共查询到20条相似文献，搜索用时 15 毫秒
1.
Hua Zhang Su Diao Wei Chen Guangnan Huang Hongxing Li Min Bai 《Geophysical Prospecting》2019,67(5):1201-1218
Seismic data reconstruction, as a preconditioning process, is critical to the performance of subsequent data and imaging processing tasks. Often, seismic data are sparsely and non-uniformly sampled due to limitations of economic costs and field conditions. However, most reconstruction processing algorithms are designed for the ideal case of uniformly sampled data. In this paper, we propose the non-equispaced fast discrete curvelet transform-based three-dimensional reconstruction method that can handle and interpolate non-uniformly sampled data effectively along two spatial coordinates. In the procedure, the three-dimensional seismic data sets are organized in a sequence of two-dimensional time slices along the source–receiver domain. By introducing the two-dimensional non-equispaced fast Fourier transform in the conventional fast discrete curvelet transform, we formulate an L1 sparsity regularized problem to invert for the uniformly sampled curvelet coefficients from the non-uniformly sampled data. In order to improve the inversion algorithm efficiency, we employ the linearized Bregman method to solve the L1-norm minimization problem. Once the uniform curvelet coefficients are obtained, uniformly sampled three-dimensional seismic data can be reconstructed via the conventional inverse curvelet transform. The reconstructed results using both synthetic and real data demonstrate that the proposed method can reconstruct not only non-uniformly sampled and aliased data with missing traces, but also the subset of observed data on a non-uniform grid to a specified uniform grid along two spatial coordinates. Also, the results show that the simple linearized Bregman method is superior to the complex spectral projected gradient for L1 norm method in terms of reconstruction accuracy. 相似文献
2.
Conventional frequency domain singular value decomposition (SVD) filtering method used in random noise attenuation processing causes bending event damage. To mitigate this problem, we present a mixed Cadzow filtering method based on fractional Fourier transform to suppress random noise in 3D seismic data. First, the seismic data is transformed to the time-frequency plane via the fractional Fourier transform. Second, based on the Eigenimage filtering method and Cadzow filtering method, the mixed high-dimensional Hankel matrix is built; then, SVD is performed. Finally, random noise is eliminated effectively by reducing the rank of the matrix. The theoretical model and real applications of the mixed filtering method in a region of Sichuan show that our method can not only suppress noise effectively but also preserve the frequency and phase of effective signals quite well and significantly improve the signal-to-noise ratio of 3D post-stack seismic data. 相似文献
3.
在野外数据采集过程中,空间非均匀采样下的地震道缺失现象经常出现,为了不影响后续资料处理,必须进行高精度数据重建.然而大多数常规方法只能对空间均匀采样下的地震缺失道进行重建,而对于非均匀采样的地震数据则无能为力.为此本文在以往多尺度多方向二维曲波变换的基础上,首先引入非均匀快速傅里叶变换,建立均匀曲波系数与空间非均匀采样下地震缺失道数据之间的规则化反演算子,在L1最小范数约束下,使用线性Bregman方法进行反演计算得到均匀曲波系数,最后再进行均匀快速离散曲波反变换,从而形成基于非均匀曲波变换的高精度地震数据重建方法.该方法不仅可以重建非均匀带假频的缺失数据,而且具有较强的抗噪声能力,同时也可以将非均匀网格数据归为到任意指定的均匀采样网格.理论与实际数据的处理表明了该方法重建效果远优于非均匀傅里叶变换方法,可以有效地指导复杂地区数据采集设计及重建. 相似文献
4.
基于POCS方法指数阈值模型的不规则地震数据重建(英文) 总被引：8，自引：3，他引：5
不规则地震数据会对地震多道处理技术的正确运行造成不良影响,降低地震资料的处理质量。本文将广泛用于图形图像重建的凸集投影方法应用到地震数据重建领域,实现规则样不规则道缺失数据的插值重建。对于整道缺失地震数据,将POCS迭代重建过程由时间域转移到频率域实现,避免每次迭代都对时间做正反Fourier变换,节约了计算量。在迭代过程中,阈值参数的选择方式对重建效率有重要影响。本文设计了两种阈值集合模型进行重建试验,试验结果表明:在相同重建效果下,指数型阈值集合模型可以有效减少迭代次数,提高重建效率。此外,分析了POCS重建方法的抗噪性能和抗假频性能。最后,理论模型和实际资料处理效果验证了本文重建方法的正确性和有效性。 相似文献
5.
Data interpolation is an important step for seismic data analysis because many processing tasks, such as multiple attenuation and migration, are based on regularly sampled seismic data. Failed interpolations may introduce artifacts and eventually lead to inaccurate final processing results. In this paper, we generalised seismic data interpolation as a basis pursuit problem and proposed an iteration framework for recovering missing data. The method is based on non‐linear iteration and sparse transform. A modified Bregman iteration is used for solving the constrained minimisation problem based on compressed sensing. The new iterative strategy guarantees fast convergence by using a fixed threshold value. We also propose a generalised velocity‐dependent formulation of the seislet transform as an effective sparse transform, in which the non‐hyperbolic normal moveout equation serves as a bridge between local slope patterns and moveout parametres in the common‐midpoint domain. It can also be reduced to the traditional velocity‐dependent seislet if special heterogeneity parametre is selected. The generalised velocity‐dependent seislet transform predicts prestack reflection data in offset coordinates, which provides a high compression of reflection events. The method was applied to synthetic and field data examples, and the results show that the generalised velocity‐dependent seislet transform can reconstruct missing data with the help of the modified Bregman iteration even for non‐hyperbolic reflections under complex conditions, such as vertical transverse isotropic (VTI) media or aliasing. 相似文献
6.
V. BARDAN 《Geophysical Prospecting》1987,35(4):343-358
Trace interpolation of spatially aliased seismic data is used to improve the quality of multi-trace processing, especially that of migration. We consider non-rectangular sampling lattices. After stating the real sampling requirements for (two-dimensional or 3-D) digitized signals, the paper explains geometrically the effect of migration and of the 2-D dip filtering upon the aliased events, as well as our ability to interpolate traces from undersampled seismic data. 相似文献
7.
Based on the fact that the Hankel matrix representing clean seismic data is low rank, low-rank approximation methods have been widely utilized for removing noise from seismic data. A common strategy for real seismic data is to perform the low-rank approximations for small local windows where the events can be approximately viewed as linear. This raises a fundamental question of selecting an optimal rank that best captures the number of events for each local window. Gavish and Donoho proposed a method to select the rank when the noise is independent and identically distributed. Gaussian matrix by analysing the statistical performance of the singular values of the Gaussian matrices. However, such statistical performance is not available for noisy Hankel matrices. In this paper, we adopt the same strategy and propose a rule that computes the number of singular values exceed the median singular value by a multiplicative factor. We suggest a multiplicative factor of 3 based on simulations which mimic the theories underlying Gavish and Donoho in the independent and identically distributed Gaussian setting. The proposed optimal rank selection rule can be incorporated into the classical low-rank approximation method and many other recently developed methods such as those by shrinking the singular values. The low-rank approximation methods with optimally selected rank rule can automatically suppress most of the noise while preserving the main features of the seismic data in each window. Experiments on both synthetic and field seismic data demonstrate the superior performance of the proposed rank selection rule for seismic data denoising. 相似文献
8.
基于最小平方的Fourier地震数据重建方法最终转化为求解一个线性方程组, 其系数矩阵是Toeplitz矩阵,可以用共轭梯度法求解该线性方程组.共轭梯度法的迭代次数受系数矩阵病态程度的影响,地震数据的非规则采样程度越高,所形成的系数矩阵病态程度越高,就越难收敛和得到合理的计算结果.本文研究了基于Toeplitz矩阵的不同预条件的构造方法,以及对共轭梯度法收敛性的影响.通过预条件的使用,加快了共轭梯度法的迭代速度, 改进了共轭梯度算法的收敛性,提高了计算的效率.数值算例和实际地震数据重建试验证明了预条件共轭梯度法对计算效率有很大的提高. 相似文献
9.
10.
人工地震方法由于受到野外观测系统和经济因素等的限制,采集的数据在空间方向总是不规则分布.但是,许多地震数据处理技术的应用（如：多次波衰减,偏移和时移地震）都基于空间规则分布条件下的地震数据体.因此,数据插值技术是地震数据处理流程中关键环节之一.失败的插值方法往往会引入虚假信息,给后续处理环节带来严重的影响.迭代插值方法是目前广泛应用的地震数据重建思路,但是常规的迭代插值方法往往很难保证插值精度,并且迭代收敛速度较慢,尤其存在随机噪声的情况下,插值地震道与原始地震道之间存在较大的信噪比差异.因此开发快速的、有效的迭代数据插值方法具有重要的工业价值.本文将地震数据插值归纳为数学基追踪问题,在压缩感知理论框架下,提出新的非线性Bregman整形迭代算法来求解约束最小化问题,同时在迭代过程中提出两种匹配的迭代控制准则,通过有效的稀疏变换对缺失数据进行重建.通过理论模型和实际数据测试本文方法,并且与常规迭代插值算法进行比较,结果表明Bregman整形迭代插值方法能够更加有效地恢复含有随机噪声的缺失地震信息. 相似文献
11.
A new seismic interpolation and denoising method with a curvelet transform matching filter, employing the fast iterative shrinkage thresholding algorithm (FISTA), is proposed. The approach treats the matching filter, seismic interpolation, and denoising all as the same inverse problem using an inversion iteration algorithm. The curvelet transform has a high sparseness and is useful for separating signal from noise, meaning that it can accurately solve the matching problem using FISTA. When applying the new method to a synthetic noisy data sets and a data sets with missing traces, the optimum matching result is obtained, noise is greatly suppressed, missing seismic data are filled by interpolation, and the waveform is highly consistent. We then verified the method by applying it to real data, yielding satisfactory results. The results show that the method can reconstruct missing traces in the case of low SNR (signal-to-noise ratio). The above three problems can be simultaneously solved via FISTA algorithm, and it will not only increase the processing efficiency but also improve SNR of the seismic data. 相似文献
12.
Navid Hosseini 《Journal of Seismology》2017,21(5):1101-1110
Rockburst is a typical dynamic disaster in underground coal mines which its occurrences relate to the mechanical quality of coal seam and surrounding rock mass and also the condition of stress distribution. The main aim of this paper is to study the potential of rockburst in a longwall coal mine by using of passive seismic velocity tomography and image subtraction technique. For this purpose, first by mounting an array of receivers on the surface above the active panel, the mining-induced seismic data as a passive source for several continuous days were recorded. Then, the three-dimensional tomograms using simultaneous iteration reconstruction technique (SIRT) for each day are created and by employing the velocity filtering, the overstressed zones are detected. In addition, the two-dimensional seismic velocity tomograms in coal seam level by slicing the three-dimensional tomograms are obtained. Then the state of stress changes in successive days by applying the image subtraction technique on these two-dimensional tomograms is considered. The results show that the compilation of filtered three-dimensional tomograms and subtracted images is an appropriate approach for detecting the overstressed zones around the panel and subsequent evaluation of rockburst potential. The research conclusion proves that the applied approach in this study in combination with field observations of rock mass status can effectively identify the rockburst-prone areas during the mining operation and help to improve the safety condition. 相似文献
13.
Seismic field data are often irregularly or coarsely sampled in space due to acquisition limits. However, complete and regular data need to be acquired in most conventional seismic processing and imaging algorithms. We have developed a fast joint curvelet‐domain seismic data reconstruction method by sparsity‐promoting inversion based on compressive sensing. We have made an attempt to seek a sparse representation of incomplete seismic data by curvelet coefficients and solve sparsity‐promoting problems through an iterative thresholding process to reconstruct the missing data. In conventional iterative thresholding algorithms, the updated reconstruction result of each iteration is obtained by adding the gradient to the previous result and thresholding it. The algorithm is stable and accurate but always requires sufficient iterations. The linearised Bregman method can accelerate the convergence by replacing the previous result with that before thresholding, thus promoting the effective coefficients added to the result. The method is faster than conventional one, but it can cause artefacts near the missing traces while reconstructing small‐amplitude coefficients because some coefficients in the unthresholded results wrongly represent the residual of the data. The key process in the joint curvelet‐domain reconstruction method is that we use both the previous results of the conventional method and the linearised Bregman method to stabilise the reconstruction quality and accelerate the recovery for a while. The acceleration rate is controlled through weighting to adjust the contribution of the acceleration term and the stable term. A fierce acceleration could be performed for the recovery of comparatively small gaps, whereas a mild acceleration is more appropriate when the incomplete data has a large gap of high‐amplitude events. Finally, we carry out a fast and stable recovery using the trade‐off algorithm. Synthetic and field data tests verified that the joint curvelet‐domain reconstruction method can effectively and quickly reconstruct seismic data with missing traces. 相似文献
14.
Autoregressive modeling is used to estimate the spectrum of aliased data. A region of spectral support is determined by identifying the location of peaks in the estimated spatial spectrum of the data. This information is used to pose a Fourier reconstruction problem that inverts for a few dominant wavenumbers that are required to model the data. Synthetic and real data examples are used to illustrate the method. In particular, we show that the proposed method can accurately reconstruct aliased data and data with gaps. 相似文献
15.
Recovering accurate data is important for both earthquake and exploration seismology studies, when data are sparsely sampled or partially missing. We present a method that allows for precise and accurate recovery of seismic data using a localized fractal recovery method. This method requires that the data are selfsimilar on local and global spatial scales. We present examples that show that the intrinsic structure associated with seismic data can be easily and accurately recovered by using this approach. This result, in turn, indicates that seismic data are indeed self-similar on local and global scales. This method is applicable not only for seismic studies, but also for any field studies that require accurate recovery of data from sparsely sampled datasets with partially missing data. Our ability to recover the missing data with high fidelity and accuracy will qualitatively improve the images of seismic tomography. 相似文献
16.
基于Bregman迭代的复杂地震波场稀疏域插值方法 总被引：2，自引：1，他引：1
在地震勘探中,野外施工条件等因素使观测系统很难记录到完整的地震波场,因此,资料处理中的地震数据插值是一个重要的问题。尤其在复杂构造条件下,缺失的叠前地震数据给后续高精度处理带来严重的影响。压缩感知理论源于解决图像采集问题,主要包含信号的稀疏表征以及数学组合优化问题的求解,它为地震数据插值问题的求解提供了有效的解决方案。在应用压缩感知求解复杂地震波场的插值问题中,如何最佳化表征复杂地震波场以及快速准确的迭代算法是该理论应用的关键问题。Seislet变换是一个特殊针对地震波场表征的稀疏多尺度变换,该方法能有效地压缩地震波同相轴。同时,Bregman迭代算法在以稀疏表征为核心的压缩感知理论中,是一种有效的求解算法,通过选取适当的阈值参数,能够开发地震波动力学预测理论、图像处理变换方法和压缩感知反演算法相结合的地震数据插值方法。本文将地震数据插值问题纳入约束最优化问题,选取能够有效压缩复杂地震波场的OC-seislet稀疏变换,应用Bregman迭代方法求解压缩感知理论框架下的混合范数反问题,提出了Bregman迭代方法中固定阈值选取的H曲线方法,实现地震波场的快速、准确重建。理论模型和实际数据的处理结果验证了基于H曲线准则的Bregman迭代稀疏域插值方法可以有效地恢复复杂波场的缺失信息。 相似文献
17.
针对利用地震道进行相对波阻抗反演中遇到的横向连续性难以保持、初始子波容错度差以及随机噪声干扰影响反演结果等问题,提出了一种基于矩阵Toeplitz稀疏分解的相对波阻抗反演方法.该方法将地震数据剖面的Toeplitz稀疏分解问题分解为两个子反演问题,其一以Toeplitz子波矩阵元素为待反演的参数,用Fused Lasso方法求解,可保证子波具有紧支集且是光滑的;其二以稀疏反射系数矩阵元素为待反演参数,用基于回溯的快速萎缩阈值迭代算法求解,大大降低了目标函数中参数选择的难度.通过交替迭代求解上述两个子反演问题可将地震数据剖面因式分解为一个Toeplitz子波矩阵和一个稀疏反射系数矩阵;然后由反射系数矩阵递推反演可以得到高分辨率的相对波阻抗剖面;利用测井资料加入低频分量后,也可得到高分辨率的绝对波阻抗剖面.Marmousi2模型生成的合成记录算例和实际地震资料算例均表明:本文方法可以从带限地震数据中有效地反演相对波阻抗,反演结果分辨率高并且能够很好地保持地震数据的横向连续性;即使在初始估计子波存在误差和地震数据被随机噪声污染的情况下也能取得较好的效果. 相似文献
18.
本文提出解调包络方法来重构地震记录中缺失的低频信号,同时该方法能够降低全波形反演的非线性程度;提出伴随状态震源函数反演方法来得到精确的震源函数,并推导了梯度计算公式;解调包络方法结合低通滤波技术,实现了从低频到高频的多尺度反演策略,有效缓解了全波形反演的周波跳跃问题.数值算例证明了解调包络、伴随状态震源函数反演方法和低通滤波多尺度反演策略的可行性及优越性.震源函数反演精度测试结果表明:即使观测记录在缺失低频信息的情况下,也能反演得到精确的震源函数.缺失低频测试和抗噪能力测试结果表明:即使地震数据中缺失9Hz以下的低频信号或者信噪比极低的情况下,利用反演得到的精确震源函数进行解调包络多尺度全波形反演,同样可以得到高精度的全波形反演结果.与Hilbert包络全波形反演对比结果表明:解调包络在重构低频和降低伴随震源主频方面具有一定优势. 相似文献
19.
We have developed a novel method for missing seismic data interpolation using f‐x‐domain regularised nonstationary autoregression. f‐x regularised nonstationary autoregression interpolation can deal with the events that have space‐varying dips. We assume that the coefficients of f‐x regularised nonstationary autoregression are smoothly varying along the space axis. This method includes two steps: the estimation of the coefficients and the interpolation of missing traces using estimated coefficients. We estimate the f‐x regularised nonstationary autoregression coefficients for the completed data using weighted nonstationary autoregression equations with smoothing constraints. For regularly missing data, similar to Spitz f‐x interpolation, we use autoregression coefficients estimated from low‐frequency components without aliasing to obtain autoregression coefficients of high‐frequency components with aliasing. For irregularly missing or gapped data, we use known traces to establish nonstationary autoregression equations with regularisation to estimate the f‐x autoregression coefficients of the complete data. We implement the algorithm by iterated scheme using a frequency‐domain conjugate gradient method with shaping regularisation. The proposed method improves the calculation efficiency by applying shaping regularisation and implementation in the frequency domain. The applicability and effectiveness of the proposed method are examined by synthetic and field data examples. 相似文献
20.
Alexander Druzhinin 《Geophysical Prospecting》1999,47(5):757-783
Non-aliased integral (Kirchhoff-type) transformations for forward and downward wavefield extrapolations in inhomogeneous media with interfaces are described. Special weights are computed to compensate for operator aliasing and finite-aperture effects, even when the data are spatially aliased and irregularly sampled. Basic components of the algorithm, such as Green's function computation, can be replaced by alternative solutions in conjunction with ray-tracing methods. Applications of this algorithm to model and real data in both two and three dimensions are discussed in terms of its impact on seismic modelling, multiple prediction and prestack imaging. 相似文献