首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 125 毫秒
1.
西藏易贡大滑坡成因探讨   总被引:2,自引:0,他引:2  
2000年4月9日, 西藏林芝地区波密县易贡藏布札木弄沟发生了体积超过3×108 m3的特大规模滑坡, 这是该沟100年(1900—2000年)来发生的第2次大规模滑坡.在卫星遥感影像分析基础上, 结合地质、气象、地震等资料, 对札木弄沟100年内2次发生特大规模滑坡的原因进行了分析, 表明这2次滑坡是地质构造、地层岩性、新构造运动、水文和气象因素共同作用的结果.分析结果还显示, 札木弄沟已进入下一个物质与能量积累过程, 在适当的外部条件作用下, 有可能再次发生滑坡.   相似文献   

2.
以九寨环线铜匠沟滑坡治理的工程实际,介绍了预应力锚索治理滑坡的设计与施工.  相似文献   

3.
在对陕西省山阳县烟家沟滑坡基本地质特征调查的基础上,利用无人机获取滑坡高程数据,基于高性能矩阵离散元软件MatDEM建立起烟家沟滑坡运动及堆积特征的三维离散元模型,还原了滑坡启动发生的全过程,最终得到了运动速度、滑移距离以及堆积体厚度3个方面特征,取得以下认识:烟家沟滑坡属于高速滑坡;滑坡运动堆积过程分为加速碰撞堆积阶...  相似文献   

4.
黄土地区一些小型沟谷的沟脑和沟岸常发生黄土滑坡, 并沿沟远程滑动数百米至千余米, 有时大量滑体滑出沟口形成大面积的扇状堆积体, 造成严重的灾害损失. 虽然此类滑坡的平面形态与粘性泥流类似, 但其发生除由暴雨直接引发外, 也可能由滞后降水、地震、冻融、灌溉等引发. 泥流型黄土滑坡沿沟道的运动具有明显的相对固定的滑动面和滑动带, 与一般的粘性泥流差异较大, 更具滑坡的特征, 属于一种特殊的黄土滑坡. 暴雨引发的泥流型黄土滑坡的前缘部分滑体可转化为泥流, 形成滑坡-泥流灾害链. 通过对近年来发生的典型泥流型黄土滑坡实例分析, 论述了该类滑坡的特征、成因和灾害属性, 为此类滑坡的研究与防治提供一定的参考.  相似文献   

5.
马有华  左正金  王伟峰  刘春华  刘艳刚 《地下水》2009,31(4):128-129,138
魏家沟滑坡区位于伊河上游魏家沟河北部的斜坡区,为一多期活动的滑坡群,研究其滑坡形成机制和稳定性评价对于后期防治有极大的意义。从滑坡基本条件入手,分析了滑坡的形成机制,计算和评价了滑坡体的稳定性,为后期滑坡的防治设计提供了理论基础和地质依据。  相似文献   

6.
滑坡实时监测就是在滑坡灾害体上实行滑坡变形动态同步的监测,从而掌握监测对象变形动态和发展趋势.向家沟滑坡是巫山县地质灾害实时监测预警示范站一个典型监测点,滑坡威胁着其上的医院、学校、居民及其下方港口码头,对其实时监测数据进行分析,从而对实时监测系统运行状态和滑坡现状进行简要评价.  相似文献   

7.
西宁市北山地区位于地质灾害高易发区,尤其是大寺沟至王家庄段是西宁市特大型地质灾害群中灾害隐患最多、最严重、最危险的区段.在分析该区段滑坡总体特征的基础上,以林家崖滑坡群为研究对象,分析了该滑坡群的空间形态特征、物质组成和结构特征,并选择折线形滑动模型和3种不同工况对其稳定性进行了计算,最后对滑坡群进行了稳定性评价.认为:1)北山大寺沟至王家庄段共发育崩塌危岩31处,大型滑坡体4处,大型泥石流沟2条;2)林家崖滑坡群滑体主要以崩积物为主,物质组分为粉质黏土夹碎块石;3)受地形地貌、地层岩性、降雨制约和人类工程活动影响,滑坡群目前整体处于等速变形阶段,应加强治理,防止变形进一步加剧.研究成果将为该地区严重的地质灾害防治提供基础地质依据.  相似文献   

8.
四川丹巴县典型滑坡GPS监测效果研究   总被引:1,自引:0,他引:1       下载免费PDF全文
本文介绍了利用GPS监测丹巴县甲居滑坡、干桥沟滑坡、红军桥滑坡和亚喀则滑坡昕获得的速度矢量图。监测结果表明:2006年8月~2007年12月甲居滑坡位移量北侧较南侧大,干桥沟滑坡位移量较小;2007年5月~12月红军桥滑坡位移量较小,亚喀则滑坡部分测站位移量较大,变形严重。  相似文献   

9.
2006年7月吾尔塔米斯沟发生了一起浅层推移式滑坡,坡体处于基本稳定状态,但存在着一定的安全隐患.通过现场勘察总结了滑坡结构特征,并通过实验测试确定了滑坡的物理力学指标,建立起与滑坡主勘探线剖面对应的滑坡稳定性分析模型,运用传递系数法计算该滑坡不同工况的稳定系数,对滑坡体稳定性进行评价.上述研究结果表明,该滑坡稳定系数...  相似文献   

10.
应用GPS对向家沟滑坡稳定性进行分析   总被引:4,自引:0,他引:4  
通过对巫山县向家沟滑坡监测系统现阶段GPS监测数据的分析,对向家沟滑坡的稳定性作简要评价——该滑坡目前已经出现细微的形变,从微小的形变量和曲线发展的不显著特征以及结合宏观巡视来看,判定该滑坡变形处于蠕滑变形阶段。  相似文献   

11.
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.  相似文献   

12.
采用盐酸-硝酸-氢氟酸-高氯酸-柠檬酸处理样品,电感耦合等离子体发射光谱法同时测定钼矿中钴、铬、铜、钼、镍、铅、锡、钨、钇、锌10个元素,筛选了不同溶矿方法和仪器参数条件。测定的相对标准偏差(RSD,n=11)均小于3.0%,经国家一级钼矿标准物质分析验证,结果与推荐值吻合。  相似文献   

13.
采用微波消解白云石样品,电感耦合等离子体发射光谱法测定其中铁、铝、钙、镁、钾、钠、硫的氧化物,对微波消解条件和等离子体发射光谱仪的工作条件进行了选择,克服了常规化学分析方法步骤繁琐、耗时长、工作量大的不足。利用所建立的方法快速分析了白云石中铁、铝、钙、镁、钾、钠、硫的含量,结果与标准值或化学法相符,10次测定的相对标准偏差(RSD)7种元素均小于1%,可以满足生产和科研的要求。  相似文献   

14.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.  相似文献   

15.
Mass fractions of S, Cu, Se, Mo, Ag, Cd, In, Te, Ba, Sm, W and Tl were determined by isotope dilution sector field ICP‐MS in the same sample aliquot of reference materials using HF‐HNO3 digestion in PFA beakers in pressure bombs and glassy carbon vessels in a high‐pressure asher (HPA‐S) for comparison. Additionally, Bi was determined by internal standardisation relative to Tl. Because isobaric and oxide interferences pose problems for many of these elements, efficient chromatographic separation methods in combination with an Aridus desolvator were employed to minimise interference effects. Repeated digestion and measurement of geological reference materials (BHVO‐1, BHVO‐2, SCo‐1, MAG‐1, MRG‐1 and UB‐N) gave results with < 5% relative intermediate precision (1s) for most elements, except Bi. Replicates of NIST SRM 612 glass digested on a hot plate were analysed by the same methods, and the results agree with reference values mostly within 2% relative deviation. Data for the carbonaceous chondrites Allende, Murchison, Orgueil and Ivuna are also reported. Digestion in a HPA‐S was as efficient as in pressure bombs, but some elements displayed higher blank levels following HPA‐S treatment. Pressure bomb digestion yielded precise data for volatile S, Se and Te, but may result in high blanks for W.  相似文献   

16.
We derived Sr, Y, Zr, and Ce abundances for a sample of 74 cool dwarfs and subgiants with iron abundances, [Fe/H], between 0.25 and ?2.43. These estimates were obtained using synthetic spectra, assuming local thermodynamic equilibrium (LTE) for Y, Zr, and Ce, allowing for non-LTE conditions for Sr. We used high-resolution (λ/Δλ?40 000 and 60 000) spectra with signal-to-noise ratios between 50 and 200. We find that the Zr/Y, Sr/Y, and Sr/Zr ratios for the halo stars are the same in a wide metallicity range (?2.43 ≤ [Fe/H] ≤ ?0.90), within the errors, indicating a common origin for these elements at the epoch of halo formation. The Zr/Y ratios for thick-disk stars quickly decrease with increasing Ba abundance, indicating a lower rate of production of Zr compared to Y during active thick-disk formation. The thick-disk and halo stars display an increase in the [Zr/Ba] ratio with decreasing Ba abundance and a correlation of the Zr and Eu overabundances relative to Ba. The evolutionary behavior of the abundance ratios found for the thick-disk and halo stars does not agree with current models for the Galaxy’s chemical evolution. The abundance ratios of Y and Zr to Fe and Ba for thin-disk stars, as well as the abundance ratios within each group, are, on average, solar, though we note a slight decrease of Zr/Ba and Zr/Y with increasing Ba abundance. These results provide evidence for a dominance of asymptotic-giant-branch stars in the enrichment of the interstellar medium in heavy elements during the thin-disk epoch, in agreement with the predictions of the nucleosynthesis theory for the main s-process component.  相似文献   

17.
采用粉末压片法制样,选用标准样品,以经验α系数和散射线内标法校正基体效应和元素谱线重叠干扰,使用ZSXPrimusⅡX射线荧光光谱仪对一般地质样品中的铌、钽、锆、铪、铈、镓、钪、铀等稀有元素进行测定,分析结果与标准值和参考值吻合,12次测定的相对标准偏差(RSD)小于10%。  相似文献   

18.
X射线荧光光谱法测定生物样品中氯硫氮磷钾铜锌溴   总被引:4,自引:2,他引:2  
研究了用微晶纤维素垫底镶边粉末压片制样-X射线荧光光谱测定生物样品中的Cl、S、N、P、K、Cu、Zn和Br的分析方法。重点研究了N的分析条件和校正方式,K、Cu和Zn的内标选定,测量次数对测定结果的影响。方法的检出限、精密度和准确度基本满足生物样品的分析要求。方法用于实际生物样品的测定,结果与化学法相符。  相似文献   

19.
Terrestrial geochemistry of Cd,Bi, Tl,Pb, Zn and Rb   总被引:1,自引:0,他引:1  
About 2000 common magmatic, metamorphic and sedimentary rocks and rockforming minerals contained in 465 individual samples have been analyzed for 6 trace metals and potassium with high precision, mainly by combined distillation and AAS methods. Estimates of average abundances in the continental crust are: 98 ppb Cd. 82 ppb Bi. 490 ppb Tl, 14.8 ppm Pb, 77 ppm Zn and 98 ppm Rb (K/Rb: 223). These averages are close to the mean concentrations of the 6 elements in sedimentary and in low to medium grade metamorphic rocks. In relation to the upper mantle the earth's crust has very effectively accumulated Rb, Pb, Tl (and Bi). Cd and Zn are equally distributed between the upper and lower crust. Bi, Tl, Rb, Pb and K are accumulated in the upper relative to the lower continental crust by factors between 3.5 and 1.4. This is mainly due to higher concentrations in granites and lower abundances in granulites relative to gneisses and schists. The five metals form large ions with bulk coefficients less than one for the partition between metamorphic rocks and anatectic granitic melts. The major hosts of Rb, Tl, Pb and Bi in rocks are minerals with 8- to 12-coordinated sites such as mica, K-feldspar, plagioclase etc. (except for some preference of Bi for sphene and apatite). As examples of significant correlations those of Pb with Tl, K, Bi and Rb in mafic rocks and of Bi with K, Rb, Tl and Pb in sedimentary rocks can be reported. In granites and gneisses hydroxyl containing Fe2+-Mg-silicates are major host minerals for Zn and Cd. Except in some carbonate rocks Cd has no preference for Ca minerals.  相似文献   

20.
建立了电感耦合等离子体发射光谱法(ICP-AES)同时测定碳酸盐型、硫酸盐型、氯化物型三种类型卤水中Li、Na、K、Ca、Mg、B、S、Cl等高低含量元素的分析方法。选择仪器最佳的工作条件为射频功率1400W,炬管位置位于-3,载气流量0.60 L/min。确定了各元素测定谱线,使用ICP-AES的双向观测模式、轴向观测模式测定Li、Ca、B、S、Cl以及低含量的K、Mg,径向观测模式测定高含量的Na、K、Mg,可确保卤水中不同含量的元素同时检出。Li、Na、K、Ca、Mg、B、S的检测下限为0.07~3.00 mg/L,Cl的测定下限为165mg/L。方法精密度(RSD,n=10)均小于5%,回收率为92.4%~109.7%。其中Na、K、Mg、S、Cl测定结果与传统方法测定结果基本吻合。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号