共查询到20条相似文献，搜索用时 666 毫秒
1.
The performance of different nonlinear modelling strategies to simulate the response of RC columns subjected to axial load combined with cyclic biaxial horizontal loading is compared. The models studied are classified into two categories according to the nonlinearity distribution assumed in the elements: lumped-plasticity and distributed inelasticity. For this study, results of tests on 24 columns subjected to cyclic uniaxial and biaxial lateral displacements were numerically reproduced. The analyses show that the global envelope response is satisfactorily represented with the three modelling strategies, but significant differences were found in the strength degradation for higher drift demands and energy dissipation. 相似文献
2.
预应力混凝土空间框架节点二维拟静力试验研究 总被引：1，自引：0，他引：1
采用拟静力试验方法对预应力混凝土和普通钢筋混凝土空间框架内节点进行了不同轴压比下单、双向循环加载的试验研究,得到不同加载方式下试件的滞回曲线。分析了各个试件的破坏形式、承载力、刚度、延性及耗能能力,通过比较和对滞回曲线的分析得出：双向水平荷载作用对构件耦合作用明显,构件存在扭转效应,构件的强度退化和刚度退化比单向荷载作用严重,节点的耗能能力降低。 相似文献
3.
《Soil Dynamics and Earthquake Engineering》2012,33(1):56-70
We present the development and calibration of a macroelement model that captures the response of piles in cohesionless soils subjected to biaxial lateral loading. The model is founded on actual physical mechanism of soil resistance and provides the framework for extending a uniaxial model to biaxial case by means of a single cross-stiffness parameter. Both upper and lower bounds for the cross-stiffness parameter are also presented. The model is calibrated and verified using three-dimensional finite element (FE) simulations of soil-pile interaction for uniformly prescribed displacement along the pile length. Comparison of predictions from uniaxial and biaxial models with the FE results for transient loading indicates that the response assuming no coupling between the two horizontal directions for biaxial loading can differ significantly from the ‘true’ response for some cases. Accounting for coupling in the lateral direction, the proposed model captures the transverse pile response with very good accuracy while retaining the simplicity and computational efficiency of macroelement formulations compared to 3D FE analyses. 相似文献
4.
The cyclic behaviour of reinforced concrete columns has been the subject of many experimental studies in recent years. However, most of these studies have focused on the unidirectional loading of columns with square cross‐sections under constant axial loading conditions. In the present study, four types of full‐scale quadrangular building columns were tested under different types of loading, including uniaxial and biaxial loading conditions. The first two specimens of each column type were independently cyclically tested in the strong and weak directions. Bidirectional tests using different loading paths were performed on the other column specimens. All columns were tested under constant axial loading conditions. In this paper, the experimental results are presented, and the global behaviour of tested columns is discussed, particularly focusing on the stiffness and strength degradation because of the increasing cyclic demand. Finally, the deformation‐based performance limits proposed in Part 3 of Eurocode 8 were calculated and compared with the experimental results. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
5.
In order to effectively utilize results from quasi-static cyclic testing on structural components for the earthquake-induced collapse risk quantification of structures, the need exists to establish collapse-consistent loading protocols representing the asymmetric lateral drift demands of structures under low-probability of occurrence earthquakes. This paper summarizes the development of such protocols for experimental testing of steel columns prone to inelastic local buckling. The protocols are fully defined with a deformation- and a force-controlled parameter. They are generally applicable to quantify the capacity and demands of steel columns experiencing constant and variable axial load coupled with lateral drift demands. Through rigorous nonlinear earthquake collapse simulations, it is found that the building height, the column's local slenderness ratio, and ground motion type have the largest influence on the dual-parameter loading protocol indexes. Comprehensive comparisons with measured data from full-scale shake table collapse tests suggest that unlike routinely used symmetric cyclic loading histories, the proposed loading protocol provides sufficient information for modeling strength and stiffness deterioration in steel columns at large inelastic deformations. 相似文献
6.
Damage to elevated water tanks in past earthquakes can be attributed to the poor performance of their supporting frame staging. In order to ascertain the performance of these elevated water tanks, it is crucial to categorize the damage in quantifiable damage states. Among various parameters to quantify the damage states, the top drift of frame staging can be conveniently correlated to the different damage levels. In literature, drift limits corresponding to different damage states of the frame staging of the elevated water tank are not available. In the present study, drift limits for RC frame staging in elevated water tanks corresponding to different seismic damage states have been proposed. Various damage states of the elevated water tank have been determined using the Park and Ang damage index. The Park and Ang damage index utilizes results of both pushover analysis and incremental dynamic analysis. Twelve models of elevated water tanks have been developed considering variation in staging height and tank capacity. Incremental dynamic analysis has been performed using the suite of twelve actual earthquake ground motions. Based on the regression analysis between damage indexes and drift, limiting drift values for each damage state are proposed. 相似文献
7.
In this paper, a fiber beam-column element considering flexure–shear interaction and bond-slip effect is developed for cyclic analysis of reinforced concrete (RC) structures. The element is based on conventional displacement-based Timoshenko beam theory, where the transverse shear deformation is included, and adopts the fiber model to describe the section force–deformation behavior. In the fiber model, shear deformation is assumed to be uniformly distributed along the section and is only resisted by concrete, thus the multi-dimensional concrete damage model is used for concrete fibers and therefore flexure–shear interaction is reflected naturally at the material level. Meanwhile, to account for the significant bond-slip effect at critical regions, the anchorage slip of bars at these regions is analytically derived. Then it is used to modify the uniaxial stress–strain model for steel fibers by assuming that the total strain can be treated as the sum of the bar deformation and anchorage slip, therefore the bond-slip effect is implicitly but simply represented. To validate the proposed element, a series of RC member and structure tests under cyclic loading are simulated. The results indicate that the proposed element can predict cyclic responses of RC structures, and can be used as a reliable tool for analysis of RC structures. 相似文献
8.
为量化地震作用下钢筋混凝土（RC）柱损伤情况和变形,并将不同地震破坏状态下RC柱损伤和变形进行分析。从太平洋地震工程研究中心（PEER）数据库中收集91组RC柱抗震试验数据,选取4种广泛应用的构件损伤模型进行计算,将损伤发展曲线与层间位移角发展曲线进行对比分析。对RC柱损伤指标限值进行归一化处理,统计分析后得到不同破坏等级下的位移角限值,并给出了RC柱各破坏等级下的位移角限值与损伤指标限值对应关系。研究结果表明,牛荻涛损伤模型可更准确地评价地震作用下结构构件损伤程度,且与层间位移角发展曲线均呈近似线性增长趋势;不同破坏等级下的位移角限值验算保证率均＞80%,表明本文提出的位移角限值具有一定合理性。 相似文献
9.
钢筋混凝土框架中震可修标准及简化抗震设计方法 总被引：4，自引：1，他引：4
本文对国际上主要建筑抗震设计规范中钢筋混凝土框架可修水准的层间位移角限值进行了比较,讨论了国内的一些相关研究结果,结合中国抗震规范确定钢筋混凝土框架中震可修层间位移角限值和屋顶侧移率限值分别为1/150和1/200。采用安全系数的抗震设计表达、论述了对应于结构层间位移角基于承载力的简化抗震设计方法。最后用实例按反应谱分析和弹性时程分析验证了钢筋混凝土框架中震可修层间位移角限值的有效控制作用,初步确定了简化抗震设计方法中梁柱构件的抗震安全系数并分析了提高目前结构抗震安全度的措施。 相似文献
10.
Most of the finite element analyses of reinforced concrete structures are restricted to two‐dimensional elements. Three‐dimensional solid elements have rarely been used although nearly all reinforced concrete structures are under a triaxial stress state. In this work, a three‐dimensional solid element based on a smeared fixed crack model that has been used in the past mainly for monotonic static loading analysis is extended to cater for dynamic analysis. The only material parameter that needs to be input for this model is the uniaxial compressive strength of concrete. Steel bars are modelled as uniaxial elements and an embedded formulation allows them to have any orientation inside the concrete elements. The proposed strategy for loading or unloading renders a numerical procedure which is stable and efficient. The whole process is applied to two RC frames and compared against existing experiments in the literature. Results show that the proposed approach may adequately be used to predict the dynamic response of a structure. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
11.
This paper presents an analytical procedure for determining ductility damage indices using static collapse mechanism analysis for ductile reinforced concrete (RC) frames subjected to prescribed drift limits corresponding to different seismic performance levels. This assessment benefits from performance-based seismic design (PBSD) concept that employs rotation ductility factors, pre-defined target damage indices and beam sidesway mechanism as key performance objectives to estimate curvature ductility demands at pre-designated plastic hinges of beam sidesway mechanism. The proposed ductility-based damage indices (DBDI) assessment procedure considers regular frames with secondary effects such as P-Delta and soil–structure interaction (SSI) within a simple non-iterative process suitable for practical applications. A 12-story RC moment frame was chosen to implement the proposed procedure considering P-Delta effect. Pushover analysis using SAP 2000 was carried out for the frame to verify the results of the DBDI method. The results show that the DBDI seismic assessment procedure can be used to quantify the damage potential at different performance levels and relate that to local flexural ductility of critical frame members. The research presented in this paper provides a simple yet conservative damage assessment tool for use by practicing engineers. 相似文献
12.
Julian Carrillo 《地震工程与结构动力学》2015,44(6):831-848
Widely used damage indices, such as ductility and drift ratios, do not account for the influences of the duration of strong shaking, the cumulative inelastic deformation or energy dissipation in structures. In addition, the formulation and application of most damage indices have until now been based primarily on flexural modes of failure. However, evidence from earthquakes suggests that shear failure or combined shear‐flexure behavior is responsible for a large proportion of failures. Empirical considerations have been made in this paper for evaluating structural damage of low‐rise RC walls under earthquake ground motions by means of a new energy‐based low‐cycle fatigue damage index. The proposed empirical damage index is based on the results of an experimental program that comprised six shake table tests of RC solid walls and walls with openings; results of six companion walls tested under QS‐cyclic loading were used for comparison purposes. Variables studied were the wall geometry, type of concrete, web shear steel ratio, type of web shear reinforcement, and testing method. The index correlates the stiffness degradation and the destructiveness of the earthquake in terms of the duration and intensity of the ground motions. The stiffness degradation model considers simultaneously the increment of damage associated to the low‐cycle fatigue, energy dissipation, and the cumulative cyclic parameters, such as displacement demand and hysteretic energy dissipated. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
13.
Three‐dimensional beam–truss model for reinforced concrete walls and slabs – part 2: modeling approach and validation for slabs and coupled walls 
下载免费PDF全文
下载免费PDF全文 A three‐dimensional beam–truss model (BTM) for reinforced concrete (RC) walls that explicitly models flexure–shear interaction and accurately captures diagonal shear failures was presented in the first part of this two‐paper series. This paper extends the BTM to simulate RC slabs and coupled RC walls through slabs and beams. The inclination angle of the diagonal elements for coupled RC walls is determined, accounting for the geometry of the walls and the level of coupling. Two case studies validate the model: (1) a two‐bay slab–column specimen experimentally tested using cyclic static loading and (2) a five‐story coupled T‐wall–beam–slab specimen subjected to biaxial shake table excitation. The numerically computed lateral force–lateral displacement and strain contours are compared with the experimentally measured response and observed damage. The five‐story specimen is characterized by diagonal shear failure at the bottom story of the walls, which is captured by the BTM. The BTM of the five‐story specimen is used to study the effects of coupling on shear demand for lightly reinforced RC coupled walls. The effect of mesh refinement and bar fracture of non‐ductile transverse reinforcement is studied. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
14.
Biaxial testing of unbonded post‐tensioned rocking bridge piers with external replacable dissipaters
The biaxial response of two bridge piers is experimentally investigated. A post‐tensioned precast bridge pier with external replaceable mild‐steel dissipaters is tested under biaxial loading. The performance of the post‐tensioned bridge pier is compared with a conventionally reinforced monolithic bridge pier. The experimental biaxial response is then compared with previous uniaxial experimental testing of identical bridge piers to understand the influence of biaxial loading, specifically concerning post‐tensioned rocking sections. A 3‐dimensional moment–curvature and moment–rotation analysis program is created to generate the monotonic section response of a conventional and post‐tensioned bridge pier. After comparing the accuracy of the section analysis program to the experimental testing of the monolithic pier, the program is validated against the experimental testing of the post‐tensioned bridge pier. This section analysis program is then used in the calibration of a macro‐model to capture the entire cyclic response of the post‐tensioned bridge pier. The macro‐model adopts multiple linear‐elastic compression‐only springs at the rocking interface, combined with non‐linear inelastic springs for each of the mild‐steel dissipaters and returns encouraging results at both local and global levels. The paper concludes with a number of biaxial moment‐interaction design charts for monolithic and post‐tensioned bridge piers as a function of mechanical and geometric section properties. The design charts define the biaxial yield surface at nominal yield and at the design section capacity defined by one of three material limit states. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
15.
为了对混凝土框架结构的地震破坏机制和抗震性能进行控制,在框架柱中配置高强钢筋,并将纤维增强混凝土(FRC)用于框架结构的预期损伤部位。结构柱中的高强钢筋用来减小结构的残余变形,FRC材料用来增加结构的耗能能力和损伤容限。设计了三个框架,采用动力弹塑性时程分析方法进行分析。研究结果表明,采用高强钢筋提高了结构的整体承载能力,在层间侧移角达到3%之前避免了柱铰的出现(包括底层柱底),并且减小了结构的残余变形;预期损伤部位采用FRC材料能够提高结构的塑性耗能。 相似文献
16.
损伤梁单元及其在RC结构构件非线性分析中的应用 总被引：3，自引：1，他引：2
本文介绍了一种基于损伤力学、断裂力学以及集中塑性理论建立的简化损伤梁单元模型。采用此单元模型,分析了实验梁在单凋加载下的受力性能,并与材料模型和弹塑性单分量模型分析结果进行比较。算例表明简化损伤粱单元模型对于RC结构构件的非线性分析有良好的适应性,可以有效地模拟构件的开裂、屈服和失效全过程;得到直接从力学意义出发的反映结构损伤的损伤内变量,对结构的损伤评估有启发意义。 相似文献
17.
A new simplified modelling strategy to simulate the non‐linear behaviour of reinforced concrete shear walls under dynamic loading is presented. The equivalent reinforced concrete (ERC) model is derived from the framework method and uses lattice meshes for concrete and reinforcement bars and uniaxial constitutive laws based on continuum damage mechanics and plasticity. Results show the capacity of the model to analyse structures having different slenderness and boundary conditions. For low reinforcement ratios however, results are sensitive to the angle formed by the diagonals of the concrete lattice and the horizontal bars. The method is compared with the shear multi‐layered beam model that uses Timoshenko multi‐layered 2D beam elements and biaxial constitutive laws. Comparisons for both models with experimental results of two research programs (one organized by NUPEC and the other by COGEMA and EDF) are provided. ERC is a simplified method that intends to save computer time and allows parametrical studies. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
18.
The reinforced concrete (RC) shear wall serves as one of the most important components sustaining lateral seismic forces. Although they allow advanced seismic performance to be achieved, RC shear walls are rather difficult to repair once the physical plastic hinge at the bottom part has been formed. To overcome this, a damage‐controllable plastic hinge with a large energy dissipation capacity is developed herein, in which the sectional forces are decoupled and sustained separately by different components. The components sustaining the axial and the shear forces all remain elastic even under a rarely occurred earthquake, while the bending components yield and dissipate seismic energy during a design‐level earthquake. This design makes the behavior of the system more predictable and thus more easily customizable to different performance demands. Moreover, the energy dissipation components can be conveniently replaced to fully restore the occupancy function of a building. To examine the seismic behavior of the newly developed component, 3 one third‐scale specimens were tested quasi‐statically, including 1 RC wall complying with the current design codes of China and 2 installed with the damage‐controllable plastic hinges. Each wall was designed to have the same strength. The experimental results demonstrated that the plastic‐hinge‐supported walls had a better energy dissipation capacity and damage controllability than the RC specimen. Both achieved drift ratios greater than 3% under a steadily increasing lateral force. 相似文献
19.
Mehmet Palanci Ali Haydar Kayhan Ahmet Demir 《Bulletin of Earthquake Engineering》2018,16(11):5453-5488
Over the past 20 years, significant socio-economic losses have been encountered in Turkey due to several moderate to large earthquakes. The studies published after the earthquakes concurringly emphasized that multistory reinforced concrete (RC) buildings, mostly 3–7 story ones, collapsed or were heavily damaged as a result of inadequate seismic performance. Global drift ratio demands are mostly used as a representative quantity for determining the behavior of structures when subjected to earthquakes. In this study, three representative mid-rise RC buildings are analyzed by nonlinear time history analysis using code-compatible real ground motion record sets and the calculated global drift ratio demands of these buildings are statistically evaluated. Ground motion record sets compatible with the design spectrum defined for local soil classes in the Turkish Earthquake Code (TEC-2007) are used for the analyses. In order to evaluate the effect of the number of ground motions on drift ratio demands, five different ground motion record sets with 7, 11 and 15 ground motion records are used separately for each local soil class. Results of this study indicate that (1) the dispersion of global drift ratio demands calculated for individual ground motion records in record sets is high, (2) local soil class has no significant effect on dispersion. However, dispersion increases in a direct proportion to the number of ground motion records in a record set, (3) the mean of global drift ratio demands calculated for different ground motion record sets may differ although they are compatible with the same design spectrum, (4) the mean of the drift demands obtained from different ground motion record sets compatible with a particular design spectrum can be accepted as simply random samples of the same population at 95% confidence level. 相似文献
20.
Three‐dimensional beam‐truss model for reinforced concrete walls and slabs – part 1: modeling approach,validation, and parametric study for individual reinforced concrete walls 下载免费PDF全文
下载免费PDF全文 A three‐dimensional beam‐truss model for reinforced concrete (RC) walls developed by the first two authors in a previous study is modified to better represent the flexure–shear interaction and more accurately capture diagonal shear failures under static cyclic or dynamic loading. The modifications pertain to the element formulations and the determination of the inclination angle of the diagonal elements. The modified beam‐truss model is validated using the experimental test data of eight RC walls subjected to static cyclic loading, including two non‐planar RC walls under multiaxial cyclic loading. Five of the walls considered experienced diagonal shear failure after reaching their flexural strength, while the other three walls had a flexure‐dominated response. The numerically computed lateral force–lateral displacement and strain contours are compared with the experimentally recorded response and damage patterns for the walls. The effects of different model parameters on the computed results are examined by means of parametric analyses. Extension of the model to simulate RC slabs and coupled RC walls is presented in a companion paper. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献