共查询到20条相似文献，搜索用时 375 毫秒
1.
A hydrodynamic model of a two-part underwater manoeuvrable towed system is proposed in which a depressor is equipped with active horizontal and vertical control surfaces, and a towed vehicle is attached to the lower end of a primary cable. In such a system the towed vehicle can be manoeuvred in both vertical and horizontal planes when it is towed at a certain velocity and the coupling effect of excitations at the upper end of the primary cable and disturbances of control manipulations to the towed vehicle can be reduced. In the model the hydrodynamic behavior of an underwater vehicle is described by the six-degrees-of-freedom equations of motion for submarine simulations. The added masses of an underwater vehicle are obtained from the three-dimensional potential theory. The control surface forces of the vehicle are determined by the wing theory. The results indicate that with relative simple control measures a two-part underwater manoeuvrable towed system enables the towed vehicle to travel in a wide range with a stable attitude. The method in this model gives an effective numerical approach for determining hydrodynamic characteristics of an underwater vehicle especially when little or no experimental data are available or when costs prohibit doing experiments for determining these data. 相似文献
2.
On the motions of the underwater remotely operated vehicle with the umbilical cable effect 总被引：1，自引：0，他引：1
In this paper, a hydrodynamic model is developed to simulate the six degrees of freedom motions of the underwater remotely operated vehicle (ROV) including the umbilical cable effect. The corresponding hydrodynamic forces on the underwater vehicle are obtained by the planar motion mechanism test technique. With the relevant hydrodynamic coefficients, the 4th-order Runge–Kutta numerical method is then adopted to solve the equations of motions of the ROV and the configuration of the umbilical cable. The multi-step shooting method is also suggested to solve the two-end boundary-value problem on the umbilical cable with respect to a set of first-order ordinary differential equation system. All operation simulations for the ROV including forward moving, ascending, descending, sideward moving and turning motions can be analyzed, either with or without umbilical cable effect. The current effect is also taken into consideration. The present results reveal that the umbilical cable indeed significantly affects the motion of the ROV and should not be neglected in the simulation. 相似文献
3.
The hydrodynamic interaction between an Autonomous Underwater Vehicle (AUV) manoeuvring in close proximity to a larger underwater vehicle can cause rapid changes in the motion of the AUV. This interaction can lead to mission failure and possible vehicle collision. Being self-piloted and comparatively small, an AUV is more susceptible to these interaction effects than the larger body. In an aim to predict the manoeuvring performance of an AUV under the effects of the interaction, the Australian Maritime College (AMC) has conducted a series of computer simulations and captive model experiments. A numerical model was developed to simulate pure sway motion of an AUV at different lateral and longitudinal positions relative to a larger underwater vehicle using Computational Fluid Dynamics (CFDs). The variables investigated include the surge force, sway force and the yaw moment coefficients acting on the AUV due to interaction effects, which were in turn validated against experimental results. A simplified method is presented to obtain the hydrodynamic coefficients of an AUV when operating close to a larger underwater body by transforming the single body hydrodynamic coefficients of the AUV using the steady-state interaction forces. This method is considerably less time consuming than traditional methods. Furthermore, the inverse of this method (i.e. to obtain the steady state interaction force) is also presented to obtain the steady-state interaction force at multiple lateral separations efficiently. Both the CFD model and the simplified methods have been validated against the experimental data and are capable of providing adequate interaction predictions. Such methods are critical for accurate prediction of vehicle performance under varying conditions present in real life. 相似文献
4.
In this study, a dynamic modeling method for foil-like underwater vehicles is introduced and experimentally verified in different sea tests of the Hadal ARV. The dumping force of a foil-like underwater vehicle is sensitive to swing motion. Some foil-like underwater vehicles swing periodically when performing a free-fall dive task in experiments. Models using conventional modeling methods yield solutions with asymptotic stability, which cannot simulate the self-sustained swing motion. By improving the ridge regression optimization algorithm, a grey-box modeling method based on 378 viscous drag coefficients using the Taylor series expansion is proposed in this study. The method is optimized for over-fitting and convergence problems caused by large parameter matrices. Instead of the PMM test data, the unsteady computational fluid dynamics calculation results are used in modeling. The obtained model can better simulate the swing motion of the underwater vehicle. Simulation and experimental results show a good consistency in free-fall tests during sea trials, as well as a prediction of the dive speed in the swing state. 相似文献
5.
Wang Ya-xing Liu Jin-fu Liu Tie-jun Jiang Zhi-bin Tang Yuan-gui Huang Cheng 《中国海洋工程》2019,33(5):573-582
Range is an important factor to the design of autonomous underwater vehicles(AUVs), while drag reduction efforts are pursued, the investigation of body-propeller interaction is another vital consideration. We present a numerical and experimental study of the hull-propeller interaction for deeply submerged underwater vehicles, using a proportionalintegral-derivative(PID) controller method to estimate self-propulsion point in CFD environment. The hydrodynamic performance of hull and propeller at the balance state when the AUV sails at a fixed depth is investigated, using steady RANS solver of Star-CCM+. The proposed steady RANS solver takes only hours to reach a reasonable solution. It is more time efficient than unsteady simulations which takes days or weeks, as well as huge consumption of computing resources. Explorer 1000, a long range AUV developed by Shenyang Institute of Automation, Chinese Academy of Sciences, was studied as an object, and self-propulsion point, thrust deduction,wake fraction and hull efficiency were analyzed by using the proposed RANS method. Behind-hull performance of the selected propeller MAU4-40, as well as the hull-propeller interaction, was obtained from the computed hydrodynamic forces. The numerical results are in good qualitative and quantitative agreement with the experimental results obtained in the Qiandao Lake of Zhejiang province, China. 相似文献
6.
Model-based feedback control of autonomous underwater gliders 总被引：6，自引：0，他引：6
We describe the development of feedback control for autonomous underwater gliders. Feedback is introduced to make the glider motion robust to disturbances and uncertainty. Our focus is on buoyancy-propelled, fixed-wing gliders with attitude controlled by means of active internal mass redistribution. We derive a nonlinear dynamic model of a nominal glider complete with hydrodynamic forces and coupling between the vehicle and the movable internal mass. We use this model to study stability and controllability of glide paths and to derive feedback control laws. For our analysis, we restrict to motion in the vertical plane and consider linear control laws. For illustration, we apply our methodology to a model of our own laboratory-scale underwater glider 相似文献
7.
Wave effects on ascending and descending motions of the autonomous underwater vehicle 总被引：1，自引：0，他引：1
In the paper, a hydrodynamic model including the characteristics of maneuvering and seakeeping is developed to simulate the six-degree of freedom motions of the underwater vehicle steering near the sea surface. The corresponding wave exciting forces on the underwater vehicle moving in waves are calculated by the strip theory, which is based on the source distribution method. With the hydrodynamic coefficients relevant to the maneuvering and seakeeping, the fourth-order Runge–Kutta numerical method is adopted to solve the equations of motions and six-degrees of freedom of the motions for the underwater vehicle steering near the free surface can be obtained. The wave effect on the corresponding motions of the underwater vehicle is investigated and some interesting phenomena with respect to different wave frequencies and headings are observed. The hydrodynamic numerical model developed here can be served as a valuable tool for analyzing the ascending and descending behaviors of the underwater vehicle near the sea surface. 相似文献
8.
An experimental set-up is developed and proved to be effective for laboratory study of an underwater towed system. The experimental technique gives a practical method for monitoring the kinematic and dynamic performance of an underwater towed system in a ship towing tank. Both the theoretical and experimental results in the investigation indicate that the hydrodynamic response of a towed vehicle to the wave induced motion of a towing ship can be significantly reduced by applying a two-part tow method. A comparison of the numerical and experimental results in the investigation demonstrates that the numerical simulation results are close to the experimental data, overall agreement between experimental and theoretical results is satisfactory. The results qualitatively verify the mathematical model of a two-part underwater towed system proposed by Wu and Chwang [Wu, J., Chwang, A.T., 2000. A hydrodynamic model of a two-part underwater towed system. Ocean Engineering 27 (5), 455–472]. 相似文献
9.
《Oceanic Engineering, IEEE Journal of》2006,31(2):432-453
Precise control of trawl systems is assumed to be beneficial from both economic and environmental reasons. Using the trawl doors as actuators could increase the amount of available control forces. Adequate mathematical models of the hydrodynamic fores on the trawl doors are needed for control system design and verification. This paper presents a method for mathematical modeling of the hydrodynamic forces on the trawl doors. These forces are divided into steady-state forces and transient effects. The six degrees of freedom (six dof) steady-state hydrodynamic coefficients of a trawl door have been found as a function of its angles of attack and slip, based on wind-tunnel experiments. The coefficients are parameterized for smoothing and computational performance, and methods for extending the validity of the model in terms of orientation and trawl door shape are presented. The transient effects are described as functions of relative accelerations between the trawl door and the ambient water, angular velocities of the trawl door and circulation buildup. These effects are manifestations of variations in the flow around the trawl door and its wake, and a numerical method based on potential theory is employed to investigate them. A computational efficient, nonlinear, state–space model of the hydrodynamic forces is finally proposed. It accounts for steady-state and unsteady hydrodynamic forces and moments in six dof, suitable for trawl control system design and analysis. 相似文献
10.
This work describes a simple and robust engineering approach for the real-time sensing and monitoring of unsteady hydrodynamic loads and moments. Innovative flow diagnostics techniques are used to extract critical flow phenomena such as the state of the boundary layer (laminar, transitional, or turbulent), leading-edge stagnation point (or attachment line), flow separation and reattachment, and vortex pattern and their dynamic characteristics from surface hot-film signatures obtained with multielement, micron-thin surface hot-film sensors operated by a bank of constant voltage anemometers. Unsteady hydrodynamic loads and moments are then obtained as a function of the instantaneous locations of the critical surface signatures. Test results from a few recent experiments are described. The heuristics approach presented here will be useful for the development of closed-loop active control system for advanced autonomous underwater vehicle designs with biologically inspired smart actuators. 相似文献
11.
O. SaoutP. Ananthakrishnan 《Applied Ocean Research》2011,33(2):158-167
A theoretical methodology to determine the open-loop directional stability of a near-surface underwater vehicle is presented. It involves a solution of coupled sway and yaw equations of motion in a manner similar to that carried out for surface ships. The stability derivatives are obtained numerically through simulation of motions corresponding to planar motion mechanism (PMM) model tests. For the numerical simulation, a boundary-integral method based on the mixed Lagrangian-Eulerian formulation is developed. The free-surface effect on the vehicle stability is determined by comparing the results with that obtained for vehicle motion in infinite fluid. The methodology was used to determine the stability of the Florida Atlantic University’s Ocean EXplorer (OEX) AUV. The presence of the free surface, through radiation damping, is found to suppress unsteady oscillations and thereby enhance the directional stability of the vehicle. With effects of free surface, forward speed, location and geometry of rudders, location of the center of gravity etc. all being significant factors affecting stability, a general conclusion cannot be drawn on their combined effect on the vehicle stability. The present computational methodology is therefore a useful tool to determine an underwater vehicle’s stability for a given configuration and thus the viability of an intended mission a priori. 相似文献
12.
A three-dimensional model of a two-part underwater towed system is studied. In the model, the governing equations of cables are established based on the Ablow and Schechter method. The boundary conditions for the two-part underwater towed system are derived. The six-degrees-of-freedom equations of motion for submarine simulations are adopted to predict the hydrodynamic performance of a towed vehicle. The established governing equations for the system are then solved using a central finite difference method. In this paper several algorithms are used to solve this special form of finite difference equations. The results in this paper indicate that the two-part underwater towed system improves the dynamic behavior of the towed vehicle and is an easy way to decouple the towing ship motion from the towed vehicle. Because the model uses an implicit time integration, it is stable for large time steps and is an effective algorithm for simulation of a large-scale underwater towed system. 相似文献
13.
波浪滑翔机直接利用波浪能实现大范围长距离的机动运动观测,在海洋环境观测中可以发挥重要的作用。本文对波浪滑翔机推进装置在启动阶段的翼片的水动力学行为进行了研究。以波浪滑翔机水下推进装置的翼片为研究对象,运用雷诺平均Navier-Stokes方程(RANS),对给定垂荡和摆动运动的翼片水动力学进行了水动力分析和仿真,模拟了单个翼片、纵向阵列多翼片的运动状况,得到推进装置翼片附近的压力分布和整体推进动力,分析翼片间距变化在启动阶段对推进力的影响作用。通过该研究工作为深入理解波浪滑翔机推进装置工作状态提供了理论依据。 相似文献
14.
A method to compute wave- and current-induced viscous drift forces and moments on floating platforms in regular and random waves is presented. The relative velocity drag term of Morison's equation is used in conjunction with frequency domain first-order motion transfer functions to compute the drift forces and moments. Mean viscous drift forces and moments in regular waves in all six degrees-of-freedom of a tension leg platform are computed. The relative importance of the free-surface force integration, steady current, wave-current interaction and platform motions on the computed drift forces and moments are discussed. The results from this method, in the frequency domain, are used to compute the drift forces and responses in irregular waves using existing methods developed for potential drift computations. Comparisons with results from time-domain computations are also presented and good agreement between the frequency-domain and time-domain results is found. Some comparisons with experimental data are also made. The frequency-domain method is found to be an efficient and useful tool for the analysis of semi-submersible and tension leg platforms during the preliminary design stage in which extensive parametric studies need to be undertaken. 相似文献
15.
Biologically inspired maneuvering of autonomous undersea vehicles (AUVs) in the dive plane using pectoral-like oscillating fins is considered. Computational fluid dynamics are used to parameterize the forces generated by a mechanical flapping foil, which attempts to mimic the pectoral fin of a fish. Since the oscillating fins produce periodic force and moment of a variety of wave shapes, the essential characteristics of these signals are captured in their Fourier expansions. Maneuvering of the biorobotic AUV in the dive plane is accomplished by periodically altering the bias angle of the oscillating fin. Based on a discrete-time AUV model, an inverse control system for the dive-plane control is derived. It is shown that, in the closed-loop system, the inverse control system accomplishes accurate tracking of the prescribed time-varying depth trajectories and the segments of the intersample depth trajectory remain close to the discrete-time reference trajectory. The results show that the fins located away from the center of mass toward the nose of the vehicle provide better maneuverability. 相似文献
16.
Research was conducted to study the hydrodynamic efficiency of a foil with aft-swept wing tips. A potential flow based time domain panel method was formulated to predict the performance of a lunate and rectangular foil in large amplitude, unsteady motion. Skin drag was approximated and boundary layer growth and separation were also estimated. Hydrodynamic efficiency was evaluated in terms of propulsive efficiency and thrust coefficient of the foil. Results are presented for a lunate shaped planform and for a rectangular foil. Predictions show that the lunate shaped planform has a substantially higher propulsive efficiency (13% higher) than the rectangular foil under heavy load conditions when the feathering parameter is zero, throughout a range of reduced frequencies (0.2 to 1.8). Under a medium load condition, however, the rectangular foil gave a higher propulsive efficiency at reduced frequencies less than 0.5 and the same efficiency value at a reduced frequency of 1.8. For a practical range of reduced frequencies between 0.5 and 1.0, the lunate tail gave higher propulsive efficiency. The lunate planform gave a lower thrust coefficient at a heavy load and higher thrust at a medium load condition than the rectangular planform for all reduced frequencies. 相似文献
17.
This paper describes the estimation of hydrodynamic coefficients and the control algorithm based on a nonlinear mathematical modeling for a test bed autonomous underwater vehicle (AUV) named by SNUUV I (Seoul National University Underwater Vehicle I).A six degree of freedom mathematical model for SNUUV I is derived with linear and nonlinear hydrodynamic coefficients, which are estimated with the help of a potential code and also the system identification using multi-variable regression.A navigation algorithm is developed using three ranging sonars, pressure sensor and two inclinometers keeping towing tank applications in mind. Based on the mathematical model, a simulation program using a model-based control algorithm is designed for heading control and wall following control of SNUUV I.It is demonstrated numerically that the navigation system together with controller guides the vehicle to follow the desired heading and path with a sufficient accuracy. Therefore the model-based control algorithm can be designed efficiently using the system identification method based on vehicle motion experiments with the appropriate navigation system. 相似文献
18.
The propulsive characteristics of auto-pitch wing-in-ground effect oscillating foil propulsors (APWIGs) were numerically investigated through an unsteady Reynolds Averaged Navier-Stokes solver. The kinematics of such a biplane configuration is characterized by the prescribed heave motion and flow-induced pitch motion restrained by a torsional spring for each foil. Based on the validated numerical model, the comparison of propulsive performance between APWIGs and single auto-pitch oscillating foil, as well as dual-foil heave-only configuration, was conducted at different advance speeds. Results show that APWIGs is advantageous in both thrust production and efficiency enhancement over other two configurations due to the resulting wing-in-ground effect and substantial reduction of flow separation by the flow-regulated pitch motion. Furthermore, the effect of torsional spring stiffness on the propulsion of APWIGs was studied under different loaded conditions. It was found that both the maximum pitching angle and phase difference of pitch with heave are dramatically affected by the spring stiffness, which has major contribution to the hydrodynamic behaviours of the foils. Under a certain operating speed, an optimal torsional spring stiffness that produces the best propulsive performance can be found. With respect to the parametric space in the current study, the APWIGs can achieve a constant high efficiency over 70% by employing an appropriate spring stiffness. 相似文献
19.
20.
Energy-optimal trajectories for underwater vehicles be computed using a numerical solution of the optimal control problem. A performance index consisting of a weighted combination of energy and time consumption is proposed. Collision avoidance is solved by including path constraints. Control vector parameterization with direct single shooting is used in this study. The vehicle is modeled with six-dimensional nonlinear and coupled equations of motion. Optimal trajectories are computed for a vehicle controlled in all six degrees of freedom by dc-motor-driven thrusters. Good numerical results are achieved 相似文献