共查询到20条相似文献，搜索用时 171 毫秒
1.
This study aims to extend the multivariate adaptive regression splines(MARS)-Monte Carlo simulation(MCS) method for reliability analysis of slopes in spatially variable soils. This approach is used to explore the influences of the multiscale spatial variability of soil properties on the probability of failure(P_f) of the slopes. In the proposed approach, the relationship between the factor of safety and the soil strength parameters characterized with spatial variability is approximated by the MARS, with the aid of Karhunen-Loeve expansion. MCS is subsequently performed on the established MARS model to evaluate Pf.Finally, a nominally homogeneous cohesive-frictional slope and a heterogeneous cohesive slope, which are both characterized with different spatial variabilities, are utilized to illustrate the proposed approach.Results showed that the proposed approach can estimate the P_f of the slopes efficiently in spatially variable soils with sufficient accuracy. Moreover, the approach is relatively robust to the influence of different statistics of soil properties, thereby making it an effective and practical tool for addressing slope reliability problems concerning time-consuming deterministic stability models with low levels of P_f.Furthermore, disregarding the multiscale spatial variability of soil properties can overestimate or underestimate the P_f. Although the difference is small in general, the multiscale spatial variability of the soil properties must still be considered in the reliability analysis of heterogeneous slopes, especially for those highly related to cost effective and accurate designs. 相似文献
2.
提出了一套基于随机响应面法的边坡系统可靠度分析方法。该方法首先从大量潜在滑动面中筛选出代表性滑动面。针对每条代表性滑动面,采用Hermite多项式展开建立其安全系数与土体参数间的非线性显式函数关系（即随机响应面）。然后,采用直接蒙特卡洛模拟计算边坡系统失效概率。在蒙特卡罗模拟中,采用所有代表性滑动面的随机响应面计算每一组样本所对应的边坡最小安全系数。最后,以两个典型多层边坡系统可靠度问题为例验证了该方法的有效性。结果表明：文中提出的边坡系统可靠度分析方法能够有效地识别边坡代表性滑动面,具有较高的计算精度和效率,并且确定代表性滑动面时无需计算滑动面间的相关系数。同时该方法可以有效地计算低失效概率水平的边坡系统可靠度,为含相关非正态参数的边坡系统可靠度问题提供了一条有效的分析途径。此外,多层边坡可能同时存在多条潜在滑动面,基于单一滑动面（如临界确定性滑动面）或者部分代表性滑动面进行边坡系统可靠度分析均会低估边坡失效概率。 相似文献
3.
多层土坡在岩土工程实际中十分常见,不仅土体参数存在一定的空间变异性,而且土体框架呈现明显的层状分布特征,然而目前对考虑土体参数空间变异性的多层土坡稳定可靠度研究的远远不够。提出了基于多重响应面边坡系统可靠度分析的蒙特卡洛模拟（MCS）方法,给出了计算流程图,系统地研究了考虑土体参数空间变异性的多层土坡系统可靠度问题。结果表明,提出方法能够有效地分析考虑参数空间变异性低失效概率水平的多层土坡系统可靠度问题,并且具有较高的参数敏感性分析计算效率。 相似文献
4.
This paper develops a risk de-aggregation and system reliability approach to evaluate the slope failure probability, pf, using representative slip surfaces together with MCS. An efficient procedure is developed to strategically select the candidate representative slip surfaces, and a risk de-aggregation approach is proposed to quantify contribution of each candidate representative slip surface to the pf, identify the representative slip surfaces, and determine how many representative slip surfaces are needed for estimating the pf with reasonable accuracy. Risk de-aggregation is performed by collecting the failure samples generated in MCS and analyzing them statistically. The proposed methodology is illustrated through a cohesive soil slope example and validated against results from previous studies. When compared with the previous studies, the proposed approach substantially improves the computational efficiency in probabilistic slope stability analysis. The proposed approach is used to explore the effect of spatial variability on the pf. It is found that, when spatial variability is ignored or perfect correlation assumed, the pf of the whole slope system can be solely attributed to a single representative slip surface. In this case, it is theoretically appropriate to use only one slip surface in the reliability analysis. As the spatial variability becomes growingly significant, the number of representative slip surfaces increases, and all representative slip surfaces (i.e., failure modes) contribute more equally to the overall system risk. The variation of failure modes has substantial effect on the pf, and all representative surfaces have to be incorporated properly in the reliability analysis. The risk de-aggregation and system reliability approach developed in this paper provides a practical and efficient means to incorporate such a variation of failure modes in probabilistic slope stability analysis. 相似文献
5.
Enhancement of random finite element method in reliability analysis and risk assessment of soil slopes using Subset Simulation 总被引：4，自引：2，他引：2
Random finite element method (RFEM) provides a rigorous tool to incorporate spatial variability of soil properties into reliability analysis and risk assessment of slope stability. However, it suffers from a common criticism of requiring extensive computational efforts and a lack of efficiency, particularly at small probability levels (e.g., slope failure probability P f ?<?0.001). To address this problem, this study integrates RFEM with an advanced Monte Carlo Simulation (MCS) method called “Subset Simulation (SS)” to develop an efficient RFEM (i.e., SS-based RFEM) for reliability analysis and risk assessment of soil slopes. The proposed SS-based RFEM expresses the overall risk of slope failure as a weighed aggregation of slope failure risk at different probability levels and quantifies the relative contributions of slope failure risk at different probability levels to the overall risk of slope failure. Equations are derived for integrating SS with RFEM to evaluate the probability (P f ) and risk (R) of slope failure. These equations are illustrated using a soil slope example. It is shown that the P f and R are evaluated properly using the proposed approach. Compared with the original RFEM with direct MCS, the SS-based RFEM improves, significantly, the computational efficiency of evaluating P f and R. This enhances the applications of RFEM in the reliability analysis and risk assessment of slope stability. With the aid of improved computational efficiency, a sensitivity study is also performed to explore effects of vertical spatial variability of soil properties on R. It is found that the vertical spatial variability affects the slope failure risk significantly. 相似文献
6.
Three-dimensional slope reliability and risk assessment using auxiliary random finite element method
This paper aims to propose an auxiliary random finite element method (ARFEM) for efficient three-dimensional (3-D) slope reliability analysis and risk assessment considering spatial variability of soil properties. The ARFEM mainly consists of two steps: (1) preliminary analysis using a relatively coarse finite-element model and Subset Simulation, and (2) target analysis using a detailed finite-element model and response conditioning method. The 3-D spatial variability of soil properties is explicitly modeled using the expansion optimal linear estimation approach. A 3-D soil slope example is presented to demonstrate the validity of ARFEM. Finally, a sensitivity study is carried out to explore the effect of horizontal spatial variability. The results indicate that the proposed ARFEM not only provides reasonably accurate estimates of slope failure probability and risk, but also significantly reduces the computational effort at small probability levels. 3-D slope probabilistic analysis (including both 3-D slope stability analysis and 3-D spatial variability modeling) can reflect slope failure mechanism more realistically in terms of the shape, location and length of slip surface. Horizontal spatial variability can significantly influence the failure mode, reliability and risk of 3-D slopes, especially for long slopes with relatively strong horizontal spatial variability. These effects can be properly incorporated into 3-D slope reliability analysis and risk assessment using ARFEM. 相似文献
7.
提出了基于支持向量机（SVM）的边坡可靠度分析新算法。该方法采用均匀设计确定样本点,通过一定数量的确定性计算来训练SVM,拟合边坡的功能函数;采用一阶可靠度方法（FORM）和迭代算法优化SVM模型,获得可靠度指标和验算点信息;在SVM模型基础上进一步通过二阶可靠度方法（SORM）和蒙特卡罗模拟（MCS）计算边坡的失稳概率。以两个典型边坡为例,通过与其他方法比较,证明了该方法的准确性和高效性。结果表明：提出的在标准正态空间（U空间）中取样并构建SVM,在原始空间（X空间）中计算功能函数的算法,有效地解决了具有相关非正态分布变量的可靠度分析问题,并且可很容易扩展到SORM的计算。算例结果证明,该方法的精度高于FORM;而效率优于MCS。分析过程中,边坡安全系数计算和可靠度分析相互独立。因此,该方法既适用于具有显式功能函数的简单问题,也适用于需要软件计算安全系数的实际边坡问题。 相似文献
8.
Monte Carlo Simulation (MCS) method has been widely used in probabilistic analysis of slope stability, and it provides a robust and simple way to assess failure probability. However, MCS method does not offer insight into the relative contributions of various uncertainties (e.g., inherent spatial variability of soil properties and subsurface stratigraphy) to the failure probability and suffers from a lack of resolution and efficiency at small probability levels. This paper develop a probabilistic failure analysis approach that makes use of the failure samples generated in the MCS and analyzes these failure samples to assess the effects of various uncertainties on slope failure probability. The approach contains two major components: hypothesis tests for prioritizing effects of various uncertainties and Bayesian analysis for further quantifying their effects. Equations are derived for the hypothesis tests and Bayesian analysis. The probabilistic failure analysis requires a large number of failure samples in MCS, and an advanced Monte Carlo Simulation called Subset Simulation is employed to improve efficiency of generating failure samples in MCS. As an illustration, the proposed probabilistic failure analysis approach is applied to study a design scenario of James Bay Dyke. The hypothesis tests show that the uncertainty of undrained shear strength of lacustrine clay has the most significant effect on the slope failure probability, while the uncertainty of the clay crust thickness contributes the least. The effect of the former is then further quantified by a Bayesian analysis. Both hypothesis test results and Bayesian analysis results are validated against independent sensitivity studies. It is shown that probabilistic failure analysis provides results that are equivalent to those from additional sensitivity studies, but it has the advantage of avoiding additional computational times and efforts for repeated runs of MCS in sensitivity studies. 相似文献
9.
如何有效地评价边坡的系统可靠度并识别出对边坡稳定性具有重要影响的关键滑面一直是边坡稳定性分析的关键问题。提出了基于广义子集模拟的边坡系统可靠度分析方法及代表性滑面识别方法,并推导了基于广义子集模拟的边坡系统可靠度计算公式及边坡中滑面对边坡系统失效的相对贡献量化公式。基于广义子集模拟计算结果,采用概率网络评价方法识别边坡代表性滑面。以一个双层黏性土坡和芝加哥国会切坡算例验证了所提方法的有效性。结果表明：提出的基于广义子集模拟的边坡系统可靠度分析方法可有效地估计边坡系统及其单一滑面的失效概率,对于具有低失效概率水平边坡可靠度的求解,其计算效率明显优于传统蒙特卡洛模拟方法。此外,对于单个失效模式而言,广义子集模拟与子集模拟计算效率相当。对于多个失效模式的失效概率计算问题,广义子集模拟不需要重复对每个失效模式失效概率进行计算,计算效率明显优于子集模拟。提出的代表性滑面选择方法是在系统失效概率及单滑面失效概率的高效计算基础上实现的,代表性滑动面能够较好地代表边坡系统失效,从而有效地降低了边坡系统失效概率对代表性滑面数目及代表性滑面失效概率估计准确性的依赖性。 相似文献
10.
Correlated random variables are commonly involved in probabilistic slope stability analysis, such as reliability analysis of slopes with spatially variable soil properties. This paper proposes a simple Correlated Sampling Technique (CST) for generating samples of correlated random variables. The CST firstly produces correlated standard-normally distributed samples through linear combinations of independent standard-normally distributed samples. Correlated arbitrarily distributed samples can then be obtained by the Nataf transformation. The CST was combined with FOSM (named CST-based FOSM) for probabilistic slope stability analysis. The slope reliabilities of a single-layered cohesive soil slope and a high earth and rockfill dam were analyzed to illustrate the CST-based FOSM. These illustrative examples indicated that the CST-based FOSM can accurately estimate the slope reliability indices with considerably fewer simulations (especially in the case of low failure probability) compared with direct MCS, and the slope reliability was sensitive to the correlation of the strength parameters. 相似文献
11.
How to efficiently assess the system reliability of rock slopes is still challenging. This is because when the probability of failure is low, a large number of deterministic slope stability analyses are required. Based on Subset simulation, this paper proposes an efficient approach for the system reliability analysis of rock slopes. The correlations among multiple potential failure modes are properly accounted for with the aid of the “max” and “min” functions. A benchmark rock slope and a real engineered rock slope with multiple correlated failure modes are used to demonstrate the effectiveness of the proposed approach. 相似文献
12.
Alitabar Abbas Noorzad Reza Qolinia Afshin 《Geotechnical and Geological Engineering》2021,39(6):4237-4251
Embankment dams are one of the most important geotechnical structures that their failures can lead to disastrous damages. One of the main causes of dam failure is its slope instability. Slope Stability analysis has traditionally been performed using the deterministic approaches. These approaches show the safety of slope only with factor of safety that this factor cannot take into account the uncertainty in soil parameters. Hence, to investigate the impact of uncertainties in soil parameters on slope stability, probabilistic analysis by Monte Carlo Simulation (MCS) method was used in this research. MCS method is a computational algorithm that uses random sampling to compute the results. This method studies the probability of slope failure using the distribution function of soil parameters. Stability analysis of upstream and downstream slopes of Alborz dam in all different design modes was done in both static and quasi-static condition. Probability of failure and reliability index were investigated for critical failure surfaces. Based on the reliability index obtained in different conditions, it can be said that the downstream and upstream slope of the Alborz dam is stable. The results show that although the factor of safety for upstream slope in the state of earthquake loading was enough, but the results derived from probabilistic analysis indicate that the factor of safety is not adequate. Also the upstream slope of the Alborz dam is unstable under high and uncontrolled explosions conditions in steady seepage from different levels under quasi-static terms.
相似文献13.
相较于极限平衡法,强度折减法在计算边坡稳定性系数上有许多优势,但更大的计算量在一定程度上限制了其在边坡可靠度分析中的应用。为了有效地减少可靠度分析中数值模型的计算次数,以减轻使用强度折减法所带来的计算压力,引入了基于主动学习径向基函数（ARBF）代理模型的高效分析方法：利用主动学习函数在极限状态面附近搜索训练样本更新代理模型,加快模型训练的收敛速度;采用线性核径向基插值函数简化模型参数优化过程,建立简洁、稳定的代理模型。此外,为了充分发挥主动学习代理模型的优势,提出针对土质边坡特性的初始采样策略。当得到稳定的代理模型后,结合蒙特卡罗模拟计算边坡的系统失稳概率。作为对比,基于两个典型边坡算例,测试了两种经典的可靠度方法：主动学习克里金模型（AK）和二次响应面法（QRSM）,论证了引入的主动学习径向基函数代理模型在计算效率上的高效性和计算模型上的稳定性。 相似文献
14.
Te Xiao Zi-Jun Cao Xiao-Song Tang 《Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards》2017,11(1):146-159
ABSTRACTA simplified reliability analysis method is proposed for efficient full probabilistic design of soil slopes in spatially variable soils. The soil slope is viewed as a series system comprised of numerous potential slip surfaces and the spatial variability of soil properties is modelled by the spatial averaging technique along potential slip surfaces. The proposed approach not only provides sufficiently accurate reliability estimates of slope stability, but also significantly improves the computational efficiency of soil slope design in comparison with simulation-based full probabilistic design. It is found that the spatial variability has considerable effects on the optimal slope design. 相似文献
15.
考虑时间效应的滑坡风险评估和管理 总被引：4，自引：1，他引：3
提出了考虑时间效应的滑坡风险评估和管理方法。以香港地区近20年的16 000个切破的观测资料为基础,从统计学的角度提出了边坡的时变可靠性分析方法。推导了新建边坡在未来服役时间内的年失效概率的计算公式,并对现役边坡在未来服役时间内的年失效概率进行了预测。确定了基于年死亡人数的滑坡风险接受准则,并分析了基于滑坡时变风险的边坡加固时间。结果表明,考虑时间效应的滑坡风险评估和管理方法能够更加真实地反映滑坡随时间变化的特性。新建边坡的年失效概率随边坡服役时间逐渐增大,尤其是当边坡服役超过10年时,每年发生滑坡的概率急剧增大。现役边坡的年失效概率基本与继续服役时间呈线形关系。此外,香港斜坡维修指南规定的边坡加固时间能够有效地将滑坡风险降低到ALARP区或可接受的风险区。 相似文献
16.
Embankment slopes composed of spatially variable soils have a variety of different failure modes that are affected by the correlation distances of the material properties and the geometry and total length of the slope. This paper examines the reliability of soil slopes for embankments of different length and uses parallel computing to analyse very long embankments (up to 100 times the embankment height) for a clay soil characterised by a spatially varying undrained shear strength. Based on a series of analyses using the 3D random finite element method (RFEM), it is first shown that the reliability of slopes of various length can be efficiently computed by combining simple probability theory with a detailed 3D RFEM analysis of a representative shorter slope of length 10 times the slope height. RFEM predictions of reliability indices for longer slopes are then compared with results obtained using Vanmarcke's (1977a) simplified 3D method and Calle's (1985) extended 2D approach. It is shown that these methods can give significantly different results, depending on the horizontal scale of fluctuation relative to the slope length, with RFEM predicting a lower slope reliability than the Vanmarcke and Calle solutions in all cases. The differences in the solutions are evaluated and attributed to differences in the assumed and computed failure surface geometries. 相似文献
17.
Simple limit equilibrium analyses can be performed to determine the Factor of Safety (FOS) against slope failure of unsaturated
soil slopes. However, many of the input parameters needed for these analyses are highly variable, and the FOS value obtained
is critically dependent on assumptions made by the designer. This paper describes a suite of reliability analyses on unsaturated
soil slopes performed using an invariant reliability model. The results are presented in design charts from which a designer
can choose the FOS value required to ensure a given target reliability index for a slope. The approach ensures that despite
the variability of input parameters the slope will have a probability of failure of 2.23% or less. 相似文献
18.
约束随机场下的边坡可靠度随机有限元分析方法 总被引：2，自引：1，他引：1
目前边坡可靠度中常用的简化分析方法,不考虑边坡土体的空间变异性,每次计算整个边坡都取用相同的强度参数,由离散点试样试验得到的土体参数统计特性只能反映点特性,而边坡的稳定性受滑面上平均抗剪强度特性控制,因此,需要考虑空间范围内的平均特性。描述空间变异性的随机场理论对变异性较高的土体,实际上高估了其空间变异性。把随机场理论和地质统计中的区域化变量理论结合起来,建立约束随机场,并在此基础上进行Monte-Carlo随机有限元分析。计算实例表明,在高变异性条件下约束随机场能有效降低完全随机场的模拟方差,得到更低的破坏概率。对比了随机有限元和简化法的计算结果表明,简化法在土体强度变异性很高时其结果并非偏于保守。另外也指出了可靠度分析中存在的边坡尺度效应和简化法的适用条件。 相似文献
19.
极限分析上限方法在边坡稳定性评价中受到了广泛关注,但当前所取得的解析成果尚不能直接应用于解决任意多土层分布、多台阶的广义复杂层状边坡。基于组合对数螺线的旋转破坏机制,推导了具有任意坡面几何特征、任意多土层（含非水平土/岩层）边坡的外功率统一积分表达式及相应的虚功率方程,提出了多阶多层复杂边坡稳定性的通用极限分析上限方法;为克服积分式的复杂解析计算,引入了数值积分技术。在此基础上,结合最优化方法和强度折减技术,优化求解了复杂边坡的全局稳定性安全系数及相应的临界滑动面。通过多个典型算例的验证与对比分析,表明该方法具有较高的精度和广泛适用性。最后,针对典型多阶多层边坡实例,开展了上限法的深度拓展与应用研究,其结果为广义复杂层状边坡的稳定性评价提供了新思路。 相似文献
20.
A data driven multivariate adaptive regression splines (MARS) based algorithm for system reliability analysis of earth slopes having random soil properties under the framework of limit equilibrium method of slices is considered. The theoretical formulation is developed based on Spencer method (valid for general slip surfaces) satisfying all conditions of static equilibrium coupled with a nonlinear programming technique of optimization. Simulated noise is used to take account of inevitable modeling inaccuracies and epistemic uncertainties. The proposed MARS based algorithm is capable of achieving high level of computational efficiency in the system reliability analysis without significantly compromising the accuracy of results. 相似文献