共查询到20条相似文献，搜索用时 31 毫秒
1.
The integrated wave equation datuming scheme is an integrated datuming method to implement the wave equation velocity replacement with a one-way extrapolator for overthrust data. The integrated wave equation datuming scheme is accomplished by downward continuing the data from the topography to a non-planar base of the weathering layer, followed by an upward continuation from the base of the weathering layer to a final planar datum. Both the downward and the upward continuation are accomplished by a one-way extrapolator by a classical 'two-step' implementation. The topographic datuming operator is a distinctive technique by which the shots and receivers are downward continued simultaneously. Although its inadaptability to non-planar datum and the strong lateral variation of the near-surface structure constrains its application to the downward continuation of the overthrust data, we found that the 'one-step' feature of the topographic datuming operator is extremely suitable for the upward continuation. In this paper, the topographic datuming operator is incorporated into the integrated wave equation datuming scheme to perform upward continuation instead of a one-way extrapolator – thus a revised integrated wave equation datuming scheme is constructed. Compared with the previous scheme, the computatiol cost of the revised integrated wave equation datuming scheme is greatly reduced, thus the applicability of the integrated wave equation datuming scheme is further improved. The synthetic and real data examples demonstrate its effectiveness and efficiency. 相似文献
2.
Cui Xingfu Li Hongbing Hu Ying Liang Hong Qi Li 《应用地球物理》2007,4(2):94-100
When topography and low velocity zone differences vary greatly, conventional vertical static time shifts will cause wavefield distortion and influence wave equation seismic imaging for seismic data acquired on a complex near surface. In this paper, we propose an approach to datum correction that combines a joint tomography inversion with wavefield continuation to solve the static problem for seismic data on rugged acquisition topography. First, the near surface model is obtained by refracted wave tomography inversion. Second, the wavefield of sources and receivers are continued downward and upward to accomplish datum correction starting from a flat surface and locating the datum above topography. Based on the reciprocal theorem, Huygens＇ and Fresnel principles, the location of sources and receivers, and regarding the recorded data on the surface as a secondary emission, the sources and receivers are upward-continued to the datum above topography respectively. Thus, the datum correction using joint tomography inversion and wavefield continuation with the condition of a complex near surface is accomplished. 相似文献
3.
波动方程基准面校正处理被认为是当地表高程变化剧烈、地表一致性假设又不成立的情况下对于常规高程基准面校正的必要替代. 在二维波动方程基准面校正方面,前人已经作了大量工作,并且在实际应用中获得了良好的效果,应该将其进一步推广到三维. 本文采用三维频率空间域有限差分波场延拓算子以“逐步－累加”的方式实现了三维波动方程基准面校正,并对实际数据进行了处理. 对于西部某三维数据的实际计算结果表明,相对于传统的模型法高程静校正,波动方程基准面校正更合理地实现了基准面校正,有助于提高后续的速度分析精度和成像质量. 相似文献
4.
常规的转换波静校正的基本思想都是从地震波的运动学特征出发,基于地表一致性假设.在地表条件复杂和地表高程相差较大的地区,它不仅无法解决严重的静校正问题,反而会带来新的畸变.本文基于频率波数域波动方程偏移原理,采用波场延拓方法实现转换波静校正,其关键点在于时间空间域和频率波数域的相对应.文中通过坐标变换将起伏地表转化为新坐标系下的水平地表,把炮点和检波点映射到同一水平面上,然后在新坐标系下推导频率域波动方程延拓公式,接着对下行波P和上行转换波SV分别利用近地表速度向上延拓到基准面,恢复起伏地表到基准面之间的真实波场,最后转换到原始坐标系取出基准面数据完成转换波静校正.通过对模拟和实际数据处理,证明该方法是正确和有效的. 相似文献
5.
浅层地震反射法是一种常用的勘探方法.在浅层地震资料处理中,静校正的精度直接影响速度反演的结果和叠加剖面的质量,在地形平缓时,固定基准面静校正可以满足勘探精度的要求,但在复杂地形条件下,其存在较大误差,即使采用浮动基准面,仍会由于地表一致性假设而残余静校正量,不能消除地形起伏引起的影响,为了提高浅层地震反射静校正的精度必须在常规静校正后进行一次剩余静校正,本文给出起伏地形条件下,滑动基准面(过共中心点的水平面即为该共中心点的滑动基准面)的剩余静校正量,该校正量与炮检距、反射层埋深、地层波速以及炮点和接收点高程有关,适用于单一介质和层状介质情况,本文通过对典型地形起伏的3个水平均匀层状介质理论地质模型的速度谱计算和分析,阐明在复杂地形条件下,应用本文提出的剩余静校正方法可以消除地形起伏的影响,提高静校正精度,在此基础上做动校正可以得到高质量的水平叠加剖面. 相似文献
6.
We analyze the characteristics of different floating datums for static corrections and discuss the methods for determining them. The effect of different floating datum corrections was studied using theoretical model experiments, resulting in the conclusion that the velocity obtained after the floating datum correction with the minimum static correction errors depends on the velocity of the layer below the low velocity layer （LVL） lower boundary and is not related to topographic relief and LVL structure. For the real data processing case, wave equation numerical model experiments were conducted which resulted in a new method for calculating objective functions based on the waveform and modifications to the calculation equation for minimum static correction errors to make the method suitable for real data static correction processing using inhomogeneous velocity models with lower velocity boundary relief. Real data processing results demonstrate the method＇s superiority. 相似文献
7.
Recent advances in commodity high-performance computing technology have dramatically reduced the computational cost for solving the seismic wave equation in complex earth structure models. As a consequence, wave-equation-based seismic tomography techniques are being actively developed and gradually adopted in routine subsurface seismic imaging practices. Wave-equation travel-time tomography is a seismic tomography technique that inverts cross-correlation travel-time misfits using full-wave Fréchet kernels computed by solving the wave equation. This technique can be implemented very efficiently using the adjoint method, in which the misfits are back-propagated from the receivers (i.e., seismometers) to produce the adjoint wave-field and the interaction between the adjoint wave-field and the forward wave-field from the seismic source gives the gradient of the objective function. Once the gradient is available, a gradient-based optimization algorithm can then be adopted to produce an optimal earth structure model that minimizes the objective function. This methodology is conceptually straightforward, but its implementation in practical situations is highly complex, error-prone and computationally demanding. In this study, we demonstrate the feasibility of automating wave-equation travel-time tomography based on the adjoint method using Kepler, an open-source software package for designing, managing and executing scientific workflows. The workflow technology allows us to abstract away much of the complexity involved in the implementation in a manner that is both robust and scalable. Our automated adjoint wave-equation travel-time tomography package has been successfully applied on a real active-source seismic dataset. 相似文献
8.
炮点和海底地震仪(ocean bottom seismometer,OBS)位置校正是三维地震数据处理的基本环节,也是获取高精度三维速度结构的关键所在.本文基于南海洋陆转换带(Continental-Oceanic-Transition zone,COT)IODP367/368钻探区开展的三维OBS深地震探测数据,开展了炮点及OBS位置校正研究,新的校正方法主要体现在三个方面:(1)利用连续三个炮点的平均航向对中间炮点进行位置校正,更真实地反映气枪枪阵与船体之间的软连接状态;(2)根据"滑动窗口"思想将海水声学速度阈值划分成N等份,通过循环测试获得全局最优的OBS位置校正结果,改进了前人方法只能获得局部最优解的问题;(3)针对单条测线穿过的OBS,通过加入其临近测线的直达水波走时,构成视双测线OBS位置校正法,提高了校正精度.49台OBS位置校正结果表明,除3台单测线法校正的OBS在垂直测线方向存在较大不确定性外,其余误差范围均为35m左右.本文改进的OBS位置校正方法,不仅提高了单条测线穿过的OBS位置校正精度,保证后续三维地震结构研究的可靠性,而且为今后类似的OBS位置校正提供了经验和借鉴. 相似文献
9.
10.
消除海底起伏影响的海洋地震波场正反向延拓 总被引：1，自引：0，他引：1
为了解决海底起伏变化对地震波场的影响问题,本文提出将（x-z）域中的曲网格映射成（ξ,η）域中的矩形网格,推导出（ξ,η）域中的二维标量声波方程,根据推导出来的波动方程采用逆时有限差分法将海面上采集到的地震波场在（ξ,η）域中向下延拓至海底面,延拓时采用海水的速度,然后采用顺时有限差分法将延拓后的地震波场再反延拓到海面上,延拓时采用海底面以下地层的速度,从而消除了海底起伏带来的负面影响。模型及实际地震资料的计算分析表明该方法不但能够校正由于海底起伏所引起的海底面下地层反射波场的不连续性还能够校正由于海底起伏所引起的地震波的动力学特征的变化。对延拓前后的地震波场进行速度反演,延拓后反演的地层速度比延拓前反演的地层速度的精度提高很多,延拓前后地震波场的叠加剖面对比表明该延拓方法能够明显提高地震波场的成像质量。 相似文献
11.
In 2005, a multicomponent ocean bottom node data set was collected by BP and BHP Billiton in the Atlantis field in the Gulf of Mexico. Our results are based on data from a few sparse nodes with millions of shots that were analysed as common receiver azimuthal gathers. A first‐order look at P‐wave arrivals on a common receiver gather at a constant offset reveals variation of P‐wave arrival time as a function of azimuth indicating the presence of azimuthal anisotropy at the top few layers. This prompted us to investigate shear arrivals on the horizontal component data. After preliminary processing, including a static correction, the data were optimally rotated to radial (R) and transverse (T) components. The R component shows azimuthal variation of traveltime indicating variation of velocity with azimuth; the corresponding T component shows azimuthal variation of amplitude and phase (polarity reversal). The observed shear‐wave (S‐wave) splitting, previously observed azimuthal P‐wave velocity variation and azimuthal P‐wave amplitude variation, all indicate the occurrence of anisotropy in the shallow (just below the seafloor) subsea sediment in the area. From the radial component azimuthal gather, we analysed the PP‐ and PS‐wave amplitude variation for the first few layers and determined corresponding anisotropy parameter and VP/VS values. Since fracture at this depth is not likely to occur, we attribute the observed azimuthal anisotropy to the presence of microcracks and grain boundary orientation due to stress. The evidence of anisotropy is ubiquitous in this data set and thus it argues strongly in favour of considering anisotropy in depth imaging for obtaining realistic subsurface images, at the least. 相似文献
12.
提出一种可对起伏地表采集的三维地震资料直接进行偏移成像的叠前时间偏移方法和流程.它用两个等效速度描述近地表和上覆层对地震波传播的影响,可对炮、检点不在同一水平面的三维地震资料直接进行叠前时间偏移处理.该方法不对近地表地震波传播做垂直出、入射假定,因此可适应高速层出露等不存在明显低、降速带情况.描述近地表和上覆层的两个等效速度参数可依据偏移道集的同相轴是否平直来确定,避免了确定近地表速度的困难;而对已知近地表速度的情况,则可进一步修正近地表速度,获得更好的成像效果.用三维起伏地表的理论数据和中国东部某工区实际数据验证了所发展方法和处理流程的有效性和实用性. 相似文献
13.
14.
We apply a redatuming methodology, designed to handle rugged topography and the presence of high‐velocity layers near the acquisition surface, to a 2D land seismic data set acquired in Saudi Arabia. This methodology is based on a recently developed prestack operator, which we call the topographic datuming operator (TDO). The TDO, unlike static corrections, allows for the movement of reflections laterally with respect to their true locations, corresponding to the new datum level. Thus, it mitigates mispositioning of events and velocity bias introduced by the assumption of surface consistency and the time‐invariant time shifts brought about by static corrections. Using the shallow velocities estimated from refracted events, the TDO provides a superior continuity of reflections and better focusing than that obtained from conventional static corrections in most parts of the processed 2D line. The computational cost of applying the TDO is only slightly higher than static corrections. The marginal additional computational cost and the possibility of estimating, after TDO redatuming, stacking velocities that are not affected by a spurious positive bias, as in the case of static corrections, are further advantages of the proposed methodology. The likelihood of strong heterogeneities in the most complex part of the line limits the applicability of any approach based upon geometrical optics; however, the TDO produces results that are slightly better than those obtained from static corrections because of its ability to partially collapse diffractions generated in the near surface. 相似文献
15.
Yonghai Zhang 《Geophysical Prospecting》2010,58(6):915-924
Seismic data acquired along rugged topographic surfaces present well‐known problems in seismic imaging. In conventional seismic data processing, datum statics are approximated by the surface consistence assumption, which states that all seismic rays travel vertically in the top layer. Hence, the datum static for each single trace is constant. In case this assumption does not apply, non‐constant statics are required. The common reflection surface (CRS) stack for rugged surface topography provides the capability to deal with this non‐vertical static issue. It handles the surface elevation as a coordinate component and treats the elevation variation in the sense of directional datuming. In this paper I apply the CRS stack method to a synthetic data set that simulates the acquisition along an irregular surface topography. After the CRS stack, by means of the wavefield attributes, a simple algorithm for redatuming the CRS stack section to an arbitrarily chosen planar surface is performed. The redatumed section simulates a stack section whose acquisition surface is the chosen planar surface. 相似文献
16.
近年来,油气勘探的重心正转向具有复杂地表和复杂地质体的双复杂区域.本文发展了一种精确的双复杂条件下基于地表倾角信息的非倾斜叠加束偏移方法,相对于传统束成像方法无需进行三方面处理:(1)高程静校正;(2)相位校正;(3)束中心与接收点之间关于速度和束出射角的近似替换,因而具有更高的成像精度.通过加拿大逆掩断层模型、中原油田断层模型及实际资料的偏移试算,并与传统束偏移及波动方程偏移成像结果对比可知:本文非近似束偏移方法在近地表、高陡倾等构造处的成像精度、反射界面成像振幅等方面优于传统的偏移方法,以此验证了本文非倾斜叠加精确束偏移方法的正确性、优越性及适应性. 相似文献
17.
Emile A. Okal 《Pure and Applied Geophysics》2007,164(2-3):325-353
Following the recent reports by Yuan et al. (2005) of recordings of the 2004 Sumatra tsunami on the horizontal components of coastal seismometers in the Indian Ocean
basin, we build a much enhanced dataset extending into the Atlantic and Pacific Oceans, as far away as Bermuda and Hawaii,
and also expanded to five additional events in the years 1995–2006. In order to interpret these records quantitatively, we
propose that the instruments are responding to the combination of horizontal displacement, tilt and perturbation in gravity
described by Gilbert (1980), and induced by the passage of the progressive tsunami wave over the ocean basin. In this crude approximation, we
simply ignore the island or continent structure, and assume that the seismometer functions de facto as an ocean-bottom instrument. The records can then be interpreted in the framework of tsunami normal mode theory,and lead
to acceptable estimates of the seismic moment of the parent earthquakes. We further demonstrate the feasibility of deconvolving
the response of the ocean floor in order to reconstruct the time series of the tsunami wave height at the surface of the ocean,
suggesting that island or coastal continental seismometers could complement the function of tsunameters. 相似文献
18.
可用于复杂地质体的波动方程基准面技术 总被引：7，自引：7，他引：0
提出改进的波动方程基准面方法,用于解决地表一致性问题,通过基准面的下移,可以使深部的信号增强,变多值走时为单值走时,从根本上消除了上覆层速度横向不均匀的影响,从而可以更好地解决复杂地质体成像问题。作者从原理上对上述观点给予了证明,而且给出利用波动方程基准面有限差分法做的实例－－大庆油田“陆相断隐模型”。 相似文献
19.
如何正确地消除复杂地表对地震波场的影响，提高地下构造成像的质量一直是中国西部复杂地区地震勘探中存在的难题.本文在三维复杂表层速度模型层析反演\[1\]的基础上，研究了关于复杂地表的静校正问题，提出用三维波动方程在炮集上对地震波场进行正、反向延拓，消除复杂地表对波场的影响，实现三维复杂表层模型校正.理论和实际应用证明，该方法已超越常规静校正的含义，属时变校正方法.用本方法处理复杂地表问题，不但能消除表层对不同深度反射波产生的不同时差影响，提高叠加剖面质量，而且能使校正后的地震波场保持波动特征不发生畸变，可为建立正确的深层速度模型和波动方程叠前深度偏移奠定良好的基础. 相似文献
20.
We apply interferometric theory to solve a three‐dimensional seismic residual statics problem to improve reflection imaging. The approach calculates the static solutions without picking the first arrivals from the shot or receiver gathers. The static correction accuracy can be significantly improved by utilising stacked virtual refraction gathers in the calculations. Shots and receivers may be placed at any position in a three‐dimensional seismic land survey. Therefore, it is difficult to determine stationary shots and receivers to form the virtual refraction traces that have identical arrival times, as in a two‐dimensional scenario. To overcome this problem, we use a three‐dimensional super‐virtual interferometry method for residual static calculations. The virtual refraction for a stationary shot/receiver pair is obtained via an integral along the receiver/shot lines, which does not require knowledge of the stationary locations. We pick the maximum energy times on the interferometric stacks and solve a set of linear equations to derive reliable residual static solutions. We further apply the approach to both synthetic and real data. 相似文献