共查询到20条相似文献，搜索用时 525 毫秒
1.
Cheng‐Der Wang 《国际地质力学数值与分析法杂志》2005,29(14):1341-1361
This study derives analytical solutions for estimating the lateral stress caused by horizontal and vertical surcharge strip loads resting on a cross‐anisotropic backfill. The following loading types are employed in this work: point load, line load, uniform strip load, upward linear‐varying strip load, upward nonlinear‐varying strip load, downward linear‐varying strip load and downward nonlinear‐varying strip load. The cross‐anisotropic planes are assumed to be parallel to the horizontal surface of the backfill. The solutions proposed herein have never been mentioned in previous literature, but can be derived by integrating the point load solution in a Cartesian co‐ordinate system for a cross‐anisotropic medium. The calculations by the presented solutions are quick and accurate since they are concise and systematized. Additionally, the proposed calculations demonstrate that the type and degree of material anisotropy and the horizontal/vertical loading types decisively influence the lateral stress. This investigation presents examples of the proposed horizontal and vertical strip loads acting on the surface of the isotropic and cross‐anisotropic backfills to elucidate their effects on the stress. The analytical results reveal that the stress distributions accounting for soil anisotropy and loading types are quite different from those computed from the available isotropic solutions. Restated, the derived solutions, as well as realistically simulating the actual surcharge loading circumstances, provide a good reference for the design of retaining structures for the backfill materials are cross‐anisotropic. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
2.
This work presents analytical solutions to compute the vertical stresses for a cross‐anisotropic half‐space due to various loading types by batter piles. The loading types are an embedded point load for an end‐bearing pile, uniform skin friction, and linear variation of skin friction for a friction pile. The cross‐anisotropic planes are parallel to the horizontal ground surface. The proposed solutions can be obtained by utilizing Wang and Liao's solutions for a horizontal and vertical point load acting in the interior of a cross‐anisotropic medium. The derived cross‐anisotropic solutions using a limiting approach are in perfect agreement with the isotropic solutions of Ramiah and Chickanagappa with the consideration of pile inclination. Additionally, the present solutions are identical to the cross‐anisotropic solutions by Wang for the batter angle equals to 0. The influential factors in yielded solutions include the type and degree of geomaterial anisotropy, pile inclination, and distinct loading types. An example is illustrated to clarify the effect of aforementioned factors on the vertical stresses. The parametric results reveal that the stresses considering the geomaterial anisotropy and pile batter differ from those of previous isotropic and cross‐anisotropic solutions. Hence, it is imperative to take the pile inclination into account when piles are required to transmit both the axial and lateral loads in the cross‐anisotropic media. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
3.
依据库仑土压力理论假设,挡土墙土压力由墙后填土在极限平衡状态下出现滑动楔体产生,推导出考虑滑裂面上填土的黏聚力、墙土间黏聚力、黏性土表面出现张拉裂缝、条形荷载下的黏性土主动土压力计算式,并给出临界破裂角的显式解答。当墙后作用有连续均布荷载或不考虑黏性填土表面出现裂缝时,只需取条形荷载到墙顶的距离或计算的裂缝深度为0即可按相同的方法求解。研究表明,由于未考虑条形荷载对临界破裂角的影响,规范方法得到土压力值偏小。该公式适用范围广,尤其对于条形荷载作用墙后任意位置时均可应用,对实际工程中挡土墙的设计计算具有一定应用价值。 相似文献
4.
This article derives the closed‐form solutions for estimating the vertical surface displacements of cross‐anisotropic media due to various loading types of batter piles. The loading types include an embedded point load for an end‐bearing pile, uniform skin friction, and linear variation of skin friction for a friction pile. The planes of cross‐anisotropy are assumed to be parallel to the horizontal ground surface. The proposed solutions are never mentioned in literature and can be developed from Wang and Liao's solutions for a horizontal and vertical point load embedded in the cross‐anisotropic half‐space. The present solutions are identical with Wang's solutions when batter angle equals to 0°. In addition, the solutions indicate that the surface displacements in cross‐anisotropic media are influenced by the type and degree of material anisotropy, angle of inclination, and loading types. An illustrative example is given at the end of this article to investigate the effect of the type and degree of soil anisotropy (E/E′, G′/E′, and ν/ν′), pile inclination (α), and different loading types (a point load, a uniform skin friction, and a linear variation of skin friction) on vertical surface displacements. Results show that the displacements accounted for pile batter are quite different from those estimated from plumb piles, both driven in cross‐anisotropic media. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
5.
Experimental investigations on model counterfort retaining walls have been carried out to study the lateral movement of the
walls and the nature of the failure modes. Mild steel plates of size 1,000 × 900 × 8 mm were used as model retaining walls
and were placed in a tank of size 900 × 900 × 670 mm. Ennore sand, obtained from Madras India, and Fly ash, obtained from
Panki Thermal Power Plant, India were used as backfill material. Tests were carried out both with and without reinforced backfill.
Two types of loading conditions were applied: (i) line load and (ii) uniform surcharge. The shape and size of the failure
wedge was studied by observing displacement of bands of colored through a Perspex plate fixed on one side of the tank. Plots
of overturning moment against the rotation of a wall top show that with the increase in rotation of wall, the overturning
moment decreases. The minimum value of overturning moment is taken as the limiting value. The failure surfaces obtained in
different cases are linear and parabolic in shape. 相似文献
6.
Static and dynamic active earth pressure 总被引：1，自引：1，他引：0
Summary The dynamic active earth pressure on retaining structures due to seismic loading is commonly obtained by using the modified Coulomb's approach which is known as the Mononobe-Okabe method. This method has generally been used for cohesionless soils only. A general solution for the determination of total (i.e. static and dynamic) active earth force for a c- soil as backfill was developed by Prakash and Saran in 1966 based on the simplifying assumption that adhesion between the wall-soil interface is equal to the cohesion of the soil, that the surface of the backfill is horizontal, and that the effect of the vertical acceleration can be neglected. This note presents an improved method for calculating the static and dynamic active force behind a rigid retaining wall based on its geometry, inclination of the backfill, surcharge, strength parameters of the backfill, and the adhesion between the wall face and the soil. The effects of adhesion, inclination of backfill, and vertical components of seismic loading for a typical retaining wall are discussed. 相似文献
7.
In this article, we present the solutions for the stresses induced by four different loads associated with an axially loaded pile in a continuously inhomogeneous cross‐anisotropic half‐space. The planes of cross‐anisotropy are parallel to the horizontal surface of the half‐space, and the Young's and shear moduli are assumed to vary exponentially with depth. The four loading types are: an embedded point load for an end‐bearing pile, uniform skin friction, linear variation of skin friction, and non‐linear parabolic variation of skin friction for a friction pile. The solutions for the stresses due to the pile load are expressed in terms of the Hankel integral and are obtained from the point load solutions of the same inhomogeneous cross‐anisotropic half‐space which were derived recently by the authors (Int. J. Rock Mech. Min. Sci. 2003; 40 (5):667–685). A numerical procedure is proposed to carry out the integral. For the special case of homogeneous isotropic and cross‐anisotropic half‐space, the stresses predicted by the numerical procedure agree well with the solutions of Geddes and Wang (Geotechnique 1966; 16 (3):231–255; Soils Found. 2003; 43 (5):41–52). An illustrative example is also given to investigate the effect of soil inhomogeneity, the type and degree of soil anisotropy, and the four different loading types on the vertical normal stress. The presented solutions are more realistic in simulating the actual stratum of loading problem in many areas of engineering practice. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
8.
9.
Analysis and Design of Retaining Wall having Reinforced Cohesive Frictional Backfill 总被引：1，自引：0，他引：1
The case of a rigid wall with inclined back face retaining reinforced cohesive-frictional backfill subjected to uniformly
distributed surcharge load has been analyzed using limit equilibrium approach. The analysis considers the stability of an
element of the failure wedge, which is assumed to develop in the reinforced earth mass adjoining the back face of wall. The
non-dimensional charts have been developed for computing the lateral earth pressure on wall and the height of its point of
application above the base of wall. The theoretical findings have been verified by model tests on a rigid wall retaining a
dry cohesive-frictional soil reinforced by geogrid strips. Experimental results are in good agreement with the theoretical
predictions. A design example has been included to illustrate the design procedure. 相似文献
10.
In many areas of engineering practice, applied loads are not uniformly distributed but often concentrated towards the centre of a foundation. Thus, loads are more realistically depicted as distributed as linearly varying or as parabola of revolution. Solutions for stresses in a transversely isotropic half‐space caused by concave and convex parabolic loads that act on a rectangle have not been derived. This work proposes analytical solutions for stresses in a transversely isotropic half‐space, induced by three‐dimensional, buried, linearly varying/uniform/parabolic rectangular loads. Load types include an upwardly and a downwardly linearly varying load, a uniform load, a concave and a convex parabolic load, all distributed over a rectangular area. These solutions are obtained by integrating the point load solutions in a Cartesian co‐ordinate system for a transversely isotropic half‐space. The buried depth, the dimensions of the loaded area, the type and degree of material anisotropy and the loading type for transversely isotropic half‐spaces influence the proposed solutions. An illustrative example is presented to elucidate the effect of the dimensions of the loaded area, the type and degree of rock anisotropy, and the type of loading on the vertical stress in the isotropic/transversely isotropic rocks subjected to a linearly varying/uniform/parabolic rectangular load. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
11.
通过室内模型试验,实测得到试验条件下,天然地基和刚性桩复合地基作用在不允许有位移的刚性挡土墙上的侧向土压力;通过与天然地基对比分析,获得了刚性桩复合地基的侧向土压力特性及分布规律。结果表明,刚性桩复合地基中桩的参与（包括桩的荷载深层传递作用、桩负摩擦区的影响和桩体对桩间土水平附加应力的“遮拦”作用等）使复合地基侧向土压力大小和分布规律明显区别于天然地基;在给定荷载水平下,刚性桩复合地基的侧向土压力值低于天然地基,侧向土压力影响范围较天然地基作用位置更深;在试验条件下,刚性挡土墙距离建筑物0.35～1.4 m范围内,当荷载水平达到地基承载力特征值时,刚性桩复合地基作用在刚性挡土墙上的总土压力和附加土压力约为天然地基的43.3%～80.1%和15.9%～59.8%。 相似文献
12.
为研究加筋土桥台结构在顶部条基动载作用下的动力响应问题,通过MTS伺服加载系统施加循环动载,开展室内加筋桥台挡墙动载破坏试验,对比分析3种格栅长度和3类格栅型式的加筋土挡墙沉降及面板水平位移、土压力、筋材应变等参数的分布规律,揭示加筋桥台挡墙的动力承载性能。试验结果表明：在循环动载下不同格栅长度及型式的加筋桥台挡墙破坏模式存在差异,M、A、B型格栅加筋长度 1.0H（H为挡墙高）的挡墙破坏模式均为冲切剪切破坏,A、B型格栅 0.7H和 0.4H的挡墙破坏模式为局部剪切破坏。加筋桥台挡墙面板侧移随筋材长度增加依次减小,A型格栅加筋土挡墙侧移系数总体上相比B型小。桥台挡墙因加筋格栅长度及型式不同导致动土压力衰减规律差异明显,当 1.0H时M型及A型筋材竖向动土压力衰减系数沿墙高呈抛物线函数模型,当 0.7H时,A型和B型筋材竖向动土压力衰减系数沿墙高皆呈指数函数模型。 相似文献
13.
P. H. Morris 《国际地质力学数值与分析法杂志》2005,29(2):127-140
Analytical solutions are presented for linear finite‐strain one‐dimensional consolidation of initially unconsolidated soil layers with surcharge loading for both one‐ and two‐way drainage. These solutions complement earlier solutions for initially unconsolidated soil layers without surcharge and initially normally consolidated soil layers with surcharge. Small‐strain solutions for the consolidation of initially unconsolidated soil layers with surcharge loading are also presented, and the relationship between the earlier solutions for initially unconsolidated soil without surcharge and the corresponding small‐strain solutions, which was not addressed in the earlier work, is clarified. The new solutions for initially unconsolidated soil with surcharge loading can be applied to the analysis of low stress consolidation tests and to the partial validation of numerical solutions of non‐linear finite‐strain consolidation. They also clarify a formerly perplexing aspect of finite‐strain solution charts first noted in numerical solutions. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
14.
Kourosh Ghaffari Irdmoosa 《Geomechanics and Geoengineering》2019,14(2):71-84
The current study was undertaken to study the effect of soil arching on active earth pressure distribution in retaining walls with c–φ backfill. An analytical approach is presented to develop a general solution considering the effects of surcharge, backfill soil cohesion and slip surface inclination. The magnitude and height of the application of lateral active force is also derived. The results from the proposed equation corresponded to the measured results from a full-scale test, shows non-linear pressure distribution with zero pressure at wall base and less pressure in deeper heights compared to Coulomb’s method. According to the results of parametric analysis, the proposed equation predicts the active earth thrust nearly equal to that of the Coulomb’s equation, however, the surcharge-induced soil pressure is obtained approximately 50% greater than the conventional equation. Moreover, the height of application of active thrust is located at the height of 0.4H from the wall base. These indicate that using the Coulomb’s active equation for retaining walls design, is not in the safe side. 相似文献
15.
16.
17.
Udit Shankar Dasgupta Vinay Bhushan Chauhan 《Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards》2017,11(3):247-256
The present study investigates the influence of spatial variability of soil properties on the lateral thrust and failure surface of a 6?m high frictionless rigid earth retaining wall in active condition. The drained friction angle of the soil is modelled as a log-normal anisotropic random field in two dimensions, using the Cholesky decomposition technique. The effect of horizontal and vertical scale of fluctuation is observed on the lateral thrust. The failure surface in the backfill is found to be more or less similar for different combinations of spatial variability in vertical and horizontal directions. Monte-Carlo simulation technique is used to compute the probability of failure and to obtain the worst-case spatial variability configuration. 相似文献
18.
In practical engineering, an applied rectangular area load is not often horizontally or vertically distributed but is frequently inclined at a certain angle with respect to the horizontal and vertical axes. Thus, the solutions of displacements and stresses due to such a load are essential to the design of foundations. This article yields the analytical solutions of displacements and stresses subjected to a uniform rectangular load that inclines with respect to the horizontal and vertical axes, resting on the surface of a cross‐anisotropic geomaterial. The planes of cross‐anisotropy are assumed to be parallel to the horizontal ground surface. The procedures to derive the solutions can be integrated the modified point load solutions, which are represented by several displacement and stresses elementary functions. Then, upon integrations, the displacement and stress integral functions resulting from a uniform inclined rectangular load for (1) the displacements at any depth, (2) the surface displacements, (3) the average displacements in a given layer, (4) the stresses at any depth, and (5) the average stresses in a given layer are yielded. The proposed solutions are clear and concise, and they can be employed to construct a series of calculation charts. In addition, the present solutions clarify the load inclinations, the dimensions of a loaded rectangle, and the analyzed depths, and the type and degree of geomaterial anisotropy profoundly affect the displacements and stresses in a cross‐anisotropic medium. Parametric results show that the load inclination factor should be considered when an inclined rectangular load uniformly distributed on the cross‐anisotropic material. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
19.
轴向荷载对斜桩水平承载特性影响试验及理论研究 总被引：1，自引：0，他引：1
斜群桩受水平荷载作用时,群桩中的基桩受到径向荷载、轴向荷载和弯矩的共同作用。为研究轴向荷载对斜桩水平承载特性的影响,完成了3根单桩以及1组1×2斜桩的大尺寸模型试验。试验结果表明：轴向拉力作用会降低斜桩的水平刚度和极限承载力;而轴向压力作用则会使其水平刚度和极限承载力提高。基于桩侧浅层土体楔形破坏假定,推导了考虑轴向荷载影响的斜桩水平极限土抗力计算公式,提出了桩侧土抗力的p-y曲线方法,并通过模型试验及现场试验验证其合理性。 相似文献