首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 761 毫秒
1.
Our survey of type 4–6 ordinary chondrites indicates that gas-poor, melt-rock and/or exotic clast-bearing fragmental breccias constitute 5%, 22% and 23%, respectively, of H, L and LL chondrites. These abundances contrast with the percentages of solar-gas-rich regolith breccias among ordinary chondrites: H (14%), L (3%) and LL (8%) (Crabb and Schultz, 1981). Petrologic study of several melt-rock-clast-bearing fragmental breccias indicates that some acquired their clasts prior to breccia metamorphism and others acquired them after metamorphism of host material. In general, the melt-rock clasts in gas-poor H chondrite fragmental breccias were acquired after breccia metamorphism and were probably formed by impacts into boulders or exposed outcrops of H4-6 material in the H chondrite parent body regolith. In contrast, most of the melt-rock clasts in gas-poor L and LL fragmental breccias were acquired prior to breccia metamorphism. The low abundance of regolith breccias among L chondrites and evidence that at least two-thirds of the L chondrites suffered a major shock event 0.5 Gyr ago, suggest that the L parent body may have been disrupted by a major collision at that time and that the remaining parent body fragments were too small to develop substantial regoliths (e.g., Heymann, 1967; Crabb and Schultz, 1981). Such a disruption would have exposed a large amount of L chondrite bedrock, some of which would consist of fragmental breccias that acquired melt-rock clasts very early in solar system history, prior to metamorphism. The exposed bedrock would serve as a potential target for sporadic meteoroid impacts to produce a few fragmental breccias with unmetamorphosed melt-rock clasts. The high proportion of genomict brecciated LL chondrites reflects a complex collisional history, probably including several episodes of parent body disruption and gravitational reassembly. Differences in the abundances of different kinds of breccias among the ordinary chondrite groups are probably due to the stochastic nature of major asteroidal collisions.  相似文献   

2.
The outcomes of asteroid collisional evolution are presently unclear: are most asteroids larger than 1 km size gravitational aggregates reaccreted from fragments of a parent body that was collisionally disrupted, while much smaller asteroids are collisional shards that were never completely disrupted? The 16 km mean diameter S-type asteroid 433 Eros, visited by the NEAR mission, has surface geology consistent with being a fractured shard. A ubiquitous fabric of linear structural features is found on the surface of Eros and probably indicates a globally consolidated structure beneath its regolith cover. Despite the differences in absolute scale and in lighting conditions for NEAR and Hayabusa, similar features should have been found on 25143 Itokawa if present. This much smaller, 320 m diameter S-asteroid was visited by the Hayabusa spacecraft. Comparative analyses of Itokawa and Eros geology reveal fundamental differences, and interpretation of Eros geology is illuminated by comparison with Itokawa. Itokawa lacks a global lineament fabric, and its blocks, craters, and regolith may be inconsistent with formation and evolution as a fractured shard, unlike Eros. An object as small as Itokawa can form as a rubble pile, while much larger Eros formed as a fractured shard. Itokawa is not a scaled-down Eros, but formed by catastrophic disruption and reaccumulation.  相似文献   

3.
The surface topography of Asteroid 25143 Itokawa is explored using the LIght Detection And Ranging instrument (LIDAR). The data confirm the presence of a rough highland and a smooth lowland. The highland is dominated by boulders, but also possesses topography associated with surface lineaments and broad surface facets. The boulders ensure that the roughness of the highlands over short distances is typically greater relative to most surfaces on 433 Eros. Over larger distances, Itokawa is always smoother than Eros possibly because of its smaller size and weak rubble-pile structure. The lowlands of Itokawa are very smooth, and are typically devoid of boulders. Some transitional regions midway between the highlands and lowlands also exist. In these areas, craters that retain their regolith fill possess flat floors and resemble “ponds” seen on 433 Eros. Analyses of surface elevation, imagery and a quantitative measure of surface roughness are consistent with regolith flowing downhill from the highlands to fill in the low areas of Itokawa, probably covering up any pre-existing rough terrain. Using this interpretation, we find a minimum 2.3±0.4 m thick layer of regolith in the lowlands, which, if spread evenly across the entire asteroid, corresponds to a 42±1 cm thick layer. It is very difficult to generate this amount of regolith with the population of craters seen on Itokawa. However, an Itokawa composed of several large masses may have retained this regolith during its formation. The presence of such large masses could account for the observed lineaments and what appear to be exposures of bedrock on the largest steep slope observed.  相似文献   

4.
P. Michel  D.P. O'Brien  S. Abe  N. Hirata 《Icarus》2009,200(2):503-513
In this paper, we study cratering and crater erasure processes and provide an age estimate for the near-Earth Asteroid (25143) Itokawa, the target of the mission Hayabusa, based on its crater history since the time when it was formed in the main belt by catastrophic disruption or experienced a global resetting event. Using a model which was applied to the study of the crater history of Gaspra, Ida, Mathilde and Eros [O'Brien, D.P., Greenberg, R., Richardson, J.E., 2006. Icarus 183, 79–92], we calculate the time needed to accumulate the craters on Itokawa's surface, taking into account several processes which can affect crater formation and crater erasure on such a low-gravity object, such as seismic shaking. We use two models of the projectile population and two scaling laws to relate crater diameter to projectile size. Both models of the projectile population provide similar results, and depending on the scaling law used, we find that the time necessary to accumulate Itokawa's craters was at least ∼75 Myr, and maybe as long as 1 Gyr. Moreover, using the same model and similar parameters (scaled accordingly), we provide a good match not only to Itokawa's craters, but also to those of Eros, which has also been imaged at high enough resolution to give crater counts in a similar size range to those on Itokawa. We show that, as for Eros, the lack of small craters on Itokawa is consistent with erasure by seismic shaking, although for Itokawa, the pronounced deficiency of the smallest craters (<10 m in diameter) requires another process or event in addition to just seismic shaking. A small body such as Itokawa is highly sensitive to specific events that may occur during its history. For example, the two parts of Itokawa, called head and body, may well have joined each other by a low-velocity impact within the last hundred thousand years [Scheeres, D.J., Abe, M., Yoshikawa, M., Nakamura, R., Gaskell, R.W., Abell, P.A., 2007. Icarus 188, 425–429]. In addition to providing an erasure mechanism for small craters, the proposed timescale of that event is consistent with the timescale necessary in our model to form the current, depleted population of just a few small (<10 m) craters on Itokawa, suggesting that it may be the explanation for the discrepancy between Itokawa's cratering record and that obtained from our equilibrium seismic shaking model. Other explanations for the depletion of the smallest craters on Itokawa, such as armoring by boulders lying on the surface, cannot be ruled out.  相似文献   

5.
Laboratory impact experiments have found that the shape of fragments over a broad size range is distributed around the mean value of the axial ratio 2:√2:1, which is independent of a wide range of experimental conditions. We report the shape statistics of boulders with size of 0.1-30 m on the surface of Asteroid 25143 Itokawa based on high-resolution images obtained by the Hayabusa spacecraft in order to investigate whether their shape distribution is similar to the distribution obtained for fragments (smaller than 0.1 m) in laboratory impact experiments. We also investigated the shapes of boulders with size of 0.1-150 m on Asteroid 433 Eros using a few arbitrary selected images by the NEAR spacecraft, in order to compare those with the shapes on Asteroid Itokawa. In addition, the shapes of small- and fast-rotating asteroids (diameter <200 m and rotation period <1 h), which are natural fragments from past impact events among asteroids, were inferred from archived light curve data taken by ground-based telescopes. The results show that the shape distributions of laboratory fragments are similar to those of the boulders on Eros and of the small- and fast-rotating asteroids, but are different from those on Itokawa. However, we propose that the apparent difference between the boulders of Itokawa and the laboratory fragments is due to the migration of boulders. Therefore, we suggest that the shape distributions of the boulders ranging from 0.1 to 150 m in size and the small- and fast-rotating asteroids are similar to those obtained for the fragments generated in laboratory impact experiments.  相似文献   

6.
A photometric analysis of the S-type Asteroid 25143 Itokawa is performed over multiple wavelengths ranging from 0.85 to 2.10 μm based on disk-resolved reflectance spectra obtained with the Hayabusa near-infrared spectrometer (NIRS). We derive the global photometric properties of Itokawa in terms of Hapke's photometric model. We find that Itokawa has a single-scatter albedo that is 35-40% less than that of Asteroid 433 Eros. Itokawa also has a single-particle phase function that is more strongly back-scattering than that of Eros. Despite its hummocky surface strewn with large boulders, Itokawa exhibits an opposition effect. However, the total amplitude of the opposition surge for Itokawa was estimated to be less than unity while Eros and other S-type asteroids have been found to have model values exceeding unity. The wavelength dependence of the opposition surge width reveals that coherent backscatter contributes to the opposition effect on Itokawa's surface. The photometric roughness of Itokawa is well constrained to a value of 26° ± 1° which is similar to Eros, suggesting that photometric roughness models the smallest surface roughness scale for which shadows exist.  相似文献   

7.
Abstract— Six ordinary chondrite breccias from the Museo Nacional de Ciencias Naturales, Madrid (Spain), are described and classified as follows: the solar gas-rich regolith breccia Oviedo (H5); the pre-metamorphic fragmental breccias Cabezo de Mayo (type 6, L-LL), and Sevilla (LL4); the fragmental breccias Cañellas (H4) and Gerona (H5); and the impact melt breccia, Madrid (L6). We confirm that chondrites with typical light-dark structures and petrographic properties typical of regolith breccias may (Oviedo) or may not (Cañellas) be solar gas-rich. Cabezo de Mayo and Sevilla show convincing evidence that they were assembled prior to peak metamorphism and were equilibrated during subsequent reheating. These meteorites contain small melt rock clasts that were incorporated into the host chondrite while still molten and/or plastic and cooled rapidly and, yet, are totally equilibrated with their hosts. Compositions of olivine and low-Ca pyroxene in host chondrite and breccia clasts in Cabezo de Mayo are transitional between groups L and LL. It is suggested, based on mineralogic and oxygen isotopic compositions of host and clasts, that the rock formed on the L parent body by mixing, prior to peak metamorphism. This was followed by partial equilibration of two different materials: the indigenous L chondrite host and exotic LL melt rock clasts.  相似文献   

8.
We report the B abundances and isotopic ratios of two olivine grains from the S‐type asteroid Itokawa sampled by the Hayabusa spacecraft. Olivine grains from the Dar al Gani (DaG) 989 LL6 chondrite were used as a reference. Since we analyzed polished thin sections in both cases, we expect the contribution from the solar wind B (rich in 10B) to be minimal because the solar wind was implanted only within very thin layers of the grain surface. The Itokawa and DaG 989 olivine grains have homogeneous B abundances (~400 ppb) and 11B/10B ratios compatible with the terrestrial standard and bulk chondrites. The observed homogeneous B abundances and isotopic ratios of the Itokawa olivine grains are likely the result of thermal metamorphism which occurred in the parent asteroid of Itokawa, which had a similar composition as LL chondrites. The chondritic B isotopic ratios of the Itokawa samples suggest that they contain little cosmogenic B (from cosmic‐ray spallation reactions) rich in 10B. This observation is consistent with the short cosmic‐ray exposure ages of Itokawa samples inferred from the small concentrations of cosmogenic 21Ne. If other Itokawa samples have little cosmogenic B as well, the enrichment in 10B found previously on the surface of another Itokawa particle (as opposed to the bulk grain study here) may be attributed to implanted solar wind B.  相似文献   

9.
We determined the morphologies and dimensions of possible impact craters on the surface of Asteroid 25143 Itokawa from images taken by the Hayabusa spacecraft. Circular depressions, circular features with flat floors or convex floors, and circular features with smooth surfaces were identified as possible craters. The survey identified 38 candidates with widely varying morphologies including rough, smooth and saddle-shaped floors, a lack of raised rims and fresh material exposures. The average depth/diameter ratio was 0.08±0.03: these craters are very shallow relative to craters observed on other asteroids. These shallow craters are a result of (1) target curvature influencing the cratering process, (2) raised rim not being generated by this process, and (3) fines infilling the craters. As many of the crater candidates have an unusual appearance, we used a classification scheme that reflects the likelihood of an observed candidate's formation by a hypervelocity impact. We considered a variety of alternative interpretations while developing this scheme, including inherited features from a proto-Itokawa, spall scars created by the disruption of the proto-Itokawa, spall scars following the formation of a large crater on Itokawa itself, and apparent depressions due to random arrangements of boulders. The size-frequency distribution of the crater candidates was close to the empirical saturation line at the largest diameter, and then decline with decreasing diameter.  相似文献   

10.
Hayabusa‐returned samples offer a unique perspective for understanding the link between asteroids and cosmomaterials available in the laboratory, and provide insights on the early stages of surface space weathering. This study characterizes the mineralogy and the extent of space weathering of the three Itokawa particles RA‐QD02‐0163, RA‐QD02‐0174, and RA‐QD02‐0213 provided by JAXA to our consortium. We report here a series of results based on nondestructive analyses through visible‐near‐infrared reflectance and Raman spectroscopy. Results were obtained on the raw particles, both in their original containers and deposited on diamond windows. Identification of the minerals, characterization of their elemental compositions, and measurements of their relative abundances were led through Raman spectroscopy in punctual and automatic mode. Reflectance spectra in the visible and near‐IR wavelengths constrain the mineralogy of the grains and allow direct comparison with the surface of Itokawa. The spectra reflect the extent of space weathering experienced by the three particles. Particle RA‐QD02‐0163 consists of a heterogeneous mixture of minerals: olivine (Fo76) dominates an assemblage with both Ca‐rich (En50, Wo50) and Ca‐poor (En85) pyroxenes. The elemental compositions of the silicates are consistent with those previously reported for distinct Hayabusa particles. Particles RA‐QD‐0174 and RA‐QD02‐0213 are solely composed of olivine, whose chemical composition is similar to that observed in RA‐QD02‐0163. It has been previously shown that the S‐type asteroid 25143 Itokawa is a breccia of poorly equilibrated LL4 and highly equilibrated LL5 and LL6 materials. The three particles studied here can be related to the least metamorphosed lithology (LL4) based on the high forsterite content of the olivine. Neither carbonaceous matter nor hydrated minerals were detected through Raman on the three allocated particles. The NIR‐VIS reflectance (incidence = 45°, light collection at e = 0°) spectra of the three particles, in particular the 1 μm band, are consistent with the presence of both olivine and pyroxene detected via Raman. The spectra of particles RA‐QD02‐0163 and RA‐QD02‐0213 are also fully compatible with the ground‐based observations of asteroid (25143) Itokawa in terms of both spectral features and slope. By contrast, particle RA‐QD02‐0174 has a similar 1 μm band depth but higher (redder) spectral slope than the surface of Itokawa. This probably reveals a variable extent of space weathering among the regolith particles. RA‐QD02‐0174 may contain a higher amount of nanophase metallic iron and nanophase FeS. Such phases are products by space weathering induced by solar wind, previously detected on other Itokawa particles.  相似文献   

11.
We present results of petrographic, mineralogical, and chemical investigations of three Chelyabinsk meteorite fragments. Three distinct lithologies were identified: light S3 LL5, dark S4–S5 LL5 material, and opaque fine-grained former impact melt. Olivine–spinel thermometry revealed an equilibration temperature of 703 ± 23 °C for the light lithology. All plagioclase seems to be secondary, showing neither shock-induced fractures nor sulfide-metal veinlets. Feldspathic glass can be observed showing features of extensive melting and, in the dark lithology, as maskelynite, lacking melt features and retaining grain boundaries of former plagioclase. Olivine of the dark lithology shows planar deformation features. Impact melt is dominated by Mg-rich olivine and resembles whole-rock melt. Melt veins (<2 mm) are connected to narrower veinlets. Melt vein textures are similar to pegmatite textures showing chilled margins, a zone of inward-grown elongated crystals and central vugs, suggesting crystallization from supercooled melt. Sulfide-metal droplets indicate liquid immiscibility of both silicate and sulfide as well as sulfide and metal melts. Impact melting may have been an important factor for differentiation of primitive planetary bodies. Graphite associated with micrometer-sized melt inclusions in primary olivine was detected by Raman mapping. Carbon isotopic studies of graphite could be applied to test a possible presolar origin.  相似文献   

12.
We observed cross sectional ultra‐thin sections near the surface of 12 particles recovered from the S‐type asteroid Itokawa by the Hayabusa spacecraft in 2010, using spherical aberration–corrected STEM and conventional TEM. Although their mineralogy is almost identical to the equilibrated LL chondrites and therefore basically anhydrous, micrometer‐to‐submicrometer‐sized sylvite was identified on the surface of Itokawa particle RA‐QD02‐0034. Separately, micrometer‐sized halite was also identified on the surface of Itokawa particle RA‐QD02‐0129. Detailed inspection of the sample processing procedures at the JAXA's Planetary Materials Sample Curation Facility and textural observation of the sylvite and halite indicate that they were clearly present on two Itokawa particles before they were removed from Clean Chamber #2 at JAXA. However, there is no direct evidence for their extraterrestrial origin at present. If the sylvite and halite are extraterrestrial, their presence suggests that they may be more abundant on the surface of S‐type asteroids than previously thought.  相似文献   

13.
Three masses of the Chelyabinsk meteorite have been studied with a wide range of analytical techniques to understand the mineralogical variation and thermal history of the Chelyabinsk parent body. The samples exhibit little to no postentry oxidation via Mössbauer and Raman spectroscopy indicating their fresh character, but despite the rapid collection and care of handling some low levels of terrestrial contamination did nonetheless result. Detailed studies show three distinct lithologies, indicative of a genomict breccia. A light‐colored lithology is LL5 material that has experienced thermal metamorphism and subsequent shock at levels near S4. The second lithology is a shock‐darkened LL5 material in which the darkening is caused by melt and metal‐troilite veins along grain boundaries. The third lithology is an impact melt breccia that formed at high temperatures (~1600 °C), and it experienced rapid cooling and degassing of S2 gas. Portions of light and dark lithologies from Chel‐101, and the impact melt breccias (Chel‐102 and Chel‐103) were prepared and analyzed for Rb‐Sr, Sm‐Nd, and Ar‐Ar dating. When combined with results from other studies and chronometers, at least eight impact events (e.g., ~4.53 Ga, ~4.45 Ga, ~3.73 Ga, ~2.81 Ga, ~1.46 Ga, ~852 Ma, ~312 Ma, and ~27 Ma) are clearly identified for Chelyabinsk, indicating a complex history of impacts and heating events. Finally, noble gases yield young cosmic ray exposure ages, near 1 Ma. These young ages, together with the absence of measurable cosmogenic derived Sm and Cr, indicate that Chelyabinsk may have been derived from a recent breakup event on an NEO of LL chondrite composition.  相似文献   

14.
On the basis of observations using Cs‐corrected STEM, we identified three types of surface modification probably formed by space weathering on the surfaces of Itokawa particles. They are (1) redeposition rims (2–3 nm), (2) composite rims (30–60 nm), and (3) composite vesicular rims (60–80 nm). These rims are characterized by a combination of three zones. Zone I occupies the outermost part of the surface modification, which contains elements that are not included in the unchanged substrate minerals, suggesting that this zone is composed of sputter deposits and/or impact vapor deposits originating from the surrounding minerals. Redeposition rims are composed only of Zone I and directly attaches to the unchanged minerals (Zone III). Zone I of composite and composite vesicular rims often contains nanophase (Fe,Mg)S. The composite rims and the composite vesicular rims have a two‐layered structure: a combination of Zone I and Zone II, below which Zone III exists. Zone II is the partially amorphized zone. Zone II of ferromagnesian silicates contains abundant nanophase Fe. Radiation‐induced segregation and in situ reduction are the most plausible mechanisms to form nanophase Fe in Zone II. Their lattice fringes indicate that they contain metallic iron, which probably causes the reddening of the reflectance spectra of Itokawa. Zone II of the composite vesicular rims contains vesicles. The vesicles in Zone II were probably formed by segregation of solar wind He implanted in this zone. The textures strongly suggest that solar wind irradiation damage and implantation are the major causes of surface modification and space weathering on Itokawa.  相似文献   

15.
Abstract— On the night of March 26, 2003, a large meteorite broke up and fell upon the south suburbs of Chicago. The name Park Forest, for the village that is at the center of the strewnfield, has been approved by the nomenclature committee of the Meteoritical Society. Satellite data indicate that the bolide traveled from the southwest toward the northeast. The strewnfield has a southeast‐northwest trend; however, this is probably due to the effects of strong westerly winds at high altitudes. Its very low 56Co and very high 60Co activities indicate that Park Forest had a preatmospheric mass that was at least ～900 kg and could have been as large as ～7 times 103 kg, of which only ～30 kg have been recovered. The average compositions of olivine and low‐Ca pyroxene, Fa24.7 ± 1.1 and Fs20.8 ± 0.7, respectively, and its bulk oxygen isotopic composition, δ18O = +4.68%o, δ17O = +3.44%o, show that Park Forest is an L chondrite. The ferromagnesian minerals are well equilibrated, chondrules are easily recognized, and maskelynite is mostly ≤50 μm across. Based on these observations, we classify Park Forest as type 5. The meteorite has been strongly shocked, and based on the presence of maskelynite, mosaicism and planar deformation features in olivine, undulatory extinction in pyroxene, and glassy veins, the shock stage is S5. The meteorite is a monomict breccia, consisting of light‐colored, angular to rounded clasts in a very dark host. The light and dark lithologies have essentially identical mineral and oxygen isotopic compositions. Their striking difference in appearance is due to the presence of a fine, pervasive network of sulfide veins in the dark lithology, resulting in very short optical path lengths. The dark lithology probably formed from the light lithology in an impact that formed a sulfide‐rich melt and injected it into cracks.  相似文献   

16.
This study presents the petrography, mineralogy, and bulk composition of lunar regolith breccia meteorite Northwest Africa (NWA) 7948. We identify a range of lunar lithologies including basaltic clasts (very low-titanium and low-titanium basalts), feldspathic lithologies (ferroan anorthosite, magnesian-suite rock, and alkali suite), granulites, impact melt breccias (including crystalline impact melt breccias, clast-bearing impact melt breccias, and glassy melt breccias), as well as regolith components (volcanic glass and impact glass). A compositionally unusual metal-rich clast was also identified, which may represent an impact melt lithology sourced from a unique Mg-suite parent rock. NWA 7948 has a mingled bulk rock composition (Al2O3 = 21.6 wt% and FeO = 9.4 wt%) and relatively low concentrations of incompatible trace elements (e.g., Th = 1.07 ppm and Sm = 2.99 ppm) compared with Apollo regolith breccias. Comparing the bulk composition of the meteorite with remotely sensed geochemical data sets suggests that the sample was derived from a region of the lunar surface distal from the nearside Th-rich Procellarum KREEP Terrane. Our investigations suggest that it may have been ejected from a nearside highlands-mare boundary (e.g., around Mare Crisium or Orientale) or a cryptomare region (e.g., Schickard-Schiller or Mare smythii) or a farside highlands-mare boundary (e.g., Mare Australe, Apollo basin in the South Pole–Aitken basin). The distinctive mineralogical and geochemical features of NWA 7948 suggest that the meteorite may represent lunar material that has not been reported before, and indicate that the lunar highlands exhibit wide geological diversity.  相似文献   

17.
Abstract— The ～400 Ma old Ilyinets impact structure was formed in the Precambrian basement of the Ukrainian Shield and is now mostly covered by Quaternary sediments. Various impact breccias and melts are exposed in its southern section. The crater is a complex structure with a central uplift that is surrounded by an annular deposit of breccias and melt rocks. In the annulus, brecciated basement rocks are overlain by up to 80 m of glass-poor suevitic breccia, which is overlain (and partly intercalated) by glass-rich suevite with a thickness of up to 130 m. Impact-melt rocks occur within and on top of the suevites—in some cases in the form of devitrified bomb-shaped impact-glass fragments. We have studied the petrographic and geochemical characteristics of 31, mostly shocked, target rock samples (granites, gneisses, and one amphibolite) obtained from drill cores within the structure, and impact breccias and melt rock samples from drill cores and surface exposures. Multiple sets of planar deformation features (PDFs) are common in quartz, potassium feldspar, and plagioclase of the shocked target rocks. The breccias comprise more or less devitrified impact melt with shocked clasts. The impact-melt rocks (“bombs”) show abundant vesicles and, in some cases, glass is still present as brownish patches and schlieren. All impact breccias (including the melt rocks) are strongly altered and have significantly elevated K contents and lower Na contents than the target rocks. The alteration could have occurred in an impact-induced hydrothermal system. The bomb-shaped melt rocks have lower Mg and Ca contents than other rock types at the crater. Compared to target rocks, only minor enrichments of siderophile element contents (e.g., Ni, Co, Ir) in impact-melt rocks were found.  相似文献   

18.
Abstract— On the basis of detailed field investigations and the study of impact breccias at the Charlevoix impact structure (Québec), a structural analysis is given. This analysis shows that the annular arrangement of both topography and lithology can be applied to subdivide the two craters discussed in this review. Successive rings characterize the central uplift and its collapsed ring graben in the Charlevoix structure. Fault breccias show an annular distribution and indicate diverse directions of movement suggesting progressive readjustment. They formed cohesionless products inside fault planes, named mylolisthenite, and are believed to have acted as lubricants during the modification stage of the formation of the structure: listric readjustment by gravity after the formation of the transient crater. The Sudbury Structure (Ontario) shows fault breccias in a concentric arrangement similar to that of Charlevoix. It may be compared with the Charlevoix structure by applying the same mechanical readjustment model with deep listric faults. The only difference is the amount of the rise structural uplift, that is, the height of central uplift, which is less important in the larger impact structure.  相似文献   

19.
Abstract— –In March 2001, asteroid (25143) Itokawa, the target of the Japanese Hayabusa spacecraft mission, was in a favorable viewing geometry for ground‐based telescopic study. Visible/near‐infrared (VNIR) spectra (～～0.48 to 0.9 μm) obtained on March 24, 26, and 27 UT, and near‐infrared (NIR) spectra (～～0.75 to 2.5 μm) obtained on March 10, 11, 12, 23, and 24 UT collectively show absorption features centered near 1.0 and 2.0 μm, which are indicative of olivine and pyroxene. Analyses of these absorption features indicate an abundance ratio of olivine to pyroxene of approximately 75:25 ± 5, respectively, with no significant variation in the relative abundance of these minerals across its surface on a regional scale. The band center positions indicate that the mean pyroxene chemistry is ～～Wo14 ± 5Fs43 ± 5. There appear to be at least two pyroxene components: primarily a low‐Ca orthopyroxene accompanied by a spectrally significant (～～15–20%) high Fe‐rich pigeonite phase. The mean pyroxene composition is significantly more Fe‐rich than the Fs14–26 range found in ordinary chondrites. These pyroxene compositions are suggestive of phases crystallized from partial melts. This would indicate that the parent body of (25143) Itokawa reached temperatures sufficient to initiate partial melting (～～1050 to 1250 °C), but that it did not attain the degree of melting required for significant melt mobilization and efficient segregation of the basaltic melt component from the unmelted residual olivine portion. Itokawa's spectral band parameters place it near the S(III)/S(IV) boundary, but within the S(III) taxonomic field. In meteoritic nomenclature, Itokawa would be most analogous to an olivine‐rich primitive achondrite. Alternatively, if the high Fs value is not related to partial melting, then Itokawa could also represent a rare atypical LL chondrite, or a previously unsampled oxidized Fe‐rich chondritic‐like assemblage.  相似文献   

20.
D.J. Scheeres  R.W. Gaskell 《Icarus》2008,198(1):125-129
The effect of density inhomogeneity on the YORP effect for a given shape model is investigated. A density inhomogeneity will cause an offset between the center of figure and the center of mass and a re-orientation of the principal axes away from those associated with the shape alone. Both of these effects can alter the predicted YORP rate of change in angular velocity and obliquity. We apply these corrections to the Itokawa shape model and find that its YORP angular velocity rate is sensitive to offsets between its center of mass and center of figure, with a shift on the order of 15 m being able to change the sign of the YORP effect for that asteroid. Given the non-detection of YORP for Itokawa as of 2008, this can shed light on the density distribution within that body. The theory supports a shift of the asteroid center of mass towards Itokawa's neck region, where there is an accumulation of finer gravels, or towards the asteroid's “Head” region. Detection of the YORP effect for Itokawa should provide some strong constraints on its density distribution. This theory could also be applied to asteroids visited by future spacecraft to constrain density inhomogeneities.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号