共查询到20条相似文献,搜索用时 171 毫秒
1.
坐标系统的统一是1个地区地理信息资源共享和标准统一的基础,目前,很多地区采用多个测量坐标系统,为实现测量坐标系统的统一,需要对不同坐标系的地理信息成果进行坐标转换。本文结合青岛市实际,对青岛市已有地理信息由原来采用的"青岛市城市坐标系"向国家统一的"1980西安坐标系"之间的转换精度和可靠性进行了探讨,通过具体数据的分析计算得出,2套坐标系之间转换切实可行,完全满足精度要求。 相似文献
2.
3.
基于Galieo变换,导出了运动坐标系与静止坐标系中海浪谱间的关系。由于海浪是频散的,两者间的关系是频率相关的。运动坐标系中的海浪频谱是与静止坐标系中的海浪方向谱相联系的。以文氏谱作为静止坐标系中的海浪频谱,给出了不同速度下运动坐标系中的海浪频谱。 相似文献
4.
5.
6.
7.
1 创造测天仪器覆矩夜色深沉 ,星光灿烂 ,夏至夜晚的热风不断地吹过高高的观象台。一行站在黄道游仪前 ,微微旋动测环 ,通过望筒仰望北极星空。当北极星出现在视野之中 ,便锁定观测 ,记录下数值。接着 ,根据黄道与赤道的交角 (2 3度多 ) ,推算出本地的地平高度。地平高度是古代基于地平坐标系的概念。地平坐标系是以地平线为基本圈 ,以南方基点为起点的天体坐标系 ,它以地平经度 (方位角 )与地平高度来表示天体的位置 ,某地点的地平高度实际上是该点近似的地理纬度。自西汉落下闳发明浑天仪以来 ,人们通常使用这种方法去测量某城某地的地理… 相似文献
8.
9.
沿海区域的测绘资料主要采用1954年北京坐标系、1980西安坐标系和2000国家坐标系(旧称WGS84坐标系),造成使用不便,需要构建这些系统之间的转换关系。不同方法和不同分区的大量试算表明,1980西安坐标系与WGS84坐标系可以采用7参数转换模型,3个分区和5个分区的精度都能达到0.5 m,其中5个分区的精度较好。由于1954年北京坐标系的特殊性,简单的7参数模型不能确保系统的转换精度,1954年北京坐标系与WGS84坐标系最好采用曲面拟合方法实现坐标转换,整个沿海区域采用6个分区,精度可以达到0.5 m以内的转换要求。 相似文献
10.
阐述了应用椭球变换的方法建立区域独立坐标系的方法。以某山区道路为例,分别运用椭球膨胀法、椭球平移法、椭球变形法建立区域独立坐标系,对这些方法建立的独立坐标系的投影变形值进行了分析,比较了三种方法的特点。 相似文献
11.
12.
讨论了变形极坐标法的观测、计算和精度分析,给出了供应用的待定点点位中误差实用的计算式和点位误差等值线图。同时,对该法的应用提出了几点建议,供实际作业参考和应用。 相似文献
13.
The problem of static three-dimensional, nonlinear, large deformation response of a marine riser is formulated within small strain theory and solved numerically. This type of analysis is necessary, for the new generation of drilling and production risers. The mathematical model takes properly into account the effects of internal and external pressure and the complete nonlinear boundary conditions, without linearizing the follower forces. The extensibility or inextensibility condition is used as the constitutive relation in the tangential direction. Torsion and bending are coupled. The external load and the boundary conditions are deformation dependent. A solution method is developed based on an incremental finite element algorithm, which involves a prediction-correction scheme. In the correction phase deformation dependent quantities are updated. The extensibility or inextensibility condition is used to reduce the degrees of freedom of the system. The numerical results of the developed computer code compare very well with available semi-analytical and numerical solutions. Three numerical applications are used to demonstrate the importance of large deformation, nonlinear and three-dimensional analyses. 相似文献
14.
Two-Dimensional Mathematical Model of Tidal Current and Sediment for Oujiang Estnary and Wenzhou Bay 总被引:1,自引:0,他引:1
A 2-D mathematical model of tidal current and sediment has been developed for the Oujiang Estuary and the WenzhouBay. This model accomodates complicated features including multiple islands, existence of turbidity, and significant differ-ence in size distribution of bed material. The governing equations for non-uniform suspended load and bed load transport arepresented in a boundary-fitted orthogonal curvilinear coordinate system. The numerical solution procedures along with theirinitial conditions, boundary conditions, and movable boundary technique are presented. Strategies for computation of thecritical condition of deposition or erosion, sediment transport capacity, non-uniform bed load discharge, etc. are suggested.The model verification computation shows that, the tidal levels computed from the model are in good agreement with the fielddata at the 18 tidal gauge stations. The computed velocities and flow directions also agree well with the values measuredalong the totally 52 synchronously observed verticals distributed over 8 cross sections. The computed tidal water throughputsthrough the Huangda‘ao cross section are close to the measured data. And the computed values of bed deformation fromYangfushan to the estuary outfall and in the outer-sea area are in good agreement with the data observed from 1986 to 1992.The changes of tidal volumes through the estuary, velocities in different channels and the bed form due to the influence of thereclamation project on the Wenzhou shoal are predicted by means of this model. 相似文献
15.
Two-Dimensional Mathematical Model of Tidal Current and Sediment for Oujiang Estuary and Wenzhou Bay 总被引:3,自引:0,他引:3
A 2-D mathematical model of tidal current and sediment has been developed for the Oujiang Estuary and the Wenzhou Bay. This model accomodates complicated features including multiple islands, existence of turbidity, and significant differ-ence in size distribution of bed material. The governing equations for non-uniform suspended load and bed load transport are presented in a boundary-fitted orthogonal curvilinear coordinate system. The numerical solution procedures along with their initial conditions, boundary conditions, and movable boundary technique are presented. Strategies for computation of the critical condition of deposition or erosion, sediment transport capacity, non-uniform bed load discharge, etc. are suggested. The model verification computation shows that, the tidal levels computed from the model are in good agreement with the field data at the 18 tidal gauge stations. The computed velocities and flow directions also agree well with the values measured along the totally 52 synchronously ob 相似文献
16.
17.
The hydrodynamic problem of a two dimensional wedge tank filled with liquid entering a calm water surface is analysed based on the incompressible velocity potential theory. The motion effect of inner liquid on the entry process is investigated through comparison with the result containing equivalent solid mass or the liquid being frozen. The problem is solved through the boundary element method in the time domain. Two separated computational regions are constructed. One is the inner domain for the internal liquid, and the other is the outer open domain for the open water. The former is solved in the physical coordinate system, and the latter is solved in a stretched coordinate system. The solutions of two separated domains are connected through the motion of the body. The auxiliary function method is extended to decouple the nonlinear mutual dependence between fluid loads from two separated domains and the body motion. Detailed results for wedge motion, external impact pressure and free surface, and for internal pressure, free surface deformation and liquid motion are provided. Through comparison with the results of a wedge tank with frozen ice, in-depth discussion on the effect of the inner liquid is provided. 相似文献
18.
利用GPS对构筑物进行动态变形监测,获取构筑物的动态变形序列,通过卡尔曼滤波处理变形时间序列,从而削弱相关噪声的影响,提取真实的变形信号,并通过FFT处理变形信号,验证其滤波效果.在分析累积和算法的前提下,构建构筑物预警模型,分析了平均运行长度及预警阈值等相关参数的选取原则.经实测数据分析,模型能有效检测到变形发生时刻,该方法能够提高GPS进行动态变形预警的可靠性,特别是为微小变形提供一定研究指导意义. 相似文献
19.
20.
海底输油管线是海洋油气田开发的生命线工程,在复杂的海洋环境中易发生破坏.为使管线实现自埋防护,提出用柔性材料代替刚性导流板安装在管线顶部,不仅可以增加阻水面积,加大冲刷深度和范围,而且可以减缓刚性导流板对管线上部水流的扰动强度和尾流涡旋的扰动强度,减小管线的振动.利用力学关系由变形方程推导出海底管线与海底间距离为零以及不为零情况下柔性导流板变形的二次曲面方程和自由端最大挠度.在单向流条件下将不同材料不同长度的柔性导流板安装在管线中轴上方开展试验研究,测量柔性导流板在水流作用下的变形曲面.对比分析利用公式计算柔性导流板的自由端最大挠度和曲面变形数据与试验结果,发现两者吻合较好. 相似文献