共查询到20条相似文献，搜索用时 31 毫秒
1.
This paper investigates the two‐dimensional flow problem through an anisotropic porous medium containing several intersecting curved fractures. First, the governing equations of steady‐state fluid flow in a fractured porous body are summarized. The flow follows Darcy's law in matrix and Poiseuille's law in fractures. An infinite transversal permeability is considered for the fractures. A multi‐region boundary element method is used to derive a general pressure solution as a function of discharge through the fractures and the pressure and the normal flux on the domain boundary. The obtained solution fully accounts for the interaction and the intersection between fractures. A numerical procedure based on collocation method is presented to compute the unknowns on the boundaries and on the fractures. The numerical solution is validated by comparing with finite element solution or the results obtained for an infinite matrix. Pressure fields in the matrix are illustrated for domains containing several interconnected fractures, and mass balance at the intersection points is also checked. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
2.
This paper presents a fracture mapping (FM) approach combined with the extended finite element method (XFEM) to simulate coupled deformation and fluid flow in fractured porous media. Specifically, the method accurately represents the impact of discrete fractures on flow and deformation, although the individual fractures are not part of the finite element mesh. A key feature of FM‐XFEM is its ability to model discontinuities in the domain independently of the computational mesh. The proposed FM approach is a continuum‐based approach that is used to model the flow interaction between the porous matrix and existing fractures via a transfer function. Fracture geometry is defined using the level set method. Therefore, in contrast to the discrete fracture flow model, the fracture representation is not meshed along with the computational domain. Consequently, the method is able to determine the influence of fractures on fluid flow within a fractured domain without the complexity of meshing the fractures within the domain. The XFEM component of the scheme addresses the discontinuous displacement field within elements that are intersected by existing fractures. In XFEM, enrichment functions are added to the standard finite element approximation to adequately resolve discontinuous fields within the simulation domain. Numerical tests illustrate the ability of the method to adequately describe the displacement and fluid pressure fields within a fractured domain at significantly less computational expense than explicitly resolving the fracture within the finite element mesh. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
3.
采用复合单元法建立了模拟裂隙多孔介质变饱和流动的数值模型。该模型具有以下特点：裂隙不需要离散成特定单元，而是根据几何位置插入到孔隙基质单元中形成复合单元；在复合单元中，分别建立裂隙流和孔隙基质流的计算方程，二者通过裂隙?基质界面产生联系并整合成复合单元方程；复合单元方程具有和常规有限单元方程相同的格式，因此，可以使用常规有限单元方程的求解技术。采用欠松弛迭代、集中质量矩阵以及自适应时步调节等技术，开发了裂隙多孔介质变饱和流动计算程序。通过模拟一维干土入渗和复杂裂隙含水层内的流动问题，验证了该模型的合理性和适用性。模拟结果为进一步认识非饱和裂隙含水层地下水流动特性提供了理论依据。 相似文献
4.
A numerical model is described for coupled flow and mechanical deformation in fractured rock. The mechanical response of rock joints to changes in hydraulic pressure is strongly influenced by the geometric characteristics of the joint surfaces. The concept of this work is to combine straightforward finite element solutions with complex and realistic fracture surface geometry in order to reproduce the non-linear stress-deformation-permeability coupling that is commonly observed in fractures. Building on the numerous studies that have expanded the understanding of the key parameters needed to describe natural rough-walled fractures, new methods have been developed to generate a finite element mesh representing discrete fractures with realistic rough surface geometries embedded in a rock matrix. The finite element code GeoSys/Rockflow was then used to simulate the coupled effects of hydraulic stress, mechanical stress, and surface geometry on the evolving permeability of a single discrete fracture. The modeling concept was experimentally verified against examples from the literature. Modeling results were also compared to a simple interpenetration model. 相似文献
5.
无限元是一种有效的人工边界,可用于处理弹性波的传播问题。在传统动力无限元的基础上,提出了一种采用分向插值技术的新型动力无限元,详细地推导了这种无限元的形函数,建立了完全解析形式的刚度矩阵,以提高计算效率,采用该无限元边界,计算了弹性介质中的线源Lamb问题,通过对比解析解答的地基表面位移,验证了该无限元的有效性。算例分析表明,采用此类无限元时,有限元单元边长建议取不超过1/8剪切波波长,网格边界到激励源点的距离宜取5倍剪切波波长。无限单元中的幅值衰减系数对计算结果影响甚微,建议取较小值。 相似文献
6.
7.
Discrete fracture model for simulating waterflooding processes under fracturing conditions 
下载免费PDF全文
下载免费PDF全文 In our study, we develop a model for simulating fracturing processes in a poroelastic medium. The proposed approach combines the discrete fracture model enriched with contact plane mechanics. The model captures mechanical interactions of fractures and a deformable medium, fluid, and heat transfer in fractures and in a porous medium. Both effects of poroelasticity and thermoelasticity are accounted in our model. Mass and heat conservation equations are approximated by the finite volume method, and mechanical equilibrium equations are discretized by means of the Galerkin finite element approach. Two‐dimensional grid facets between 3‐dimensional finite elements are considered as possible fracture surfaces. Most of these facets are inactive from the beginning and are activated throughout the simulation. A fracture propagation criterion, based on Irwin's approach, is verified on each nonlinear iteration. When the criterion is satisfied, additional contact elements are added into finite element and discrete fracture model formulations respectively. The proposed approach allows modeling of existing natural and artificially created fractures within one framework. The model is tested on single‐ and multiple‐phase fluid flow examples for both isothermal and thermal conditions and verified against existing semianalytical solutions. The applicability of the approach is demonstrated on an example of practical interests where a sector model of an oil reservoir is simulated with different injection and production regimes. 相似文献
8.
This paper presents a composite element algorithm of coupled normal stress and fluid flow process for fractured rock mass, developed from the composite element method (CEM). The coupled relation between the fracture flow and normal stress makes use of the “filled model”, which examines the asperities in the fracture as a layer of granular medium having high porosity and being clipped by the two parallel plates. The existence of fractures is not considered in the mesh generation, but it will be considered explicitly in the mapped composite element. The coupled normal stress and fluid flow process has been simulated by applying a cross iterative algorithm between the two fields. The proposed algorithm considers not only the flow through the fractures, but also the flow exchange between fractures and the surrounding rock blocks. In addition, it can be used for both the filled and non-filled fractures. The verification of the proposed algorithm has been conducted through the illustration of three examples by comparison with the conventional finite element method (FEM), from which the advantages and reliability of the proposed algorithm have been shown clearly. 相似文献
9.
In modeling of many geomechanics problems such as underground openings, soil-foundation structure interaction problems, and in wave propagation problems through semi-infinite soil medium the soil is represented as a region of either infinite or semi-infinite extent. Numerical modeling of such problems using conventional finite elements involves a truncation of the far field in which the infinite boundary is terminated at a finite distance. In these problems, appropriate boundary conditions are introduced to approximate the solution of the infinite or semi-infinite boundaries as closely as possible. However, the task of positioning the finite boundary in conventional finite element discretization and the definition of the boundary and its conditions is very delicate and depends on the modeller's skill and intuition. Moreover, such a choice is influenced by the size of the domain to be discretized. Consequently, the dimensions of the global matrices and the time required for solution of the problem will increase considerably and also selection of the arbitrary location of truncated boundary may lead to erroneous result. In order to over come these problems, mapped infinite elements have been developed by earlier researchers (Simoni and Schrefier, 1987). In the present work the applicability of infinite element technique is examined for different geomechanics problems. A computer program INFEMEP is developed based on the conventional finite element and mapped infinite element technique. It is then validated using selected problems such as strip footing and circular footing. CPU time taken to obtain solutions using finite element approach and infinite element approach was estimated and presented to show the capability of coupled modeling in improving the computational efficiency. Mesh configurations of different sizes were used to explore the enhancement of both computational economy and solution accuracy achieved by incorporation of infinite elements to solve elastic and elasto-plastic problems in semi-infinite/finite domain as applied to geotechnical engineering. © Rapid Science Ltd. 1998 相似文献
10.
11.
Simulation of fracturing processes in porous rocks can be divided into two main branches: (i) modeling the rock as a continuum enhanced with special features to account for fractures or (ii) modeling the rock by a discrete (or discontinuous) approach that describes the material directly as a collection of separate blocks or particles, e.g., as in the discrete element method (DEM). In the modified discrete element (MDEM) method, the effective forces between virtual particles are modified so that they reproduce the discretization of a first-order finite element method (FEM) for linear elasticity. This provides an expression of the virtual forces in terms of general Hook’s macro-parameters. Previously, MDEM has been formulated through an analogy with linear elements for FEM. We show the connection between MDEM and the virtual element method (VEM), which is a generalization of FEM to polyhedral grids. Unlike standard FEM, which computes strain-states in a reference space, MDEM and VEM compute stress-states directly in real space. This connection leads us to a new derivation of the MDEM method. Moreover, it enables a direct coupling between (M)DEM and domains modeled by a grid made of polyhedral cells. Thus, this approach makes it possible to combine fine-scale (M)DEM behavior near the fracturing region with linear elasticity on complex reservoir grids in the far-field region without regridding. To demonstrate the simulation of hydraulic fracturing, the coupled (M)DEM-VEM method is implemented using the Matlab Reservoir Simulation Toolbox (MRST) and linked to an industry-standard reservoir simulator. Similar approaches have been presented previously using standard FEM, but due to the similarities in the approaches of VEM and MDEM, our work provides a more uniform approach and extends these previous works to general polyhedral grids for the non-fracturing domain. 相似文献
12.
Lanru Jing 《Engineering Geology》1998,49(3-4):371-381
Continuum-based numerical methods have played a leading role in the numerical solution of problems in rock mechanics and engineering geology. However, for fractured rocks, a continuum assumption often leads to difficult parameters to define and over-simplified geometry to be realistic. In such case, discrete representations of fractures and individual blocks must be adopted. In this paper, a newly emerged member in the family of discrete element methods (DEM), the discontinuous deformation analysis (DDA), is presented, including its variational principle, governing equations, solution techniques and contact representation and detection algorithms. Its relative advantages and shortcomings are compared with the explicit distinct element method and the finite element method. An example of the analysis of tunnel stability is provided to demonstrate the capability of this new method. 相似文献
13.
Giuseppe Gambolati Massimiliano Ferronato Pietro Teatini Roberto Deidda Giuditta Lecca 《国际地质力学数值与分析法杂志》2001,25(4):307-327
The solution of the poroelastic equations for predicting land subsidence above productive gas/oil fields may be addressed by the principle of virtual works using either the effective intergranular stress, with the pore pressure gradient regarded as a distributed body force, or the total stress incorporating the pore pressure. In the finite element (FE) method both approaches prove equivalent at the global assembled level. However, at the element level apparently the equivalence does not hold, and the strength source related to the pore pressure seems to generate different local forces on the element nodes. The two formulations are briefly reviewed and discussed for triangular and tetrahedral finite elements. They are shown to yield different results at the global level as well in a three‐dimensional axisymmetric porous medium if the FE integration is performed using the average element‐wise radius. A modification to both formulations is suggested which allows to correctly solve the problem of a finite reservoir with an infinite pressure gradient, i.e. with a pore pressure discontinuity on its boundary. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
14.
This paper presents a generalized procedure for the identification of rock blocks formed by finite‐sized fractures around complex excavations. It was assumed that the study domain could be partitioned into a finite number of subdomains, where each either was, or could be, approximated by a convex polyhedron, and the fractures were finite in size and disc shaped and were defined using the location of the disc center, orientation, radius, cohesion coefficient, and friction angle. These may be either deterministic fractures obtained from a field survey or random fractures generated by stochastic modeling. In addition, the rock mass could be heterogeneous; i.e. the rock matrix and individual fractures could have different parameters in different parts. The procedure included: (1) partitioning of the model domain into convex subdomains; (2) removing noncontributive fractures. A fracture was deemed contributive when it played a part in block formation; i.e. it formed at least one surface with some of the blocks; (3) decomposing the subdomains into element blocks with fractures; (4) restoring the infinite fractures to finite discs; and (5) assembling the modeling domain. Our procedure facilitates robust computational programming, and is flexible in dealing with the problem of a complex study domain and with rock heterogeneity. A computer code was developed based on the algorithm developed in this study. The algorithm and computer program were verified using an analytical method, and were used to solve the problem of block prediction around the underground powerhouse of the Three Gorges Project. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
15.
Block detection is one of the important steps in all discontinuous methods of analysis such as discontinuous deformation analysis and discrete element method. It is in fact a pre‐processing step for these methods. This paper describes a new approach to the problem of geometrically defining polyhedral rock blocks created by the intersection of planar discontinuities in a rock mass. An approach is developed based on the concept of using matrices with integer elements that mostly represent vertices, edges, or face numbers and their connections. Using square matrices with integer elements and performing edge/face regularization reduce the size of the matrices because of elimination of unnecessary faces, edges, and vertices; speed and accuracy of block tracing operation will be increased. This algorithm is able to trace and identify all kinds of blocks including convex and concave blocks formed by limited or unlimited fractures. The simplicity of the procedure makes it very attractive. The algorithm was programmed in C#.Net by over 8100 code lines; several examples are presented to show application of the algorithm in different situations. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
16.
针对地表超载作用下隧道稳定性和破坏模式问题,基于刚体平动运动单元上限有限元理论编程并计算分析,获得了浅埋隧道失稳临界超载系数上限解和刚性运动块体体系破坏模式。通过与现有的刚性块体极限分析上限法以及极限分析上、下限有限元法计算结果的对比分析,验证了上限解的可靠性。研究结果表明,（1）临界超载系数 黏聚力c之比 随土体内摩擦角 和隧道埋深C与直径D之比( )的增大而相应增大,随土体重度与黏聚力参数 的增大而减小;（2） 和 对隧道破坏模式的影响较明显; 增大,则隧道破坏范围增加;内摩擦角 增大,刚性运动块体破坏模式相互错动更加显著,相比而言, 对破坏模式的影响并不显著;（3）刚体平动运动单元上限有限元上限解精度高,所得刚性运动块体破坏模式具有滑移线形态,能精细地反映隧道失稳破坏特征。 相似文献
17.
A challenging computational problem arises when a discrete structure (e.g. foundation) interacts with an unbounded medium (e.g. deep soil deposit), particularly if general loading conditions and non‐linear material behaviour is assumed. In this paper, a novel method for dealing with such a problem is formulated by combining conventional three‐dimensional finite‐elements with the recently developed scaled boundary finite‐element method. The scaled boundary finite‐element method is a semi‐analytical technique based on finite‐elements that obtains a symmetric stiffness matrix with respect to degrees of freedom on a discretized boundary. The method is particularly well suited to modelling unbounded domains as analytical solutions are found in a radial co‐ordinate direction, but, unlike the boundary‐element method, no complex fundamental solution is required. A technique for coupling the stiffness matrix of bounded three‐dimensional finite‐element domain with the stiffness matrix of the unbounded scaled boundary finite‐element domain, which uses a Fourier series to model the variation of displacement in the circumferential direction of the cylindrical co‐ordinate system, is described. The accuracy and computational efficiency of the new formulation is demonstrated through the linear elastic analysis of rigid circular and square footings. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
18.
19.
裂隙岩体一般块体理论初步 总被引：9，自引：0，他引：9
本文在前人工作的基础上提出了一种通用方法解决任意大小裂隙、任意形状工程岩体的岩石块体识别及稳定性计算问题。在这一方法中裂隙既可以是实测裂隙也可以是通过随机模拟方法生成的随机裂隙,工程岩体可以是任意由多面体组合成的形状,如复杂边坡或地下洞室,而且岩体和裂隙面可以是非均质的。这一通用过程被称为一般块体理论。它克服了关键块体理论(或楔形体法)中存在的弱点:即把裂隙假设为无限大的不连续面,因此无法预测岩石块体的数量和位置,而且一般只能识别出简单形状的凸形体。它在块体识别的同时将复杂的块体分解为几个简单的凸形块体,从而使复杂块体的几何描述、体积及重力计算、力学分析、可视化表示等一系列问题大大简化。在对一公路边坡的裂隙进行了详细观测之后,利用本文的方法进行了块体识别和稳定性分析,对本文的研究进行初步的验证。 相似文献
20.
离散裂隙渗流方法与裂隙化渗透介质建模 总被引：4，自引：1，他引：4
流体渗流模拟的连续介质方法通常适用于多孔地质体，并不一定适用于裂隙岩体，由于裂隙分布及其特征与孔隙差异较大。若流体渗流主要受裂隙的控制，对于一定尺寸的裂隙岩体，多孔介质假设则较难刻划裂隙岩体的渗流特征。离散裂隙渗流方法不但可直接用于模拟裂隙岩体非均质性和各向异性等渗流特征，而且可用其确定所研究的裂隙岩体典型单元体及其水力传导（渗透）张量大小。主要讨论了以下问题：（1）饱和裂隙介质中一般的离散流体渗流模拟；（2）裂隙岩体中的REV（典型单元体）及其水力传导（渗透）张量的确定；（3）利用离散裂隙网络流体渗流模型研究裂隙方向几何参数对水力传导系数和REV的影响；（4）在二维和三维离散裂隙流体渗流模型中对区域大裂隙和局部小裂隙的处理方法。调查结果显示离散裂隙流体渗流数学模型可用来评价不同尺度上的裂隙岩体的水力特征，以及裂隙方向对裂隙化岩体的水力特征有着不可忽视的影响。同时，局部小裂隙、区域大裂隙应当区别对待，以便据其所起的作用及水力特征，建立裂隙化岩体相应的流体渗流模型。 相似文献