共查询到20条相似文献，搜索用时 468 毫秒
1.
裂隙介质渗透结构表现为高度的非均质性与各项异性。为了科学有效地预测某核工程场地裂隙地下水的流动规律,揭示裂隙岩体地下水的渗流特性,笔者等采用Pilot Point调参方法与null space Monte Carlo方法(NSMC),开展了裂隙岩体渗透结构的不确定性分析研究,构建了符合实际水文地质条件的多个渗流数值模型集合。结果表明：该方法获得的各个实现地下水位模拟结果能够与实际观测数据较好吻合,可反映工程场地裂隙地下水动力特征与流动趋势;各个实现的参数化渗透结构在空间上存在一定的差异性,但整体变化趋势是保持一致的,渗透参数的不确定性表现为在实测数据分布区域相对较低,钻孔空白区域相对较高;该方法可以弥补单一、确定性模拟结果在表征裂隙介质渗透结构方面的局限性,有效地降低模型参数的不确定性与随机性。此方法对进一步提升裂隙岩体渗流模拟精度与预测能力,深化裂隙地下水迁移规律的认识具有重要的意义。 相似文献
2.
离散裂隙渗流方法与裂隙化渗透介质建模 总被引：4，自引：1，他引：4
流体渗流模拟的连续介质方法通常适用于多孔地质体，并不一定适用于裂隙岩体，由于裂隙分布及其特征与孔隙差异较大。若流体渗流主要受裂隙的控制，对于一定尺寸的裂隙岩体，多孔介质假设则较难刻划裂隙岩体的渗流特征。离散裂隙渗流方法不但可直接用于模拟裂隙岩体非均质性和各向异性等渗流特征，而且可用其确定所研究的裂隙岩体典型单元体及其水力传导（渗透）张量大小。主要讨论了以下问题：（1）饱和裂隙介质中一般的离散流体渗流模拟；（2）裂隙岩体中的REV（典型单元体）及其水力传导（渗透）张量的确定；（3）利用离散裂隙网络流体渗流模型研究裂隙方向几何参数对水力传导系数和REV的影响；（4）在二维和三维离散裂隙流体渗流模型中对区域大裂隙和局部小裂隙的处理方法。调查结果显示离散裂隙流体渗流数学模型可用来评价不同尺度上的裂隙岩体的水力特征，以及裂隙方向对裂隙化岩体的水力特征有着不可忽视的影响。同时，局部小裂隙、区域大裂隙应当区别对待，以便据其所起的作用及水力特征，建立裂隙化岩体相应的流体渗流模型。 相似文献
3.
开展地下水数值模拟研究是高放废物处置场地安全评价的重要组成部分,然而深地质处置介质类型的复杂性、基岩深部资料的相对匮乏性导致模拟结果存在不确定性,如何刻画深部地下水动力场并评估可能引起的风险已成为高放废物处置安全评价中重点关注的问题。在大量文献调研的基础上,综述了世界典型国家高放废物深地质处置场地的地下水数值模拟与不确定性分析应用,并归纳总结该领域研究经验,得到以下认识:（1）深地质处置场深部构造、裂隙的发育与展布决定了地下水循环条件,探究适用于基岩裂隙地区新的水文地质试验方法是提高地下水数值模型仿真性的基础;（2）不同尺度模型融合是解决深地质处置地下水模拟的有效技术方法,区域尺度多采用等效连续介质法,场地尺度使用等效连续多孔介质和离散裂隙网络耦合模型,处置库尺度使用离散裂隙网络方法,其次需重点关注未来大时间尺度下放射性核素在地质体中的迁移转化规律,模拟预测场址区域地下水环境长期循环演变对核素迁移的潜在影响;（3）考虑到不同的处置层主岩岩性以及在多介质中发生的THMC（温度场—渗流场—应力场—化学场）过程,目前国内外常用的地下水模拟软件有:Porflow、Modflow、GMS及MT3DMS等用于模拟孔隙或等效连续介质,Connectflow、Feflow及FracMan等用于模拟地下水和核素在结晶岩、花岗岩等裂隙中的迁移,TOUGH系列软件主要应用于双重介质的水流、溶质及热运移模拟;（4）指导开展有针对性的模型和参数的不确定性分析工作,减少投入工作量,提高模型精度,并可针对处置库长期演变、废物罐失效、极端降雨等多情景预测模拟,为处置库安全评价及设计提供基础数据支撑;（5）针对我国深地质处置地下水数值模拟研究现状,下一步应加强区域地质、水文地质、裂隙测量以及现场试验等相关的调查及监测工作,多介质耦合、多场耦合模拟及不确定性分析研究将会是未来的研究重点。 相似文献
4.
裂隙岩体中的渗流规律与传统多孔介质渗流规律存在本质的区别,裂隙岩体渗流具有不均匀性、各向异性和非连续性等特点,如何更好地刻画裂隙水渗流的这种特点是当前裂隙水数值模拟的热点与难点。介绍了裂隙岩体地下水渗流特性,对目前裂隙水渗流模型及其优缺点进行比较、分析,同时对主流数值计算方法和数值模拟软件进行概括介绍。 相似文献
5.
裂隙岩体中非饱和渗流与运移的概念模型及数值模拟 总被引：12，自引：2，他引：12
探讨了裂隙岩体中非饱和地下水渗流与溶质运移的几种概念模型的构造及数值模拟问题 ,如裂隙网络模型、连续体模型、等效连续体模型、双孔隙度 (单渗透率 )模型、双渗透率模型、多组份连续体模型等。在裂隙岩体中 ,非饱和地下水的渗流可能只局限于岩体中的岩石组份、或裂隙网络 ,也可能在裂隙和岩石中同时发生 ;对前一种情形只需考虑单一连续体中的流动 ,而后一种情况则需要包括地下水在岩石和裂隙之间的交换。岩体中的裂隙网络往往是溶质运移的主要通道 ;但当溶质在裂隙与岩石之间的渗透和扩散是重要的运移机制时 ,就需要考虑岩石与裂隙界面处的溶质交换。为了模拟岩石与裂隙之间地下水和溶质的交换 ,就需要了解岩石与裂隙之间相互作用的模式和范围 ,使得这类问题的概念模型较单一连续体模型多了一层不确定性、其数值模拟也变得更为困难。因为在实际问题中不易、甚至根本不能判别非饱和渗流的实际形态 ,具体采用哪种模型主要取决于分析的目的和对现场数据的掌握程度。不论哪种模型都会受到模型及参数不确定性的影响 ,因此必须考虑与其他辅助模型的比较. 相似文献
6.
裂隙岩体渗透系数确定方法研究 总被引：3，自引：0，他引：3
裂隙岩体渗透系数以及渗透主方向的确定对研究岩体渗透性大小及各向异性具有重要意义。高放废物地质处置库介质岩体的渗透性能将直接影响其使用安全性。本文运用离散裂隙网络模拟的方法对我国高放废物处置库甘肃北山预选区3#钻孔附近裂隙岩体进行了渗透性质分析。通过对3#钻孔171.5~178.0m段压水试验数据的反演,标定了离散裂隙网络渗流模型中的裂隙渗透参数(导水系数T)。利用标定的离散裂隙网络模型对场区裂隙岩体进行了渗流模拟,确定了该区域裂隙岩体的渗流表征单元体(REV)的尺寸大小以及渗透主值和主渗透方向。运用离散裂隙网络模型计算得出的渗透主值的几何均值与现场压水试验计算结果较接近,证明了计算结果的有效性。 相似文献
7.
裂隙岩体渗流-应力耦合等效渗流阻模型 总被引：2，自引：0，他引：2
针对含区域主干裂隙岩体在应力作用下的渗透特性进行了研究。运用单裂隙平行板渗流理论、弹性力学方法,结合模拟电路知识,提出等效渗流阻的概念。在分析裂隙岩体区域中主干裂隙系统几何构造的基础上,建立了基于等效渗流阻的- 渗流-应力耦合模型,得到了裂隙岩体等效渗流阻、渗透率与应力之间的关系,从而为研究含区域主干裂隙岩体的应力-渗流耦合规律提供了方便。结合一个基于等效渗流阻模型的算例,考察了含“人”字形组合裂隙试样的渗透特性。经进一步细化后,该模型可用于分析地应力作用下的含区域主干裂隙岩体渗流演化规律。 相似文献
8.
高放废物地质处置过程中涉及的核素在围岩裂隙地下水中的迁移问题已引起广泛关注,数值模拟是研究核素粒子运移的重要方法。目前裂隙介质中渗流模型主要是等效连续介质模型、双重介质模型和离散裂隙网络模型。对于岩体尺度裂隙地下水的流动,离散裂隙网络模型能充分表现裂隙介质的各向异性、不连续性等特征。因此,针对裂隙介质准确概化及核素迁移模拟等难点,文章结合Monte Carlo随机生成裂隙方法、裂隙渗流有限元算法和高放射性核素衰变方程等方法,依据花岗岩深钻孔裂隙统计数据,采用离散裂隙网络模型对内蒙古阿拉善高放废物地质处置预选区展开了核素粒子迁移数值模拟研究,并讨论了实例预测分析结果。结果显示:针对设定的地质模型,核素粒子从中心运移到边界的迁移路径长度平均为1293.35 m,粒子运移到边界耗费的时间平均为1.70E+11 d。 相似文献
9.
岩体三维非稳定渗流模型及数值模拟 总被引：2，自引：0，他引：2
地下水是导致地质灾害发生的重要因素之一。岩体本身的复杂性及地下水在岩体内随时间而变化造成地下水在岩体内运动机理的复杂性。文章采用数值模拟方法探索地下水在岩体内的运动规律,了解其致灾机理。以岩体结构力学为基础,运用现代分形理论,建立主干裂隙分形网络;根据裂隙发育规模与工程尺度关系将岩体看作拟连续介质与块裂介质混合介质,并根据两类介质接触处水头相等及节点流量相等建立合理的三维非稳定渗流模型;给出渗流模型的有限元解法,开发出相应的有限元软件;给出算例,计算结果体现了主干裂隙在渗流中的强导水作用及网络状裂隙的贮水功能与渗流滞后效应;强调根据裂隙发育规模与工程尺度关系确定合理渗流模型的重要性。 相似文献
10.
11.
Sung-Hoon Ji Kyung Woo Park Doo-Hyun Lim Chunsoo Kim Kyung Su Kim William Dershowitz 《Hydrogeology Journal》2012,20(7):1341-1353
The development and implementation of a hybrid discrete fracture network/equivalent porous medium (DFN/EPM) approach to groundwater flow at the Gyeong-Ju low- and intermediate-level radioactive waste (LILW) disposal site in the Republic of Korea is reported. The geometrical and hydrogeological properties of fractured zones, background fractures and rock matrix were derived from site characterization data and implemented as a DFN. Several DFN realizations, including the deterministic fractured zones and the stochastic background fractures, whose statistical properties were verified by comparison with in-situ fracture and hydraulic test data, were suggested, and they were then upscaled to continuums using a fracture tensor approach for site-scale flow simulations. The upscaled models were evaluated by comparison to in-situ pressure monitoring data, and then used to simulate post-closure hydrogeology for the LILW facility. Simulation results demonstrate the importance of careful characterization and implementation of fractured zones. The study highlighted the importance of reducing uncertainty regarding the properties and variability of natural background fractures, particularly in the immediate vicinity of repository emplacement. 相似文献
12.
Application of multiple-point geostatistics on modelling groundwater flow and transport in a cross-bedded aquifer (Belgium) 总被引：3，自引：1，他引：2
Sedimentological processes often result in complex three-dimensional subsurface heterogeneity of hydrogeological parameter values. Variogram-based stochastic approaches are often not able to describe heterogeneity in such complex geological environments. This work shows how multiple-point geostatistics can be applied in a realistic hydrogeological application to determine the impact of complex geological heterogeneity on groundwater flow and transport. The approach is applied to a real aquifer in Belgium that exhibits a complex sedimentary heterogeneity and anisotropy. A training image is constructed based on geological and hydrogeological field data. Multiple-point statistics are borrowed from this training image to simulate hydrofacies occurrence, while intrafacies permeability variability is simulated using conventional variogram-based geostatistical methods. The simulated hydraulic conductivity realizations are used as input to a groundwater flow and transport model to investigate the effect of small-scale sedimentary heterogeneity on contaminant plume migration. Results show that small-scale sedimentary heterogeneity has a significant effect on contaminant transport in the studied aquifer. The uncertainty on the spatial facies distribution and intrafacies hydraulic conductivity distribution results in a significant uncertainty on the calculated concentration distribution. Comparison with standard variogram-based techniques shows that multiple-point geostatistics allow better reproduction of irregularly shaped low-permeability clay drapes that influence solute transport. 相似文献
13.
基于MODFLOW参数不确定性的地下水水流数值模拟方法 总被引：1，自引：0，他引：1
考虑到模型不确定性引起的地下水数值模拟不确定性对模拟过程的影响,在简要介绍含水层水文地质参数变异性研究进展和地质统计学的基础上,基于常用的确定性地下水流数值模拟软件MODFLOW开发了MODFLOW-Gslib软件,相较于传统的数值模拟方法,将地质统计学与数值模拟结合的方法能够模拟非均质含水层中的参数变异性问题。将MODFLOW-Gslib软件运用于模拟实例中,选择常见的不确定性因素进行模拟,并对其模拟产生的数据进行统计分析,结果表明,软件转化后的参数符合水文地质参数不确定性的相关特征;与原模拟结果进行对比,该软件能够更加真实地刻画含水层参数变异性特征。 相似文献
14.
地下水流数值模拟过程中,水文地质参数的不确定性对模拟结果影响很大。以内蒙古鄂尔多斯市某水源地为例,利用拉丁超立方抽样(LHS)方法获得了含水层渗透参数的随机组合,进行地下水流随机模拟。通过对观测资料与计算水位的绝对值平均(MAE)误差和误差均方根(RMSE)的统计分析,获得了模型较为稳定的随机模拟次数是243次。利用该随机模型对水源地设计开采量进行水位预测,并给出允许降深的风险性分布图。结果表明,预测水位和标准差分布符合实际情况,水位降深大于35 m的风险性最大达到75%。 相似文献
15.
A small-scale hydrogeological study was conducted in a fractured carbonate-rock aquifer located in a quarry to relate groundwater flow to the fracture network. The field study in the St-Eustache quarry, which integrates structural surveys, well logging and hydraulic tests, showed that the most important features that affect groundwater flow in the sedimentary aquifer are high hydraulic conductivity horizontal bedding planes. Vertical fractures are abundant in the quarry and throughout the region, but they have a minor effect on groundwater flow. To have a significant impact on the flow regime and lead to vertical groundwater flow, the permeability of all vertical joints need to be enhanced compared to what was generally observed at the site. Such an increase in permeability could potentially occur where dissolution and fracturing is more intense or at stress release locations such as near the surface in the quarry. 相似文献
16.
Wang Mingyu The University of Arizona Tucson Arizona USA Department of Water Resources Environmental Engineering China University of Geosciences Beijing Chen Jinsong Wan Li Department of Water Resources Environmental Engineering 《中国地质大学学报(英文版)》2001,12(3)
ＩＮＴＲＯＤＵＣＴＩＯＮＧｒｏｕｎｄｗａｔｅｒｏｒｆｌｕｉｄｆｌｏｗｍｏｄｅｌｉｎｇｉｎｆｒａｃｔｕｒｅｄｒｏｃｋｓｉｓａｃｏｍｐｌｉｃａｔｅｄｔｈｅｏｒｅｔｉｃａｌａｎｄａｐｐｌｉｅｄｔｏｐｉｃ.Ｂｏｔｈｔｈｅｏｒｅｔｉｃａｌｌｙａｎｄｏｐｅｒａｔｉｏｎａｌｌｙ ,ｉｔｉｓｉｍｐｏｒｔａｎｔｉｎｍａｎｙｆｉｅｌｄｓｓｕｃｈａｓｇｅｏｌｏｇｉｃａｌａｎｄｈｙｄｒｏｇｅｏｌｏｇｉｃａｌｅｎｇｉｎｅｅｒｉｎｇ ,ｅｎｖｉｒｏｎｍｅｎｔａｌｅｎｇｉｎｅｅｒｉｎｇａｎｄｐｅｔｒｏｌｅｕｍｅｎｇｉｎｅｅｒｉｎ… 相似文献
17.
Bart Rogiers Thomas Vienken Matej Gedeon Okke Batelaan Dirk Mallants Marijke Huysmans Alain Dassargues 《Environmental Earth Sciences》2014,72(5):1303-1324
Direct push (DP) technologies are typically used for cost-effective geotechnical characterization of unconsolidated soils and sediments. In more recent developments, DP technologies have been used for efficient hydraulic conductivity (K) characterization along vertical profiles with sampling resolutions of up to a few centimetres. Until date, however, only a limited number of studies document high-resolution in situ DP data for three-dimensional conceptual hydrogeological model development and groundwater flow model parameterization. This study demonstrates how DP technologies improve building of a conceptual hydrogeological model. We further evaluate the degree to which the DP-derived hydrogeological parameter K, measured across different spatial scales, improves performance of a regional groundwater flow model. The study area covers an area of ~60 km2 with two overlying, mainly unconsolidated sand aquifers separated by a 5–7 m thick highly heterogeneous clay layer (in north-eastern Belgium). The hydrostratigraphy was obtained from an analysis of cored boreholes and about 265 cone penetration tests (CPTs). The hydrogeological parameter K was derived from a combined analysis of core and CPT data and also from hydraulic direct push tests. A total of 50 three-dimensional realizations of K were generated using a non-stationary multivariate geostatistical approach. To preserve the measured K values in the stochastic realizations, the groundwater model K realizations were conditioned on the borehole and direct push data. Optimization was performed to select the best performing model parameterization out of the 50 realizations. This model outperformed a previously developed reference model with homogeneous K fields for all hydrogeological layers. Comparison of particle tracking simulations, based either on the optimal heterogeneous or reference homogeneous groundwater model flow fields, demonstrate the impact DP-derived subsurface heterogeneity in K can have on groundwater flow and solute transport. We demonstrated that DP technologies, especially when calibrated with site-specific data, provide high-resolution 3D subsurface data for building more reliable conceptual models and increasing groundwater flow model performance. 相似文献
18.
19.
Numerical modeling of the transient hydrogeological response produced by tunnel construction in fractured bedrocks 总被引：10，自引：0，他引：10
Groundwater inflows into tunnels constructed in fractured bedrocks not only constitute an important factor controlling the rate of advancement in driving the tunnel but may pose potential hazards. Drawdowns caused by tunnel construction may also induce geotechnical and environmental impacts. Here we present a numerical methodology for the dynamic simulation of the hydrogeological transient conditions induced by the tunnel front advance. The methodology is based on the use of a Cauchy boundary condition at the points lying along the tunnel according to which water discharge, Q, is computed as the product of a leakage coefficient, , and the head difference, (H−h), where H is the prescribed head at the tunnel wall and h is the hydraulic head in the fractured rock in the close vicinity of the tunnel. At a given position of the tunnel, is zero until the tunnel reaches such position when it is assigned a positive value. The use of step-wise time functions for allows an efficient and accurate simulation of the transient hydrogeological conditions at and around the tunnel during the excavation process. The methodology has been implemented in TRANMEF-3, a finite element computer code for groundwater flow in 3D fractured media developed at the University of A Coruña, Spain, and has been used to simulate the impact of a tunnel on the groundwater system at the Äspö island (Sweden). This tunnel was constructed to access an underground laboratory for research on radioactive waste disposal. The large amount of available data at this site provides a unique opportunity to test the performance of the numerical model and the proposed methodology for tunnel advance. With just minor calibration, the numerical model is able to reproduce accurately the measurements of inflows into the tunnel at several reaches and hydraulic heads at surface-drilled boreholes. These results obtained at the Äspö site lead us to conclude that accurate predictions of the transient hydrogeological responses induced by tunneling works in fractured bedrocks, can be achieved provided that a sound hydrogeological characterization of large-scale fracture zones is available. 相似文献
20.
Groundwater flow in fractured rocks is modeled using a coupled model based on the domain decomposition method. In the model, the fractured porous medium is divided into two non-overlapping sub-domains. One is the rock matrix, in which the medium is described using a continuum model. The other consists of deep fractures and fissure zones, where the medium is described using a discrete fracture network (DFN) model. The two models are coupled through the continuity of the hydraulic heads and fluxes on the common boundaries. The coupled model is used to simulate groundwater flow in a hydropower station. The results show that the model simulates groundwater levels that are in agreement with the measured groundwater levels. Furthermore, the model’s parameters relating to deep fractures and fissure zones are verified by comparing three different models (the continuum model, coupled model, and DFN model). The results show that the coupled model can capture and duplicate the hydrogeological conditions in the study domain, whereas the continuum model overestimates and the DFN model underestimates the measured hydraulic heads. A sensitivity analysis shows that fracture aperture has a considerable effect on the groundwater level. So, when the fracture aperture is large, the coupled model or DFN model is more appropriate than the continuum model in the fracture domain. 相似文献