共查询到20条相似文献，搜索用时 15 毫秒
1.
The Songliao Basin is a large-scale petroliferous basin in China. With a gradual decline in conventional oil production, the exploration and development of replacement resources in the basin is becoming increasingly important. Previous studies have shown that the Cretaceous Qingshankou Formation (K2qn) has favorable geological conditions for the formation of shale oil. Thus, shale oil in the Qingshankou Formation represents a promising and practical replacement resource for conventional oil. In this study, geological field surveys, core observation, sample tests, and the analysis of well logs were applied to study the geochemical and reservoir characteristics of shales, identify shale oil beds, build shale oil enrichment models, and classify favorable exploration areas of shale oil from the Cretaceous Qingshankou Formation. The organic matter content is high in shales from the first member of the Cretaceous Qingshankou Formation (K2qn1), with average total organic carbon (TOC) content exceeding 2%. The organic matter is mainly derived from lower aquatic organisms in a reducing brackish to fresh water environment, resulting in mostly type I kerogen. The vitrinite reflectance (Ro) and the temperature at which the maximum is release of hydrocarbons from cracking of kerogen occurred during pyrolysis (Tmax) respectively range from 0.5% to 1.1% and from 430 °C to 450 °C, indicating that the K2qn1 shales are in the low-mature to mature stage (Ro ranges from 0.5% to 1.2%) and currently generating a large amount of oil. The favorable depth for oil generation and expulsion is 1800–2200 m and 1900–2500 m, respectively as determined by basin modeling. The reserving space of the K2qn1 shale oil includes micropores and mircofractures. The micropore reservoirs are developed in shales interbedded with siltstones exhibiting high gamma ray (GR), high resistivity (Rt), low density (DEN), and slightly abnormal spontaneous potential (SP) in the well-logging curves. The microfracture reservoirs are mainly thick shales with high Rt, high AC (acoustic transit time), high GR, low DEN, and abnormal SP. Based on the shale distribution, geochemical characteristics, reservoir types, fracture development, and the process of shale oil generation and enrichment, the southern Taikang and northern Da'an are classified as two favorable shale oil exploration areas in the Songliao Basin. 相似文献
2.
Shales from the Lower Silurian Longmaxi Formation in the Sichuan Basin are among the most important shale gas reservoirs in China, and have been investigated because of their great shale gas potential. To understand the pore structure and fractal characteristics of the shales, a series of experiments was conducted on core samples from the Lower Silurian Longmaxi Formation in the Sichuan Basin of China, including X-ray diffraction (XRD), total organic carbon (TOC) content and vitrinite reflectance (Ro) analysis, field emission-environmental scanning electron microscope (FE-ESEM) observation, and low-pressure N2 adsorption-desorption experiments. Frenkel-Halsey-Hill (FHH) method was applied to calculate fractal dimensions. In addition, the pore genesis, the relationships between composition and thermal maturity, the pore structure parameters, and the fractal dimensions are discussed. FE-ESEM observation results show that the Longmaxi Formation shales are dominated by organic-matter (OM) pores along with interparticle (interP) pores, intraparticle (intraP) pores and fracture pores. This study identified the fractal dimensions at relative pressures of 0–0.45 and 0.45–1 as D1 and D2 respectively. D1 ranged from 2.60 to 2.71 and D2 ranged from 2.71 to 2.82. D1 was typically smaller than D2, indicating that the smaller pores in shales were more homogeneous than the larger ones. The formation of these OM pores is owing to kerogen deformation during the thermal maturation, which results in a large number of nanopores. The pore structure of the Longmaxi Formation shales is primarily controlled by TOC content and thermal maturity. TOC content is a controlling factor on the fractal dimensions as it exhibited positive correlations with D1 and D2. Fractal dimensions are useful for the characterization of the pore structures complexity of the Longmaxi Formation shales because D1 and D2 correlate well with pore structure parameters as they both increase with the increase of surface area and the decrease of average pore diameter. 相似文献
3.
The geochemical and petrographic characteristics of saline lacustrine shales from the Qianjiang Formation, Jianghan Basin were investigated by organic geochemical analysis, X-ray diffraction (XRD), scanning electron microscopy (SEM) and low pressure nitrogen adsorption analysis. The results indicate that: the saline lacustrine shales of Eq3 member with high oil content are characterized by type I and type II oil-prone kerogen, variable TOC contents (1.0–10.0 wt%) and an early-maturity stage (Ro ranges between 0.41 and 0.76%). The mineral compositions of Eq3 saline shale show strong heterogeneity: brittle intervals with high contents of quartz and carbonate are frequently alternated with ductile intervals with high glauberite and clay contents. This combination might be beneficial for oil accumulation, but may cause significant challenges for the hydraulic stimulation strategy and long-term production of shale oil. The interparticle pores and intraparticle pores dominate the pore system of Eq3 shale, and organic matter hosted pores are absent. Widely distributed fractures, especially tectonic fractures, might play a key role in hydrocarbon migration and accumulation. The pore network is contributed to by both large size inorganic pores and abundant micro-factures, leading to a relatively high porosity (2.8–30.6%) and permeability (0.045–6.27 md) within the saline shale reservoir, which could enhance the flow ability and storage capacity of oil. The oil content (S1 × 100/TOC, mg HC/g TOC and S1, mg HC/g rock) and brittleness data demonstrate that the Eq33x section has both great potential for being a producible oil resource and hydraulic fracturing. Considering the hydrocarbon generation efficiency and properties of oil, the mature shale of Eq3 in the subsidence center of the Qianjiang Depression would be the most favorable zone for shale oil exploitation. 相似文献
4.
The paper takes the Upper Carboniferous Taiyuan shale in eastern uplift of Liaohe depression as an example to qualitatively and quantitatively characterize the transitional (coal-associated coastal swamp) shale reservoir. Focused Ion Beam Scanning Electron Microscope (FIB-SEM), nano-CT, helium pycnometry, high-pressure mercury intrusion and low-pressure gas (N2 & CO2) adsorption for eight shale samples were taken to investigate the pore structures. Four types of pores, i.e., organic matter (OM) pores, interparticle (InterP) pores, intraparticle (IntraP) pores and micro-fractures are identified in the shale reservoir. Among them, intraP pores and micro-fractures are the major pore types. Slit-shaped pores are the major shape in the pore system, and the connectivity of the pore-throat system is interpreted to be moderate, which is subordinate to marine shale. The porosity from three dimension (3D) reconstruction of SEM images is lower than the porosity of helium pycnometry, while the porosity trend of the above two methods is the same. Combination of mercury intrusion and gas absorption reveals that nanometer-scale pores provide the main storage space, accounting for 87.16% of the pore volume and 99.85% of the surface area. Micropores contribute 34.74% of the total pore volume and 74.92% of the total pore surface area; and mesopores account for 48.27% of the total pore volume and 24.93% of the total pore surface area; and macropores contribute 16.99% of the total pore volume and 0.15% of the total pore surface area. Pores with a diameter of less than 10 nm contribute the most to the pore volume and the surface area, accounting for 70.29% and 97.70%, respectively. Based on single factor analysis, clay minerals are positively related to the volume and surface area of micropores, mesopores and macropores, which finally control the free gas in pores and adsorbed gas content on surface area. Unlike marine shale, TOC contributes little to the development of micropores. Brittle minerals inhibit pore development of Taiyuan shale, which proves the influence of clay minerals in the pore system. 相似文献
5.
The microstructure of black siliceous shale from the lower Cambrian Niutitang Formation, Sichuan Basin in China was investigated by the combination of field emission scanning electron microscope (FE-SEM) and argon ion beam milling. The nanometer-to micrometer-scale pore systems of shales are an important control on gas storage and fluid migration. In this paper, the organic porosity in shale samples within oil and gas window has been investigated, and the formation mechanism and diagenetic evolution of nanopores have been researched.FE-SEM reveals five pore types that are classified as follows: organic nanopores, pores in clay minerals, nanopores of framework minerals, intragranular pores in microfossils, and microfractures. Numerous organic nanopores are observed in shales in the gas window, whereas microfractures can be seen within the organic matter of shales in the oil window. Microfractures in oil window shales could be attributed to pressure buildup in the organic matter when incompressible liquid hydrocarbon are generated, and the orientation of microfractures is probably parallel to the bedding and strength anisotropy of the formation. Pores in clay minerals are always associated with the framework of clay flakes, and develop around rigid mineral grains because the pressure shadows of mineral grains protect pores from collapse, and the increasing of silt content would lead to an increase in pressure shadows and improve porosity. Nanopores of rock framework are probably related to dissolution by acidic fluids from hydrocarbon generation, and the dissolution-related pores promote permeability of shales. Porosity in the low-TOC, low-thermal-maturity shales contrast greatly with those of high-TOC, high-thermal-maturity shales. While the high-TOC shales contain abundant organic microporosity, the inorganic pores can contribute a lot to the porosity of the low-TOC shales. 相似文献
6.
When trying to improve gas productivity from unconventional sources a first aim is to understand gas storage and gas flow potential through the rock by investigating the microstructure, mineralogy and matrix porosity of unfractured shale. The porosity and mineralogy of the Mulgrave Shale member of the Whitby Mudstone Formation (UK) were characterized using a combination of microscopy, X-ray diffraction and gas adsorption methods on samples collected from outcrops. The Whitby Mudstone is an analogue for the Dutch Posidonia Shale which is a possible unconventional source for gas. The Mulgrave shale member of the Whitby Mudstone Formation can microstructurally be subdivided into a fossil rich (>15%) upper half and a sub-mm mineralogically laminated lower half. All clasts are embedded within a fine-grained matrix (all grains < 2 μm) implying that any possible flow of gas will depend on the porosity and the pore network present within this matrix. The visible SEM porosity (pore diameter > 100 nm) is in the order of 0.5–2.5% and shows a non-connected pore network in 2D. Gas adsorption (N2, Ar, He) porosity (pore diameters down to 2 nm) has been measured to be 0.3–7%. Overall more than 40% of the visible porosity is present within the matrix. Comparing the Whitby Mudstone Formation to other (producing) gas shales shows that the rock plots in the low porosity and high clay mineral content range, which could imply that Whitby Mudstone shales could be less favourable to mechanical fracturing than other gas shales. Estimated permeability indicates values in the micro-to nano-darcy range. 相似文献
7.
Ever since a breakthrough of marine shales in China, lacustrine shales have been attracting by the policy makers and scientists. Organic-rich shales of the Middle Jurassic strata are widely distributed in the Yuqia Coalfield of northern Qaidam Basin. In this paper, a total of 42 shale samples with a burial depth ranging from 475.5 m to 658.5 m were collected from the Shimengou Formation in the YQ-1 shale gas borehole of the study area, including 16 samples from the Lower Member and 26 samples from the Upper Member. Geochemistry, reservoir characteristics and hydrocarbon generation potential of the lacustrine shales in YQ-1 well were preliminarily investigated using the experiments of vitrinite reflectance measurement, maceral identification, mineralogical composition, carbon stable isotope, low-temperature nitrogen adsorption, methane isothermal adsorption and rock eval pyrolysis. The results show that the Shimengou shales have rich organic carbon (averaged 3.83%), which belong to a low thermal maturity stage with a mean vitrinite reflectance (Ro) of 0.49% and an average pyrolytic temperature of the generated maximum remaining hydrocarbon (Tmax) of 432.8 °C. Relative to marine shales, the lacustrine shales show low brittleness index (averaged 34.9) but high clay contents (averaged 55.1%), high total porosities (averaged 13.71%) and great Langmuir volumes (averaged 4.73 cm−3 g). Unlike the marine and marine-transitional shales, the quartz contents and brittleness index (BI) values of the lacustrine shales first decrease then increase with the rising TOC contents. The kerogens from the Upper Member shales are dominant by the oil-prone types, whereas the kerogens from the Lower Member shales by the gas-prone types. The sedimentary environment of the shales influences the TOC contents, thus has a close connection with the hydrocarbon potential, mineralogical composition, kerogen types and pore structure. Additionally, in terms of the hydrocarbon generation potential, the Upper Member shales are regarded as very good and excellent rocks whereas the Lower Member shales mainly as poor and fair rocks. In overall, the shales in the top of the Upper Member can be explored for shale oil due to the higher free hydrocarbon amount (S1), whereas the shales in the Lower Member and the Upper Member, with the depths greater than 1000 m, can be suggested to explore shale gas. 相似文献
8.
The Qiongdongnan Basin and Zhujiang River(Pearl River) Mouth Basin, important petroliferous basins in the northern South China Sea, contain abundant oil and gas resource. In this study, on basis of discussing impact of oil-base mud on TOC content and Rock-Eval parameters of cutting shale samples, the authors did comprehensive analysis of source rock quality, thermal evolution and control effect of source rock in gas accumulation of the Qiongdongnan and the Zhujiang River Mouth Basins. The contrast analysis of TOC contents and Rock-Eval parameters before and after extraction for cutting shale samples indicates that except for a weaker impact on Rock-Eval parameter S_2, oil-base mud has certain impact on Rock-Eval S_1, Tmax and TOC contents. When concerning oil-base mud influence on source rock geochemistry parameters, the shales in the Yacheng/Enping,Lingshui/Zhuhai and Sanya/Zhuhai Formations have mainly Type Ⅱ and Ⅲ organic matter with better gas potential and oil potential. The thermal evolution analysis suggests that the depth interval of the oil window is between 3 000 m and 5 000 m. Source rocks in the deepwater area have generated abundant gas mainly due to the late stage of the oil window and the high-supper mature stage. Gas reservoir formation condition analysis made clear that the source rock is the primary factor and fault is a necessary condition for gas accumulation. Spatial coupling of source, fault and reservoir is essential for gas accumulation and the inside of hydrocarbon-generating sag is future potential gas exploration area. 相似文献
9.
Much attention have been recently paid to the upper Ordovician Wufeng shale (O3w) and lower Silurian Longmaxi shale (S1l) in the Jiaoshiba area of Sichuan Basin, which is now the largest producing shale gas field in China. Field emission scanning electron microscopy (FE-SEM), low pressure gas (N2 and CO2) adsorption, helium pycnometry, X-ray diffraction and geochemical analyses were performed to investigate the pore structure and fractal dimension of the pores in O3w-S1l shale formation in the Jiaoshiba area. FE-SEM images show that organic matter (OM) pores are dominant in the organic-rich samples and these pores are often irregular, bubble-like, elliptical and faveolate in shape, while in organic-poor samples, limited and isolated interparticle (interP), intraparticle (intraP) and OM pores are observed. Reversed S-shaped isotherms obtained from nitrogen adsorption are type Ⅱ, and hysteresis loops indicate that the shape of micropore in the samples is slit-or plate-like. BET surface areas and total pore volume vary from 12.2 to 27.1 m2/g and from 1.8 × 10−2 to 2.9 × 10−2 cm3/g, with an average of 19.5 m2/g and 2.3 × 10−2 cm3/g, respectively. Adsorption volume from both N2 and CO2 adsorption increases with respect to TOC contents. Porosities obtained from helium porosimetry are comparable with these from gas (CO2 and N2) adsorption in O3w-S1l shale. However, porosity determined by quantitative FE-SEM analysis is much smaller, which is mainly related to limited resolution and the small areas of investigation.Based on the Frenkel-Halsey-Hill (FHH) model of low-pressure N2 adsorption, fractal dimensions of the pores varied from 2.737 to 2.823. Relationships between pore structure parameters and TOC content, mineral composition and fractal dimension reveal that the fractal dimension is mainly associated with micropores. Samples with higher TOC content, higher quartz content and lower clay content tend to contain more heterogeneous micropores, resulting in higher fractal dimensions and more complicated pore structure in shales. Therefore, fractal dimension is an effective parameter to reflect the complexity of pore structure and the degree of micropore development in O3w-S1l shale. 相似文献
10.
Organic shales deposited in a continental environment are well developed in the Ordos Basin, NW China, which is rich in hydrocarbons. However, previous research concerning shales has predominantly focused on marine shales and barely on continental shales. In this study, geochemical and mineralogical analyses, high-pressure mercury intrusion and low-pressure adsorption were performed on 18 continental shale samples obtained from a currently active shale gas play, the Chang 7 member of Yanchang Formation in the Ordos Basin. A comparison of all these techniques is provided for characterizing the complex pore structure of continental shales.Geochemical analysis reveals total organic carbon (TOC) values ranging from 0.47% to 11.44%, indicating that there is abundant organic matter (OM) in the study area. Kerogen analysis shows vitrinite reflectance (Ro) of 0.68%–1.02%, indicating that kerogen is at a mature oil generation stage. X-ray diffraction mineralogy (XRD) analysis indicates that the dominant mineral constituents of shale samples are clay minerals (which mainly consist of illite, chlorite, kaolinite, and negligible amounts of montmorillonite), quartz and feldspar, followed by low carbonate content. All-scale pore size analysis indicates that the pore size distribution (PSD) of shale pores is mainly from 0.3 to 60 nm. Note that accuracy of all-scale PSD analysis decreases for pores less than 0.3 nm and more than 10 μm. Experimental analysis indicates that mesopores (2–50 nm) are dominant in continental shales, followed by micropores (<2 nm) and macropores (50 nm–10 μm). Mesopores have the largest contribution to pore volume (PV) and specific surface area (SSA). In addition, plate- and sheet-shaped pores are dominant with poor connectivity, followed by hybrid pores. Results of research on factors controlling pore structure development show that it is principally controlled by clay mineral contents and Ro, and this is different from marine systems. This study has important significance in gaining a comprehensive understanding of continental shale pore structure and the shale gas storage–seepage mechanism. 相似文献
11.
As shale oil occurs primarily in micro–nano pores and fractures, research about the effect of pore structure on shale oil accumulation has great significance for shale oil exploration and development. The effect of pore structure on shale oil accumulation in the lower third member of the Shahejie formation (Es3l), Zhanhua Sag, eastern China was investigated using gas adsorption, soxhlet extraction, nuclear magnetic resonance (NMR) analysis, and field emission scanning electron microscope (FE-SEM) observation. The results indicated that the samples contained a larger amount of ink-bottle-shaped and slit-shaped pores after extraction than before extraction. The pore volume and specific surface area of the samples were approximately 2.5 times larger after extraction than before extraction. Residual hydrocarbon occurred primarily in the free-state form in pores with diameters of 10–1000 nm, which can provide sufficient pore volume for free hydrocarbon accumulation. Therefore, pores with diameters of 10–1000 nm were regarded as “oil-enriched pores”, which are effective pores for shale oil exploration, whereas pores with diameters smaller than 10 nm were regarded as “oil-ineffective pores”. Samples with only well-developed small pores with diameters smaller than 1000 nm showed high oil saturation, whereas samples with both small pores and also relatively large pores and micro-fractures presented low oil saturation. As the minimum pore size allowing fluid expulsion is 1000 nm, pores with diameters greater than 1000 nm were considered as “oil-percolated pores”. Large pores and micro-fractures are generally interconnected and may even form a complex fracture mesh, which greatly improves the permeability of shale reservoirs and is beneficial to fluid discharge. 相似文献
12.
The pore size classification (micropore <2 nm, mesopore 2–50 nm and macropore >50 nm) of IUPAC (1972) has been commonly used in chemical products and shale gas reservoirs; however, it may be insufficient for shale oil reservoirs. To establish a suitable pore size classification for shale oil reservoirs, the open pore systems of 142 Chinese shales (from Jianghan basin) were studied using mercury intrusion capillary pressure analyses. A quantitative evaluation method for I-micropores (0–25 nm in diameter), II-micropores (25–100 nm), mesopores (100–1000 nm) and macropores (>1000 nm) within shales was established from mercury intrusion curves. This method was verified using fractal geometry theory and argon-ion milling scanning electron microscopy images. Based on the combination of pore size distribution with permeability and average pore radius, six types (I-VI) shale open pore systems were analyzed. Moreover, six types open pore systems were graded as good, medium and poor reservoirs. The controlling factors of pore systems were also investigated according to shale compositions and scanning electron microscopy images. The results show that good reservoirs are composed of shales with type I, II and III pore systems characterized by dominant mesopores (mean 68.12 vol %), a few macropores (mean 7.20 vol %), large porosity (mean 16.83%), an average permeability of 0.823 mD and an average pore radius (ra) of 88 nm. Type IV pore system shales are medium reservoirs, which have a low oil reservoir potential due to the developed II-micropores (mean 57.67 vol %) and a few of mesopores (mean 20.19 vol %). Poor reservoirs (composed of type V and VI pore systems) are inadequate reservoirs for shale oil due to the high percentage of I-micropores (mean 69.16 vol %), which is unfavorable for the flow of oil in shale. Pore size is controlled by shale compositions (including minerals and organic matter), and arrangement and morphology of mineral particles, resulting in the developments of shale pore systems. High content of siliceous mineral and dolomite with regular morphology are advantage for the development of macro- and mesopores, while high content of clay minerals results in a high content of micropores. 相似文献
13.
To study the sedimentary environment of the Lower Cambrian organic-rich shales and isotopic geochemical characteristics of the residual shale gas, 20 black shale samples from the Niutitang Formation were collected from the Youyang section, located in southeastern Chongqing, China. A combination of geochemical, mineralogical, and trace element studies has been performed on the shale samples from the Lower Cambrian Niutitang Formation, and the results were used to determine the paleoceanic sedimentary environment of this organic-rich shale. The relationships between total organic carbon (TOC) and total sulfur (TS) content, carbon isotope value (δ13Corg), trace element enrichment, and mineral composition suggest that the high-TOC Niutitang shale was deposited in an anoxic environment and that the organic matter was well preserved after burial. Stable carbon isotopes and biomarkers both indicate that the organic matter in the Niutitang black shales was mainly derived from both lower aquatic organisms and algaes and belong to type I kerogen. The oil-prone Niutitang black shales have limited residual hydrocarbons, with low values of S2, IH, and bitumen A. The carbon isotopic distribution of the residual gas indicate that the shale gas stored in the Niutitang black shale was mostly generated from the cracking of residual bitumen and wet gas during a stage of significantly high maturity. One of the more significant observations in this work involves the carbon isotope compositions of the residual gas (C1, C2, and C3) released by rock crushing. A conventional δ13C1–δ13C2 trend was observed, and most δ13C2 values of the residual gases are heavier than those of the organic matter (OM) in the corresponding samples, indicating the splitting of ethane bonds and the release of smaller molecules, leading to 13C enrichment in the residual ethane. 相似文献
14.
Studying complex pore structures is the key to understanding the mechanism of shale gas accumulation. FIB-SEM (focused ion beam-scanning electron microscope) is the mainstream and effective instrument for imaging nanopores in gas shales. Based on this technology, 2D and 3D characteristics of shale samples from Lower Silurian Longmaxi formation in southern Sichuan Basin were investigated. 2D experimental results show that the pores in shale are nanometer-sized, and the structure of those nanopores can be classified into three types: organic pores, inorganic pores and micro fractures. Among the three types, organic pores are dominantly developed in the OM (organic matter) with three patterns such as continuous distributed OM, OM between clay minerals and OM between pyrite particles, and the size of organic pores range from 5 nm to 200 nm.Inveresly, inorganic pores and micro fractures are less developed in the Longmaxi shales. 3D digital rocks were reconstructed and segmented by 600 continuous images by FIB cutting and SEM imaging simultaneously. The pore size distribution and porosity can be calculated by this 3D digital core, showing that its average value is 32 nm and porosity is 3.62%.The 3D digital porosity is higher than its helium porosity, which can be regarded as one important parameter for evaluation of shale gas reserves. The 2D and 3D characterized results suggest that the nanometer-sized pores in organic matter take up the fundamental storage space for the Longmaxi shale. These characteristics have contributed to the preservation of shale gas in this complex tectonic area. 相似文献
15.
Currently, the Upper Ordovician Wufeng (O3w) and Lower Silurian Longmaxi (S1l) Formations in southeast Sichuan Basin have been regarded as one of the most important target plays of shale gas in China. In this work, using a combination of low-pressure gas adsorption (N2 and CO2), mercury injection porosimetry (MIP) and high-pressure CH4 adsorption, we investigate the pore characteristics and methane sorption capacity of the over-mature shales, and discuss the main controlling factors for methane sorption capacity and distribution of methane gas in pore spaces.Low pressure CO2 gas adsorption shows that micropore volumes are characterized by three volumetric maxima (at about 0.35, 0.5 and 0.85 nm). The reversed S-shaped N2 adsorption isotherms are type Ⅱ with hysteresis being noticeable in all the samples. The shapes of hysteresis loop are similar to the H3 type, indicating the pores are slit- or plate-like. Mesopore size distributions are unimodal and pores with diameters of 2–16 nm account for the majority of mesopore volume, which is generally consistent with MIP results. The methane sorption capacities of O3w-S1l shales are in a range of 1.63–3.66 m3/t at 30 °C and 10 MPa. Methane sorption capacity increase with the TOC content, surface area and micropore volume, suggesting organic matter might provide abundant adsorption site and enhance the strong methane sorption capacity. Samples with higher quartz content and lower clay content have larger sorption capacity. Our data confirmed that the effects of temperature and pressure on methane sorption capacity of shale formation are opposite to some extent, suggesting that, during the burial or uplift stage, the gas sorption capacity of hydrocarbon reservoirs can be expressed as a function of burial depth. Based on the adsorption energy theory, when the pore diameter is larger than 2 nm, much methane molecular will be adsorbed in pores space with distance to pore wall less than 2 nm; while free gas is mainly stored in the pore space with distance to pore wall larger than 2 nm. Distributions of adsorption space decrease with the increasing pore size, while free gas volume increase gradually, assuming the pore are cylindrical or sphere. Particularly, when the pore size is larger than 30 nm, the content of adsorbed gas space volume is very low and its contribution to the all gas content is negligible. 相似文献
16.
Zhanhua Sag is a widely accepted target zone with huge exploration and development potential for shale oil and shale gas resources. Many detailed studies have been undertaken around the geochemistry of the lower section of the third member of the Shahejie Formation (Es3x), while few studies have focused on the reservoir. In this study, based on the mineralogical features and geochemical characteristics, and by using statistical methods, the characteristics and controlling factors of reservoir space of mudstone and shale in Es3x in the Zhanhua Sag are explored through field-emission scanning electron microscopy (FE-SEM), high pressure mercury injection capillary pressure (MICP), and nuclear magnetic resonance (NMR) techniques. Three major findings were obtained. ① There are micropores and microfractures in the reservoir space, which include intergranular pores, clay intercrystal pores, pyrite intercrystal pores, dissolved pores, structural microfractures, and bedding microfractures. ② According to the features of pore size distribution (PSD), the pore distribution can be divided into the following three categories: 0–50 nm, 50 nm–2 μm, and >2 μm; the average volumes of these components are 0.01079 mL g−1, 0.00361 mL g−1, and 0.00355 mL g−1, respectively, thus showing that the pores whose radii are distributed at 0–50 nm form the most important reservoir space (though those with the 50 nm–2 μm and >2 μm radii are also important and cannot be ignored). ③ There are different controlling factors when it comes to different scale pores. Based on statistics and FE-SEM results, the dissolved pores in calcite were determined to be the controlling factor for the 0–50 nm portion, the intercrystalline pores in clay and pyrite, and intergranular pores between authigenic minerals (calcite, dolomite, and pyrite) and clastic minerals (calcite and dolomite) were determined to be the controlling factors for the 50 nm–2 μm portion, and the structural microfractures and bedding microfractures were determined to be the main factors for the >2 μm portion. Furthermore, it is the brittle minerals content and bedded structure that control the microfractures. This study thus clarifies the types and characteristics of reservoir space and identifies pore structure controlling factors of mudstone and shale in Es3x in the Zhanhua Sag; this information has important significance for future reservoir evaluations. 相似文献
17.
The Lower Silurian Longmaxi Shale in the southeastern Upper Yangtze Region, which has been the main target for shale gas exploration and production in China, is black marine organic-rich shale and rich in graptolites. Graptolites, usually only periderms preserved in shales, are important organic component of the Longmaxi Shale. However, the pore structure of graptolite periderms and its contribution to gas storage has not yet been studied before. A combination of optical microscopy for identification and “mark” of graptolite and scanning electron microscope (SEM) for pore observations were conducted for the Longamxi Shale samples. Results show that pores are anisotropic developed in the Longmaxi graptolite periderms and greatly associated with their fine structure. Micrometer-sized fractures and spindle-shaped pores between cortical fibrils in the cortical bandage are greatly developed at section parallel to the bedding, while they are rare at section perpendicular to the bedding. Besides, numerous sapropel detritus rich in nanometer-sized pores are discretely distributed in the shale. Though graptolite periderms are low porosity from SEM image analysis, microfractures and elongated pores along the graptolite periderm wall may still make the graptolite an interconnected system. Together with the discrete porous sapropel detritus in shale, these graptolite-derived Organic Matter (OM) may form an interconnected organic pore system in the shale. The difference of pore development observed in graptolite periderms and sapropel detritus also give us new insight for the organic pore heterogeneity study. The OM composition, their fine structure and orientation in the rock may be important factors controlling OM pore development. The combination of identifying OM type under optical microscopy and pores observation under SEM for may be an effective method to study the OM pore development especially in shale that contain more OM. 相似文献
18.
Understanding the pore structure characteristics of tight gas sandstones is the primary purpose of reservoir evaluation and efforts to characterize tight gas transport and storage mechanisms and their controls. Due to the various pore types and multi-scale pore sizes in tight reservoirs, it is essential to combine several techniques to characterize pore structure. Scanning electron microscopy (SEM), nitrogen gas adsorption (N2GA), mercury intrusion porosimetry (MIP) and nuclear magnetic resonance (NMR) were conducted on tight sandstones from the Lower Cretaceous Shahezi Formation in the northern Songliao Basin to investigate pore structure characteristics systematically (e.g., type and size distribution of pores) and to establish how significant porosity and permeability are for different pore types. The studied tight sandstones are composed of intergranular pores, dissolution pores and intercrystalline pores. The integration of N2GA and NMR can be used as an efficient method to uncover full pore size distribution (PSD) of tight sandstones, with pore sizes ranging from 2 nm to dozens of microns. The full PSDs indicate that the pore sizes of tight sandstones are primarily distributed within 1.0 μm. With an increase in porosity and permeability, pores with larger sizes contribute more to porosity. Intercrystalline pores and intergranular/dissolution pores can be clearly distinguished on the basis of mercury intrusion and surface fractal. The relative contribution of intercrystalline pores to porosity ranges from 58.43% to 91.74% with an average of 79.74%. The intercrystalline pores are the primary contributor to pore space, whereas intergranular/dissolution pores make a considerably greater contribution to permeability. A specific quantity of intergranular/dissolution pores is the key to producing high porosity and permeability in tight sandstone reservoirs. The new two permeability estimation models show an applicable estimation of permeability with R2 values of 0.955 and 0.962 for models using Dmax (pore diameter corresponding to displacement pressure) and Df (pore diameter at inflection point), respectively. These results indicate that both Dmax and Df are key factors in determining permeability. 相似文献
19.
Mineral types (detrital and authigenic) and organic-matter components of the Ordovician-Silurian Wufeng and Longmaxi Shale (siliceous, silty, argillaceous, and calcareous/dolomitic shales) in the Sichuan Basin, China are used as a case study to understand the control of grain assemblages and organic matter on pores systems, diagenetic pathway, and reservoir quality in fine-grained sedimentary rocks. This study has been achieved using a combination of petrographic, geochemical, and mercury intrusion methods. The results reveal that siliceous shale comprises an abundant amount of diagenetic quartz (40–60% by volume), and authigenic microcrystalline quartz aggregates inhibit compaction and preserve internal primary pores as rigid framework for oil filling during oil window. Although silty shale contains a large number of detrital silt-size grains (30–50% by volume), which is beneficial to preserve interparticle pores, the volumetric contribution of interparticle pores (mainly macropores) is small. Argillaceous shale with abundant extrabasinal clay minerals (>50% by volume) undergoes mechanical and chemical compactions during burial, leading to a near-absence of primary interparticle pores, while pores preserved between clay platelets are dominant with more than 10 nm in pore size. Pore-filling calcite and dolomite precipitated during early diagenesis inhibit later compaction in calcareous/dolomitic shale, but the cementation significantly reduces the primary interparticle pores. Pore-throat size distributions of dolomitic shale show a similar trend with silty shale. Besides argillaceous shale, all of the other lithofacies are dominated by OM pores, which contribute more micropores and mesopores and is positively related to TOC and quartz contents. The relationship between pore-throat size and pore volume shows that most pore volumes are provided by pore throats with diameters <50 nm, with a proportion in the order of siliceous (80.3%) > calcareous/dolomitic (78.4%) > silty (74.9%) > argillaceous (61.3%) shales. In addition, development degree and pore size of OM pores in different diagenetic pathway with the same OM type and maturity show an obvious difference. Therefore, we suggest that the development of OM pores should take OM occurrence into account, which is related to physical interaction between OM and inorganic minerals during burial diagenesis. Migrated OM in siliceous shale with its large connected networks is beneficial for forming more and larger pores during gas window. The result of the present work implies that the study of mineral types (detrital and authigenic) and organic matter-pores are better understanding the reservoir quality in fine-grained sedimentary rocks. 相似文献
20.
Shale adsorption and breakthrough pressure are important indicators of shale gas development and key factors in evaluating the reservoir capacities of shales. In this study, geochemical tests, pore-structure tests, methane adsorption tests, and breakthrough-pressure tests were conducted on shales from the Carboniferous Hurleg Formation in eastern Qaidam Basin. The effects of the shale compositions and pore structures on the adsorption and breakthrough pressures were studied, and the reservoir capacities of the shales were evaluated by analyzing the shale adsorptions and sealing effects. The results indicate that the organic carbon content was only one of factors in affecting the adsorption capacity of the shale samples while the effect of the clay minerals was limited. Based on the positive correlation between the adsorption capacity and specific surface area of the shale, the specific surface area of the micropores can be used as an indicator to determine the adsorption capacity of shale. The micro-fracturing of brittle minerals, such as quartz, create a primary path for shale gas breakthrough, whereas the expansion of clay minerals with water greatly increases the breakthrough pressure in the shale samples. Methane adsorption tests showed that maximum methane adsorption for shale samples Z045 and S039 WAS 0.107 and 0.09655 mmol/g, respectively. The breakthrough pressure was 39.36 MPa for sample S039, maintained for 13 days throughout the experiment; however, no breakthrough was observed in sample Z045 when subjected to an injected pressure of 40 MPa for 26 days. This indicates that sample Z045, corresponding to a depth of 846.24 m, exhibited higher adsorption capacity and a better reservoir-sealing effect than sample S039 (498.4 m depth). This study provides useful information for future studies of Qaidam Basin shale gas exploration and development and for evaluation of shale quality. 相似文献