共查询到20条相似文献，搜索用时 609 毫秒
1.
Sung-Hoon Ji Kyung Woo Park Doo-Hyun Lim Chunsoo Kim Kyung Su Kim William Dershowitz 《Hydrogeology Journal》2012,20(7):1341-1353
The development and implementation of a hybrid discrete fracture network/equivalent porous medium (DFN/EPM) approach to groundwater flow at the Gyeong-Ju low- and intermediate-level radioactive waste (LILW) disposal site in the Republic of Korea is reported. The geometrical and hydrogeological properties of fractured zones, background fractures and rock matrix were derived from site characterization data and implemented as a DFN. Several DFN realizations, including the deterministic fractured zones and the stochastic background fractures, whose statistical properties were verified by comparison with in-situ fracture and hydraulic test data, were suggested, and they were then upscaled to continuums using a fracture tensor approach for site-scale flow simulations. The upscaled models were evaluated by comparison to in-situ pressure monitoring data, and then used to simulate post-closure hydrogeology for the LILW facility. Simulation results demonstrate the importance of careful characterization and implementation of fractured zones. The study highlighted the importance of reducing uncertainty regarding the properties and variability of natural background fractures, particularly in the immediate vicinity of repository emplacement. 相似文献
2.
基于离散裂隙网络模型的裂隙水渗流计算 总被引：1，自引：1，他引：0
离散裂隙网络模型(Discrete Fracture Network（DFN）)是研究裂隙水渗流最为有效的手段之一。文章根据裂隙几何参数和水力参数的统计分布,利用Monte Carlo随机模拟技术生成二维裂隙网络,基于图论无向图的邻接矩阵判断裂隙网络的连通,利用递归算法提取出裂隙网络的主干网或优势流路径。基于立方定律和渗流连续性方程,利用数值解析法建立了二维裂隙网络渗流模型,分析不同边界条件下裂隙网络中的流体流动。结果表明,该方法可以模拟区域宏观水力梯度和边界条件下,裂隙网络水力梯度方向总的流量,以及节点的水位、节点间的流量和流动方向的变化特征,为区域岩溶裂隙水渗流计算提供了一种实用、可行的方法。 相似文献
3.
岩体裂隙系统渗流场与应力场耦合模型 总被引：15，自引：0，他引：15
仵彦卿 《地质灾害与环境保护》1996,7(1):31-34
岩体系统具有复杂的结构。一般认为，岩体系统是非均质各向异性不连续的多相介质体系。当岩体以裂隙为主，且其分布较密集时，可将岩体系统看作等效连续多相介质体系。本文运用等效连续介质理论，提出了两种岩体裂隙系统渗流场与应力场耦合模型：一是以渗透水压力与隙变形关系、应力与渗透系统数关系为基础，建立渗透系数张量计算公式，进而建立等效效连续介质渗流为数学模型。以裂隙岩体应变张量分析为基础，建立裂隙岩体效应力张量 相似文献
4.
Sven Follin Lee Hartley Ingvar Rhén Peter Jackson Steven Joyce David Roberts Ben Swift 《Hydrogeology Journal》2014,22(2):313-331
The large-scale geological structure of the crystalline rock at the proposed high-level nuclear waste repository site at Forsmark, Sweden, has been classified in terms of deformation zones of elevated fracture frequency. The rock between deformation zones was divided into fracture domains according to fracture frequency. A methodology to constrain the geometric and hydraulic parameters that define a discrete fracture network (DFN) model for each fracture domain is presented. The methodology is based on flow logging and down-hole imaging in cored boreholes in combination with DFN realizations, fracture connectivity analysis and pumping test simulations. The simulations suggest that a good match could be obtained for a power law size distribution where the value of the location parameter equals the borehole radius but with different values for the shape parameter, depending on fracture domain and fracture set. Fractures around 10–100 m in size are the ones that typically form the connected network, giving inflows in the simulations. The report also addresses the issue of up-scaling of DFN properties to equivalent continuous porous medium (ECPM) bulk flow properties. Comparisons with double-packer injection tests provide confidence that the derived DFN formulation of detailed flows within individual fractures is also suited to simulating mean bulk flow properties and their spatial variability. 相似文献
5.
根据岩体中不同区域裂隙发育规模的差异分为连续区域和离散区域,在不同区域中使用不同的地下水运动数学模型,应用区域分解算法来解决这类问题。其中连续区域采用了等效连续介质模型,离散区域采用了随机裂隙网络模型,通过区域公共边界上水位和流量连续的条件将两模型耦合求解。将基于区域分解算法的耦合模型应用于锦屏水电站坝址区三维渗流场的模拟中,通过钻孔观测水位和计算水位的对比发现,该方法是有效的,能够应用于实际工程。 相似文献
6.
Permeability and stress in crystalline rocks 总被引：2，自引：0，他引：2
Groundwater from crystalline rocks is a significant resource in many areas of the world. It is also an important medium for contaminant transport from, for example, deep nuclear waste repositories. Stress distributions in fractured rocks are important in controlling groundwater flow in several ways: (i) palaeostress fields are responsible for the evolution of fracture systems which transmit groundwater; (ii) current in situ stress fields will influence the shape and aperture of fractures; (iii) humans can influence the natural stress field in a rock mass to enhance fracture flows. The significance of stresses for groundwater flow can be investigated by field techniques (hydraulic fracturing), laboratory techniques (stress cells) or by numerical modelling. 相似文献
7.
Estimating the hydraulic properties of fractured aquifers is challenging due to the complexity of structural discontinuities that can generally be measured at a small scale, either in core or in outcrop, but influence groundwater flow over a range of scales. This modeling study uses fracture scanline data obtained from surface bedrock exposures to derive estimates of permeability that can be used to represent the fractured rock matrix within regional scale flow models. The model is developed using PETREL, which traditionally benefits from high resolution data sets obtained during oil and gas exploration, including for example seismic data, and borehole logging data (both lithological and geophysical). The technique consists of interpreting scanline fracture data, and using these data to generate representative Discrete Fracture Network (DFN) models for each field set. The DFN models are then upscaled to provide an effective hydraulic conductivity tensor that represents the fractured rock matrix. For each field site, the upscaled hydraulic conductivities are compared with estimates derived from pumping tests to validate the model. A hydraulic conductivity field is generated for the study region that captures the spatial variability of fracture networks in pseudo-three dimensions from scanline data. Hydraulic conductivities estimated using this approach compare well with those estimated from pumping test data. The study results suggest that such an approach may be feasible for taking small scale fracture data and upscaling these to represent the aquifer matrix hydraulic properties needed for regional groundwater modeling. 相似文献
8.
Fully coupled simulation of a hydraulic fracture interacting with natural fractures with a hybrid discrete‐continuum method 
下载免费PDF全文
下载免费PDF全文 A hybrid discrete‐continuum numerical scheme is developed to study the behavior of a hydraulic fracture crossing natural fractures. The fully coupled hybrid scheme utilizes a discrete element model for an inner domain, within which the hydraulic fracture propagates and interacts with natural fractures. The inner domain is embedded in an outer continuum domain that is implemented to extend the length of the hydraulic fracture and to better approximate the boundary effects. The fracture is identified to propagate initially in the viscosity‐dominated regime, and the numerical scheme is calibrated by using the theoretical plane strain hydraulic fracture solution. The simulation results for orthogonal crossing indicate three fundamental crossing scenarios, which occur for various stress ratios and friction coefficients of the natural fracture: (i) no crossing, that is, the hydraulic fracture is arrested by the natural fracture and makes a T‐shape intersection; (ii) offset crossing, that is, the hydraulic fracture crosses the natural fracture with an offset; and (iii) direct crossing, that is, the hydraulic fracture directly crosses the natural fracture without diversion. Each crossing scenario is associated with a distinct net pressure history. Additionally, the effects of strength contrast and stiffness contrast of rock materials and intersection angle between the hydraulic fracture and the natural fracture are also investigated. The simulations also illustrate that the level of fracturing complexity increases as the number and extent of the natural fractures increase. As a result, we can conclude that complex hydraulic fracture propagation patterns occur because of complicated crossing behavior during the stimulation of naturally fractured reservoirs. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
9.
Karst aquifers exhibit a dual flow system characterized by interacting conduit and matrix domains. This study evaluated the coupled continuum pipe-flow framework for modeling karst groundwater flow in the Madison aquifer of western South Dakota (USA). Coupled conduit and matrix flow was simulated within a regional finite-difference model over a 10-year transient period. An existing equivalent porous medium (EPM) model was modified to include major conduit networks whose locations were constrained by dye-tracing data and environmental tracer analysis. Model calibration data included measured hydraulic heads at observation wells and estimates of discharge at four karst springs. Relative to the EPM model, the match to observation well hydraulic heads was substantially improved with the addition of conduits. The inclusion of conduit flow allowed for a simpler hydraulic conductivity distribution in the matrix continuum. Two of the high-conductivity zones in the EPM model, which were required to indirectly simulate the effects of conduits, were eliminated from the new model. This work demonstrates the utility of the coupled continuum pipe-flow method and illustrates how karst aquifer model parameterization is dependent on the physical processes that are simulated. 相似文献
10.
Estimating regional-scale fractured bedrock hydraulic conductivity using discrete fracture network (DFN) modeling 总被引：1，自引：1，他引：0
Estimating bedrock hydraulic conductivity of regional fractured aquifers is challenging due to a lack of aquifer testing data and the presence of small and large-scale heterogeneity. This study provides a novel approach for estimating the bedrock hydraulic conductivity of a regional-scale fractured bedrock aquifer using discrete fracture network (DFN) modeling. The methodology is tested in the mountainous Okanagan Basin, British Columbia, Canada. Discrete fractures were mapped in outcrops, and larger-scale fracture zones (corresponding to lineaments) were mapped from orthophotos and LANDSAT imagery. Outcrop fracture data were used to generate DFN models for estimating hydraulic conductivity for the fractured matrix (K m). The mountain block hydraulic conductivity (K mb) was estimated using larger-scale DFN models. Lineament properties were estimated by best fit parameters for a simulated pumping test influenced by a fracture zone. Unknown dip angles and directions for lineaments were estimated from the small-scale fracture sets. Simulated K m and K mb values range from 10–8 to 10–7?m/s and are greatest in a N–S direction, coinciding with the main strike direction of Okanagan Valley Fault Zone. K mb values also decrease away from the fault, consistent with the decrease in lineament density. Simulated hydraulic conductivity values compare well with those estimated from pumping tests. 相似文献
11.
Cubic law with aperture-length correlation: implications for network scale fluid flow 总被引：2，自引：2，他引：0
Christian Klimczak Richard A. Schultz Rishi Parashar Donald M. Reeves 《Hydrogeology Journal》2010,18(4):851-862
Previous studies have computed and modeled fluid flow through fractured rock with the parallel plate approach where the volumetric flow per unit width normal to the direction of flow is proportional to the cubed aperture between the plates, referred to as the traditional cubic law. When combined with the square root relationship of displacement to length scaling of opening-mode fractures, total flow rates through natural opening-mode fractures are found to be proportional to apertures to the fifth power. This new relationship was explored by examining a suite of flow simulations through fracture networks using the discrete fracture network model (DFN). Flow was modeled through fracture networks with the same spatial distribution of fractures for both correlated and uncorrelated fracture length-to-aperture relationships. Results indicate that flow rates are significantly higher for correlated DFNs. Furthermore, the length-to-aperture relations lead to power-law distributions of network hydraulic conductivity which greatly influence equivalent permeability tensor values. These results confirm the importance of the correlated square root relationship of displacement to length scaling for total flow through natural opening-mode fractures and, hence, emphasize the role of these correlations for flow modeling. 相似文献
12.
开展地下水数值模拟研究是高放废物处置场地安全评价的重要组成部分,然而深地质处置介质类型的复杂性、基岩深部资料的相对匮乏性导致模拟结果存在不确定性,如何刻画深部地下水动力场并评估可能引起的风险已成为高放废物处置安全评价中重点关注的问题。在大量文献调研的基础上,综述了世界典型国家高放废物深地质处置场地的地下水数值模拟与不确定性分析应用,并归纳总结该领域研究经验,得到以下认识:（1）深地质处置场深部构造、裂隙的发育与展布决定了地下水循环条件,探究适用于基岩裂隙地区新的水文地质试验方法是提高地下水数值模型仿真性的基础;（2）不同尺度模型融合是解决深地质处置地下水模拟的有效技术方法,区域尺度多采用等效连续介质法,场地尺度使用等效连续多孔介质和离散裂隙网络耦合模型,处置库尺度使用离散裂隙网络方法,其次需重点关注未来大时间尺度下放射性核素在地质体中的迁移转化规律,模拟预测场址区域地下水环境长期循环演变对核素迁移的潜在影响;（3）考虑到不同的处置层主岩岩性以及在多介质中发生的THMC（温度场—渗流场—应力场—化学场）过程,目前国内外常用的地下水模拟软件有:Porflow、Modflow、GMS及MT3DMS等用于模拟孔隙或等效连续介质,Connectflow、Feflow及FracMan等用于模拟地下水和核素在结晶岩、花岗岩等裂隙中的迁移,TOUGH系列软件主要应用于双重介质的水流、溶质及热运移模拟;（4）指导开展有针对性的模型和参数的不确定性分析工作,减少投入工作量,提高模型精度,并可针对处置库长期演变、废物罐失效、极端降雨等多情景预测模拟,为处置库安全评价及设计提供基础数据支撑;（5）针对我国深地质处置地下水数值模拟研究现状,下一步应加强区域地质、水文地质、裂隙测量以及现场试验等相关的调查及监测工作,多介质耦合、多场耦合模拟及不确定性分析研究将会是未来的研究重点。 相似文献
13.
14.
米尺度裂隙岩体模型水流-传热试验的数值模拟分析 总被引：1，自引：0，他引：1
为了研究高放射性核废物地下处置库近场的水流-传热耦合问题,采用国内高放废物地下处置库预选场址--甘肃北山地区的花岗岩石块体,加工组合成米尺度的规则裂隙岩体模型,设置边界热源和裂隙水流,试验模拟裂隙水水流与传热之间的相互作用。作为该室内模型试验的前期理论研究,采用等效孔隙介质数值模型,着重分析了裂隙开度、裂隙流量和热源功率对流场和温度场的影响。在设定条件下,计算分析表明：热传导和裂隙水水流由热源作用初期的不耦合很快转化为耦合;不流动的裂隙水主要表现为热存储和热传导,而流动的裂隙水还引起流动传热和水与岩石之间的对流换热,使岩体温度场明显不同于单纯热传导的情况;如果保持裂隙水流量不变,则裂隙开度的变化对水流-传热影响不大;如果保持裂隙水流速不变,则裂隙开度的变化对水流-传热影响显著;热源功率越大,通过裂隙水的热流量越大,裂隙水压强越大,而当温度超过100 ℃时,裂隙水会因汽化而压强显著增大;加热7 d时,热量的输入和输出几乎相等,裂隙水流带走的热量接近热源供给的热量,模型系统基本达到了热平衡。 相似文献
15.
离散裂隙渗流方法与裂隙化渗透介质建模 总被引：4，自引：1，他引：4
流体渗流模拟的连续介质方法通常适用于多孔地质体，并不一定适用于裂隙岩体，由于裂隙分布及其特征与孔隙差异较大。若流体渗流主要受裂隙的控制，对于一定尺寸的裂隙岩体，多孔介质假设则较难刻划裂隙岩体的渗流特征。离散裂隙渗流方法不但可直接用于模拟裂隙岩体非均质性和各向异性等渗流特征，而且可用其确定所研究的裂隙岩体典型单元体及其水力传导（渗透）张量大小。主要讨论了以下问题：（1）饱和裂隙介质中一般的离散流体渗流模拟；（2）裂隙岩体中的REV（典型单元体）及其水力传导（渗透）张量的确定；（3）利用离散裂隙网络流体渗流模型研究裂隙方向几何参数对水力传导系数和REV的影响；（4）在二维和三维离散裂隙流体渗流模型中对区域大裂隙和局部小裂隙的处理方法。调查结果显示离散裂隙流体渗流数学模型可用来评价不同尺度上的裂隙岩体的水力特征，以及裂隙方向对裂隙化岩体的水力特征有着不可忽视的影响。同时，局部小裂隙、区域大裂隙应当区别对待，以便据其所起的作用及水力特征，建立裂隙化岩体相应的流体渗流模型。 相似文献
16.
裂隙介质渗透结构表现为高度的非均质性与各项异性。为了科学有效地预测某核工程场地裂隙地下水的流动规律,揭示裂隙岩体地下水的渗流特性,笔者等采用Pilot Point调参方法与null space Monte Carlo方法（NSMC）,开展了裂隙岩体渗透结构的不确定性分析研究,构建了符合实际水文地质条件的多个渗流数值模型集合。结果表明：该方法获得的各个实现地下水位模拟结果能够与实际观测数据较好吻合,可反映工程场地裂隙地下水动力特征与流动趋势;各个实现的参数化渗透结构在空间上存在一定的差异性,但整体变化趋势是保持一致的,渗透参数的不确定性表现为在实测数据分布区域相对较低,钻孔空白区域相对较高;该方法可以弥补单一、确定性模拟结果在表征裂隙介质渗透结构方面的局限性,有效地降低模型参数的不确定性与随机性。此方法对进一步提升裂隙岩体渗流模拟精度与预测能力,深化裂隙地下水迁移规律的认识具有重要的意义。 相似文献
17.
Wang Mingyu The University of Arizona Tucson Arizona USA Department of Water Resources Environmental Engineering China University of Geosciences Beijing Chen Jinsong Wan Li Department of Water Resources Environmental Engineering 《中国地质大学学报(英文版)》2001,12(3)
ＩＮＴＲＯＤＵＣＴＩＯＮＧｒｏｕｎｄｗａｔｅｒｏｒｆｌｕｉｄｆｌｏｗｍｏｄｅｌｉｎｇｉｎｆｒａｃｔｕｒｅｄｒｏｃｋｓｉｓａｃｏｍｐｌｉｃａｔｅｄｔｈｅｏｒｅｔｉｃａｌａｎｄａｐｐｌｉｅｄｔｏｐｉｃ.Ｂｏｔｈｔｈｅｏｒｅｔｉｃａｌｌｙａｎｄｏｐｅｒａｔｉｏｎａｌｌｙ ,ｉｔｉｓｉｍｐｏｒｔａｎｔｉｎｍａｎｙｆｉｅｌｄｓｓｕｃｈａｓｇｅｏｌｏｇｉｃａｌａｎｄｈｙｄｒｏｇｅｏｌｏｇｉｃａｌｅｎｇｉｎｅｅｒｉｎｇ ,ｅｎｖｉｒｏｎｍｅｎｔａｌｅｎｇｉｎｅｅｒｉｎｇａｎｄｐｅｔｒｏｌｅｕｍｅｎｇｉｎｅｅｒｉｎ… 相似文献
18.
基于DDA方法一种流-固耦合模型的建立及裂隙体渗流场分析和应用 总被引：1，自引：0，他引：1
以非连续变形分析方法（DDA）为基础并采用稳态流体计算方法将二者结合进行裂隙岩体流-固耦合分析。利用DDA方法生成裂隙岩体模型,在此基础上采用矩阵搜索等方法形成新的裂隙水通网络模型。采用稳态迭代算法和立方定律求得裂隙水压力,并把裂隙水压力作为线载荷施加到块体边界,在DDA算法中每个迭代步完成后更新裂隙开度和水压值,与DDA算法结合研究裂隙水与块体之间相互作用关系。利用以上裂隙岩体流-固耦合计算方法研究了某水封油库开挖和运行过程洞室围岩流量和密封性,为该工程预测水封效果提供了有益的主要依据,也是国内首次采用DDA方法做大型工程的流-固耦合模型分析。 相似文献
19.
We present a discussion of the state-of-the-art on the use of discrete fracture networks (DFNs) for modelling geometrical characteristics, geomechanical evolution and hydromechanical (HM) behaviour of natural fracture networks in rock. The DFN models considered include those based on geological mapping, stochastic generation and geomechanical simulation. Different types of continuum, discontinuum and hybrid geomechanical models that integrate DFN information are summarised. Numerical studies aiming at investigating geomechanical effects on fluid flow in DFNs are reviewed. The paper finally provides recommendations for advancing the modelling of coupled HM processes in fractured rocks through more physically-based DFN generation and geomechanical simulation. 相似文献
20.
This paper presents a fracture mapping (FM) approach combined with the extended finite element method (XFEM) to simulate coupled deformation and fluid flow in fractured porous media. Specifically, the method accurately represents the impact of discrete fractures on flow and deformation, although the individual fractures are not part of the finite element mesh. A key feature of FM‐XFEM is its ability to model discontinuities in the domain independently of the computational mesh. The proposed FM approach is a continuum‐based approach that is used to model the flow interaction between the porous matrix and existing fractures via a transfer function. Fracture geometry is defined using the level set method. Therefore, in contrast to the discrete fracture flow model, the fracture representation is not meshed along with the computational domain. Consequently, the method is able to determine the influence of fractures on fluid flow within a fractured domain without the complexity of meshing the fractures within the domain. The XFEM component of the scheme addresses the discontinuous displacement field within elements that are intersected by existing fractures. In XFEM, enrichment functions are added to the standard finite element approximation to adequately resolve discontinuous fields within the simulation domain. Numerical tests illustrate the ability of the method to adequately describe the displacement and fluid pressure fields within a fractured domain at significantly less computational expense than explicitly resolving the fracture within the finite element mesh. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献