共查询到20条相似文献，搜索用时 477 毫秒
1.
Three different series of experiments were carried out with pitch (bitumen) and/or composite pitch-plasticine models to observe the spatial and temporal changes of strain pattern and/or fold styles in a tectonic zone undergoing sinistral-sense unconfined transpression. In the first series, rectangular pitch models with circular strain markers, when subjected to vertically and laterally unconstrained transpression, showed that the circular markers deformed into ellipses with long axes (maximum instantaneous stretching axis: ISAmax) oriented <45° with the plane of simple shear at the onset of deformation. This initial angle decreased with increasing angle of convergence (α = 15°, 30°, 45° and 60°) between the boundary walls. In the second series, a longitudinally pre-cut pitch block simulated a pre-existing fault zone in the crust. Lubrication along the cut was varied to simulate varying ease of fault slip. During oblique convergence, transpressional strain was partitioned between the pre-existing cut (dominantly the simple shear component) and the pitch blocks (mostly the pure shear component). Partitioning was higher for higher lubrication and lower angle of convergence in these experiments, which envisaged interesting observations on the efficiency of natural ‘partitioned transpression’ systems. In series 3, folds in a thin plasticine layer placed over the pitch block initiated parallel to the long axis of the finite strain ellipse in transpression and rotated anticlockwise with increasing strain. 相似文献
2.
Transpressional deformation has played an important role in the late Neoproterozoic evolution of the ArabianNubian Shield including the Central Eastern Desert of Egypt. The Ghadir Shear Belt is a 35 km-long, NW-oriented brittleductile shear zone that underwent overall sinistral transpression during the Late Neoproterozoic. Within this shear belt, strain is highly partitioned into shortening, oblique, extensional and strike-slip structures at multiple scales. Moreover, strain partitioning is heterogeneous along-strike giving rise to three distinct structural domains. In the East Ghadir and Ambaut shear belts, the strain is pure-shear dominated whereas the narrow sectors parallel to the shear walls in the West Ghadir Shear Zone are simple-shear dominated. These domains are comparable to splay-dominated and thrust-dominated strike-slip shear zones. The kinematic transition along the Ghadir shear belt is consistent with separate strike-slip and thrustsense shear zones. The earlier fabric(S1), is locally recognized in low strain areas and SW-ward thrusts. S2 is associated with a shallowly plunging stretching lineation(L2), and defines ～NW-SE major upright macroscopic folds in the East Ghadir shear belt. F2 folds are superimposed by ～NNW–SSE tight-minor and major F3 folds that are kinematically compatible with sinistral transpressional deformation along the West Ghadir Shear Zone and may represent strain partitioning during deformation. F2 and F3 folds are superimposed by ENE–WSW gentle F4 folds in the Ambaut shear belt. The sub-parallelism of F3 and F4 fold axes with the shear zones may have resulted from strain partitioning associated with simple shear deformation along narrow mylonite zones and pure shear-dominant deformation in fold zones. Dextral ENEstriking shear zones were subsequently active at ca. 595 Ma, coeval with sinistral shearing along NW-to NNW-striking shear zones. The occurrence of upright folds and folds with vertical axes suggests that transpression plays a significant role in the tectonic evolution of the Ghadir shear belt. Oblique convergence may have been provoked by the buckling of the Hafafit gneiss-cored domes and relative rotations between its segments. Upright folds, fold with vertical axes and sinistral strike-slip shear zones developed in response to strain partitioning. The West Ghadir Shear Zone contains thrusts and strikeslip shear zones that resulted from lateral escape tectonics associated with lateral imbrication and transpression in response to oblique squeezing of the Arabian-Nubian Shield during agglutination of East and West Gondwana. 相似文献
3.
《Journal of African Earth Sciences》2010,57(4-5):167-178
Deformed conglomeratic clasts exposed along the Neoproterozoic Nakasib Suture and the Oko Shear Zone are used to calculate three-dimensional (3D) tectonic strain associated with the latter to quantify strain associated with post-accretionary deformational belts in the Arabian–Nubian Shield. The Nakasib Suture is a NE-trending fold and thrust belt that is sinistrally offset (∼10 km) by the cross-cutting NNW- to NW-trending strike-slip faults of the Oko Shear Zone. The Nakasib Suture was formed as a result of collision between the Haya terrane and the Gebeit terrane at ∼750 Ma ago. The Oko Shear Zone was subsequently formed as a result of an E–W directed shortening of the Arabian–Nubian Shield due to collision between East and West Gondwana at ∼670–610 Ma ago. This analysis indicates the following: (1) The Nakasib Suture is dominated by flattening strain with the flattening plane of the associated strain ellipsoid oriented at 21°/77°SE. This flattening deformation is interpreted to be associated with nappe emplacement from north to south. (2) Some regions along the Nakasib Suture are characterized by constriction strain that might be due to refolding of the early nappes about NE-trending axes. (3) The Oko Shear Zone is characterized by constriction strain, with the XY plane of the strain ellipsoid oriented at 171°/68°E. The strain ellipsoid associated with the Oko Shear Zone manifests superimposition of E–W shortening on the NE-trending fold and thrust belt associated with the Nakasib Suture. (4) The tectonic strain of the Oko Shear Zone, superimposed over the structures of the Nakasib Suture, is characterized by a strain ellipsoid whose flattening plane is oriented at 21°/49°W. The strain ellipsoid of the tectonic strain has a major axis with a quadratic elongation of 3.6 and an orientation of 357°/25°, an intermediate axis with a quadratic elongation of 1.2 and an orientation of 231°/30°, and a minor axis with a quadratic elongation of 0.25 and an orientation of 115°/18°. This suggests that the post-accretionary deformation of the Arabian–Nubian Shield was superimposed as a NW–SE directed shortening that created early N–S shortening zones and late NW-trending sinistral strike-slip faults. 相似文献
4.
Mubarak shear belt provides an opportunity to investigate quantitative finite strain (Rs), proportions of pure shear and simple shear components, sense of shear indicators, subhorizontal to steeply plunging mineral lineations, in a dextral transpressional zone. The structural style of the Mubarak shear belt is consistent with dextral transpression within the Central Eastern Desert where dextral and reverse shear have developed simultaneously with the regional foliation. The high strain zone of the Mubarak shear belt is characterized by steeply dipping foliation with sub-horizontal stretching lineation (simple shear) surrounded by thrust imbrications with slightly plunging stretching lineations. Strain estimates from the Mubarak shear belt are used to determine how pure and simple shear components of deformation are partitioned. The axial ratios in XZ sections range from 1.16 to 2.33 with the maximum stretch, S X , ranges from 1.06 to 1.48. The minimum stretch, S Z , ranges from 0.65 to 0.92 indicating a moderate variation in vertical shortening. Volcaniclastic metasediments and metagabbros were subjected to prograde low-grade regional metamorphism in the range of greenschist to lower amphibolite facies (450–650°C at 2–4 kbar). Medium pressure (6–8 kbar at 530°C) was estimated from the high strain zone within the dextral strike-slip shear zones. Retrograde metamorphism occurred at a temperature range of 250–280°C. There is a trend towards decreasing the ratio of 100Mg/(Mg + Fetot + Mn) away from the high strain zone of the Mubarak shear belt. Integrated strain and temperature estimates indicate that the simple shear (non-coaxial) components of deformation played a significant role in formation and exhumation of the Mubarak shear belt during the accumulation of finite strain and consequently during progressive transpression and thrusting. 相似文献
5.
Neoproterozoic rocks, Oligocene to Neogene sediments and Tertiary Red Sea rift-related volcanics (Harrat) are three dominant major groups exposed in the Jeddah tectonic terrane in Western Arabia. The basement complex comprises amphibolites, schists, and older and younger granites unconformably overlain by a post-amalgamation volcanosedimentary sequence (Fatima Group) exhibiting post-accretionary thrusting and thrust-related structures. The older granites and/or the amphibolites and schists display mylonitization and shearing in some outcrops, and the observed kinematic indicators indicate dextral monoclinic symmetry along the impressive Wadi Fatima Shear Zone. Finite strain analysis of the mylonitized lithologies is used to interpret the deformation history of the Wadi Fatima Shear Zone. The measured finite strain data demonstrate that the amphibolites, schists, and older granites are mildly to moderately deformed, where XZ (axial ratios in XZ direction) vary from 2.76 to 4.22 and from 2.04 to 3.90 for the Rf/φ and Fry method respectively. The shortening axes (Z) have subvertical attitude and are associated with subhorizontal foliation. The data show oblate strain ellipsoids in the different rocks in the studied area and indication bulk flattening strain. We assume that the different rock types have similar deformation behavior. In the deformed granite, the strain data are identical in magnitude with those obtained in the Fatima Group volcanosedimentary sequence. Finite strain accumulated without any significant volume change contemporaneously with syn-accretionary transpressive structures. It is concluded that a simple-shear deformation with constant-volume plane strain exists, where displacement is strictly parallel to the shear plane. Furthermore, the contacts between various lithological units in the Wadi Fatima Shear Zone were formed under brittle to semi-ductile deformation conditions. 相似文献
6.
Lineations within mylonites exhumed in the hanging wall of New Zealand's active Alpine Fault zone have a complicated relationship to contemporary plate kinematics. The shear zone is triclinic and macroscopic object lineations are not usually parallel to the simple shear direction, despite high total simple shear strains (γ ≥ 150). This is mostly because the lineations are inherited from pre-mylonitic fabrics, and have not been rotated into parallelism with the mylonitic stretching direction (which pitches c. 44° in the fault plane). Furthermore, some lineations have been variably rotated depending on whether they are present in shear bands or microlithons, which accommodated bulk strains with different vorticities. Total strains required to obtain parallelism between the finite maximum principal stretching direction calculated from transpression models and these mylonitic lineations, are pure shear stretch, S1 ∼ 3.5; simple shear 11.7 < γ < 150. The observations and numerical models also show that linear features are not rotated much during simple shear because they initially lie within the shear plane, and that inherited fabric components may not be destroyed until very high simple shear strains have been attained. 相似文献
7.
Transpressional deformation has played an important role in the late Paleozoic evolution of the western Central Asian Orogenic Belt (CAOB), and understanding the structural evolution of such transpressional zones is crucial for tectonic reconstructions. Here we focus on the transpressional Irtysh Shear Zone with an aim at understanding amalgamation processes between the Chinese Altai and the West/East Junggar. We mapped macroscopic fold structures in the southern Chinese Altai and analyzed their relationships with the development of the adjacent Irtysh Shear Zone. Structural observations from these macroscopic folds show evidence for four generations of folding and associated fabrics. The earlier fabric (S1), is locally recognized in low strain areas, and is commonly isoclinally folded by F2 folds that have an axial plane orientation parallel to the dominant fabric (S2). S2 is associated with a shallowly plunging stretching lineation (L2), and defines ∼NW-SE tight-close upright macroscopic folds (F3) with the doubly plunging geometry. F3 folds are superimposed by ∼NNW-SSE gentle F4 folds. The F3 and F4 folds are kinematically compatible with sinistral transpressional deformation along the Irtysh Shear Zone and may represent strain partitioning during deformation. The sub-parallelism of F3 fold axis with the Irtysh Shear Zone may have resulted from strain partitioning associated with simple shear deformation along narrow mylonite zones and pure shear-dominant deformation (F3) in fold zones. The strain partitioning may have become less efficient in the later stage of transpressional deformation, so that a fraction of transcurrent components was partitioned into F4 folds. 相似文献
8.
The stress conditions of the ductile-to-brittle regime have been assessed along the Asuke Shear Zone (ASZ), which strikes NE–SW in the Cretaceous Ryoke granite terrain in SW Japan. Along the ASZ, pseudotachylyte and mylonitized pseudotachylyte are locally developed together with cataclasite. The simultaneous operation of dislocation creep and grain-size-sensitive creep, as indicated by the coexistence of the Z-maximum and relatively random c-axis lattice preferred orientations as well as the sizes of dynamically recrystallized quartz grains (6.40–7.79 μm) in the mylonitized pseudotachylyte, suggest differential stresses of 110–130 MPa at ∼300 °C. The e-twin morphology, twinning ratio, and distribution of the glide direction on the e-twin plane of the twinned calcite in the amygdules of the pseudotachylyte suggest the stress conditions of the σ1 and σ3 axes trend 228° and 320° and plunge 55° and 1°, respectively, and indicate differential stresses of 40–80 MPa at 150–200 °C. Based on kinematic indicators in the fault rocks, the stress conditions estimated from calcite twins, and the cooling history of the granitic protolith, the ASZ is inferred to have been activated under a stress state that caused sinistral normal movements before and after pseudotachylyte formation at 70–50 Ma. 相似文献
9.
Mesoscopic structures in anchimetamorphic (T = 200–300°C) strata of the Pulaski thrust sheet, Southern Appalachian thrust belt, developed in progressive, heterogeneous simple shear near the ductile-to-brittle transition. Shear (γ≤3) was localized in weak, anisotropic pelitic rocks (Rome Formation) along the base of this 5–11 km thick thrust sheet. Folds, which vary from upright and open to isoclinal and NW-facing, developed during ductile shearing and display a correlation between tightness and axial-surface dip. Movement along brecciated thrust zones, which evolved progressively from zones of greatest ductile strain, resulted in low-angle truncation of fold axis trends, coaxial refolding of earlier structures, and imbrication of the thrust sheet.Transient variations in fluid pressure (Pf) controlled the mechanical behavior of the thrust sheet. Systematic veins imply Pf >σ3 + T (T = tensile strength) during ductile deformation, whereas later non-systematic vein arrays in high strain zones record periods of nearly hydrostatic stress. Elevated Pf, which led to fracturing, dilation, and fault initiation, appears confined to pelitic zones within the Rome Formation. This, coupled with decreasing temperature, resulted in the transition from ductile folding to brittle thrusting. Changing physical conditions probably reflect erosional unroofing during uplift and late Paleozoic thrust sheet emplacement. 相似文献
10.
《Journal of Structural Geology》1999,21(8-9):939-948
Strains in rocks can be observed but ancient stresses can only be inferred. We should re-examine the potential of strain geometry as the key to understanding and interpreting common shear structures ranging from faults to plastic shear zones. The concept of failure along zero extension directions can be applied to natural structures in rocks and is predicated on strain compatibility between differently strained volumes. Zero extension directions are considered for two strain configurations, plane strain (k=1) and uniaxial shortening (k=0). The crucial difference between shear fractures, or faults, and plastic yield zones is that the former are preceded by dilatation while the latter are isovolumetric. Volume changes during deformation affect the orientations of zero extension directions and hence of the resulting structures. With isovolumetric strain, yield occurs on planes at 45° to the principal shortening direction in plane strain and at 54.7° to this axis in uniaxial shortening. Uniaxial shortening experiments on rock samples allow estimation of the relative volumetric strains when yield zones initiate. When this volumetric strain is used to estimate the orientation of shear fractures in plane strain, ca 70° dips are predicted for normal faults at high crustal levels, decreasing downwards to 45°. 相似文献
11.
Quartz c-axis fabrics are widely used to determine the shear plane in ductile shear zones, based upon an assumption that the shear plane is perpendicular to both the central segment of quartz c-axis crossed girdle and single girdle. In this paper the development of quartz c-axis fabric under simple-pure shear deformation is simulated using the visco-plastic self-consistent (VPSC) model so as to re-examine this assumption. In the case of no or weak dynamic recrystallization, the simulated crossed girdles have a central segment perpendicular or nearly perpendicular to the maximum principal finite strain direction (X) and the XY finite strain plane, and at a variable angle relative to the imposed kinematic framework that is dependent on the modeled flow vorticity and finite strain. These crossed girdles have a symmetrical skeleton with respect to the finite strain axes, regardless of the bulk strain and the kinematic vorticity, and rotate in a way similar to the shear sense with increasing bulk strain ratio. The larger the vorticity number the more asymmetrical their legs tend to be. In the case of strong dynamic recrystallization and large bulk strain, under simple shear the crossed girdle switches into single girdles, sub-perpendicular to the shear plane, by losing the weak legs. The numerical results in our models do not confirm the above-mentioned assumption. 相似文献
12.
F. Wagner H. -R. Wenk H. Kern P. Van Houtte C. Esling 《Contributions to Mineralogy and Petrology》1982,80(2):132-139
Carbonate rocks deform preferentially by twin gliding on e={01ˉ18} and slip on r ={10ˉ14} and f={02ˉ21}. In polycrystalline aggregates strong textures develop. We report on experimentally produced textures in triaxial
plane strain geometry with orthorhombic symmetry at 200° C and 400° C. Pole figure of the experimentally deformed specimens
are compared quantitatively with theoretical simulations based on the Taylor theory using both slip and mechanical twinning
as mechanisms. Agreement at low and high temperature is satisfactory and documents that models developed for f.c.c. metals
can be applied to low symmetry minerals provided that deformation mechanisms are known and that mechanical twinning is properly
accounted for. Comparison with experimental results indicates that strain was nearly homogeneous at the conditions considered
and the same may apply to many geological textures. Three texture types are described which are differentiated mainly by the
relative importance of e twinning. 相似文献
13.
Tailings composition effects on shear strength behavior of co-mixed mine waste rock and tailings 总被引：1，自引：0，他引：1
The objective of this study was to evaluate the effect of mine tailings composition on shear behavior and shear strength of co-mixed mine waste rock and tailings (WR&T). Crushed gravel was used as a synthetic waste rock and mixed with four types of tailings: (1) fine-grained garnet, (2) coarse-grained garnet, (3) copper, and (4) soda ash. Co-mixed WR&T specimens were prepared to target mixture ratios of mass of waste rock to mass of tailings (R) such that tailings “just filled” interparticle void space of the waste rock (i.e., optimum mixture ratio, R opt). Triaxial compression tests were conducted on waste rock, tailings, and mixed waste at effective confining stresses (\(\sigma_{\text{c}}^{{\prime }}\)) ranging from 5 to 40 kPa to represent stresses anticipated in final earthen covers for waste containment facilities. Waste rock and co-mixed WR&T specimens were 150 mm in diameter by 300 mm tall, whereas tailings specimens were 38 mm in diameter by 76 mm tall. Shear strength was quantified using effective stress friction angles (?′) from undrained tests: ?′ for waste rock was 37°, ?′ for tailings ranged from 34° to 41°, and ?′ for WR&T mixtures ranged from 38° to 40°. Thus, shear strength of co-mixed WR&T was comparable to waste rock regardless of tailings composition. Shear behavior of WR&T mixtures was a function of R and tailings composition. Tailings influenced shear behavior for R < R opt and when tailings predominantly were silt. Shear behavior was influenced by waste rock for R ≥ R opt and when tailings predominantly were sand or included clay particles. 相似文献
14.
Fine grained dolomite has been deformed in over twenty compression experiments in a Griggs-type piston-cylinder apparatus at various P and T conditions. Preferred orientation determined quantitatively using X-ray techniques and spherical harmonic analysis of the data is presented in inverse pole-figures of — 2/m symmetry. In most cases specimens display strong preferred orientation which varies mainly as a function of temperature. At all conditions it is very different from calcitic limestone. Although there is no significant grain growth even at 1000 °C the simple c-axes maximum fabric above 700 °C might be the result of recrystallization or translation on c. Below 700 °C, the preferred orientation is much weaker and complex. The primary maximum in the inverse pole-figure is near e, a secondary maximum near a high angle positive rhomb, principal minima are at c and f. This inverse pole-figure is consistent with f-twinning and translation gliding on r (t = a ?), two mechanisms which counteract each other. The latter is a new deformation mechanism for dolomite which we propose in order to explain the pattern of preferred orientation. The minimum at c is less pronounced below 100 ° C suggesting that c-translation may be active, but in these fine-grained aggregates it appears to be less important than is expected from single crystal experiments (Higgs and Handin, 1959), at least at low temperatures. 相似文献
15.
《International Geology Review》2012,54(6):749-766
Two stages of extension affected the Yiwulüshan area, forming the Yiwulü High-Temperature Extensional Ductile Shear Zone (YHED) and the Waziyu Low-Temperature Extensional Ductile Shear Zone (WLED) during the Middle–Late Jurassic and Early Cretaceous, respectively. The YHED and WLED are characterized by elongation strain and plane strain, respectively. Kinematic vorticity values (Wk ), estimated from polar Mohr diagrams, suggest that pure shear-dominated and thinning-related shearing generated the YHED, whereas simple and pure shearing created the WLED during crustal thinning. From the thickness (H) and the thinning rate (μ) of the ductile shear zones, the reduced crustal thickness due to ductile shearing was estimated to be approximately 3.72 km. Based on structural analysis, contact relationships, and geochronological data, we propose that intense extensional detachment contributed to the stratigraphic gap along a Middle–Late Jurassic ductile detachment shear zone at the contact between Palaeo-Mesoproterozoic metasedimentary rocks and the Archaean basement. Furthermore, this ductile detachment shear zone was reactivated in the Early Cretaceous and lasted for 7.48 million years. After correlating the stratigraphy of the Yiwulüshan area with regions adjacent to it, we conclude that a 1.46–1.69 km-thick section of Proterozoic and Archaean basement is missing along the ductile detachment shear zone. We estimate that the crustal thickness in the Yiwulüshan region has been reduced by more than 5.41 km because of extension-related shearing and this stratigraphic gap. In addition, numerous Mesozoic extensional structures occur throughout the northeastern North China Craton, and crustal thinning has been accommodated along all of them. Our findings highlight the importance of extensional detachments and crustal thinning to lithospheric thinning. 相似文献
16.
Since cross-anisotropic sand behaves differently when the loading direction or the stress state changes, the influences of the loading direction and the intermediate principal stress ratio (b = (σ 2 ? σ 3)/(σ 1 ? σ 3)) on the initiation of strain localization need study. According to the loading angle (angle between the major principal stress direction and the normal of bedding plane), a 3D non-coaxial non-associated elasto-plasticity hardening model was proposed by modifying Lode angle formulation of the Mohr–Coulomb yield function and the stress–dilatancy function. By using bifurcation analysis, the model was used to predict the initiation of strain localization under plane strain and true triaxial conditions. The predictions of the plane strain tests show that the major principal strain at the bifurcation points increases with the loading angle, while the stress ratio decreases with the loading angle. According to the loading angle and the intermediate principal stress ratio, the true triaxial tests were analyzed in three sectors. The stress–strain behavior and the volumetric strain in each sector can be well captured by the proposed model. Strain localization occurs in most b value conditions in all three sectors except for those which are close to triaxial compression condition (b = 0). The difference between the peak shear strength corresponding to the strain localization and the ultimate shear strength corresponding to plastic limit becomes obvious when the b value is near 0.4. The influence of bifurcation on the shear strength becomes weak when the loading direction changes from perpendicular to the bedding plane to parallel. The bifurcation analysis based on the proposed model gives out major principal strain and peak shear strength at the initiation of strain localization; the given results are consistent with experiments. 相似文献
17.
Kinematic models of various types of transpression have been used to explain fabric features and strain in many natural deformation studies. Here, a mathematical model that encompasses all monoclinic and triclinic transpressional deformations including triclinic deformation with inclined simple shear (ϕ) and/or inclined extrusion orientations (υ) can be tested using a step-by-step approach with available field evidence. Two cases are presented. The first case from the Wabigoon–Quetico boundary in the Archean Superior Province utilizes both fabric orientation and quantified strain data. The best fit of the field evidence to the model indicates that deformation likely took place along subvertical shear zones via transpression with subhorizontal simple shear (ϕ = 0–20°) and variable inclined extrusion direction (extrusion can be either east or west and υ typically indicates extrusion orientations between 0 and 50° from vertical). The second case of the South Iberian shear zone has fabric orientation data, but no quantifiable strain possibilities. The best fit of the field evidence to the model indicates that deformation likely took place along a moderately inclined shear zone via transpression with subhorizontal simple shear (ϕ = 0–20°) and variable inclined extrusion direction (υ values between 0° and 80° from the true dip of the shear zone). Using this protocol in other examples of natural deformation will allow further constraints to be applied to kinematic models. 相似文献
18.
The Ribeira Belt (Brazil) is a Neoproterozoic collisional-related feature that was located in a south-central position in West Gondwana. We present quantitative data on finite strain, flow vorticity and deformation temperatures for the Curitiba Terrane, a major segment of the southern Ribeira Belt. Six deformation phases (D1-D6) related with crustal thickening and exhumation were recognized. D1 and D2-related microstructures are preserved exclusively within porphyroblasts, in part grown during stages of high-pressure (∼9–12 kbar) isobaric heating after crustal thickening. D3 phase was active from peak metamorphism attained in contrasting crustal levels (810–400 °C), to the early stage of exhumation (500–400 °C), as indicated by petrological, microstructural and quartz c-axis fabric evidence. Kinematic vorticity results indicate that the SL3 mylonitic fabric resulted from a simple shear-dominated deformation related with westward thrusting. North-verging overturned D4 folds with E-W-trending subhorizontal axes derived from a pure shear-dominated deformation. Regional D5 open folds with subvertical axes and NNE-SSW-trending traces were produced by indentation tectonics. D6 phase comprises retrograde orogen-parallel transcurrent shear zones related with scape tectonics. Geochronological data indicate that D3-D6 phases occurred between 584 and 580 Ma, suggesting a fast exhumation rate of ∼8 mm/year for the deepest rocks from the southern Ribeira Belt. 相似文献
19.
We resolve the anisotropy of magnetic susceptibility (AMS) axes along fault planes, cores and damage zones in rocks that crop out next to the Dead Sea Transform (DST) plate boundary. We measured 261 samples of mainly diamagnetic dolostones that were collected from 15 stations. To test the possible effect of the iron content on the AMS we analyzed the Fe concentrations of the samples in different rock phases. Dolostones with mean magnetic susceptibility value lower than −4 × 10−6 SI and iron content less than ∼1000 ppm are suitable for diamagnetic AMS-based strain analysis. The dolostones along fault planes display AMS fabrics that significantly deviate from the primary “sedimentary fabric”. The characteristics of these fabrics include well-grouped, sub-horizontal, minimum principal AMS axes (k3) and sub-vertical magnetic foliations commonly defined by maximum and intermediate principal AMS axes (k1 and k2 axes, respectively). These fabrics are distinctive along fault planes located tens of kilometers apart, with strikes ranging between NNW-SSE and NNE-SSW and different senses of motion. The obtained magnetic foliations (k1–k2) are sub-parallel (within ∼20°) to the fault planes. Based on rock magnetic and geochemical analyses, we interpret the AMS fabrics as the product of both shape and crystallographic anisotropy of the dolostones. Preferred shape alignment evolves due to mechanical rotation of subordinate particles and rock fragments at the fault core. Preferred crystallographic orientation results from elevated frictional heating (>300 °C) during faulting, which enhances c-axes alignment in the cement-supported dolomite breccia due to crystal-plastic processes. The penetrative deformation within fault zones resulted from the local, fault-related strain field and does not reflect the regional strain field. The analyzed AMS fabrics together with fault-plane kinematics provide valuable information on faulting characteristics in the uppermost crust. 相似文献
20.
Lutz Kübler 《Physics and Chemistry of Minerals》1985,12(6):353-362
Single crystals of hexagonal and monoclinic pyrrhotite, Fe1?xS, have been experimentally deformed by uniaxial compression at 300 MPa confining pressure, and at a strain rate of 1 × 10?5 s?1 in the temperature range from 200° C to 400° C. Very high anisotropy characterizes the mechanical behaviour of the crystal structure. During compression parallel to thec-axis, when no slip system may be activated, the maximum strength is observed. One or two degrees of non-parallelism between [c] and σ1 results in slip on the basal plane, illustrating the very low resistance of the lattice against shear in this plane. At σ1 Λ(0001)=45°, i.e. when maximum resolved shear stress is attained on the basal plane, the strength reaches a minimum. Thecritical resolved shear stress (CRSS) increases from less than 4.7 MPa at 400° C to 52 MPa at 200° C. A new slip system, \((10\overline 1 0)\parallel \left\langle {1\overline 2 10} \right\rangle \) prism slip, is described. It is activated only at high angles (>70°) between σ1 and [c]. The CRSS of the prism slip ranges from 7 MPa (400° C) to 115 MPa (200° C). Twinning on \((10\overline 1 2)[(10\overline 1 2):(1\overline 2 10)]\) , earlier reported by several authors, has been produced only at the highest temperature either as secondary feature during pressure release (compression ‖[c]) or in heterogeneously strained areas (compression ⊥[c]). As twinning and prism slip attain their maximum values of the Schmidt factor under nearly equal stress conditions it is postulated that the former of the two deformation modes has the higher shear resistance. 相似文献