共查询到20条相似文献，搜索用时 46 毫秒
1.
横向各向同性介质是地层中普遍存在的一种各向异性介质.本文对径向分层TI孔隙介质包围井孔中激发的斯通利波和弯曲波的传播特性进行了理论计算,发现模式波在低频时更多的是反应原状地层的信息,而随着频率的增加侵入带参数逐渐起控制作用;Biot理论描述的地层衰减比速度更容易受井壁附近地层参数的影响.利用灵敏度曲线定量研究了不同频率下地层各个参数对相速度和衰减系数的贡献大小,主要结果显示模式波的衰减受水平渗透率影响明显,而垂直渗透率的变化对模式波几乎无影响;斯通利波对水平向传播的横波速度比弯曲波的灵敏度高.从单极子和偶极子声源在井孔中激发的全波波形也可发现,声波测井仪器较宽的声源频带和合适的源距设置有利于对不同径向深度上的地层声学参数进行成像. 相似文献
2.
The porosity may be overestimated or underestimated when calculated from conventional logs and also underestimated when derived
from nuclear magnetic resonance (NMR) logs due to the effect of the lower hydrogen index of natural gas in gas-bearing sandstones.
Proceeding from the basic principle of NMR log and the results obtained from a physical rock volume model constructed on the
basis of interval transit time logs, a technique of calculating porosity by combining the NMR log with the conventional interval
transit time log is proposed. For wells with the NMR log acquired from the MRIL-C tool, this technique is reliable for evaluating
the effect of natural gas and obtaining accurate porosity in any borehole. In wells with NMR log acquired from the CMR-Plus
tool and with collapsed borehole, the NMR porosity should be first corrected by using the deep lateral resistivity log. Two
field examples of tight gas sandstones in the Xujiahe Formation, central Sichuan basin, Southwest China, illustrate that the
porosity calculated by using this technique matches the core analyzed results very well. Another field example of conventional
gas-bearing reservoir in the Ziniquanzi Formation, southern Junggar basin, Northwest China, verifies that this technique is
usable not only in tight gas sandstones, but also in any gas-bearing reservoirs. 相似文献
3.
The Coulomb charges method is used to model apparent resistivity measurements carried out in layered geological formations with a borehole using various devices. It is characterized by a high level of effectiveness and accuracy. The results are compared with the theoretical solutions for a homogenous medium with the borehole and invaded zone for point current source lateral devices. The relative error was less than 2% for different values of the range of the invaded zone and resistivity of invaded and true resistivity of formation. 相似文献
4.
《中国科学D辑(英文版)》2008,(Z2)
Studying the response differences between neutron and density logging of gas reservoir for well-balanced and under-balanced logging will be of significance in evaluation of gas reservoir under the under-balanced condition and application of logging data. With Monte Carlo simulation technique,the paper obtains the relationship between neutron and density logging measurement and borehole di-ameter,porosity or gas saturation for well-balanced and under-balanced logging. The conclusions show that the response trend of under-balanced logging to gas reservoirs agrees with that of well-balanced logging with small borehole,and under-balanced logging data can be used usually as well-balanced logging data. When borehole diameter is large,under-balanced logging data should be corrected for the influences of borehole. 相似文献
5.
New Methods for Modeling Laterolog Resistivity Corrections 总被引：1，自引：1，他引：0
Jadwiga Anna Jarzyna Adam Cichy Dezső Drahos Attila Galsa Maria Joanna Bała Andrzej Ossowski 《Acta Geophysica》2016,64(2):417-442
The paper presents methods for laterolog response modeling. In Coulomb’s charges method, Laplace’s equation is solved for the electric field distribution in rock medium with internal boundaries between different resistivity layers. There, the boundary problem is reduced to Fred-holm integral equation of the second kind. The second method uses a finite element array to model apparent resistivity from laterolog. The task is treated as DC problem and the Laplace equation is solved numerically. The presented methods were applied to borehole data covering a typical stratigraphie section of the Fore-Sudetic Monocline in southwestern Poland. Apparent resistivity was calculated using the Coulomb’s charges method and alternatively modeled using a finite element method which gave similar results. Then, a series of linear corrections for borehole, shoulder bed, and filtration effects for apparent resistivity obtained by the Coulomb’s charges method demonstrated the feasibility of calculating true resistivity of virgin and invaded zones. The proposed methods provide a flexible solution in modeling which can be adapted to other logs. 相似文献
6.
PNN测井方法的蒙特卡罗模拟结果研究 总被引：3，自引：0，他引：3
PNN（脉冲中子-中子）测井是利用He-3管记录热中子时间谱，通过获取地层宏观吸收截面来确定含水饱和度的方法.本文利用蒙特卡罗方法（MCNP-4C）模拟了不同地层水矿化度、孔隙度、饱和度和井眼等条件下的热中子时间谱，研究了地层宏观吸收截面与地层水矿化度的关系，从理论上确定PNN测井适合的地层水矿化度范围约为10～100 g/L，在地层水矿化度为50 g/L时适于测井的孔隙度下限约为10%.井眼流体不同，地层的热中子计数率不同，但对地层宏观吸收截面影响较小.利用远近探测器热中子计数比值可以确定孔隙度，并提出了根据不同岩性和饱和度的地层宏观吸收截面与孔隙度的交会图来评价骨架、含水饱和度以及确定油层、水层和气层的方法.PNN测井方法在低地层水矿化度、低孔隙度地层比其他方法具有优势. 相似文献
7.
松辽盆地深层火山岩含气储层产能预测 总被引：9，自引：4，他引：5
松辽盆地深层火山岩是当前大庆地球物理、地质、地球化学研究的主要领域之一,已取得丰硕的成果,火成岩含气储层产能作为一个表示动态特征的参数,是储层评价的重要指标之一,本文讨论了火成岩含气储层的产能与测井响应之间的关系,探讨了根据测井资料应用人工神经网络技术预测火成岩含气储层产能的方法,利用已知气井测试结果和测井资料作为网络的训练样本,根据网络学习训练结果,输入测井资料等静态参数,可预测储集层的产能,根据这种关系采用神经网络技术实现了测井对产能的预测评价,从而为大庆深部火成岩含气储层的开发提供了一定的依据。 相似文献
8.
Elastic behaviour of North Sea chalk: A well-log study 总被引：1，自引：1，他引：0
L. Gommesen I.L. Fabricius T. Mukerji G. Mavko J.M. Pedersen 《Geophysical Prospecting》2007,55(3):307-322
We present two different elastic models for, respectively, cemented and uncemented North Sea chalk well‐log data. We find that low Biot coefficients correlate with anomalously low cementation factors from resistivity measurements at low porosity and we interpret this as an indication of cementation. In contrast, higher Biot coefficients and correspondingly higher cementation factors characterize uncemented chalk for the same (low) porosity. Accordingly, the Poisson's ratio–porosity relationship for cemented chalk is different from that of uncemented chalk. We have tested the application of the self‐consistent approximation, which here represents the unrelaxed scenario where the pore spaces of the rock are assumed to be isolated, and the Gassmann theory, which assumes that pore spaces are connected, as tools for predicting the effect of hydrocarbons from the elastic properties of brine‐saturated North Sea reservoir chalk. In the acoustic impedance–Poisson's ratio plane, we forecast variations in porosity and hydrocarbon saturation from their influence on the elastic behaviour of the chalk. The Gassmann model and the self‐consistent approximation give roughly similar predictions of the effect of fluid on acoustic impedance and Poisson's ratio, but we find that the high‐frequency self‐consistent approach gives a somewhat smaller predicted fluid‐saturation effect on Poisson's ratio than the low‐frequency Gassmann model. The Gassmann prediction for the near and potentially invaded zone corresponds more closely to logging data than the Gassmann prediction for the far, virgin zone. We thus conclude that the Gassmann approach predicts hydrocarbons accurately in chalk in the sonic‐frequency domain, but the fluid effects as recorded by the acoustic tool are significantly affected by invasion of mud filtrate. The amplitude‐versus‐angle (AVA) response for the general North Sea sequence of shale overlying chalk is predicted as a function of porosity and pore‐fill. The AVA response of both cemented and uncemented chalk generally shows a declining reflectivity coefficient versus offset and a decreasing normal‐incidence reflectivity with increasing porosity. However, for the uncemented model, a phase reversal will appear at a relatively lower porosity compared to the cemented model. 相似文献
9.
Laura Carmine Elsa Aristodemou Christopher Pain Ann Muggeridge Cassiano de Oliveira 《Geophysical Prospecting》2008,56(1):115-140
The purpose of this work was to investigate a new and fast inversion methodology for the prediction of subsurface formation properties such as porosity, salinity and oil saturation, using time‐dependent nuclear well logging data. Although the ultimate aim is to apply the technique to real‐field data, an initial investigation as described in this paper, was first required; this has been carried out using simulation results from the time‐dependent radiation transport problem within a borehole. Simulated neutron and γ‐ray fluxes at two sodium iodide (NaI) detectors, one near and one far from a pulsed neutron source emitting at ～14 MeV, were used for the investigation. A total of 67 energy groups from the BUGLE96 cross section library together with 567 property combinations were employed for the original flux response generation, achieved by solving numerically the time‐dependent Boltzmann radiation transport equation in its even parity form. Material property combinations (scenarios) and their correspondent teaching outputs (flux response at detectors) are used to train the Artificial Neural Networks (ANNs) and test data is used to assess the accuracy of the ANNs. The trained networks are then used to produce a surrogate model of the expensive, in terms of computational time and resources, forward model with which a simple inversion method is applied to calculate material properties from the time evolution of flux responses at the two detectors. The inversion technique uses a fast surrogate model comprising 8026 artificial neural networks, which consist of an input layer with three input units (neurons) for porosity, salinity and oil saturation; and two hidden layers and one output neuron representing the scalar photon or neutron flux prediction at the detector. This is the first time this technique has been applied to invert pulsed neutron logging tool information and the results produced are very promising. The next step in the procedure is to apply the methodology to real data. 相似文献
10.
Response simulation and theoretical calibration of a dual-induction resistivity LWD tool 总被引：1，自引：1，他引：0
In this paper, responses of a new dual-induction resistivity logging-while-drilling （LWD） tool in 3D inhomogeneous formation models are simulated by the vectorfinite element method （VFEM）, the influences of the borehole, invaded zone, surroundingstrata, and tool eccentricity are analyzed, and calibration loop parameters and calibrationcoefficients of the LWD tool are discussed. The results show that the tool has a greater depthof investigation than that of the existing electromagnetic propagation LWD tools and is moresensitive to azimuthal conductivity. Both deep and medium induction responses have linearrelationships with the formation conductivity, considering optimal calibration loop parametersand calibration coefficients. Due to the different depths of investigation and resolution, deepinduction and medium induction are affected differently by the formation model parameters,thereby having different correction factors. The simulation results can provide theoreticalreferences for the research and interpretation of the dual-induction resistivity LWD tools. 相似文献
11.
根据鄂尔多斯盆地苏里格气田以往实测和新测的共17口井51块岩样超声波实验数据,得到304组不同孔隙度和不同含水饱和度下对应的纵横波速度、泊松比等弹性参数.重新优选计算体积模量和泊松比与含气饱和度的关系,表明苏里格气田上古生界二叠系石盒子组盒8致密砂岩储层的模型与Brie模型(e=2)相似度最高.由此建立的苏里格气田储层岩石物理模型,更好的表征了致密岩石储层物理参数随含气饱和度变化规律,为该区储层预测提供了理论依据.致密储层岩石物理模型研究成果应用于苏里格气田多波地震资料气水预测中,实际例子表明该模型适用于该区的储层和含气性预测,并取得了较好的效果. 相似文献
12.
利用数值模式匹配技术,研究并建立层状各向异性倾斜地层中多分量感应测井响应的快速数值模拟算法.首先将位于井轴上的三个相互正交磁偶极子转化成关于极角θ的三个谐变分量的叠加,以便将三个正交磁偶极子电磁场的正演问题完全简化成三个谐变分量电磁场的轴对称定解问题,并给出电磁场各个谐变分量在井轴上满足的边界条件,保证电磁场在井轴附近仍然可解.然后利用数值模式匹配技术建立电磁场各个谐变分量的正演过程,得到层状各向异性地层中磁流源并矢Green函数的半解析表达式,给出计算层状各向异性倾斜地层中多分量感应测井响应的具体方法,最后通过数值计算结果证明该算法的有效性并考察几种不同情况下多分量感应测井响应特征. 相似文献
13.
John H. Kramer Stephen J. Cullen Lome G. Everett 《Ground Water Monitoring & Remediation》1992,12(3):177-187
The neutron moisture probe is widely applicable to vadose zone monitoring problems which require measuring variable moisture contents. Neutron data are proportional to hydrogen density (modified by local chemistry) and sensitive to wetting fronts as well as changing volumes of hydrocarbon liquids. They cannot, however, be used to confirm contaminant chemistry, nor to detect steady-state flow. Neutron data are amenable to statistical analysis, providing a measure of the significance of data variations. Detection of incipient moisture changes at numerous monitoring locations is more practical using raw neutron data than data calibrated for moisture content because calibrations suffer from uncertainties associated with soil heterogeneities. When properly applied, the neutron probe is an effective monitoring tool as illustrated by three example applications described in this paper: (1) neutron moisture logs are used to detect subtle lithologic changes and identify monitoring horizons; (2) sequential neutron data are used to track induced saturation at a soil flushing pilot study; and (3) neutron logs from a horizontal access tube beneath a waste facility are used to pinpoint moisture anomalies. 相似文献
14.
Borehole direct current (dc) resistivity problems are solved using finite difference method (FDM) primarily to extend the log interpretation in the two-dimensional (2D) domain. Transitional invaded zone, flushed zone, uncontaminated zone, shoulder beds and borehole filled with mud are simulated simultaneously in the model. Linear variation of resistivity is assumed for transitional invaded zone. Normal, lateral and modified laterolog7 (LL74) electrode configuration (discussed in the text) responses were computed using expanding rectangular grid system. LL74 responses with variable geometric factor did show some superiority over the conventional normal and lateral for conductive target beds sandwiched between the resistive beds. For relatively small borehole diameter, all three probes can detect resistive target bed satisfactorily. However, for highly conductive mud both LL74 and normal electrode configuration fail to detect any signal from the target bed. Bypassing effect of the current for LL74 is more than that in normal log. Lateral log shows a signal of conductive invaded zone generated by the conductive mud. Bucking current ratio peaks and the geometric factor peaks in LL74 can detect the bed boundaries. 相似文献
15.
采用改进型逐次逼近解法(MSAM)和Aitken加速技术相结合的迭代算法计算二维积分方程.该算法将纵向成层原状地层作为背景地层,将计算区域限制在井眼和侵入带内,具有未知量数目少、收敛速度快、计算精度高的优点.利用该算法对随钻电磁波电阻率测量仪器在轴对称二维地层中的响应进行数值模拟.模拟结果显示,幅度衰减曲线和相位移曲线受井眼、侵入和围岩的影响程度不同,二者径向探测深度和垂向分辨率也有差异,利用补偿后的幅度衰减电阻率曲线和相位移电阻率曲线交叉点的坐标可精确确定地层层界面位置. 相似文献
16.
Elaine M. FitzGerald Christopher J. Bean & Ronan Reilly 《Geophysical Prospecting》1999,47(6):1031-1044
Borehole-wall imaging is currently the most reliable means of mapping discontinuities within boreholes. As these imaging techniques are expensive and thus not always included in a logging run, a method of predicting fracture frequency directly from traditional logging tool responses would be very useful and cost effective. Artificial neural networks (ANNs) show great potential in this area. ANNs are computational systems that attempt to mimic natural biological neural networks. They have the ability to recognize patterns and develop their own generalizations about a given data set. Neural networks are trained on data sets for which the solution is known and tested on data not previously seen in order to validate the network result. We show that artificial neural networks, due to their pattern recognition capabilities, are able to assess the signal strength of fracture-related heterogeneity in a borehole log and thus fracture frequency within a borehole. A combination of wireline logs (neutron porosity, bulk density, P-sonic, S-sonic, deep resistivity and shallow resistivity) were used as input parameters to the ANN. Fracture frequency calculated from borehole televiewer data was used as the single output parameter. The ANN was trained using a back-propagation algorithm with a momentum learning function. In addition to fracture frequency within a single borehole, an ANN trained on a subset of boreholes in an area could be used for prediction over the entire set of boreholes, thus allowing the lateral correlation of fracture zones. 相似文献
17.
采用偏心状态下柱状成层各向异性(横向各向同性)介质中并矢Green函数的解析表达式高效模拟多分量感应测井仪器在井眼中偏心时的响应.为提高精度,在模拟时考虑到了金属心轴、绝缘保护层的存在以及各分量线圈系的具体形状.数值模拟结果表明,当井眼内钻井液电导率相对较高、地层电导率相对较低时,偏心对仪器响应的影响较大,尤其是对短线圈距线圈系的影响更为明显,必须进行偏心效应校正.当钻井液电导率相对较低时,偏心对线圈系响应的影响可忽略不计.对位于相对低电导率井眼中的线圈系而言仪器方位角的影响可忽略不计,而当线圈系位于相对高电导率井眼中时仪器方位角的影响极为明显.当仪器偏心率较小时线圈系的响应随仪器方位角的变化较小,仪器偏心率越大线圈系的响应随仪器方位角的变化越明显. 相似文献
18.
A test-stand experiment was conducted on neutron probe measurements using steel and Schedule 40 PVC access tubes to determine the effect of backfill grout in boreholes. The experiment used a moveable simulated vadose zone. Access tubes and grout do have masking effects on vadose zone measurements, but vadose zone moisture was detected through all configurations tested. Steel tubing has a smaller masking effect than PVC tubing. The masking effect of grout increased with borehole diameter. Although this experiment produced numerical results, conclusions drawn are qualitative in nature, rather than a quantitative calibration of the technique. 相似文献
19.
The fate and transport of contaminants in the vicinity of septic fields remains poorly understood in many hydrogeomorphological environments. We report hydrometric data from an intensive hillslope‐scale experiment conducted between 29 August and 11 November 1998 at a residential leach field in New York State. The objective of our study was to characterize water flux within the vadose zone, understand the physical controls on the flux, and predict how this ultimately will affect subsurface water quality. Soil‐water flux was calculated using matric potential measurements from a network of 25 tensiometer nests, each nest consisting of three tensiometers installed to depths of 10, 50 and 130 cm. Unsaturated hydraulic conductivity curves were derived at each depth from field‐determined time‐domain reflectometry–tensiometry moisture‐release curves and borehole permeametry measurements. Flownets indicated that a strong upward flux of soil water occurred between rainstorms. Following the onset of (typically convective) rainfall, low near‐surface matric potentials were rapidly converted to near‐saturated and saturated conditions, promoting steep vertical gradients through the near‐surface horizons of the hillslope. Lateral hydraulic gradients were typically 10 times smaller than the vertical gradients. Resultant flow vectors showed that the flux was predominantly vertical through the vadose zone, and that the flux response to precipitation was short‐lived. The flux response was controlled primarily by the shape of the unsaturated hydraulic conductivity curves, which indicated a rapid loss of conductivity below saturation. Thus, soil water had a very high residence time in the vadose zone. The absence of rapid wetting at 130 cm and the delayed and small phreatic zone response to rainfall indicated that water movement through macropores did not occur on this hillslope. These results are consistent with a Cl tracing experiment, which demonstrated that the tracer was retained in the vadose zone for several months after injection to the system. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
20.
Long-term temperature monitoring in a borehole drilled into the Nojima Fault, southwest Japan 总被引：2，自引：0，他引：2
Abstract Long-term monitoring of temperature distribution in an active fault zone was carried out using the optical fiber temperature-sensing technique. An optical fiber cable was installed in a borehole drilled into the Nojima Fault in Awaji Island, south-west Japan, and the temperature profile to a depth of 1460 m had been measured for 2.5 years (July 1997–January 2000). Although the obtained temperature records showed small temporal variations due to drifts of the measurement system all along the cable, local temperature anomalies were detected at two depths. One at around 80 m seems to correspond to a fracture zone and may be attributed to groundwater flow in the fracture zone. This anomaly had been stable throughout the monitoring period, whereas the other anomaly at around 500 m was a transient one. The water level in the borehole could be estimated from the diurnal temperature variations in the uppermost part of the borehole and may provide information on the hydrological characteristics of the fault zone, which is connected to the borehole through perforations on the casing pipe. Except for these minor variations, the temperature profile had been very stable for 2.5 years. The conductive heat flow calculated from this profile and the thermal conductivity measured on core samples increases with depth, probably resulting from errors in thermal conductivity due to sampling problems and/or from advective heat transfer by regional groundwater flow. Assuming that the middle part of the borehole (less fractured granite layer) is least affected by these factors, heat flow at this site is estimated to be approximately 70 mW/m2 . 相似文献