共查询到20条相似文献，搜索用时 78 毫秒
1.
The paper addresses the problem of autonomous underwater vehicle (AUV) modelling and parameter estimation as a means to predict the dynamic performance of underwater vehicles and thus provide solid guidelines during their design phase. The use of analytical and semi-empirical (ASE) methods to estimate the hydrodynamic derivatives of a popular class of AUVs is discussed. A comparison is done with the results obtained by using computational fluid dynamics to evaluate the bare hull lift force distribution around a fully submerged body. An application is made to the estimation of the hydrodynamic derivatives of the MAYA AUV, an autonomous underwater vehicle developed under a joint Indian-Portuguese project. The estimates obtained were used to predict the turning diameter of the vehicle during sea trials. 相似文献
2.
针对水下机器人操纵性优化设计中水动力系数预报问题,在水下机器人水动力预报中引入艇体肥瘦指数概念,确定了水下机器人艇体几何描述的五参数模型。提出采用小波神经网络方法预报水下机器人水动力,确定了神经网络的结构,利用均匀试验设计方法,设计了神经网络的学习样本。研究结果表明,只要确定适当的输入参数,选择适当的学习样本和网络结构,利用小波神经网络方法对水下机器人水动力进行预报可以达到较好的精度。 相似文献
3.
Wang Ya-xing Liu Jin-fu Liu Tie-jun Jiang Zhi-bin Tang Yuan-gui Huang Cheng 《中国海洋工程》2019,33(5):573-582
Range is an important factor to the design of autonomous underwater vehicles(AUVs), while drag reduction efforts are pursued, the investigation of body-propeller interaction is another vital consideration. We present a numerical and experimental study of the hull-propeller interaction for deeply submerged underwater vehicles, using a proportionalintegral-derivative(PID) controller method to estimate self-propulsion point in CFD environment. The hydrodynamic performance of hull and propeller at the balance state when the AUV sails at a fixed depth is investigated, using steady RANS solver of Star-CCM+. The proposed steady RANS solver takes only hours to reach a reasonable solution. It is more time efficient than unsteady simulations which takes days or weeks, as well as huge consumption of computing resources. Explorer 1000, a long range AUV developed by Shenyang Institute of Automation, Chinese Academy of Sciences, was studied as an object, and self-propulsion point, thrust deduction,wake fraction and hull efficiency were analyzed by using the proposed RANS method. Behind-hull performance of the selected propeller MAU4-40, as well as the hull-propeller interaction, was obtained from the computed hydrodynamic forces. The numerical results are in good qualitative and quantitative agreement with the experimental results obtained in the Qiandao Lake of Zhejiang province, China. 相似文献
4.
Computational fluid dynamics, CFD, is becoming an essential tool in the prediction of the hydrodynamic efforts and flow characteristics of underwater vehicles for manoeuvring studies. However, when applied to the manoeuvrability of autonomous underwater vehicles, AUVs, most studies have focused on the determination of static coefficients without considering the effects of the vehicle control surface deflection. This paper analyses the hydrodynamic efforts generated on an AUV considering the combined effects of the control surface deflection and the angle of attack using CFD software based on the Reynolds-averaged Navier–Stokes formulations. The CFD simulations are also independently conducted for the AUV bare hull and control surface to better identify their individual and interference efforts and to validate the simulations by comparing the experimental results obtained in a towing tank. Several simulations of the bare hull case were conducted to select the k–ω SST turbulent model with the viscosity approach that best predicts its hydrodynamic efforts. Mesh sensitivity analyses were conducted for all simulations. For the flow around the control surfaces, the CFD results were analysed according to two different methodologies, standard and nonlinear. The nonlinear regression methodology provides better results than the standard methodology does for predicting the stall at the control surface. The flow simulations have shown that the occurrence of the control surface stall depends on a linear relationship between the angle of attack and the control surface deflection. This type of information can be used in designing the vehicle's autopilot system. 相似文献
5.
A control scheme named the variable-lateral-force cavitator, which is focused on the control of lift force, drag force and lateral forces for underwater supercavity vehicles was proposed, and the supercavitating flow around the cavitator was investigated numerically using the mixture multiphase flow model. It is verified that the forces of pitching, yawing, drag and lift, as well as the supercavity size of the underwater vehicle can be effectively regulated through the movements of the control element of the variable-lateral-force cavitator in the radial and circumferential directions. In addition, if the control element on either side protrudes to a height of 5% of the diameter of the front cavitator, an amount of forces of pitching and yawing equivalent to 30% of the drag force will be produced, and the supercavity section appears concave inwards simultaneously. It is also found that both the drag force and lift force of the variable-lateral-force cavitator decline as the angle of attack increases. 相似文献
6.
对水下滑翔器的整体外形设计与水动力性能进行研究。在Slocum等几种典型水下滑翔器样机的基础上,对滑翔器的主体和附体进行一体化设计,得到阻力最小的新型水下滑翔器构型设计。利用CFD方法对水下滑翔器进行模拟仿真,通过分析对比五种主体构型,得到了比较合理的主体线型,然后用正交设计方法和曲线拟合法对附体进行了优选工作,最后得到了性能更优的整体载体外形。模拟仿真实验表明,滑翔器在8°左右攻角航行时,具有最大的升阻比;和Slocum等经典样机相比,新的载体具有更好的水动力性能。通过上述研究工作,也可以缩短水下滑翔器研制周期,降低设计成本,并为水下滑翔器的更优设计提供了有力的技术指导和参考。 相似文献
7.
The main purpose of this study is to establish a better understanding of the relationship between drag reduction and surface roughness. Experiments were conducted to measure the force and flow characteristics of a circular cylinder with different types of artificial surface roughness over the range 6 × 103 < Re < 8 × 104 (Re is based on the cylinder diameter D). The roughness cylinder was formed by covering the exterior surface of the cylinder with uniformly distributed (1) sandpaper, (2) netting, and (3) dimples. The roughness coefficient ranged from k/D = 0.0028 to 0.025 (k is the roughness height). A detailed quantitative measurement of the flow field around the cylinder using Particle Imaging Velocimetry (PIV) was carried out. The hydrodynamic force coefficients (drag and lift) of the rough cylinders are compared against those of a smooth cylinder measured under the same flow conditions. It is found that certain configuration of surface roughness significantly reduces the mean drag coefficient of the cylinder, particularly at large Reynolds numbers. In addition, the root-mean-square (r.m.s.) lift coefficient of the rough cylinders is considerably lower than that of a smooth cylinder. 相似文献
8.
The propeller of an Autonomous Underwater Vehicle (AUV) operates at low Reynolds number in laminar to turbulent transition region. The performance of these propellers can be calculated accurately using RANSE solver with γ − Reθ transition model. In this study, the global and local hydrodynamic characteristics of open and ducted propeller are investigated using the γ − Reθ transition model. The capability of the γ − Reθ transition model to capture laminar to turbulent transition on the surface of the open propeller is demonstrated by comparison with published experimental results. The application of transition model for the propeller Ka-4-70 inside the duct 19A shows that the centrifugal forces are dominant at low Reynolds number and the flow is mainly directed in the radial direction. The transition model is able to predict complex flow physics such as leading-edge separation, tip leakage vortex, and the separation bubble on outer surface of the duct. The accurate prediction of these flow phenomenon can lead to correct calculation of global hydrodynamic forces and moments acting on the propeller at low Reynolds number. 相似文献
9.
The hydrodynamic forces on the stationary partially submerged cylinder are investigated through towing test with Reynolds number ranging from 5 × 104 to 9 × 105. Three test groups of partially submerged cylinders with submerged depths of 0.25 D, 0.50 D, and 0.75 D and one validation group of fully submerged cylinders are conducted. During the experiments, the hydrodynamic forces on the cylinders are measured using force sensors. The test results show a considerable difference in the hydrodynamic coefficients for the partially submerged cylinders versus the fully submerged cylinders. A significant mean downward lift force is first observed for the partially submerged cylinders in a steady flow. The maximum of the mean lift coefficients can reach 1.5. Two distinct features are observed due to the effects of overtopping: random distributions in the mean drag coefficients and a clear quadratic relationship between the mean lift coefficients and the Froude number appear in the non-overtopping region. However, the novel phenomenon of a good linear relationship with the Froude number for the mean hydrodynamic coefficients is clearly shown in the overtopping region. In addition, fluctuating hydrodynamic coefficients are further proposed and investigated. These results are helpful to have a better understanding of the problem and to improve related structural designs. 相似文献
10.
11.
In this paper, the hydrodynamic coefficients of a horizontal semi-immersed cylinder in steady current and oscillatory flow combining with constant current are obtained via forced oscillation experiments in a towing tank. Three non-dimensional parameters (Re, KC and Fr) are introduced to investigate their effects on the hydrodynamic coefficients. The experimental results show that overtopping is evident and dominates when the Reynolds number exceeds 5×105 in the experiment. Under steady current condition, overtopping increases the drag coefficient significantly at high Reynolds numbers. Under oscillatory flow with constant current condition, the added mass coefficient can even reach a maximum value about 3.5 due to overtopping while the influence of overtopping on the drag coefficient is minor. 相似文献
12.
The multiple autonomous underwater vehicles (AUV) sailing in a specific configuration can reduce resistance if properly using the hydrodynamic interactions. This paper investigated the resistance characteristics of a multi-AUV system with both experimental and numerical approaches. A center-beam-support bar structure was designed to conduct the experiment. Validation of our numerical method was carried out by comparing with the experimental data. Parametric studies were then performed on the distance, the speed and the number of AUVs. The numerical results showed that SST-transition model is more suitable for simulating the multi-AUV system at Reynolds numbers (Re) ranging from 2.46 × 106 to 6.69 × 106. At Re = 6.14 × 106, the largest reduction of resistance can be 35.14% at d/L = 0. In the meantime, there appears some undesirable interference area between d/L = 0.042 and d/L = 0.063 where the total resistance of the fleet increases sharply. Apart from that, higher reduction of resistance can be expected with the increase of the speed and the number of AUVs. 相似文献
13.
The hydrodynamic interaction between an Autonomous Underwater Vehicle (AUV) manoeuvring in close proximity to a larger underwater vehicle can cause rapid changes in the motion of the AUV. This interaction can lead to mission failure and possible vehicle collision. Being self-piloted and comparatively small, an AUV is more susceptible to these interaction effects than the larger body. In an aim to predict the manoeuvring performance of an AUV under the effects of the interaction, the Australian Maritime College (AMC) has conducted a series of computer simulations and captive model experiments. A numerical model was developed to simulate pure sway motion of an AUV at different lateral and longitudinal positions relative to a larger underwater vehicle using Computational Fluid Dynamics (CFDs). The variables investigated include the surge force, sway force and the yaw moment coefficients acting on the AUV due to interaction effects, which were in turn validated against experimental results. A simplified method is presented to obtain the hydrodynamic coefficients of an AUV when operating close to a larger underwater body by transforming the single body hydrodynamic coefficients of the AUV using the steady-state interaction forces. This method is considerably less time consuming than traditional methods. Furthermore, the inverse of this method (i.e. to obtain the steady state interaction force) is also presented to obtain the steady-state interaction force at multiple lateral separations efficiently. Both the CFD model and the simplified methods have been validated against the experimental data and are capable of providing adequate interaction predictions. Such methods are critical for accurate prediction of vehicle performance under varying conditions present in real life. 相似文献
14.
Toshihiro Maki Ayaka KumeTamaki Ura 《Deep Sea Research Part I: Oceanographic Research Papers》2011,58(7):757-767
We developed and tested a comprehensive method for measuring the three-dimensional distribution of tubeworm colonies using an autonomous underwater vehicle (AUV). We derived volumetric measurements such as the volume, area, average height, and number of tubes for colonies of Lamellibrachia satsuma, the world's shallowest-dwelling vestimentiferan tubeworm discovered at a depth of 82 m, at the Haorimushi site in Kagoshima Bay, Japan, by processing geometric and visual data obtained through low-altitude surveys using the AUV Tri-Dog 1. According to the results, the tubeworm colonies cover an area of 151.9 m2, accounting for 5.8% of the observed area (2600 m2). The total number of tubes was estimated to be 99,500. Morphological parameters such as area, volume, and average height were estimated for each colony. On the basis of average height, colonies could be clearly separated into two groups, short (0.1-0.3 m) and tall (0.6-0.7 m), independent of the area. 相似文献
15.
A discrete time-delay control (DTDC) law for a general six degrees of freedom unsymmetric autonomous underwater vehicle (AUV) is presented. Hydrodynamic parameters like added mass coefficients and drag coefficients, which are generally uncertain, are not required by the controller. This control law cancels the uncertainties in the AUV dynamics by direct estimation of the uncertainties using time-delay estimation technique. The discrete-time version of the time-delay control does not require the derivative of the system state to be measured or estimated, which is required by the continuous-time version of the controller. This particularly provides an advantage over continuous-time controller in terms of computational effort or availability of sensors for measuring state derivatives, i.e., linear and angular accelerations. Implementation issues for practical realization of the controller are discussed. Experiments on a test-bed AUV were conducted in depth, pitch, and yaw degrees of freedom. Results show that the proposed control law performs well in the presence of uncertainties. 相似文献
16.
Traditionally autonomous underwater vehicles (AUVs) have been built with a torpedo-like shape. This common shaping is hydrodynamically suboptimal for those AUVs required to operate at snorkeling condition near the free surface. In this case, the wave resistance associated to the wavy deformation of the sea surface induced by the motion of the platform is an important component of the drag. This work has investigated the optimum hull shape of an underwater vehicle moving near the free surface. Specifically a first-order Rankine panel method has been implemented to compute the wave resistance on a body of revolution moving close to the free surface. A simulated annealing algorithm was then employed to search those set of parameters defining the hull shape that minimize the wave resistance. The optimization was constrained to keep constant the total volume of the vehicle. The total drag of scaled models of the torpedo-like and resulting optimum shapes was measured in the naval tank of the University of Trieste. Measurements showed a smaller resistance of the optimized shape in the range of the considered Froude numbers. 相似文献
17.
《Oceanic Engineering, IEEE Journal of》2008,33(2):59-68
18.
A tower hinged at the bottom was oscillated mechanically in a sinusoidal fashion in a plane in still water. An instrumented section in the tower measured the inline and transverse forces locally on the tower due to the hydrodynamic effects. These forces are analyzed for the added mass, drag and lift coefficients which are presented as functions of Keulegan-Carpenter and Reynolds number. The lift force frequencies are also investigated. The measured overall reactions on the tower are used to verify the values of the local coefficients. The results presented here are not only applicable to articulated towers but to other moving elements of an offshore structure, e.g. risers, tension-legs, etc. 相似文献
19.
N. Vedachalam R. Ramesh V. Bala Naga Jyothi V. Doss Prakash G. A. Ramadass 《Marine Georesources & Geotechnology》2013,31(5):525-538
ABSTRACTReliable power supply, precise position determination and effective communication are the key requirements for strategic autonomous underwater vehicles (AUV) involved in long duration scientific missions, search operations and when operated as a swarm. The paper presents the challenging range of AUV developed for deep water, Polar and intervention applications; demanding technical requirements for strategic AUV; reliability modeling done on the lithium-ion batteries to identify the redundancy requirements for achieving near-zero failures; navigation model to estimate the achievable level of position accuracies using the state-of-the-art navigation system; limitations in underwater communication; and their importance in realizing vehicle autonomy and swarm intelligence. It is identified that a strategic grade Doppler velocity- aided inertial navigation system could provide position accuracies of about 0.5% of the distance travelled when navigated using sea bottom or ice reference, and a 38?kWh lithium-ion battery pack requires about 7% redundant battery capacity to achieve a failure probability of <?1% in a period of 1 year. 相似文献
20.
Hydrodynamic forces exerting on a pipeline partially buried in a permeable seabed subjected to combined oscillatory flow and steady current are investigated numerically. Two-dimensional Reynolds-Averaged Navier-Stokes equations with a k−ω turbulent model closure are solved to simulate the flow around the pipeline. The Laplace equation is solved to calculate the pore pressure below the seabed with the simulated seabed hydrodynamic pressure as boundary conditions. The numerical model is validated against the experimental data of a fully exposed pipeline resting on a plane boundary under various flow conditions. Then the flow with different embedment depths, steady current ratios and KC numbers is simulated. The amplitude of seepage velocity is much smaller than the amplitude of free stream velocity as expected. The normalized Morison inertia, drag and lift coefficients based on the corresponding force coefficients of a fully exposed pipeline are investigated. The normalized Morison force coefficients reduce almost linearly with the increase of embedment depth and that the KC only has minor effect on the normalized Morison coefficients. It is also found that the permeable seabed condition causes a slight increase on the inline force and has a little effect on the lift force, compared with corresponding conditions in an impermeable bed. 相似文献