共查询到20条相似文献，搜索用时 109 毫秒
1.
S. Goes F.A. Capitanio G. Morra M. Seton D. Giardini 《Physics of the Earth and Planetary Interiors》2011,184(1-2):1-13
The dynamics of plate tectonics are strongly related to those of subduction. To obtain a better understanding of the driving forces of subduction, we compare relations between Cenozoic subduction motions at major trenches with the trends expected for the simplest form of subduction. i.e., free subduction, driven solely by the buoyancy of the downgoing plate. In models with an Earth-like plate stiffness (corresponding to a plate–mantle viscosity contrast of 2–3 orders of magnitude), free plates subduct by a combination of downgoing plate motion and trench retreat, while the slab is draped and folded on top of the upper-lower mantle viscosity transition. In these models, the slabs sink according to their Stokes’ velocities. Observed downgoing-plate motion–plate-age trends are compatible with >80% of the Cenozoic slabs sinking according to their upper-mantle Stokes’ velocity, i.e., subducting-plate motion is largely driven by upper-mantle slab pull. Only in a few cases, do young plates move at velocities that require a higher driving force (possibly supplied by lower-mantle–slab induced flow). About 80% of the Cenozoic trenches retreat, with retreat accounting for about 10% of the total convergence. The few advancing trench sections are likely affected by regional factors. The low trench motions are likely encouraged by low asthenospheric drag (equivalent to that for effective asthenospheric viscosity 2–3 orders below the upper-mantle average), and low lithospheric strength (effective bending viscosity ～2 orders of magnitude above the upper-mantle average). Total Cenozoic trench motions are often very oblique to the direction of downgoing-plate motion (mean angle of 73°). This indicates that other forces than slab buoyancy exert the main control on upper-plate/trench motion. However, the component of trench retreat in the direction of downgoing plate motion (≈ slab pull) correlates with downgoing-plate motion, and this component of retreat generally does not exceed the amount expected for free buoyancy-driven subduction. High present-day slab dips (on average about 70°) are compatible with largely upper-mantle slab-pull driven subduction of relatively weak plates, where motion partitioning and slab geometry adjust to external constraints/forces on trench motion. 相似文献
2.
Gilles Peltzer 《Earth and Planetary Science Letters》1981,55(3):463-472
Previous studies of plate dynamics suggest that, at consuming plate boundaries, driving forces (negative buoyancy) acting on the slab are counterbalanced by viscous forces, proportional to the consumption velocity and resisting the downgoing motion into the mantle. New observations on the geometry of subduction zones may help test this equilibrium theory. A condition for local equilibrium of the driving and resistive forces is that the consumption velocity (V⊥) remains constant along a given trench. From this condition, a geometrical property of the shape of trenches and island arcs on the sphere is inferred: the consuming margin of two plates should follow segments of helices about the axis of rotation of their relative motion. A comparison of the shape of island arcs and trenches with helices supports this inference. 相似文献
3.
There are three cases of variation of trench location possible to occur during subduction: trench fixed, trench advancing,
and trench retreating. Retreat of trench may lead to back-arc extension. The Pacific plate subducts at low angle beneath the
Eurasia plate, tomographic results indicate that the subducted Pacific slab does not penetrate the 670 km discontinuity, instead,
it is lying flat above the interface. The flattening occurred about 28 Ma ago. Geodynamic computation suggests: when the frontier
of the subducted slab reaches the phase boundary of lower and upper mantle, it may be hindered and turn flat lying above the
boundary, facilitates the retreat of trench and back-arc extension. Volcanism in northeastern China is likely a product of
such retreat of subduction, far field back-arc extension, and melting due to reduce of pressure while mantle upwelling.
Foundation item: National Natural Science Foundation of China (40234042 and 40174027). 相似文献
4.
Introduction Northeastem China has the most strong Cenozoic volcanism in China (Liu, 1999), where dis-tributes more than 500 Cenozoic volcanoes, including sleeping volcanoes of Tianchi Lake (Celes-tial Pond) of Changbai Mountain, and Wudalianchi (Five linked Lakes) (LIU, 1999). Vo lcano ofTianchi Lake of Changbai Mountain consists of basaltic rocks of shield-forming stage andtrachytes and pantellerites in cone-forming stage. It is suggested by study of REE, incompatibleelements a… 相似文献
5.
Zheng-Kang Shen 《Pure and Applied Geophysics》1995,145(3-4):561-577
A Newtonian fluid model is proposed to describe the oblique subduction of a planar 2-D slab. The slab is assumed to subduct in response to the ridge push force exerted along the trench, the slab pull force at the downdip of the slab, the gravitational body force within the slab, and the frictional resistance force at the upper surface of the slab. Because the slab motion along strike is being resisted by the frictional resistance at the interplate coupling area while the slab motion along the trench normal is being maintained by the gravitational pulling, the slab turns gradually toward the trench normal direction as it subducts. This model offers an alternative explanation for earthquake slip partitioning, the observation that the earthquake slip vectors deflect away from the relative plate motion direction toward the trench normal direction along most of the oblique subduction zones worldwide. Numerical models suggest that slip partitioning caused by slab deformation could be as much as 30% at 100 km downdip of the slab. The slab viscosity, the plate coupling width, the interplate resistance coefficient, the slab pull force, and the gravitational body force are all important in determining the geometry of the slab subduction. 相似文献
6.
以GPS观测资料和地震学研究成果为约束，针对不同流变参数的中国大陆岩石圈模型，数值模拟了岩石粘度与中国大陆板块边界作用强度的关系，探讨了陆-陆碰撞对中国大陆分层岩石圈运动的驱动机制．给出了陆-陆碰撞驱动力、附加地形与山根浮力及热浮力对中国大陆构造运动的驱动特点．印度板块、太平洋板块和菲律宾板块对中国大陆驱动的边界作用强度之比约是4：1．25：1，所引起的水平主压应力主要集中在坚硬岩石层；而附加地形等垂直方向作用力在水平方向产生的最大主压应力则主要集中在软弱岩石层．这种垂直方向上的作用力在高原南部地区阻碍陆-陆碰撞向北的推挤运动，在高原东北部增加对其它块体的推挤作用。 相似文献
7.
本文首先论述了板块学说提出的过程和存在的一些不足与疑问,特别是该学说将Holmes（1948）的地幔热对流说作为驱使岩石圈板块运动的动力机制.而后又以青藏高原及邻区为例,根据区域地质、蛇绿岩和地质构造研究的成果,特别是地震测深研究的成果,详细地论证了本区不存在有大洋中脊扩张成为大洋盆地的新大洋和大洋板块简单的B型俯冲模式,但存在有海底扩张的陆间海和海洋地壳板片（蛇绿岩构造岩片）的仰冲以及大陆岩石圈板片复杂的A型俯冲新模式.新模式不是以地幔对流运动,而是以扩张分离A型俯冲的大陆岩石圈板片与软流圈之间的水平剪切相对运动机制作为它的躯动力. 相似文献
8.
汕头－吕宋岛岩石圈速度结构与震源构造──台湾浅滩7．3级地震构造之一 总被引：1，自引：0，他引：1
汕头－吕宋岛岩石圈速度结构剖面，划分出华南陆缘古生代陆壳、陆架区晚古生代－中生代陆壳、陆坡带中生代－早第三纪过渡壳、新生代南海海盆洋壳及吕宋岛中生代－新生代岛弧陆壳与东吕宋海槽洋壳等地壳构造组分，并确定了上述地壳构造之间的边界断裂构造及其性质。结合地震震源分布及机制，初步确定了华南陆架盆岭构造带北、南两侧地震构造的控震构造与发震构造性质及其震源力学特征；１）指出１９９４年９月１６日台湾浅滩７．３级地震属于板缘壳幔地震及造成一千公里有感范围的原因；２）马尼拉海沟的海底地堑构造与南海海盆岩石圈地幔上隆是马尼拉海沟俯冲带震源显示正断层性质的原因，且为被动的或转换俯冲带；３）东吕宋海槽仍属于菲律宾海俯冲带性质；吕宋岛东西两侧俯冲带岩石圈板片震源深度的准三层分布，可能表明俯冲带岩石圈板片存在相应的低速滑移层。 相似文献
9.
The Role of History-Dependent Rheology in Plate Boundary Lubrication for Generating One-Sided Subduction 总被引：1，自引：0，他引：1
Michio Tagawa Tomoeki Nakakuki Masanori Kameyama Fumiko Tajima 《Pure and Applied Geophysics》2007,164(5):879-907
We have developed a two-dimensional dynamical model of asymmetric subduction integrated into the mantle convection without
imposed plate velocities. In this model we consider that weak oceanic crust behaves as a lubricator on the thrust fault at
the plate boundary. We introduce a rheological layer that depends on the history of the past fracture to simulate the effect
of the oceanic crust. The thickness of this layer is set to be as thin as the Earth's oceanic crust. To treat 1-kilometer
scale structure at the plate boundary in the 1000-kilometer scale mantle convection calculation, we introduce a new numerical
method to solve the hydrodynamic equations using a couple of uniform and nonuniform grids of control volumes. Using our developed
models, we have systematically investigated effects of basic rheological parameters that determine the deformation strength
of the lithosphere and the oceanic crust on the development of the subducted slab, with a focus on the plate motion controlling
mechanism. In our model the plate subduction is produced when the friction coefficient (0.004–0.008) of the modeled oceanic
crust and the maximum strength (400 MPa) of the lithosphere are in plausible range inferred from the observations on the plate
driving forces and the plate deformation, and the rheology experiments. In this range of the plate strength, yielding induces
the plate bending. In this case the speed of plate motion is controlled more by viscosity layering of the underlying mantle
than by the plate strength. To examine the setting of the overriding plate, we also consider the two end-member cases in which
the overriding plate is fixed or freely-movable. In the case of the freely-movable overriding plate, the trench motion considerably
changes the dip angle of the deep slab. Especially in the case with a shallow-angle plate boundary, retrograde slab motion
occurs to generate a shallow-angle deep slab. 相似文献
10.
11.
冲绳板块位于菲律宾海板块向欧亚板块俯冲形成的西太平洋边缘活动带上,构造应力场图像及其动力学机制表现得相当复杂．采用伪三维有限元方法,以WSM2008 观测应力场数据的应力取向和应力型两方面指标作为主要约束,对冲绳板块构造应力场进行了数值模拟．通过对计算结果的分析,对模型涉及的各种作用力作出了估计．在此基础上,对冲绳板块岩石层的状态,以及该地区的板块动力学特征进行了探讨,并得到了以下一些初步认识:① 软流层静压推力控制着该地区构造应力场的基本形态;② 冲绳海槽的演化过程,例如该地区的岩石层减薄与其下地幔流的上升等,也在很大程度上影响了该地区的板内应力场空间分布特征;③ 琉球俯冲带边界力的作用是分段的,不同区段作用力对板内应力场的影响有所不同． 相似文献
12.
A present-day tectonic stress map for eastern Asia region 总被引：15，自引：1，他引：15
许忠淮 《地震学报(英文版)》2001,14(5):524-533
Introduction Tectonically the eastern Asia refers to the region bounded by the following three active tec-tonic zones: in the east the western Pacific subduction zone, including Japan trench, Ryukyu trench and Philippine trench; in the southwest the Himalaya continental collision zone and the Burma-arc-Java-trench subduction zone; in the northwest the Tianshan-Baikal continental defor-mation zone (Figure 6). In the world the eastern Asia is one of the regions with the strongest pre-sent-da… 相似文献
13.
Plate tectonics describes the horizontal motions of lithospheric plates,the Earths outer shell,and interactions among them across the Earths surface.Since the establishment of the theory of plate tectonics about half a century ago,considerable debates have remained regarding the driving forces for plate motion.The early"Bottom up"view,i.e.,the convecting mantledriven mechanism,states that mantle plumes originating from the core-mantle boundary act at the base of plates,accelerating continental breakup and driving plate motion.Toward the present,however,the"Top down"idea is more widely accepted,according to which the negative buoyancy of oceanic plates is the dominant driving force for plate motion,and the subducting slabs control surface tectonics and mantle convection.In this regard,plate tectonics is also known as subduction tectonics."Top down"tectonics has received wide supports from numerous geological and geophysical observations.On the other hand,recent studies indicate that the acceleration/deceleration of individual plates over the million-year timescale may reflect the effects of mantle plumes.It is also suggested that surface uplift and subsidence within stable cratonic areas are correlated with plumerelated magmatic activities over the hundred-million-year timescale.On the global scale,the cyclical supercontinent assembly and breakup seem to be coupled with superplume activities during the past two billion years.These correlations over various spatial and temporal scales indicate the close relationship and intensive interactions between plate tectonics and plume tectonics throughout the history of the Earth and the considerable influence of plumes on plate motion.Indeed,we can acquire a comprehensive understanding of the driving forces for plate motion and operation mechanism of the Earth's dynamic system only through joint analyses and integrated studies on plate tectonics and plume tectonics. 相似文献
14.
The time evolution of negative buoyancy of a subducting slab is modelled from the beginning of subduction under various kinematic conditions (dip angle and subduction velocity). The calculations take into account the thermal and density effects of the variations of the thermophysical parameters with temperature and pressure, and of phase transitions. The magnitude of the negative buoyancy increases during subduction of oceanic lithosphere, up to values in the (2–4) × 1013 N m−1 range when the tip of the slab reaches a depth of 600–700 km. If continental material arrives at the trench and is subducted, the downward buoyancy decreases by an amount proportional to the volume of the subducted continental crust. Assuming that subduction stops when the buoyancy becomes zero, and that delamination of the continental crust or slab breakoff do not occur, the maximum downdip length of the subductable continental crust is estimated as a function of the dip angle, subduction velocity and geometry of the margin. In most cases, subduction of continental material down to depths of 100–250 km is possible, and continental subduction can continue for times up to 10–15 Ma if the velocity is low. These estimates are not significantly affected by the hypothetical occurrence of a metastable olivine wedge within the slab, and could be lower bounds if the lower continental crust is mafic and transforms to eclogite. 相似文献
15.
自3 Ma至现今,在欧亚东缘太平洋、菲律宾海板块以较大速率朝NWW方向运动,并沿海沟向欧亚大陆俯冲;同时欧亚板块以较小速率朝SEE方向移动,构成双方向的板块汇聚格局.沿日本岛弧东侧,海洋板片以较小的倾角插入欧亚大陆下面,在浅部产生的挤压变形扩展到日本海东边缘.琉球岛弧的中、北部,菲律宾海俯冲板片的倾角较大,其西南段由NE向转变为EW向,正经历活动的海沟后退与弧后扩张.台湾是3种板块汇聚的交点:欧亚沿马尼拉海沟向东俯冲,吕宋弧与台湾碰撞,使台湾岛陆壳东西向缩短与隆升,形成年轻的造山带,菲律宾海板块沿琉球海沟的西南段向北俯冲到欧亚下面.位于南海与菲律宾海之间的菲律宾群岛是宽的变形过渡带,两侧被欧亚向东、菲律宾海向西俯冲夹击,中间是大型左旋走滑断层.总体上,现今时期的太平洋、菲律宾海板块的西向俯冲运动所产生的变形主要分布在俯冲板片内部及岛弧,未扩散到弧后地区,可能这种俯冲运动产生的水平应力较小,不能阻挡欧亚大陆的向东移动,对大陆内部的现今构造没有明显的影响. 相似文献
16.
Jorge A. Mendiguren Frank M. Richter 《Physics of the Earth and Planetary Interiors》1978,16(4):318-326
Intraplate stresses in middle South America are not negligible. We report thrust-faulting mechanisms for five intraplate earthquakes, which indicate a dominant horizontal deviatoric compressional stress oriented in a NW-SE direction. We conclude that this state of stress is due to forces connected with spreading on the Mid Atlantic Ridge and resistive forces exerted by the Caribbean plate to the north and the Nazca plate to the west. The existence and nature of the resistive forces is inferred from earthquake mechanisms and geological evidence presented in other studies. All the available intraplate stress data for Nazca and South America indicate that both plates are under deviatoric compression generated at spreading centers. The absence of tensional earthquake focal mechanisms, particularly in the Nazca plate near the trench, suggests that the forces associated with the gravitational sinking of subducted lithosphere are locally compensated. We present a simple numerical calculation of a non-subducting plate to show how the compressional deviatoric stresses in middle South America can be used to estimate an upper bound of about 1021 P for the viscosity of the mantle. 相似文献
17.
We report a new model of the upper mantle structure beneath Italy obtained by means of P-wave teleseismic tomography. Besides the recent and remarkable development of the Italian Seismic Network, a high model resolution has been achieved improving the inversion method upon the ACH method used in previous investigations and picking high quality arrival times with the Multi-Channel Cross-Correlation technique. The finer details of our Vp model yield new insights into the heterogeneous structure of the Adria continental lithosphere involved in the collision between the Africa and Europe plates. A wide low Vp anomaly located in the northern Adria mantle, facing the Alpine high Vp slab, supports the idea that the Adria lithosphere has been hydrated and thinned during the Alpine subduction. We argue that this mantle softening may have played a key role in favoring the subsequent delamination of the Adria lithosphere in the northern Apennines. We hypothesize that delamination of continental lithosphere previously thinned in a back-arc setting may be considered a key process to favor subduction polarity reversal and recycling of continental material into the mantle circulation. Conversely, in the central-southern Apennines, the velocity structure is consistent with the existence of a deeper oceanic slab that flattens at the base of the upper mantle, in agreement with the widely accepted geodynamic evolution of the central Mediterranean by slab retreat and back-arc spreading. The oceanic slab is discontinuously detached from the surface plate, suggesting a different structure of the Adria lithosphere, which resists subduction instead of favoring delamination. 相似文献
18.
19.
中国大陆位于欧亚板块的东南部, 受到印度板块、太平洋板块和菲律宾海板块的碰撞挤压与俯冲作用, 其构造应力场形态和动力学机制相当复杂. 本文采用伪三维有限元方法, 以世界应力图2008年版本数据(WSM2008)的应力方向和应力型两类指标作为主要约束, 对中国大陆及邻区的动力驱动机制进行数值模拟, 给出了中国大陆周边地区板块边界力的大小和方向估计. 同时对3个典型情况的数值模型进行了分析. 结果显示, 软流层静压推力对该区域构造应力场影响相对较小, 板块边界力作用则起主导作用; 印度板块在喜马拉雅造山带对欧亚板块的碰撞控制了中国大陆地区应力场的基本形态, 是形成川滇地区走滑型地震为主的重要原因; 琉球海沟——南海海槽俯冲带边界力显示了挤压-张性的分段特性, 贝加尔裂谷表现为拉张作用. 进一步的分析表明, 中国大陆大部分区域内最大水平剪应力分布图像与该地区地震辐射能量密度的分布存在较好的空间正相关性． 相似文献
20.
The Hikurangi Margin is a region of oblique subduction with northwest-dipping intermediate depth seismicity extending southwest from the Kermadec system to about 42°S. The current episode of subduction is at least 16–20 Ma old. The plate convergence rate varies along the margin from about 60 mm/a at the south end of the Kermadec Trench to about 45 mm/a at 42°S. The age of the Pacific lithosphere adjacent to the Hikurangi Trench is not known.The margin divides at about latitude 39°S into two quite dissimilar parts. The northern part has experienced andesitic volcanism for about 18 Ma, and back-arc extension in the last 4 Ma that has produced a back-arc basin onshore with high heaflow, thin crust and low upper-mantle seismic velocities. The extension appears to have arisen from a seawards migration of the Hikurangi Trench north of 39°S. Here the plate interface is thought to be currently uncoupled, as geodetic data indicate extension of the fore-arc basin, and historic earthquakes have not exceededM
s=7.South of 39°S there is no volcanism and a back-arc basin has been produced by downward flexure of the lithosphere due to strong coupling with the subducting plate. Heatflow in the basin is normal. Evidence for strong coupling comes from historic earthquakes of up to aboutM
s=8 and high rates of uplift on the southeast coast of the North Island.The reason for this division of the margin is not known but may be related to an inferred increase, from northeast to southwest, in the buoyancy of the Pacific lithosphere. 相似文献