首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 234 毫秒
1.
骆遥  姚长利 《地球科学》2007,32(4):517-522
在改进均匀多面体重力场正演公式基础上, 利用二阶张量的坐标变换实现对多面体重力场梯度的求解, 推导了新的多面体重力梯度和磁场的正演公式, 给出了新的统一的均匀多面体重力场、梯度及磁场正演表达式形式, 并用理论模型进行了检验.同时, 应用新的多面体重力场梯度正演公式推导出新的长方体重力场垂直梯度理论表达式.本文给出的均匀多面体重力场、梯度及磁场正演表达式形式统一, 重磁场联合正演中可相互利用其计算过程中的结果, 避免重复计算以提高正演计算效率.   相似文献   

2.
Beldih mine at the central part of the South Purulia Shear Zone (SPSZ) has been reported with low grade uranium-bearing formation within quartz-magnetite-apatite host in kaolinized formation. Therefore, the present integrated geophysical study with gravity, magnetic, radiometric, very low frequency electromagnetic (VLF) and gradient resistivity profiling methods around the known mineralized zones aimed at identifying the exact geophysical signatures and lateral extent of these uranium mineralization bands. The closely spaced gravity-magnetic contours over the low to high anomaly transition zones of Bouguer, reduced-to-pole magnetic, and trend surface separated residual gravity-magnetic anomaly maps indicate the possibility of high altered zone(s) along NW-SE direction at the central part of the study area. High current density plots of VLF method and the low resistive zones in gradient resistivity study depict the coincidence with low gravity, moderately high magnetic and low resistivity anomalies at the same locations. Moderate high radioactive zones have also been observed over these locations. This also suggests the existence of radioactive mineralization over this region. Along profile P2, drilled borehole data revealed the presence of uranium mineralization at a depth of ~100 m. The vertical projection of this mineralization band also identified as low gravity, low resistivity and high magnetic anomaly zone. Thus, the application of integrated geophysical techniques supported by geological information successfully recognized the nature of geophysical signatures associated with the uranium mineralization of this region. This enhances the scope of further integrated geophysical investigations in the unexplored regions of SPSZ.  相似文献   

3.
扰动重力梯度是扰动重力位的二阶导数,相对于其他重力场元素能更多地反映变化的不规则地球产生的高频信息。在使用高阶次球谐系数模型获取大范围高分辨率的扰动重力梯度数据时,存在重复运算多、计算效率低下、耗时较长的问题。针对该问题,推导了简化计算公式,将中间变量提取出来作为全局参数和局部参数单独进行计算、存储,从而有效减少重复运算;并在简化公式的基础上,提出了扰动重力梯度张量快速异构并行算法,利用CUDA(compute unified device architecture)实现了梯度全张量在GPU端的并行计算。根据Txx、Tyy、Tzz三个分量满足Laplace条件验证了算法可靠性,并与传统串行算法进行了计算效率对比,实验结果表明,相较于串行算法,所提算法可减少90%以上计算耗时,可将计算效率提高60倍以上。最后利用该算法基于2 190阶EIGEN6C4模型快速构建了5′×5′分辨率的全球扰动重力梯度全张量图,计算结果显示了扰动重力梯度同地形、地球质量分布变化的相关性及其在全球范围内的数值特征。  相似文献   

4.
安徽省庐江县泥河铁矿重磁异常特征   总被引:1,自引:0,他引:1  
汪青松 《地质与勘探》2012,48(1):148-154
[摘 要] 泥河铁矿是应用理论找矿、验证磁异常发现的一处大型铁、硫火山岩型矿床。被中国地质 调查局评为2008 年度十大发现之首,是地质找矿新机制“泥河模式冶矿床。重磁勘探在该矿床的发现和 普查的过程中发挥了重要作用,重磁异常特征倍受关注。泥河铁矿位于鼻状重力高异常区,剩余重力异 常与矿体分布相吻合;原始地磁场以存在△T 负异常为特征,△T 正异常松散、零乱,与周边异常无明显 区别;△T 化极异常强度低,经上延或滤波等信息提取处理后形态较好,与矿体分布一致,是验证和矿床 普查布钻的重要依据,定量反演计算也在矿床普查过程中发挥了作用。  相似文献   

5.
基于GPU的任意三维复杂形体重磁异常快速计算   总被引:3,自引:0,他引:3  
提出了基于图形处理单元的任意三维复杂形体的重磁异常快速正演计算方法。将地下半空间剖分为大小相等规则排列的一组长方体单元,任意三维复杂形体可以表示成很多不同体积和密度(磁性)的长方体的近似组合。用解析方法计算出所有这些长方体在计算点的重力(磁力)异常,并累加求和,就可以得到整个模型体在计算点引起的重(磁)异常值。为了提高近似程度,需将地下半空间剖分得很细,用传统的CPU串行程序计算相当耗时。GPU在处理能力和存储器带宽上相对CPU有明显优势,采用GPU并行算法,可大大提高计算速度。相关试验结果表明,用GPU实现的正演快速算法计算结果正确,效率明显提高,为重磁异常三维物性反演提供了基础。  相似文献   

6.
重力归一化总梯度的三维计算中,将圆滑滤波因子分别引入向下延拓和导数换算响应因子中,推导了其计算公式及数值实现过程,同时给出了具体的计算步骤;对含油气球冠模型的三维归一化总梯度场特征进行了分析与研究。研究结果表明,对于含油气球冠模型来说,不同于均匀球冠模型在各个深度的切平面等值线图中表现出单峰异常的特征,其三维归一化总梯度场的特征表现为:无论在过中心剖面的等值线图还是在某个深度的切片图中,只有当截止频率取值适当时才可以表现出"两高夹一低"的典型储油气藏标志特征,若取值不当,其表现出来的特征与均匀球冠模型相似。此外,归一化总梯度场等值线图中出现"两高夹一低"的位置,往往是含油气球冠所在位置和深度。  相似文献   

7.
简要介绍了复杂地形下局部重磁场源全方位成像系统的主要功能,并对云南某地的2个局部磁异常进行了磁化方向和磁质心反演,并进行了全方位延拓和磁源边界计算,最后给出了磁源成像断面图和磁源成像立体图。  相似文献   

8.
钟姑地区位于宁芜中生代火山岩盆地南段,已发现有白象山铁矿等多个大型铁矿,是长江中下游成矿带以玢岩型铁矿为主的矿集区。本文以钟姑地区实测岩石物性参数为桥梁,以实测重磁数据为基础,分析了该区白象山铁矿、钟九铁矿和云楼铁矿的重磁场分布特征,并根据典型矿区已知地质条件,运用成熟的2.5D重磁联合反演技术进行计算,从定量角度认识铁矿体深部发育形态、位置与重磁异常之间对应关系,建立钟姑地区白象山铁矿等典型矿床的重磁找矿模式,为该区进一步找矿突破提供地球物理场信息。  相似文献   

9.
A new method of interpreting magnetic anomalies of arbitrarily-magnetised horizontal circular cylinders, dipping dykes and vertical steps is presented. The method makes use of both horizontal and vertical gradients of the magnetic field of the model under consideration, rather than the observed magnetic anomaly. Vertical and horizontal gradients are calculated from the observed anomalies, and plotted one against the other to find out the locus of tip of the resultant gradient vector. This locus is a symmetrical curve for each of the three models mentioned above. The properties of these curves are used to deduce the various parameters of these models and the direction of magnetisation.  相似文献   

10.
大兴安岭中段地球物理特征及地质解释   总被引:2,自引:0,他引:2  
张广范 《地质与资源》2005,14(4):287-292
以区域地质资料和物探资料为依据,对大兴安岭中段地区重、磁异常特征及其对应的地质情况进行综合解释,探讨区域矿产分布与重磁场的关系,以及不同属性矿产的磁异常特点,指出该区重磁异常对寻找多金属矿床有指导作用.  相似文献   

11.
东海地区重磁场特征及其地质意义   总被引:1,自引:0,他引:1  
重磁方法是地球物理研究中的重要分支,其以位场理论为基础,具有在水平方向上的高分辨率能力并能够提供地壳深部结构的信息,从而对于研究沉积盆地的形成演化过程起着经济有效的作用.文章以东海地区近年的重磁数据为基础,分析了重磁场特征,布格异常值介于-160~460 mGal,在正值背景上发育一些局部的重力低圈闭,布格重力异常的主体走向为NE向,磁力异常值介于-200~+ 500 nT,磁力异常的主体走向为NE向.同时,利用磁异常数据计算了东海的磁性基底界面,磁性基底深度在4~12 km之间变化,各个地区磁性基底深度起伏变化不同,结合前人研究成果,认为东海地区广泛存在中生界地层.  相似文献   

12.
成矿带的展布受地质构造的控制,而地质构造在重磁异常上有明显反映。为了研究秦岭造山带中段重磁异常与成矿 带的关系,该文系统整理、处理了秦岭造山带中段已获得的重磁力测量资料,分析研究了重磁异常的展布特征、推断了研 究区的断裂构造,讨论了结晶基底的起伏特征,并结合区域地质资料及矿床分布资料讨论了重磁场特征及其与地质构造、 成矿带的关系。结果表明,秦岭造山带中段成矿带均分布在重、磁异常梯度带上或几组不同方向异常的交汇部位,尤其在 局部重力高异常范围内及其边部梯度带上矿体富集。这一结果为研究秦岭造山带的地质演化、地质构造(尤其是深部构 造)、断裂分布及下一步的成矿有利区预测提供重要的参考信息。  相似文献   

13.
总结了复杂形体重、磁异常各种正演方法,并对各种方法所具备的优点和存在的缺点进行了分析说明。据此讨论了复杂形体重、磁异常正演方法将来的发展方向。  相似文献   

14.
郎和都格矿区地表沙土和草原覆盖严重,直接寻找钨多金属矿的信息较少。地质地球化学研究结果表明,与钨多金属矿关系密切的是早白垩世钾长花岗岩,赋矿围岩主要是二叠纪辉石闪长岩。根据围岩与矿体之间的物性差异,完成了矿区1∶1万地质填图、磁法和重力测量,对数据进行重磁联合反演,识别出3条走向北东、长度800~3 000 m、宽度50~100 m的重要的构造蚀变带(分别对应于负磁异常带),均分布在矿区西北侧的辉石闪长岩中,且平行于辉石闪长岩和钾长花岗岩的接触带。预测了6个综合物探异常区,也位于矿区西北侧的辉石闪长岩分布区,单个异常面积为500 800 m2,异常深度不超过1 000 m。经钻探工程验证,在3个异常部位发现了隐伏的构造破碎带型钨多金属找矿靶区,钨多金属矿体埋藏深度为150~650 m,单个矿体厚度为2~4 m。表明成矿地质条件分析与重磁联合反演相结合的定位预测方法,在覆盖区寻找钨矿效果明显,值得进一步推广。  相似文献   

15.
复小波变换反演重力异常   总被引:6,自引:2,他引:6  
陈玉东 《物探与化探》2003,27(5):354-361
对国外最新研究位场连续复小波变换理论的一系列文章进行了系统归纳、推导与总结,推出了板状体重力场的小波变换系数解析式.对齐次场源形成的重力场进行柯西小波变换,等效于重力场向上延拓和求导两种运算相结合,并服从小波变换双尺度定律.利用小波变换系数模沿极值轴线的变化特征同时反演重力场源的几何形状、埋深、倾角.独立编写了所有程序,并对不同理论模型进行了大量计算,对所有结果进行了分析与讨论.此法为重力场反演提供了一条新的途径,实用于重磁资料自动化处理、反演与解释.  相似文献   

16.
由于地质体和矿体的形态非常复杂,使用长方体网格离散建立正演模型时可能和真实情况有很大差别,因此计算结果可靠性差。本文提出一种基于约束Delaunay网格剖分的方法对地质体进行离散并进行重力建模,在模型边界等复杂区域使用网格自适应加密技术,将三维地质体离散为有限个四面体;并详细推导出针对四面体网格的重力正演公式,实现了基于约束Delaunay网格剖分技术的三维重力数值模拟;最后,针对一个合成数据模型,将计算解与解析解对比。结果表明,细化网格的模拟结果比粗糙网格更好,满足数值模拟的精度要求。将该方法应用到金川矿区实际地质体建模中,根据局部需要,建立各处网格密度不均匀的三维模型,并计算该模型的地表重力场,而后对比模拟数据与实测数据,结果表明Delaunay网格建模方法具有很强的适用性,能够模拟复杂的地质体重力异常。  相似文献   

17.
根据重力位、重力异常、磁位和磁异常公式,应用泊松关系,通过严格的公式推导,给出了重力位、重力异常、磁位和磁异常之间的数学关系,从而使重磁异常正演计算表达式包含于简单的规则之中,揭示出均质多面体重磁异常正演理论的一致性。  相似文献   

18.
As gravity field,magnetic field,electric field and seismic wave field are all physical fields,their object function,reverse function and compound function are certainly infinite contiuously differentiable func-tions which can be expanded into Taylor (Fourier) series within domain of definition and be further reduced in-to solving stochastic distribution function of series and statistic inference of optimal approximation,This is the basis of combined gravity-magnetic-electric-seismic inversion built on the basis of separation of field and source gravity-magnetic difference-value(D-value)trend surface,taking distribution-independent fault sys-tem as its unit,depths of seismic and electric interfaces of interests as its corresponding bivariate compound re-verse function of gravity-magnetic anomalies and using high order polynomial(high order trigonometric func-tion)approximating to its series distribution,The difference from current dominant inversion techniques is that,first,it does not respectively create gravity-seismic,magnetic-seismic deterministic inversion model from theoretical model,but combines gravity-magnetic-electric-seismic stochastic inversion model from stochastic model;second,after the concept of equivalent geological body being introduced,using feature of independent variable of gravity-magnetic field functions,taking density and susceptibility related to gravity-magnetic func-tion as default parameters of model,the deterministic model is established owing to better solution to the con-tradictioc of difficulty in identifying strata and less test analytical data for density and susceptibility in newly explored area;third,under assumption of independent parent distribution,a real modeling by strata,the prob-lem of difficult plane closure arising in profile modeling is avoided,This technology has richer and more detailed fault and strata information than sparse pattern seismic data in newly explored area,successfully inverses and plots structural map of Indosinian discontinuty in Hefei basin with combined gravity-magnetic-electric-seismic inversion,With development of high precision gravity-magnetic and overall geophysical technology,it is certain for introducing new methods of stochastic modeling and computational intelligence and promoting the develop-ment of combined gravity-magnetic-electric-seismic inversion to open a new substantial and promoting the develop-ment of combined gravity-magnetic-electric-seismic inversion to open a new substantial path.  相似文献   

19.
A new approach is developed to determine the model parameters of a two-dimensional inclined sheet from self-potential anomaly. In this method, the numerical horizontal self-potential gradient obtained from self-potential anomaly is convolved using Hilbert transform to obtain the vertical self-potential gradient. The complex gradient is the sum of horizontal and vertical gradient anomalies. The horizontal and vertical gradients are plotted in one graph to form the complex gradient graph. By defining few characteristic points and distances along the complex gradient profile, procedures are then formulated using the analytical functions of the complex gradients to obtain the model parameters of sheet-like structures. The validity of the new proposed method has been tested on synthetic data with and without random noise. The obtained parameters are in congruence with the model parameters when using noise-free synthetic data. After adding 10% random error in the synthetic data, the maximum error in model parameters is 11.8%. Moreover, the method have been applied to analyze and interpret the self-potential anomaly measured on a graphite ore body at southern Bavarian woods, Germany to prove its efficiency where an acceptable agreement has been noticed between the obtained results and the other published results.  相似文献   

20.
重力位余弦变换谱基本特征   总被引:1,自引:1,他引:0  
为获得重力异常余弦变换谱的通式,提出并证明了3个定理;利用它们推导了点质量和直立矩形柱体的重力异常余弦变换谱理论公式,同时给出了重力异常余弦变换谱通式。分析了点质量和直立矩形柱体重力异常余弦变换谱的基本特征:点质量二维余弦变换谱等值线呈1/4同心圆形状,等值线随着波数的增大而变稀;直立矩形柱体谱出现了周期性变化的零等值线,该等值线将非零等值线划分为a×b个矩形区域,而且等值线值在各矩形型区域中正负交替变化,随着波数的增大,不同的矩型域中等值线值呈e指数衰减特征。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号