. The most prominent structure is the Rila-Pastra Normal Fault (RPNF), a major extensional fault and shear zone of Eocene to Early Oligocene age. The fault zone includes, from base to top, mylonites, ultramylonites and cataclasites, indicating deformation under progressively decreasing temperature, from amphibolite-facies to low-temperature brittle deformation. It strikes E–W with a top-to-the-N-to NW-directed sense of shear. Basement rocks in the hanging wall and footwall both display amphibolite-facies conditions. The foliation of the hanging-wall gneisses, however, is discordantly cut by the fault, while the foliation of the footwall gneisses is seen to curve into parallelism with the fault when approaching it. Two ductile splays of the RPNF occur in the footwall, which are subparallel to the foliation of the surrounding gneisses and merge laterally into the mylonites of the main fault zone. The concordance between the foliation in the footwall and the RPNF suggests that deformation and cooling in the footwall occurred simultaneously with extensional shearing, while the hanging-wall gneisses had already been exhumed previously. The RPNF is associated with thick deposits of an Early Oligocene, syntectonic breccia on top of its hanging wall. Integrating our results with previous studies, we distinguish the following stages of extensional faulting: (1) Late Cretaceous NW–SE extension (Gabrov Dol Detachment), exhumation of the present day hanging wall of the RPNF; (2) Eocene to Early Oligocene NW–SE to N–S extension (RPNF); (3) Miocene to Pliocene E–W extension (Western Border Fault), formation of the Djerman Graben; (4) Holocene to recent N–S to NW–SE extension (Stob Fault), reactivating the SW part of the Western Border Fault.  相似文献   

5.
Analysis of the Gachsar structural sub-zone has been carried out to constrain structural evolution of the central Alborz range situated in the central Alpine Himalayan orogenic system. The sub-zone bounded by the northward-dipping Kandovan Fault to the north and the southward-dipping Taleghan Fault to the south is transversely cut by several sinistral faults. The Kandovan Fault that controls development of the Eocene rocks in its footwall from the Paleozoic–Mesozoic units in the fault hanging wall is interpreted as an inverted basin-bounding fault. Structural evidences include the presence of a thin-skinned imbricate thrust system propagated from a detachment zone that acts as a footwall shortcut thrust, development of large synclines in the fault footwall as well as back thrusts and pop-up structures on the fault hanging wall. Kinematics of the inverted Kandovan Fault and its accompanying structures constrain the N–S shortening direction proposed for the Alborz range until Late Miocene. The transverse sinistral faults that are in acute angle of 15° to a major magnetic lineament, which represents a basement fault, are interpreted to develop as synthetic Riedel shears on the cover sequences during reactivation of the basement fault. This overprinting of the transverse faults on the earlier inverted extensional fault occurs since the Late Miocene when the south Caspian basin block attained a SSW movement relative to the central Iran. Therefore, recent deformation in the range is a result of the basement transverse-fault reactivation.  相似文献   

6.
Although reverse drag, the down warping of hanging wall strata toward a normal fault, is widely accepted as an indicator of listric fault geometry, previous studies have shown that similar folding may form in response to slip on faults of finite vertical extent with listric or planar geometry. In this study we therefore seek more general criteria for inferring subsurface fault geometry from observations of near-surface deformation by directly comparing patterns of displacement, stress, and strain around planar and listric faults, as predicted by elastic boundary element models. In agreement with previous work, we find that models with finite planar, planar-detached, and listric-detached faults all develop hanging wall reverse-drag folds. All of these model geometries also predict a region of tension and elevated maximum Coulomb stress in the hanging wall suggesting that the distribution and orientation of near-surface joints and secondary faults may also be of limited utility in predicting subsurface fault geometry. The most notable difference between the three models, however, is the magnitude of footwall uplift. Footwall uplift decreases slightly with introduction of a detachment and more significantly with the addition of a listric fault shape. A parametric investigation of faults with constant slip ranging from nearly planar to strongly listric over depths from 1 to 15 km reveals that footwall fold width is sensitive to fault geometry while hanging wall fold width largely reflects fault depth. Application of a graphical approach based on these results as well as more complete inverse modeling illustrates how patterns of combined hanging wall and footwall deformation may be used to constrain subsurface fault geometry.  相似文献   

7.
A balanced cross-section along the Budhi-Gandaki River in central Nepal between the Main Central thrust, including displacement on that fault, and the Main Frontal thrust reveals a minimum total shortening of 400 km. Minimum displacement on major orogen-scale structures include 116 km on the Main Central thrust, 110 km on the Ramgarh thrust, 95 km on the Trishuli thrust, and 56 km in the Lesser Himalayan duplex. The balanced cross-section was also incrementally forward modeled assuming a generally forward-breaking sequence of thrusting, where early faults and hanging-wall structures are passively carried from the hinterland toward the foreland. The approximate correspondence of the forward modeled result to observe present day geometries suggest that the section interpretation is viable and admissible. In the balanced cross-section, the Trishuli thrust is the roof thrust for the Lesser Himalayan duplex. The forward model and reconstruction emphasize that the Lesser Himalayan duplex grew by incorporating rock from the footwall and transferring it to the hanging wall along the Main Himalayan thrust. As the duplex developed, the Lesser Himalayan ramp migrated southward. The movement of Lesser Himalayan thrust sheets over the ramp pushed the Lesser Himalayan rock and the overburdens of the Greater and Tibetan Himalayan rock toward the erosional surface. This vertical structural movement caused by footwall collapse and duplexing, in combination with erosion, exhumed the Lesser Himalaya.  相似文献   

8.
The Brenner Base Tunnel will connect Innsbruck (Austria) and Franzensfeste (Italy) by piercing two of the most important fault structures of the Alps: the Periadriatic fault system (PFS) and the Southern limit of Alpine metamorphism (SAM). (U‐Th)/He dating (apatite) and fission‐track analysis (apatite and zircon) on samples taken during excavation reveal a complex pattern of exhumation through time. The results yield temporal constraints for relative vertical block movement and fault activity. Furthermore, they indicate differential uplift of the northern block along the ~E–W striking PFS and allow locating the position of the SAM in the overtilted nappe stack south of the Tauern Window. Our data strongly support, for the first time, an ongoing north‐side‐up movement along this section of the PFS until at least the end of Miocene.  相似文献   

9.
在龙门山中段小鱼洞地区映秀－北川断裂和彭县－灌县断裂发生了同震位移,同时在该地区新出现了一条北西向的同震破裂带——小鱼洞断裂的破裂带,并分割了两条近于平行的北东向逆冲－走滑型的主断裂。汶川特大地震发生后重点对小鱼洞断裂的地表破裂开展了详细的野外地质填图,利用全站仪和GPS对地表破裂进行了精确的测量。初步调查的结果表明,小鱼洞断裂位于映秀－北川断裂与彭县－灌县断裂之间,走向近于北西向,延伸约15km,以脆性破裂为特征,穿过小鱼洞大桥,并切割了多种类型的地貌单元,使道路发生拱曲、破坏和桥梁垮塌或移位。单个破裂长度在几米到300m不等,其南西盘为上升盘,北东盘为下降盘,平均垂直位错为1.0m,平均水平位错为2.3m,垂直与水平位错量之比1 ∶1～1 ∶2,显示为逆冲分量小于或等于左旋走滑分量,并以左旋走滑作用为主。同时,研究表明小鱼洞断裂属于映秀－北川断裂与彭县－灌县断裂之间的捩断层,其主要特征包括： 1)是在汶川地震中由于龙门山逆冲体之间的差异逆冲运动过程中而形成的断裂; 2)其走向近于北西向,垂直于龙门山北东向的主干断裂,而平行于逆冲体的逆冲运动方向; 3)具有高角度断面的断层,以左旋走滑作用为主。  相似文献   

10.
The Tulungwan-Chaochou Fault system in southern Taiwan represents the boundary between a slate belt of moderate metamorphic grade and a relatively unmetamorphosed fold-and-thrust belt. The offset between hanging wall and footwall of this fault ranges from 7 to 11 km and is considered one of the major tectonostratigraphic faults in Taiwan. This 75-km-long fault system is also one of the most conspicuous topographic features in Taiwan. The geometry, kinematic history and associated subsidiary structures have not been resolved. Field mapping of fabrics and brittle faults show that a 45-km-long west-northwest-vergent antiform defined by folded slaty cleavage exists in the hanging wall of the fault. This antiform has not been previously described and apparently formed in a brittle environment. The flat crest and tight forelimb of the antiform suggests a two-stage deformation model composed of a fault-bend fold followed by a trishear fold. We infer that regional scale fold is associated with a thrust that splays upward from the main detachment.  相似文献   

11.
Monometamorphic metasediments of Paleozoic or Mesozoic age constituting Schneeberg and Radenthein Complex experienced coherent deformation and metamorphism during Late Cretaceous times. Both complexes are part of the Eoalpine high-pressure wedge that formed an intracontinental suture and occur between the polymetamorphosed Ötztal–Bundschuh nappe system on top and the Texel–Millstatt Complex below. During Eoalpine orogeny Schneeberg and Radenthein Complexes were south-dipping and they experienced a common tectonometamorphic history from ca. 115 Ma onwards until unroofing of the Tauern Window in Miocene times. This evolution is subdivided into four distinct tectonometamorphic phases. Deformation stage D1 is characterized by WNW-directed shearing at high temperature conditions (550–600°C) and related to the initial exhumation of the high-pressure wedge. D2 and D3 are largely coaxial and evolved during high- to medium-temperature conditions (ca. 450 to ≥550°C). These stages are related to advanced exhumation and associated with large-scale folding of the high-pressure wedge including the Ötztal-Bundschuh nappe system above and the Texel–Millstatt Complex below. For the area west of the Tauern Window, F2/F3 fold interference results in the formation of large-scale sheath-folds in the frontal part of the nappe stack (formerly called “Schlingentektonik” by previous authors). Earlier thrusts were reactivated during Late Cretaceous normal faulting at the base of the Ötztal–Bundschuh nappe system and its cover. Deformation stage D4 is of Oligo-Miocene age and accounted for tilting of individual basement blocks along large-scale strike-slip shear zones. This tilting phase resulted from indentation of the Southern Alps accompanied by the formation of the Tauern Window.  相似文献   

12.
白云鄂博是世界上最大的稀土矿,其资源储量影响着全球稀土资源配置的格局。稀土矿赋存于碳酸岩中,因钻孔深度所限,碳酸岩深部的延伸情况存在争议,是可以延伸较深的岩浆通道,还是根据三维剪切波速度结构研究结果显示的有限深度(约2.5km)。本文在地表展开矿区及周边岩性-构造填图和所卷入岩石的变形特征研究,将剖面上与平面上的构造样式进行对比,将有利于解决上述争议问题。本次研究在好沁、尖山北部、西矿北部一带发现大型逆冲断层,并将其命名为“好沁-尖山北逆冲断层”。该逆冲断层下盘为互层状的(粗)砂岩、灰岩和泥岩,粗砂岩的碎屑磷灰石下交点最年轻群组为1284±104Ma,砂岩的碎屑锆石最年轻组为1179±8Ma,均比白云鄂博碳酸岩的年龄(约1.3Ga)年轻;结合寒武-奥陶纪化石,厘定下盘地层为下古生界。断层上盘为变砾岩、变石英砂岩、板岩和赋矿碳酸岩,变石英砂岩的碎屑锆石存在1.94Ga和2.55Ga的2个峰值,认为其沉积于古元古代。好沁-尖山北逆冲断层将元古代变沉积岩及赋矿碳酸岩推覆于古生代地层之上,断层面上广泛发育断层泥和断层角砾,厚度自20cm至7m不等,沿断层面有含铁质流体灌入而形成赤铁矿,断层面倾角变化大,从水平到直立产状,可能是受后期褶皱影响的结果;结合卷入断层活动的最年轻地质体为二叠纪花岗岩、以及区域内白垩纪不整合沉积在断层及下伏地层之上,限定好沁-尖山北逆冲断层的活动时代发生于二叠纪之后、白垩纪之前。水源头出露有变石英砂岩飞来峰,白云鄂博矿区与南部约30km处发育相似的、4条NE-SW走向的雁列式排列的航磁异常带,它们限定逆冲推覆距离为8~30km。白云鄂博碳酸岩属于推覆体上盘地质体,好沁-尖山北逆冲断层将其与根部错开,白云鄂博地区的碳酸岩未延伸到断层下盘,下盘岩石可能是古生代岩石,因此,矿区深部的剪切波速度突变可能与该断层的发育相关。  相似文献   

13.
The western Liaodong (辽东) Bay subbasin displays examples of segment,linkage of extensional fault,and fault-related folds.The Liaoxi (辽西) extensional fault system consists of a series of NNE- and NE-trending segments that were linked through relay ramps.The fault hanging walls are characterized by a series of en echelon synclines with axial traces sub-parallel to the faults.The synclines are doubly plunging located on the hanging wall of normal faults,with the strata dip sub-parallel to the fault.These folds result from along-strike displacement variations of the individual fault segments,as well as from extensional fault-related folding.In the study area,the synclines are separated by transverse intra-basin highs and relay ramps that formed where segment linkage occurred.These hanging wall synclines and their relation to fault displacement variations indicate that they are formed by extensional fault-related fold.  相似文献   

14.
The >200 km long Moonlight Fault Zone (MFZ) in southern New Zealand was an Oligocene basin-bounding normal fault zone that reactivated in the Miocene as a high-angle reverse fault (present dip angle 65°–75°). Regional exhumation in the last c. 5 Ma has resulted in deep exposures of the MFZ that present an opportunity to study the structure and deformation processes that were active in a basin-scale reverse fault at basement depths. Syn-rift sediments are preserved only as thin fault-bound slivers. The hanging wall and footwall of the MFZ are mainly greenschist facies quartzofeldspathic schists that have a steeply-dipping (55°–75°) foliation subparallel to the main fault trace. In more fissile lithologies (e.g. greyschists), hanging-wall deformation occurred by the development of foliation-parallel breccia layers up to a few centimetres thick. Greyschists in the footwall deformed mainly by folding and formation of tabular, foliation-parallel breccias up to 1 m wide. Where the hanging-wall contains more competent lithologies (e.g. greenschist facies metabasite) it is laced with networks of pseudotachylyte that formed parallel to the host rock foliation in a damage zone extending up to 500 m from the main fault trace. The fault core contains an up to 20 m thick sequence of breccias, cataclasites and foliated cataclasites preserving evidence for the progressive development of interconnected networks of (partly authigenic) chlorite and muscovite. Deformation in the fault core occurred by cataclasis of quartz and albite, frictional sliding of chlorite and muscovite grains, and dissolution-precipitation. Combined with published friction and permeability data, our observations suggest that: 1) host rock lithology and anisotropy were the primary controls on the structure of the MFZ at basement depths and 2) high-angle reverse slip was facilitated by the low frictional strength of fault core materials. Restriction of pseudotachylyte networks to the hanging-wall of the MFZ further suggests that the wide, phyllosilicate-rich fault core acted as an efficient hydrological barrier, resulting in a relatively hydrous footwall and fault core but a relatively dry hanging-wall.  相似文献   

15.
A low-angle extensional fault system affecting the non metamorphic rocks of the carbonate dominated Tuscan succession is exposed in the Lima valley (Northern Apennines, Italy). This fault system affects the right-side-up limb of a kilometric-scale recumbent isoclinal anticline and is, in turn, affected by superimposed folding and late-tectonic high-angle extensional faulting.The architecture of the low-angle fault system has been investigated through detailed structural mapping and damage zone characterization. Pressure-depth conditions and paleofluid evolution of the fault system have been studied through microstructural, mineralogical, petrographic, fluid inclusion and stable isotope analyses. Our results show that the low-angle fault system was active during exhumation of the Tuscan succession at about 180°C and 5 km depth, with the involvement of low-salinity fluids. Within this temperature - depth framework, the fault zone architecture shows important differences related to the different lithologies involved in the fault system and to the role played by the fluids during deformation. In places, footwall overpressuring influenced active deformation mechanisms and favored shear strain localization.Our observations indicate that extensional structures affected the central sector of the Northern Apennines thrust wedge during the orogenic contractional history, modifying the fluid circulation through the upper crust and influencing its mechanical behavior.  相似文献   

16.
The Têt Fault looks like an active fault. Its activity, attested for Pliocene, remains discussed for Pleistocene. We propose a new scenario of evolution for the Têt Fault, highlighting the importance of Pleistocene exhumation processes. It is based on a relationship between morphology and basin filling. During Pleistocene, the fault activity is weak and vertical displacements seem to have no considerable impact on the drainage features. This study concludes that Pliocene offset may also be reduced: the fault activity generating relief is anterior to Pliocene. To cite this article: J.-M. Carozza, S. Baize, C. R. Geoscience 336 (2004).  相似文献   

17.
The Simplon Fault Zone is a late-collisional low-angle normal fault (LANF) of the Western Alps. The hanging wall shows evidence of brittle deformation only, while the footwall is characterized by a c. 1 km-thick shear zone (the Simplon Fault Zone), which continuously evolved, during exhumation and cooling, from amphibolite facies conditions to brittle-cataclastic deformations. Due to progressive localization of the active section of the shear zone, the thermal-rheological evolution of the footwall resulted in a layered structure, with higher temperature mylonites preserved at the periphery of the shear zone, and cataclasites occurring at the core (indicated as the Simplon Line). In order to investigate the weakness of the Simplon Line, we studied the evolution of brittle/cataclastic fault rocks, from nucleation to the most mature ones. Cataclasites are superposed on greenschist facies mylonites, and their nucleation can be studied at the periphery of the brittle fault zone. This is characterized by fractures, micro-faults and foliated ultracataclasite seams that develop along the mylonitic SCC′ fabric, exploiting the weak phases mainly represented by muscovite and chlorite. Approaching the fault core, both the thickness and frequency of cataclasite horizons increase, and, as their thickness increases, they become less and less foliated. The fault core itself is represented by a thicker non-foliated cataclasite horizon. No Andersonian faults or fractures can be found in the footwall damage zone and core zone, whilst they are present in the hanging wall and in the footwall further from the fault. Applying a stress model based on slip tendency, we have been able to calculate that the friction coefficient of the Simplon Line cataclasites was <0.25, hence this fault zone is absolutely weak. In contrast with other fault zones, the weakening effect of fluids was of secondary importance, since they accessed the fault zone only after an interconnected fracture network developed exploiting the cataclasite network.  相似文献   

18.
The Gubbio fault is an active normal fault defined by an important morphological scarp and normal fault focal mechanism solutions. This fault truncates the inherited Miocene Gubbio anticline and juxtaposes Mesozoic limestones in the footwall against Quaternary lacustrine deposits in the hanging wall. The offset is more than 2000 m of geological throw accumulated during a poly-phased history, as suggested by previous works, and has generated a complex zone of carbonate-rich fault-related structures. We report the results of a multidisciplinary study that integrates detailed outcrop and petrographic analysis of two well-exposed areas along the Gubbio fault zone, geochemical analysis (fluid inclusions, stable isotopes, and trace elements) of calcite-sealed fault-related structures and fault rocks, and biostratigraphic controls. Our aims are: (i) the characterization of the deformation features and their spatial–temporal relationships, and (ii) the determination of the P/T conditions and the fluid behaviour during deformation to achieve a better understanding of fluid–rock interaction in fault zones.We show that few of the observed structures can be attributed to an inherited shortening phase while the most abundant structures and fault rocks are related to extensional tectonics. The outcropping extensional patterns formed at depths less than 2.5–3 km, in a confined fluid system isolated from meteoric water, and the fault structures are the response to a small amount of cumulated displacement, 12–19% of the total geological throw.  相似文献   

19.
北轮台断裂是一条全新世活动断裂,全长约70km,构成了南天山南麓与山前洪积扇的界线。该断裂晚第四纪期间活动性较强,为准确分析北轮台断裂的古地震特征,在野外地质调查的基础上,对变形的微地貌进行测量,在阿克艾肯和帝禾农业两段开挖两个大型古地震探槽,对北轮台断裂古地震进行了反演模拟推演。结果显示:北轮台断裂古地震活动频繁,阿克艾肯段探槽剖面记录到3次古地震事件,垂直累计位移量4.5m,根据逆断层变形特征,建立古地震模型反演分析,多次古地震事件属于原地同震复发,最新一次古地震事件造成的地表垂直位移量为1.5m左右;帝禾农业段活动性稍弱,对探槽剖面影像解译分析,该段记录古地震事件两次,最新一次事件垂直位错量达到1.1m。北轮台断裂记录的古地震事件与上盘存在侵蚀不整合面、下盘存在生长地层的规律一致。  相似文献   

20.
The segmented growth of the Markgrafneusiedl normal fault in the late Miocene clastic sediments of the central Vienna Basin (Austria) was investigated by construction of a detailed three-dimensional (3D) structural model. Using high resolution 3D seismic data, the fault surface and marker horizons in the hanging wall and the footwall of the Markgrafneusiedl Fault were mapped and orientation, displacement and morphology of the fault surface were quantified. Individual, fault segments were identified by direct mapping of the deflection of the marker horizons close to the fault surface. Correlating the size of the identified segments with the magnitude of fault drag and displacement distribution showed that fault evolution progressed in several stages. The proposed method allows the detection of segments that are not recorded by the magnitude of displacement or fault morphology. Most importantly, detailed mapping of marker deflections in the hanging wall could help to constrain equivalent structures in the footwall, which may represent potential hydrocarbon traps.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号