首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The extent of damage and affected areas in Bhuj earthquake (26th January 2001) has provided a unique opportunity to evaluate a wide range of geotechnical issues. A large area in the Rann of Kutch experienced massive liquefaction resulting in ground subsidence and lateral flow. A large number of dams in the Kutch district suffered moderate to severe damages. Many buildings were damaged and collapsed in the city of Ahmedabad situated on the bank of the Sabarmati River. In this paper, the ground response studies at a site in Ahmedabad City along with observations of geotechnical aspects such as ground cracking, sand volcanoes and liquefaction of soils associated with the Bhuj earthquake are discussed. The ground response studies indicate that the varying degree of damage to multistorey buildings in Ahmedabad in the close proximity of Sabarmati river area was essentially due to the collapse and undesirable settlement of partly saturated silty sand deposits. Large settlements are attributed to amplification of the ground and the near resonance condition. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

2.
On Tuesday, November 17, 2015 at 07:10:07 (UTC) a strong earthquake struck Lefkas Island (Ionian Sea, Western Greece) with magnitude Mw 6.4, depth of about 6 km and epicenter located 20 km southwest of Lefkas town. It was felt in Lefkas Island and the surrounding region and caused the death of two people, the injury of eight others, many earthquake environmental effects (EEE) and damage to buildings and infrastructures. Secondary EEE were observed in western Lefkas and classified as ground cracks, slope movements and liquefaction phenomena. Primary effects directly linked to surface expression of seismogenic source were not detected in the field. The maximum intensity VIIIESI 2007 was assigned to large-volume slope movements along western coastal Lefkas. Damage to buildings was mainly observed in villages located in Dragano-Athani graben arranged almost parallel to the northern segment of the Cephalonia Transform Fault Zone (Lefkas segment). Among structures constructed with no seismic provisions, the stone masonry buildings and monumental structures suffered most damage, while the traditional buildings of the area with dual structural system performed relatively well and suffered minor damage. Reinforced-concrete buildings were affected not so much by the earthquake itself but by the generation of secondary EEE. The maximum seismic intensities VIIIEMS-98 were assigned to villages located in Dragano-Athani graben due to very heavy structural damage observed on masonry buildings mainly attributed to the combination of the recorded high PGA values, the poor antiseismic design and construction of buildings and the geological and tectonic structure of the affected area.  相似文献   

3.
The occurrence of a severe earthquake is a rare event with its effect localized in a limited region. There are no prior indications of its occurrence too; hence experiencing such an event is just a matter of chance, which the author had by virtue of his posting at Bhuj. This paper presents a detailed account of observations made in the wake of the Bhuj earthquake of January 26th 2001, describing physical and mental reactions during the earthquake, the post-quake scenario, the nature and cause of damage to buildings, the trend of aftershocks, various deformities, including ruptures and fissures on the surface of the earth, etc. which may be useful for a detailed study of the seismological activity in the region.  相似文献   

4.
Estimation of seismic hazard in Gujarat region, India   总被引：1，自引：1，他引：0  
The seismic hazard in the Gujarat region has been evaluated. The scenario hazard maps showing the spatial distribution of various parameters like peak ground acceleration, characteristics site frequency and spectral acceleration for different periods have been presented. These parameters have been extracted from the simulated earthquake strong ground motions. The expected damage to buildings from future large earthquakes in Gujarat region has been estimated. It has been observed that the seismic hazard of Kachchh region is more in comparison with Saurashtra and mainland. All the cities of Kachchh can expect peak acceleration in excess of 500?cm/s2 at surface in case of future large earthquakes from major faults in Kachchh region. The cities of Saurashtra can expect accelerations of less than 200?cm/s2 at surface. The mainland Gujarat is having the lowest seismic hazard as compared with other two regions of Gujarat. The expected accelerations are less than 50?cm/s2 at most of the places. The single- and double-story buildings in Kachchh region are at highest risk as they can expect large accelerations corresponding to natural periods of such small structures. Such structures are relatively safe in mainland region. The buildings of 3?C4 stories and tall structures that exist mostly in cities of Saurashtra and mainland can expect accelerations in excess of 100?cm/s2 during a large earthquake in Kachchh region. It has been found that a total of 0.11 million buildings in Rajkot taluka of Saurashtra are vulnerable to total damage. In Kachchh region, 0.37 million buildings are vulnerable. Most vulnerable talukas are Bhuj, Anjar, Rapar, Bhachau, and Mandvi in Kachchh district and Rajkot, Junagadh, Jamnagar, Surendernagar and Porbandar in Saurashtra. In mainland region, buildings in Bharuch taluka are more vulnerable due to proximity to active Narmada-Son geo-fracture. The scenario hazard maps presented in this study for moderate as well as large earthquakes in the region may be used to augment the information available in the probabilistic seismic hazard maps of the region.  相似文献   

5.
Iran is one of the most seismically active countries of the world located on the Alpine-Himalayan earthquake belt. More than 180,000 people were killed due to earthquakes in Iran during the last five decades. Considering the fact that most Iranians live in masonry and non-engineered houses, having a comprehensive program for decreasing the vulnerability of society holds considerable importance. For this reason, loss estimation should be done before an earthquake strikes to prepare proper information for designing and selection of emergency plans and the retrofitting strategies prior to occurrence of earthquake. The loss estimation process consists of two principal steps of hazard analysis and vulnerability assessment. After identifying the earthquake hazard, the first step is to evaluate the vulnerability of residential buildings and lifelines and also the social and economic impacts of the earthquake scenarios. Among these, residential buildings have specific importance, because their destruction will disturb the daily life and result in casualties. Consequently, the vulnerability assessment of the buildings in Iran is important to identify the weak points in the built environment structure. The aim of this research is to prepare vulnerability curves for the residential buildings of Iran to provide a proper base for estimating probable damage features by future earthquakes. The estimation may contribute fundamentally for better seismic performance of Iranian societies. After a brief review of the vulnerability assessment methods in Iran and other countries, through the use of the European Macroseismic method, a model for evaluating the vulnerability of the Iranian buildings is proposed. This method allows the vulnerability assessment for numerous sets of buildings by defining the vulnerability curves for each building type based on the damage observations of previous earthquakes. For defining the vulnerability curves, a building typology classification is presented in this article, which is representative of Iranian building characteristics. The hazard is described in terms of the macroseismic intensity and the EMS-98 damage grades have been considered for classifying the physical damage to the buildings. The calculated vulnerability indexes and vulnerability curves show that for engineered houses there is not any notable difference between the vulnerability of Iranian and Risk-UE building types. For the non-engineered houses, the vulnerability index of brick and steel structures is less than the corresponding values of the other unreinforced masonry buildings of Iran. The vulnerability index of unreinforced and masonry buildings of Iran are larger than the values of the similar types in Risk-UE and so the Iranian buildings are more vulnerable in this regard.  相似文献   

6.

Excavation-induced ground movements and the resulting damages to adjacent structures and facilities is a source of concern for excavation projects in urban areas. The concern will be even higher if the adjacent structure is old or has low strength parameters like masonry building. Frame distortion and crack generation are predictors of building damage resulted from excavation-induced ground movements, which pose challenges to projects involving excavations. This study is aimed to investigate the relation between excavation-induced ground movements and damage probability of buildings in excavation affected distance. The main focus of this paper is on masonry buildings and excavations stabilized using soil nail wall method. To achieve this purpose, 21 masonry buildings adjacent to 12 excavation projects were studied. Parametric studies were performed by developing 3D FE models of brick walls and excavations stabilized using soil nail wall. Finally, probability evaluations were conducted to analyze the outputs obtained from case studies. Based on the obtained results, simple charts were established to estimate the damage of masonry structures in excavation affected distance with two key parameters including “Displacement Ratio” and “Normalized Distance”. The results also highlight the effects of building distance from excavation wall on its damage probability.

  相似文献   

7.
Residential RC framed structures suffered heavily during the 2001 Bhuj earthquake in Gujarat, India. These types of structures also saw severe damage in other earthquakes such as the 1999 Kocaeli earthquake in Turkey and 921 Ji-Ji earthquake in Taiwan. In this paper the seismic response of residential structures was investigated using physical modelling. Idealised soft storey and top heavy, two degrees of freedom (2DOF) portal frame structures were developed and tested on saturated and dry sand models at 25 g using the Schofield Centre 10-m Beam Centrifuge. It was possible to recreate observed field behaviour using these models. As observed in many of the recent earthquakes, soft storey structures were found to be particularly vulnerable to seismic loads. Elastic response spectra methods are often used in the design of simple portal frame structures. The seismic risk of these structures can be significantly increased due to modifications such as removal of a column or addition of heavy water tanks on the roof. The experimental data from the dynamic centrifuge tests on such soft storey or top-heavy models was used to evaluate the predictions obtained from the response spectra. Response spectra were able to predict seismic response during small to moderate intensity earthquakes, but became inaccurate during strong earthquakes and when soil structure interaction effects became important. Re-evaluation of seismic risk of such modified structures is required and time domain analyses suggested by building codes such as IBC, UBC or NEHRP may be more appropriate.  相似文献   

8.

A 6.8-magnitude earthquake that occurred on January 24, 2020, has been effective in Turkey’s eastern regions. The earthquake, with recorded peak ground acceleration (PGA) value of 0.292 g, caused the destruction or heavy damage of buildings, especially in the city center of Elaz?? province. The purpose of this paper was to share the results of detailed investigation in the earthquake-stricken area. Additionally, the causes of damages and failures observed in the buildings were compared to those that had occurred in previous earthquakes in Turkey. In this study, the damages observed in especially RC buildings as well as in masonry and rural buildings were summarized, the lessons learned were evaluated, and the results were interpreted with reference to Turkish earthquake codes. In the study, it was particularly emphasized why the building stock underwent such damage even though the buildings were exposed to earthquake acceleration well below the design acceleration values.

  相似文献   

9.
Prabhas Pande 《Natural Hazards》2013,65(2):1045-1062
Of the intraplate seismic events, the January 26, 2001 Bhuj earthquake (Mw 7.7) would be remembered as one of the deadliest, in which 13,805 human lives were lost, 0.177 million injured and a total of 1,205,198 houses were fully or partly damaged in 16 districts of Gujarat state with an estimated overall loss of Rs. 284, 23 million. The brunt of the calamity was borne by five districts, namely Kachchh, Ahmadabad, Rajkot, Jamnagar and Surendranagar, where 99?% of the total casualties and damage occurred. In the neighbouring parts of Sindhh Province of Pakistan, 40 human casualties were reported, and some buildings cracked in the Karachi city as well. In the Kachchh district of Gujarat state, the telecommunication links and power supply were totally disrupted, road and rail links partially impaired and water supply snapped at many places. The Bhuj airbase had to be closed for some time due to damage to the infrastructure. The macroseismic survey carried out by the Geological Survey of India in an area as large as 1.2 million?sq?km indicated an epicentral intensity as high as X on the MSK scale in an area of 780?sq?km in the central part of Kachchh rift basin. Apart from damages to civil structures, the January 26 earthquake induced conspicuous terrain deformation in the form of liquefaction features, structural ground deformation and low-order slope failures that were mainly prevalent within the higher intensity isoseists. Liquefaction occurred in an area of about 50,000?sq?km. The extensive plains of Rann of Kachchh, the marshy tracts of the Little Rann and the shallow groundwater table zones of Banni Land provided the most conducive geotechnical environments for the development of seismites. The liquefaction activity was profuse in seismic intensity zones X and IX, widespread in intensity VIII, subdued in intensity VII and stray in intensity VI. The common forms of liquefaction were sand blows/boils, ground fissures, craters, lateral spreading and slumping. Ground deformation of tectonic origin was witnessed in the epicentral tract. Such features, though much less subdued in comparison with the 1819 large earthquake (Mw 7.8) in region, occurred along the Kachchh Mainland fault (KMF) and along a transverse lineament, referred to as Manfara?CKharoi fault. The manifestations were in the form of fractures, displacement of strata, linear subsidence, upheaval, formation of micro-basins/micro-ridges, ripping off of rock surface, and at places violent forms of liquefaction. The localities where coseismic deformations were observed include Bodhormora, Sikra, Vondh, Chobari, Manfara and Kharoi. The 2001 event has demonstrated the role of local geology in influencing the ground motion characteristics and, therefore, the hazard estimation.  相似文献   

10.
Collapse of masonry structures during an earthquake is analyzed using the three-dimensional distinct element method (3D-DEM) code developed by the first author. The DEM is a numerical analysis technique, in which positions of elements are calculated by solving equations of motion step by step. Both individual and group behavior can be simulated. The structure is modeled as an assembly of distinct elements connected by virtual springs and dashpots, where elements come into contact. First, the validity of the developed 3D-DEM code is confirmed by comparing analytical results with static experimental results of masonry walls. Second, failure process of masonry buildings due to earthquake is investigated using DEM. Effects of reinforcing methods are also examined. Finally, injury to human bodies in the collapsing masonry buildings is also calculated. Assuming that occupants lie down on the floor, two types of casualty criteria are introduced and assessed.  相似文献   

11.
The current designs of supporting structures of elevated water tanks are extremely vulnerable under lateral forces due to an earthquake and the Bhuj earthquake provided another illustration when a great many water tank stagings suffered damage and a few collapsed. The more popular shaft type stagings suffer from poor ductility of thin shell sections besides low redundancy and toughness whereas framed stagings consist of weak members and poor brace-column joints. A strength analysis of a few damaged shaft type stagings clearly shows that all of them either met or exceeded the strength requirements of IS:1893-1984, however, they were all found deficient when compared with requirements of the International Building Code. IS:1893-1984 is unjustifiably low for these systems which do not have the advantage of ductility and redundancy and are currently being underestimated at least by a factor of 3 and need an upward revision of forces immediately.  相似文献   

12.
Reconnaissance observations are presented on the building damage caused by the May 19, 2011, Kütahya–Simav earthquake in Western Turkey as well as an overview of strong ground motion data recorded during the earthquake is given. According to Disaster and Emergency Management Presidency of Turkey, the magnitude of the earthquake is 5.7 in local magnitude scale. Although the earthquake can be regarded as a moderate event when considering its magnitude and strong motion recordings, it caused excessive structural damage to buildings in Simav district and several villages in the near vicinity. During the field investigation, different types of structural damage were observed mainly in the reinforced concrete frame buildings with infill walls and masonry buildings with various types of construction materials. Observed damage resulted from several deficiencies in structural and non-structural components of the buildings. Poor construction materials and workmanship, non-conforming earthquake-resistant design and construction techniques and non-ductile detailing are the main reasons for such an extensive damage, as observed in many past earthquakes in Turkey.  相似文献   

13.
Damage analysis of masonry structures subjected to rockfalls   总被引：3，自引：2，他引：1  
Masonry structures present substantial vulnerability to rockfalls. The methodologies for the damage quantification of masonry structures subjected to rockfalls are scarce. An analytical procedure for the damage assessment of masonry structures is presented. The procedure comprises three stages: (1) determination of the rockfall impact actions which are applied to a masonry structure, in terms of external forces, using the particle finite element method (PFEM), (2) evaluation of the mechanical properties, modelling of the masonry structure, and calculation of the internal stresses, using the finite element method (FEM), (3) assessment of the damage due to the rockfall actions, applying a failure criterion adapted to masonries, and calculation of the damage in terms of the percentage of the damaged wall surface. Three real rockfall events and their impact on buildings are analysed. A sensitivity analysis of the proposed procedure is then used to identify the variables that mostly affect the extent of the wall damage, which are the masonry width, the tensile strength, the block diameter and lastly, velocity.  相似文献   

14.
A field investigation was conducted near the town of Bala after two strong earthquakes struck the region on December 20 and 27, 2007. The main objectives of this study are to present the results of the field investigation and examine the characteristics of the recorded ground motions and the corresponding response spectra. The focus of the research was on the causes of damage and failures commonly observed in masonry structures. This study classifies single family masonry dwellings in rural areas and investigates the seismic damage in unreinforced masonry structures. Turkish Earthquake Code requirements for masonry buildings are summarized and compared with the field observations. Our field investigation showed that there has been lack of quality control and regulation for the masonry construction. Diagonal shear cracking and out-of-plane failure were the two major factors that contributed to widespread damage in masonry structures.  相似文献   

15.
Observations from the 12 October 1992 Dahshour earthquake in Egypt   总被引：1，自引：0，他引：1  
An earthquake of local magnitude 5.3 (duration magnitudeM d ) on the Richter Scale occurred at Dahshour, 18 km south of Cairo, Egypt, on Monday, 12 October 1992 at 3:09 pm (local time). Numerous aftershocks followed the main event during the following weeks with magnitude up to 4.3. The earthquake occurred in an area that has had no recent seismic activity, and affected many cities in Egypt. Many buildings and monuments were severely damaged or collapsed. Modern concrete skeletal structures suffered minor nonstructural damage. Earthquake physical damage was estimated at about one billion U.S. Dollars. The severity of the damage was mainly due to poor construction materials and detailing, aging, inferior workmanship, and inadequate maintenance. Egypt was generally considered to be an area of moderate seismic activity. In 1989, earthquake provisions were first introduced in the Egyptian Code of Practice for Reinforced Concrete Structures only. The earthquake clearly showed the urgent need for an assessment and rehabilitation program to mitigate seismic risk hazard in existing structures. In addition, future development planning, and earthquake preparedness strategies should implement lessons learned from the event. In this paper, an overview discussion about the observations from the 12 October earthquake is presented.  相似文献   

16.
The Bhuj earthquake (Mw = 7.9) occurred in the western part of India on 26th January 2001 and resulted in the loss of 20,000 lives and caused extensive damage to property. Soil liquefaction related ground failures such as lateral spreading caused significant damage to bridges, dams and other civil engineering structures in entire Kachchh peninsula. The Bhuj area is a part of large sedimentary basin filled with Jurassic, Tertiary and Quaternary deposits. This work pertains to mapping the areas that showed sudden increase in soil moisture after the seismic event, using remote sensing technique. Multi-spectral, spatial and temporal data sets from Indian Remote Sensing Satellite are used to derive the Liquefaction Sensitivity Index (LSeI). The basic concept behind LSeI is that the near infrared and shortwave infrared regions of electromagnetic spectrum are highly absorbed by soil moisture. Thus, the LSeI is herein used to identify the areas with increase in soil moisture after the seismic event. The LSeI map of Bhuj is then correlated with field-based observation on Cyclic Stress Ratio (CSR) and Cyclic Resistance Ratio (CRR), depth to water table, soil density and Liquefaction Severity Index (LSI). The derived LSeI values are in agreement with liquefaction susceptible criteria and observed LSI (R 2 = 0.97). The results of the study indicate that the LSeI after calibration with LSI can be used as a quick tool to map the liquefied areas. On the basis of LSeI, LSI, CRR, CSR and saturation, the unconsolidated sediments of the Bhuj area are classified into three susceptibility classes.  相似文献   

17.
The Bhuj, India, earthquake of 26 January 2001, Ms 7.9, caused dams built on alluvium to sustain damage ranging from cosmetic to severe. Major damage was caused almost entirely by soil liquefaction in the alluvium. The critical factor was the level of earthquake ground motion.

The Bhuj earthquake showed that peak horizontal accelerations (PHAs)≤0.2 g were generally safe. PHAs>0.2 g were hazardous, when unconsolidated granular foundation soils were water saturated. N values of <20 are indicative of susceptibility to soil liquefaction. The Bhuj experience showed that alluvial foundation soils, subject to a PHA>0.2 g, must be evaluated over the full area beneath a new dam and all soils deemed susceptible to liquefaction must be either removed or treated. For remediating an old dam, reliable options are removal and replacement of liquefiable alluvium beneath upstream and downstream portions of the dam, combined with building berms designed to provide stability for the dam should there be a strength loss in soils beneath the dam.  相似文献   


18.
Kachchh region of India is a rift basin filled with sediments from Jurassic to Quaternary ages. This area is tectonically active and witnessed several major earthquakes since the recent historical past. During an earthquake event, the water-laden foundation soil liquefies and causes damage to buildings and other civil engineering structures. The January 26, 2001, Bhuj earthquake demonstrated extensive liquefaction-related damages in entire Kachchh Peninsula. Therefore, evaluation of liquefaction susceptibility of unconsolidated sediments is a vital requirement for developing seismic microzonation maps. In this paper, a new approach involving remote sensing techniques and geotechnical procedures is demonstrated for effective mapping of liquefaction-susceptible areas. The present and paleo-alluvial areas representing unconsolidated sediments were mapped using Landsat-TM data and field reflectance spectra. Spectral discrimination of alluvial area was made using the feature-oriented principal component selection and spectral angle mapping techniques. Subsequently, field geotechnical investigations were carried out in these areas. It is evident from the results that the alluvial soils are predominantly sandy loam with very low (7–28) standard penetration test values. The evaluated factor of safety for these soils varies from 0.43 to 1.7 for a peak ground acceleration of 0.38. Finally, a liquefaction susceptibility map is prepared by integrating results on alluvium distribution, factor of safety, and depth to water table.  相似文献   

19.
Empirical, theoretical or hybrid methods can be used for the vulnerability analysis of structures to evaluate the seismic damage data and to obtain probability damage matrices. The information on observed structural damage after earthquakes has critical importance to drive empirical vulnerability methods. The purpose of this paper is to evaluate the damage distributions based on the data observed in Erzincan-1992, Dinar-1995 and Kocaeli-1999 earthquakes in Turkey utilizing two probability models—Modified Binomial Distribution (MBiD) and Modified Beta Distribution (MBeD). Based on these analyses, it was possible (a) to compare the advantages and limitations of the two probability models with respect to their capabilities in modelling the observed damage distributions; (b) to evaluate the damage assessment for reinforced concrete and masonry buildings in Turkey based on these models; (c) to model the damage distribution of different sub-groups such as buildings with different number of storeys or soil conditions according to the both models. The results indicate that (a) MBeD is more suitable than the MBiD to model the observed damage data for both reinforced concrete and masonry buildings in Turkey; (b) the sub-groups with lower number of stories are located in the lower intensity levels, while the sub-groups with higher number of stories depending on local site condition are concentrated in the higher intensity levels, thus site conditions should also be considered in the assessment of the intensity levels; (c) the detailed local models decrease the uncertainties of loss estimation since the damage distribution of sub-groups can be more accurately modelled compared to the general damage distribution models.  相似文献   

20.
Any earthquake event is associated with a rupture mechanism at the source, propagation of seismic waves through underlying rock and finally these waves travel through the soil layers to the particular site of interest. The bedrock motion is significantly modified at the ground surface due to the presence of local soil layers above the bedrock beneath the site of interest. The estimation of the amplifications in ground response due to the local soil sites is a complex problem to the designers and the problem is more important for mega cities like Mumbai in India, where huge population may get affected due to devastations of earthquake. In the present study, the effect of local soil sites in modifying ground response is studied by performing one dimensional equivalent-linear ground response analysis for some of the typical Mumbai soil sites. Field borelog data of some typical sites in Mumbai city viz. Mangalwadi site, Walkeswar site, BJ Marg near Pandhari Chawl site are considered in this study. The ground responses are observed for range of input motions and the results are presented in terms of surface acceleration time history, ratio of shear stress to vertical effective stress versus time, acceleration response spectrum, Fourier amplitude ratio versus frequency etc. The typical amplifications of ground accelerations considering four strong ground motions with wide variation of low to high MHA, frequency contents and durations are obtained. Results show that MHA, bracketed duration, frequency content have significant effects on the amplification of seismic accelerations for typical 2001 Bhuj motion. The peak ground acceleration amplification factors are found to be about 2.50 for Mangalwadi site, 2.60 for Walkeswar site and 3.45 for BJ Marg site using 2001 Bhuj input motion. The response spectrum along various soil layers are obtained which will be useful for designers for earthquake resistant design of geotechnical structures in Mumbai for similar sites in the absence of site specific data.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号