首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The objective of this study is to map landslide susceptibility in Zigui segment of the Yangtze Three Gorges area that is known as one of the most landslide-prone areas in China by using data from light detection and ranging (LiDAR) and digital mapping camera (DMC). The likelihood ratio (LR) and logistic regression model (LRM) were used in this study. The work is divided into three phases. The first phase consists of data processing and analysis. In this phase, LiDAR and DMC data and geological maps were processed, and the landslide-controlling factors were derived such as landslide density, digital elevation model (DEM), slope angle, aspect, lithology, land use and distance from drainage. Among these, the landslide inventories, land use and drainage were constructed with both LiDAR and DMC data; DEM, slope angle and aspect were constructed with LiDAR data; lithology was taken from the 1:250,000 scale geological maps. The second phase is the logistic regression analysis. In this phase, the LR was applied to find the correlation between the landslide locations and the landslide-controlling factors, whereas the LRM was used to predict the occurrence of landslides based on six factors. To calculate the coefficients of LRM, 13,290,553 pixels was used, 29.5 % of the total pixels. The logical regression coefficients of landslide-controlling factors were obtained by logical regression analysis with SPSS 17.0 software. The accuracy of the LRM was 88.8 % on the whole. The third phase is landslide susceptibility mapping and verification. The mapping result was verified using the landslide location data, and 64.4 % landslide pixels distributed in “extremely high” zone and “high” zone; in addition, verification was performed using a success rate curve. The verification result show clearly that landslide susceptibility zones were in close agreement with actual landslide areas in the field. It is also shown that the factors that were applied in this study are appropriate; lithology, elevation and distance from drainage are primary factors for the landslide susceptibility mapping in the area, while slope angle, aspect and land use are secondary.  相似文献   

2.
The mobility of gravity-driven granular flows such as debris flows or pyroclastic density currents are extremely sensitive to topographic changes, such as break in slopes, obstacles, or ravine deviations. In hazard assessment, computer codes can reproduce past events and evaluate hazard zonation based on inundation limits of simulated flows over a natural terrain. Digital Elevation Model (DEM) is a common input for the simulation algorithm and its accuracy to reproduce past flows is crucial. In this work, we use TITAN2D code to reproduce past block-and-ash flows at Colima volcano (Mexico) over DEMs with different cell size (5, 10, 30, 50, and 90 m) in order to illustrate the influences of the resolution on the numeric simulations. Our results show that topographic resolution significantly affects the flow path and runout. Also, we found that simulations of past flows with the same input parameters (such as the basal friction angle) over topography with different resolutions resulted in different flow paths, areas, and thickness of the simulated flows. In particular, the simulations performed with the 5- and 10-m DEMs produced similar results. Also, we obtained consistent simulation results for the 30- and 50-m DEMs. However, for the coarser 90-m DEM results are largely different and inaccurate. We recommend generating a benchmark table in order to acquire characteristic values for the basal friction angle of studied events. In case of rugged topographies, a DEM with high resolution should be used for more confident results.  相似文献   

3.
数字高程模型分辨率对流域地形特征参数的影响   总被引：2，自引：0，他引：2       下载免费PDF全文
地形特征(如高程和坡度)和水文特征(如河流长度和河流坡度)是分布式流域水文水质模型的基础输入参数,用于量化描述模型模拟流域的自然特征。这些特征参数的准确性直接影响水文水质过程模拟的准确性。应用数字高程模型(Digital Elevation Model,DEM)在4个不同地形的子流域研究了10种不同分辨率DEM对平均高程、流域面积、坡度、河流坡度、最长河长等参数的影响。结果表明,随着DEM分辨率降低,流域地形变缓,流域平均坡度逐渐减小;随着DEM网格分辨率的变化,子流域划分范围和河道位置也都可能发生变化,且该变化在地形起伏较小的丘陵平原地区较明显,子流域集水面积和河长进一步随之改变;河流坡度随DEM分辨率降低则呈无规则变化。从地形和水文参数两方面揭示了DEM 分辨率在分布式流域模型中的不确定性影响。  相似文献   

4.
The key to advancing the predictability of rainfall-triggered landslides is to use physically based slope-stability models that simulate the transient dynamical response of the subsurface moisture to spatiotemporal variability of rainfall in complex terrains. TRIGRS (transient rainfall infiltration and grid-based regional slope-stability analysis) is a USGS landslide prediction model, coded in Fortran, that accounts for the influences of hydrology, topography, and soil physics on slope stability. In this study, we quantitatively evaluate the spatiotemporal predictability of a Matlab version of TRIGRS (MaTRIGRS) in the Blue Ridge Mountains of Macon County, North Carolina where Hurricanes Ivan triggered widespread landslides in the 2004 hurricane season. High resolution digital elevation model (DEM) data (6-m LiDAR), USGS STATSGO soil database, and NOAA/NWS combined radar and gauge precipitation are used as inputs to the model. A local landslide inventory database from North Carolina Geological Survey is used to evaluate the MaTRIGRS’ predictive skill for the landslide locations and timing, identifying predictions within a 120-m radius of observed landslides over the 30-h period of Hurricane Ivan’s passage in September 2004. Results show that within a radius of 24 m from the landslide location about 67% of the landslide, observations could be successfully predicted but with a high false alarm ratio (90%). If the radius of observation is extended to 120 m, 98% of the landslides are detected with an 18% false alarm ratio. This study shows that MaTRIGRS demonstrates acceptable spatiotemporal predictive skill for landslide occurrences within a 120-m radius in space and a hurricane-event-duration (h) in time, offering the potential to serve as a landslide warning system in areas where accurate rainfall forecasts and detailed field data are available. The validation can be further improved with additional landslide information including the exact time of failure for each landslide and the landslide’s extent and run out length.  相似文献   

5.
Digital elevation models (DEMs) are widely relied upon as representations of the Earth's topographic morphology. The most widely used global DEMs available are ETOPO5, TerrainBase and JGP95E at a 5‐arc‐minute spatial resolution, and the GTOPO30 and GLOBE (version 1) global DEMs at a 30‐arc‐second spatial resolution. This paper presents the results of intercomparisons of these global DEMs over Australia, and with the GEODATA 9‐arc‐second DEM (version 1) of Australia. These DEMs were also compared to an independently produced, altimeter‐derived orthometric height database. This allows not only a totally independent assessment of the quality of these different DEMs over Australia, but also an insight into the ERS‐1 radar altimeter's ability to measure orthometric heights on land. The results of all these comparisons reveal large differences among the DEMs, with the greatest difference between JGP95E and ETOPO5 (mean 49 m, standard deviation ±274 m). The comparison with the altimeter‐derived database shows good agreement with the version 1 GEODATA DEM (mean 2 m, standard deviation ±27 m), thus demonstrating that the altimeter is a viable method for quality assessment of DEMs in lowland regions. A further conclusion is that the representation of the Australian land surface in both the JGP95E and TerrainBase global DEMs is more accurate than the higher resolution GLOBE (version 1) global DEM, even though JGP95E displays a disparity along the 140°E meridian because of the different data sources used in its construction.  相似文献   

6.
Precipitation frequently triggers shallow landslides in the Loess Plateau of Shaanxi, China, resulting in loss of life, damage to gas and oil routes, and destruction of transport infrastructure and farmland. To assess the possibility of shallow landslides at different precipitation levels, a method to draw slope units and steepest slope profiles based on ARCtools and a new method for calculating slope stability are proposed. The methods were implemented in a case study conducted in Yan’an, north-west China. High resolution DEM (Digital Elevation Model) images, soil parameters from in-situ laboratory measurements and maximum depths of precipitation infiltration were used as input parameters in the method. Next, DEM and reverse DEM were employed to map 2146 slope units in the study area, based on which the steepest profiles of the slope units were constructed. Combining analysis of the water content of loess, strength of the sliding surface, its response to precipitation and the infinite slope stability equation, a new equation to calculate infinite slope stability is proposed to assess shallow landslide stability. The slope unit stability was calculated using the equation at 10-, 20-, 50- and 100-year return periods of antecedent effective precipitation. The number of slope units experiencing failure increased in response to increasing effective antecedent rainfall. These results were validated based on the occurrence of landslides in recent decades. Finally, the applicability and limitations of the model are discussed.  相似文献   

7.
In recent years SAR interferometry has become a widely used technique for measuring altitude and displacement of the surface of the earth. Both these capabilities are highly relevant for landslide susceptibility studies. Although there are many problems that make the use of SAR interferometry less suitable for landslide inventory mapping, it’s use in landslide monitoring and in the generation of input maps for landslide susceptibility assessment looks very promising. The present work attempts to evaluate the usefulness and limitations of this technique based on a case study in the Swiss Alps. Input maps were generated from ERS repeat pass data using SAR interferometry. A land cover map has been generated by image classification of multi-temporal SAR intensity images. An InSAR DEM was generated and a number of maps were derived from it, such as slope-, aspect, altitude- and slope form classes. These maps were used to generate landslide and rockfall susceptibility maps, which give fairly well acceptable results. However, a comparison of the InSAR DEM with the conventional Swisstopo DEM, indicated significant errors in the absolute height and slope angles derived from InSAR, especially along the ridges and in the valleys. These errors are caused by low coherence mostly due to layover and shadow effects. Visual comparison of stereo images created from hillshading maps and corresponding DEMs demonstrate that a considerable amount of topographic details have been lost in the InSAR-derived DEM. It is concluded that InSAR derived input maps are not ideal for landslide susceptibility assessment, but could be used if more accurate data is lacking.  相似文献   

8.
基于InSAR和ICESat的南极冰盖地区DEM提取和精度分析   总被引：3，自引：1，他引：2  
万雷  周春霞  鄂栋臣  邓方慧 《冰川冻土》2015,37(5):1160-1167
结合InSAR和ICESat测高数据,以东南极PANDA断面4个实验区为例,进行DEM生成研究.在干涉相位转换成高程前,引入ICESat测高数据作为控制点优化干涉对基线,消除基线线性误差趋势的影响.利用控制点之外的ICESat测高数据分析4个实验区的DEM精度及其差异,并探讨了引起DEM误差的原因.冰流和地貌特征是影响InSAR生成冰盖DEM精度的重要因素.针对冰流的影响,从理论上进行了分析并结合冰流速数据进行了分析验证.最后利用克里金插值法改正InSAR DEM残余误差,并利用GPS实测控制点对改正效果进行验证.结果表明:对于高纬区流速较小且分布一致的区域,改正效果很好,DEM精度可达3 m;而对于冰流速较大且复杂的地区,需采用多基线等算法进一步消弱冰流引入的误差.  相似文献   

9.
The aim of this study was to identify some new factors that may impact the occurrence and distribution of landslides based on light detection and ranging digital elevation model (LiDAR DEM), and to examine whether these factors can apply to distinguish between landslide and non-landslide pixels. Twenty-one landslide influential factors were identified. Thereinto, there were ten novel factors, namely the texture factors of slope and surface roughness, including the contrast (Con), correlation (Cor), angular second moment, entropy, and homogeneity (Hom) textures. Qualitative and quantitative analysis and feature selection method were applied to examine the application of these factors. The analysis results indicate that these factors have certain abilities to distinguish between landslide and non-landslide objects. And the selected optimal factors combination that derived from feature selection method was DEM, slope, Hom_d, Con_s, Cor_s, Hom_s, Con_r, Cor_r, and Hom_r (_d, _s, and _r represent DEM, slope, and surface roughness textures, respectively). In conclusion, the identified landslide influential factors can provide effective information for landslide identification. And the new texture factors of slope and surface roughness could act as important measurements that can improve the precision of landslide inventory mapping, susceptibility mapping, and risk assessment.  相似文献   

10.
Digital elevation models (DEMs) are widely used in the studies related to hydrological modeling. It provides spatially distributed topographical information which helps in the extraction of stream networks. Currently, DEMs obtained through spaceborne remote sensing platforms are increasingly utilized for stream network extraction. However, it is necessary to understand the quality of the derived products and their related issues. Therefore, a comparative study based on stream network extraction in geographical information system (GIS) is performed on such DEMs for two different terrains. Performance metrics such as root mean square error (RMSE), mean absolute error (MAE), standard deviation (SD) of error, correctness index (CI), and figure of merit (FM) are used for the DEM evaluation. The DEMs with finer spatial resolution performed better than coarser resolutions in all the performance indices. It is also observed that the derived stream network from the DEMs having same 30-m spatial resolution (ASTER and CartoDEM) has varying degree of errors. The positional errors of the streams are found to be less for the regions with steep slopes compared to flat terrain.  相似文献   

11.
Amending landslides inventories is immensely important to policy and decision makers alike. Sliding creates geometric shapes on the Earth’s surface. This study presents the utilization of LiDAR high-resolution digital elevation model (DEM) in the Alborz Mountains, Iran to refurbish the existing landslide inventory dataset by implementing the proposed algorithm. The method consists of the automated derivation of landslide geometry (length, width, and area) followed by classification of landslide types considering length, width and flow direction. This study has used the trapezoidal rule for numerical integration to develop the proposed algorithm. The landslides were then classified into four types (very long, long, very wide, and wide) based on slope, length, and width. This geometric classification of landslides is based on the geographical coordinates, slope angle (θ), length (L), and width (W), and further failure flow direction. A total of 95 landslides were updated from the existing inventory database. The proposed method was verified and evaluated by field observations; and 14 samples were tested to determine the relative error. The results demonstrated that the mean percentage relative error is 0.496% in length and width and 0.008% in area, related to the GIS analysis. The accuracy performance of determining the landslide’s type is 92%. The purposefulness of this algorithm is to increase the accuracy performance of landslides geometry analysis and automated measurements associated with the usual GIS platforms such as ArcGIS.  相似文献   

12.
A Digital Elevation Model issued from the SRTM mission was assessed on a study area located in a dense equatorial forest setting in French Guiana. The SRTM DEM defined on a 90-m grid was compared to three check sources: (1) airborne laser altimeter data, (2) an accurate heliborne DEM, and (3) spot heights. The paper also includes a comparison with a radargrammetric RADARSAT DEM. The results show that the accuracy of the SRTM DEM is about 10 m (standard deviation of errors). For a given slope aspect, the absolute value and the standard deviation of elevation errors increase almost linearly with the slope value. The slope aspect has a major influence on the sign of the elevation error: elevations are underestimated for slope facing SRTM signal (foreslopes, northwest), and conversely in the opposite direction (backslopes, southeast). Maximum errors are observed along these two directions. To cite this article: B. Bourgine, N. Baghdadi, C. R. Geoscience 337 (2005).  相似文献   

13.
Landslides of subaerial and submarine origin may generate tsunamis with locally extreme amplitudes and runup. While the landslides themselves are dangerous, the hazards are compounded by the generation of tsunamis along coastlines, in enclosed water bodies, and off continental shelves and islands. Tsunamis generated by three-dimensional deformable granular landslides were studied on planar and conical hill slopes in the three-dimensional NEES tsunami wave basin at Oregon State University based on the generalized Froude similarity. A unique pneumatic landslide tsunami generator (LTG) was deployed to control the kinematics and acceleration of the naturally rounded river gravel and cobble landslides to simulate broad ranges of landslide shapes and velocities along the slope. Lateral and overhead cameras are used to measure the landslide shapes and kinematics, while acoustic transducers provide the shape of the subaqueous deposits. The subaerial landslide shape is extracted from the camera images as the landslide propagates under gravity down the hill slope, and surface reconstruction of the landslide is conducted using the stereo particle image velocimetry (PIV) system on the conical hill slope. Subaerial landslide surface velocities are measured with a planar PIV system on the planar hill slope and stereo PIV system on the conical hill slope. The submarine deposits are characterized by the runout distances and the deposit thickness distributions. Larger cobbles are observed producing hummock type features near the maximum runout length. These unique laboratory landslide experiments serve to validate deformable landslide models as well as provide the source characteristics for tsunami generation.  相似文献   

14.
The applicability of the Permanent Scatterers Synthetic Aperture Radar Interferometry (PSInSAR) technique for detecting and monitoring ground displacements was tested in the Oltrepo Pavese territory (Northern Italy, southern Lombardia), which could be representative of similar geological contexts in the Italian Apennines. The study area, which extends for almost 1100 km2, is characterized by a complex geological and structural setting and the presence of clay-rich sedimentary formations. These characteristics make the Oltrepo Pavese particularly prone to several geological hazards: shallow and deep landslides, subsidence and swelling/shrinkage of the clayey soils. The PSInSAR technique used in this study overcomes most of the limitations of conventional interferometric approaches by identifying, within the area of interest, a set of “radar benchmarks” (PS), where very precise displacement measurements can be carried out. More than 90,000 PS were identified by processing Synthetic Aperture Radar (SAR) images acquired from 1992 to 2001 by the European Remote Sensing satellites (ERS). The PSInSAR application at a sub-regional scale detected slow ground deformations ranging from + 5 to − 16 mm/year, and resulting from various processes (landslides, swelling/shrinkage of clay soils and water pumping). The PS displacements were analysed by collecting data obtained through geological, geomorphologic field surveys, geotechnical analysis of the soils and the information was integrated within a landslide inventory and the damaged building inventory. Despite the limited number of landslide bodies with PS (7% of the inventoried landslides), the PS data helped to revise the state of activity of several landslides. Furthermore, some previously unknown unstable slopes were detected. Two areas of uplift and two areas of subsidence were identified.  相似文献   

15.
基于ICESat数据的南极冰盖DEM插值方法比较及精度分析   总被引：1，自引：0，他引：1  
南极数字高程模型(DEM)是从事南极地学和环境变化研究的基础. 内插是建立数字高程模型的重要技术点, 插值方法有多种, 根据不同的适用情况, 不同的插值方法各有优劣. 利用克里格、 距离反权、 三角网剖分、 最小曲率以及移动平均5种插值方法分别建立南极冰盖小范围区域的DEM, 通过抽取部分观测数据作为验证值对各插值方法进行了比较. 结果表明: 克里格插值方法的可靠性最好, 稳定性最高. 然后, 利用克里格插值方法, 基于ICESat测高卫星的GLA12数据建立了南极冰盖的DEM. 由于南极大陆实测数据有限, 缺乏对DEM的检核. 为了分析所建DEM的可靠性, 利用中国南极内陆冰盖考察所采集的GPS实测数据, 对所建立的DEM进行了验证分析. 结果显示, DEM在坡度较缓的南极内陆冰盖区域精度较高, 符合度在3 m以内; 距离卫星轨道越近的区域精度越高, 可达到1 m 以内. 在坡度较大, 高程变化较为显著的区域如沿海地区, 精度较低, 差距最大的点超过40 m.  相似文献   

16.
徐刚  郑达兴  乔子江  于新兵 《地质通报》2009,28(8):1047-1052
DEM和RS技术是研究滑坡地质灾害的重要资料和手段。近年来,随着高空间分辨率遥感卫星和高精度雷达卫星的上天,可以获取现时性高精度的DEM,使滑坡地质灾害的研究由二维向三维提升。利用IRS-P5数据生成的5m精度的DEM,借鉴GOOGLE的三维可视性原理,将其和高空间分辨率QuickBird(0.61m)数据叠置到数字地球之上,制作成三维可视性图像,进行滑坡环境指标参数提取方法研究。研究结果表明,该方法可直接读取滑坡环境指标的三维参数,具有客观、准确、快速的特点,可为滑坡灾害评估和区域地质灾害危险性评价提供定量化资料。  相似文献   

17.
Large landslides and deep-seated gravitational slope deformations (DSGSD) represent an important geo-hazard in relation to the deformation of large structures and infrastructures and to the associated secondary landslides. DSGSD movements, although slow (from a few millimetres to several centimetres per year), can continue for very long periods, producing large cumulative displacements and undergoing partial or complete reactivation. Therefore, it is important to map the activity of such phenomena at a regional scale. Ground surface displacements at DSGSD typically range close to the detection limit of monitoring equipment but are suitable for synthetic aperture radar (SAR) interferometry. In this paper, permanent scatterers (PSInSAR?) and SqueeSAR? techniques are used to analyse the activity of 133 DSGSD, in the Central Italian Alps. Statistical indicators for assigning a degree of activity to slope movements from displacement rates are discussed together with methods for analysing the movement and activity distribution within each landslide. In order to assess if a landslide is active or not, with a certain degree of reliability, three indicators are considered as optimal: the mean displacement rate, the activity index (ratio of active PS, displacement rate larger than standard deviation, overall PS) and the nearest neighbor ratio, which allows to describe the degree of clustering of the PS data. According to these criteria, 66% of the phenomena are classified as active in the monitored period 1992–2009. Finally, a new methodology for the use of SAR interferometry data to attain a classification of landslide kinematic behaviour is presented. This methodology is based on the interpretation of longitudinal ground surface displacement rate profiles in the light of numerical simulations of simplified failure geometries. The most common kinematic behaviour is rotational, amounting to 41 DSGSDs, corresponding to the 62.1% of the active phenomena.  相似文献   

18.
On December 4th 2007, a 3-Mm3 landslide occurred along the northwestern shore of Chehalis Lake. The initiation zone is located at the intersection of the main valley slope and the northern sidewall of a prominent gully. The slope failure caused a displacement wave that ran up to 38 m on the opposite shore of the lake. The landslide is temporally associated with a rain-on-snow meteorological event which is thought to have triggered it. This paper describes the Chehalis Lake landslide and presents a comparison of discontinuity orientation datasets obtained using three techniques: field measurements, terrestrial photogrammetric 3D models and an airborne LiDAR digital elevation model to describe the orientation and characteristics of the five discontinuity sets present. The discontinuity orientation data are used to perform kinematic, surface wedge limit equilibrium and three-dimensional distinct element analyses. The kinematic and surface wedge analyses suggest that the location of the slope failure (intersection of the valley slope and a gully wall) has facilitated the development of the unstable rock mass which initiated as a planar sliding failure. Results from the three-dimensional distinct element analyses suggest that the presence, orientation and high persistence of a discontinuity set dipping obliquely to the slope were critical to the development of the landslide and led to a failure mechanism dominated by planar sliding. The three-dimensional distinct element modelling also suggests that the presence of a steeply dipping discontinuity set striking perpendicular to the slope and associated with a fault exerted a significant control on the volume and extent of the failed rock mass but not on the overall stability of the slope.  相似文献   

19.
In the Swiss National Park, debris flows are a frequent phenomenon and have repeatedly affected highways and hiking structures. In this study, we first investigated the main characteristics and dimensions of current debris flows by field work and empirical parameterization schemes. Additionally, we evaluated a topography-based flow-trajectory geographic information system model (MSF) and a flow-routing model (FLO-2D) in terms of debris flow-affected areas. Three generically different digital elevation models (DEM) with grid spacing of 25, 4, and 1 m were used in conjunction with the flow models. The evaluation of the DEM grid spacing shows that for both flow models the 25-m DEM can give an approximate estimation of the potential hazard zone. Four- and one-meter DEMs mostly confine the simulated debris flow to existing channels and are in accordance with observations of recent debris-flow events. The study shows that DEM quality and grid resolution are crucial for the resulting delineation of potentially affected areas and thus for hazard assessment and mapping.  相似文献   

20.
This study quantified the relationship among deep-seated gravitational slope deformations (DGSDs), landslides, and river rejuvenation in the upper reaches of the Kumano River in the Kii Mountains of Japan, an area of frequent bedrock landslides. River profiles and hillslope landforms were examined, and high-resolution digital elevation models (DEMs) were used to identify DGSDs and landslides. Many of the deep-seated landslides were associated with rainstorms in 1889 and 2011. Landslide volumes were related to landslide areas on the basis of 52 deep-seated landslides that failed during the 2011 rainfall, providing basic data for landscape denudation and sediment yield. River rejuvenation occurred stepwise, incising moderate relief paleosurfaces and forming two series of knickpoints and V-shaped inner gorges that are up to 400-m deep. More than 65% of DGSDs and 75% of the landslides were located in association with the incised inner gorges along the peripheries of the paleosurfaces or were entirely contained within the inner gorges. DGSDs and landslides associated with the incised inner valley slopes tended to be larger than those developed within the paleosurfaces and may be long-term transient hillslope responses to river incision. Hillslope undercutting caused by rejuvenated river incision may play an important role in long-term slope stability and distribution of mass movements, and could serve as an indicator of landslide hazard.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号