共查询到18条相似文献，搜索用时 140 毫秒
1.
植被生物量高光谱遥感监测研究进展 总被引：2，自引：0，他引：2
植被生物量的评估对于研究全球碳循环具有重大意义,而高光谱遥感技术为精确反演地表属性提供了重要的数据支持。针对如何更好地应用高光谱遥感技术进行植被生物量精确反演的问题,该文详细阐述了国内外应用高光谱技术估测植被生物量的研究进展。对反演植被生物量所涉及的数据源、反演模型的构建方法及其模型特点、反演模型应用对象等内容进行了综合评述,并通过分析认为,高光谱遥感技术较传统的多光谱遥感技术在生物量反演精度上有了显著的提高。同时,对建模方法、多源遥感数据融合以及模型通用性等方面的研究进行了展望,以达到在大尺度范围内对植被生物量进行准确反演的目的。 相似文献
2.
集成Landsat OLI和机载LiDAR条带数据的亚热带森林生物量制图 总被引：1，自引：0，他引：1
以亚热带天然次生林为研究对象,借助一个条带的少量LiDAR点云数据和覆盖整个研究区的免费Landsat OLI多光谱数据,并结合地面实测数据,探索森林生物量低成本高精度制图方法。首先,提取了OLI和LiDAR特征变量,并与地上和地下生物量进行相关分析以筛选变量;然后,借助LiDAR数据覆盖区的样地和条带LiDAR数据构建"LiDAR生物量模型";再从LiDAR反演生物量的结果中进行采样,结合OLI特征变量构建"LiDAR-OLI模型";最后,与单独使用OLI多光谱数据建立的"OLI估算模型"结果进行比较,分析精度并验证新方法的效果。结果表明,"LiDAR-OLI模型"对地上和地下生物量的模型拟合效果较好且均优于"OLI模型",且其交叉验证的精度也较高并优于"OLI模型",从而证明了新方法的可靠性及有效性。本研究为主、被动遥感技术在中小尺度上协同反演森林参数提供了实验基础,也为基于全覆盖免费OLI多光谱数据及条带LiDAR数据的低成本森林生物量制图探索了技术路线。 相似文献
3.
魏雪梅 《武汉大学学报(信息科学版)》2019,44(9):1385-1390
以Landsat8 OLI（operational land imager）为遥感数据源，森林资源二类调查和地理国情数据为主要辅助数据，对森林地上生物量（aboveground biomass，AGB）进行了反演和估算。以安徽省金寨县的天然林为研究对象，通过计算覆盖研究区Landsat8 OLI的光谱、纹理和地形特征，利用森林资源二类调查、地理国情普查与监测和外业调查数据建立AGB定量反演模型，以此为基础分析了不同特征对于AGB估算的影响。结果表明，基于所采用的方法得到的金寨县的森林地上生物量，最优反演模型的实测值与估算值相对误差为0.708 718，均方根误差为1.318 983，精度较高。依据该模型计算得到金寨县的生物总量为4 723 728 530 t，结果与实际情况符合。该研究对AGB定量反演和研究所采用的方法对于大范围监测森林资源具有可用性。 相似文献
4.
遥感技术估算森林生物量的研究进展 总被引：5，自引：0，他引：5
从单传感器和多传感器遥感数据集成两个方面介绍和阐述了遥感技术估算森林生物量的发展现状,以此提炼遥感技术估算森林生物量研究面临的问题。 相似文献
5.
6.
基于遥感的区域尺度森林地上生物量估算研究 总被引：1，自引：0，他引：1
森林是陆地生态系统最大的碳库,精确估算森林生物量是陆地碳循环研究的关键。首先从机载LiDAR数据中提取高度和密度统计量,采用逐步回归模型进行典型样区生物量估算;然后利用机载LiDAR数据估算的生物量作为样本数据,与多光谱遥感数据Landsat8 OLI的波段反射率及植被指数建立回归模型,实现区域尺度森林地上生物量估算。实验结果显示,机载LiDAR数据估算的鼎湖山样区生物量与地面实测生物量的相关性R2达0.81,生物量RMSE为40.85 t/ha,说明机载LiDAR点云数据的高度和密度统计量与生物量存在较高的相关性。以机载LiDAR数据估算的生物量为样本数据,结合多光谱遥感数据Landsat8 OLI估算粤西北地区的森林地上生物量,精度验证结果为:R2为0.58,RMSE为36.9 t/ha;针叶林、阔叶林和针阔叶混交林等3种不同森林类型生物量的估算结果为:R2分别为0.51(n=251)、0.58(n=235)和0.56(n=241),生物量RMSE分别为24.1 t/ha、31.3 t/ha和29.9 t/ha,估算精度相差不大。总体上看,利用遥感数据可以开展区域尺度的森林地上生物量估算,为森林固碳监测提供有力的参考数据。 相似文献
7.
8.
针对以往植被地上生物量(以下简称“生物量”)多尺度估算方法在数据收集、尺度转化、结果呈现等方面的局限,该文提出了面向植被均质单元的生物量多尺度估算方法：(1)定义了具有实际景观意义的植被均质单元,作为植被生物量估算的基本单元;(2)基于多源数据提取直接反映和间接影响植被生物量的多源因子,利用多尺度分割技术构建多尺度下的植被均质单元;(3)通过随机森林回归模型实现植被生物量多尺度估算。结果表明,该方法可避免多尺度下的数据获取,仅基于一套数据实现了研究区植被生物量多尺度估算,产生了较好的建模和估算精度。该方法不仅可量化生物量大小,还可描绘生物量均质区域,具有尺度变换便捷、灵活等优势。 相似文献
9.
估算森林地上生物量(AGB)对于全球实现碳中和目标至关重要。本文以美国缅因州Howland森林为研究区域,借助地面实测样地数据,对比分析协同不同数据源(高光谱和LiDAR)和机器学习算法(随机森林、支持向量机、梯度提升决策树和K最邻近回归)的研究,以改善Howland森林的生物量估计精度。结果表明,采用LiDAR和高光谱植被指数变量模型的最佳精度分别为0.874和0.868,协同高光谱和LiDAR变量并采用梯度提升决策树回归模型的精度为0.927,即多源遥感数据要优于单一数据源。高光谱和LiDAR数据的协同使用对于提高类似于Howland地区或更广泛区域的生物量估计的准确性,具有普遍的适用性与一定的应用前景。 相似文献
10.
机器学习算法在森林地上生物量估算中的应用 总被引：1，自引：0，他引：1
森林地上生物量是森林生产力的重要评价指标,对其进行高效监测对维持全球碳平衡和保护生态系统具有重要意义。本文首先基于冠层高度模型数据,通过分水岭分割算法得到单木冠幅边界;然后在单木冠幅范围内提取23个LiDAR变量,结合佩诺布斯科特试验森林的87组实测数据,利用随机森林和支持向量机建立森林地上生物量估算模型;最后对样地模型估算的结果进行了比较,讨论了预测结果及其精度。结果表明:本文选用的随机森林模型和支持向量机模型在估算森林地上生物量的应用中获得了较高的精度;并且,随机森林模型在基于机载雷达数据估测森林地上生物量中的估算精度更高,模型泛化能力更强,制图精度也更好,具有更好的适用性。 相似文献
11.
吉林长白山森林冠顶高度激光雷达与MERSI联合反演 总被引：1，自引：0，他引：1
将激光雷达与光学遥感相结合进行区域林分冠顶高度联合反演,提出了大脚印激光雷达GLAS脚点波形数据处理和不同地形条件下的森林冠顶高度反演算法,并建立了区域尺度不同森林类型林分冠顶高度GLAS＋MERSI联合反演模型,制作了长白山地区森林冠顶高度图。 相似文献
12.
A survey of remote sensing-based aboveground biomass estimation methods in forest ecosystems 总被引：7，自引：0，他引：7
Dengsheng Lu Qi Chen Guangxing Wang Lijuan Liu Guiying Li Emilio Moran 《International Journal of Digital Earth》2016,9(1):63-105
Remote sensing-based methods of aboveground biomass (AGB) estimation in forest ecosystems have gained increased attention, and substantial research has been conducted in the past three decades. This paper provides a survey of current biomass estimation methods using remote sensing data and discusses four critical issues – collection of field-based biomass reference data, extraction and selection of suitable variables from remote sensing data, identification of proper algorithms to develop biomass estimation models, and uncertainty analysis to refine the estimation procedure. Additionally, we discuss the impacts of scales on biomass estimation performance and describe a general biomass estimation procedure. Although optical sensor and radar data have been primary sources for AGB estimation, data saturation is an important factor resulting in estimation uncertainty. LIght Detection and Ranging (lidar) can remove data saturation, but limited availability of lidar data prevents its extensive application. This literature survey has indicated the limitations of using single-sensor data for biomass estimation and the importance of integrating multi-sensor/scale remote sensing data to produce accurate estimates over large areas. More research is needed to extract a vertical vegetation structure (e.g. canopy height) from interferometry synthetic aperture radar (InSAR) or optical stereo images to incorporate it into horizontal structures (e.g. canopy cover) in biomass estimation modeling. 相似文献
13.
结合机载、星载激光雷达对GLAS(地球科学激光测高系统)光斑范围内的森林地上生物量进行估测,并利用MODIS植被产品以及MERIS土地覆盖产品进行了云南省森林地上生物量的连续制图。机载LiDAR扫描的260个训练样本用于构建星载GLAS的森林地上生物量估测模型,模型的决定系数(R2)为0.52,均方根误差(RMSE)为31Mg/ha。研究结果显示,云南省总森林地上生物量为12.72亿t,平均森林地上生物量为94Mg/ha。估测的森林地上生物量空间分布情况与实际情况相符,森林地上生物量总量与基于森林资源清查数据的估测结果相符,表明了利用机载LiDAR与星载ICESatGLAS结合进行大区域森林地上生物量估测的可靠性。 相似文献
14.
结合机载LiDAR数据,提出了一种改进的GLAS光斑点冠层高度地形校正模型,以校正后的GLAS光斑点作为输入样本,结合MODIS遥感影像,利用支持向量回归（SVR）的方法对研究区森林冠层高度进行分生态区估测,并利用野外调查数据和机载LiDAR冠层高度结果对估测结果进行验证。结果显示:研究区的坡度等级直接影响GLAS光斑点森林冠层高度估测精度,改进的地形校正模型可以较好的减小坡度对GLAS光斑点森林冠层高度估测的影响,模型精度RMSE稳定在3.25~3.48 m;不同生态分区的SVR模型估测精度较为稳定,其RMSE=6.41~7.56 m;与算数平均高相比,样地的Lorey's高与制图结果拟合最好,不同生态分区平均估测精度为80.3%。机载LiDAR冠层高度结果的验证平均精度为79.5%,和Lorey's高验证结果呈现较好的一致性。 相似文献
15.
Forest plantations are an important source of terrestrial carbon sequestration. The forest of Robinia pseudoacacia in the Yellow River Delta (YRD) is the largest artificial ecological protection forest in China. However, more than half of the forest has appeared different degrees of dieback and even death since the 1990s. Timely and accurate estimation of the forest aboveground biomass (AGB) is a basis for studying the carbon cycle of forests. Light Detecting and Ranging (LiDAR) has been proved to be one of the most powerful methods for forest biomass estimation. However, because of an irregular and overlapping shape of the broadleaved forest canopy in a growing season, it is difficult to segment individual trees and estimate the tree biomass from airborne LiDAR data. In this study, a new method was proposed to solve this problem of individual tree detection in the Robinia pseudoacacia forest based on a combination of the Unmanned Aerial Vehicle-Light Detecting and Ranging (UAV-LiDAR) with the Backpack-LiDAR. The proposed method mainly consists of following steps: (i) at a plot level, trees in the UAV-LiDAR data were detected by seed points obtained by an individual tree segmentation (ITS) method from the Backpack-LiDAR data; (ii) height and diameter at breast height (DBH) of an individual tree would be extracted from UAV and Backpack LiDAR data, respectively; (iii) the individual tree AGB would be calculated through an allometric equation and the forest AGB at the plot level was accumulated; and (iv) the plot-level forest AGB was taken as a dependent variable, and various metrics extracted from UAV-LiDAR point cloud data as independent variables to estimate forest AGB distribution in the study area by using both multiple linear regression (MLR) and random forest (RF) models. The results demonstrate that: (1) the seed points extracted from Backpack-LiDAR could significantly improve the overall accuracy of individual tree detection (F = 0.99), and thus increase the forest AGB estimation accuracy; (2) compared with MLR model, the RF model led to a higher estimation accuracy (p < 0.05); and (3) LiDAR intensity information selected by both MLR and RF models and laser penetration rate (LP) played an important role in estimating healthy forest AGB. 相似文献
16.
Forest degradation is a global phenomenon and while being an important indicator and precursor to further forest loss, carbon emissions due to degradation should also be accounted for in national reporting within the frame of UN REDD+. At regional to country scales, methods have been progressively developed to detect and map forest degradation, with these based on multi-resolution optical, synthetic aperture radar (SAR) and/or LiDAR data. However, there is no one single method that can be applied to monitor forest degradation, largely due to the specific nature of the degradation type or process and the timeframe over which it is observed. The review assesses two main approaches to monitoring forest degradation: first, where detection is indicated by a change in canopy cover or proxies, and second, the quantification of loss (or gain) in above ground biomass (AGB). The discussion only considers degradation that has a visible impact on the forest canopy and is thus detectable by remote sensing. The first approach encompasses methods that characterise the type of degradation and track disturbance, detect gaps in, and fragmentation of, the forest canopy, and proxies that provide evidence of forestry activity. Progress in these topics has seen the extension of methods to higher resolution (both spatial and temporal) data to better capture the disturbance signal, distinguish degraded and intact forest, and monitor regrowth. Improvements in the reliability of mapping methods are anticipated by SAR-optical data fusion and use of very high resolution data. The second approach exploits EO sensors with known sensitivity to forest structure and biomass and discusses monitoring efforts using repeat LiDAR and SAR data. There has been progress in the capacity to discriminate forest age and growth stage using data fusion methods and LiDAR height metrics. Interferometric SAR and LiDAR have found new application in linking forest structure change to degradation in tropical forests. Estimates of AGB change have been demonstrated at national level using SAR and LiDAR-assisted approaches. Future improvements are anticipated with the availability of next generation LiDAR sensors. Improved access to relevant satellite data and best available methods are key to operational forest degradation monitoring. Countries will need to prioritise their monitoring efforts depending on the significance of the degradation, balanced against available resources. A better understanding of the drivers and impacts of degradation will help guide monitoring and restoration efforts. Ultimately we want to restore ecosystem service and function in degraded forests before the change is irreversible. 相似文献
17.
中国南方森林冠顶高度Lidar反演—以江西省为例 总被引：1，自引：0，他引：1
激光雷达(Lidar)与光学遥感的有效结合对中国南方区域森林冠顶高度反演意义重大,而国产卫星将为中国森林生态研究提供新的数据源。本文联合利用大脚印激光雷达GLA和国产MERSI数据,在实现GLAS波形数据处理和不同地形条件下森林冠顶高度反演算法基础上,建立了区域尺度不同森林类型林分冠顶高度GLAS+MERSI联合反演关系模型,进行了江西地区森林冠顶高度反演。总体上,GLAS激光雷达森林冠顶高度估算精度较高;且在与MERSI 250 m数据的联合反演模型中,针叶林模型精度较好(R2=0.7325);阔叶林次之(R2=0.6095);混交林较差(R2=0.4068)。分析发现,考虑了光学遥感生物物理参数的GLAS+MERSI联合关系模型在区域森林冠顶高度估算中有较高精度,且在空间分布上与土地覆盖数据分布特征非常一致。 相似文献
18.
森林地上生物量的极化相干层析估计方法 总被引：2，自引：1，他引：1
基于微波的后向散射系数估计森林地上生物量(AGB)易受后向散射系数饱和的影响,而利用森林高度,根据生长方程估计AGB,却没有考虑和AGB密切相关的林分密度、树种组成、林层垂直分布等空间结构特征的作用,针对这些问题,提出一种基于极化相干层析(Polarization Coherence Tomography,PCT)技术的AGB估计方法。基于德国宇航局(DLR)机载SAR系统(ESAR)获取的特劳斯坦(Traunstein)试验区L-波段极化干涉SAR(PolInSAR)数据,通过对具有不同AGB水平的典型林分的相对反射率函数曲线的分析,定义了9个与AGB具有相关性的特征参数。然后基于20个林分的实测AGB数据,以林分尺度上这9个特征参数的平均值为自变量,以实测林分平均AGB为因变量,采用逐步回归分析法构建了AGB估测模型,并对该模型进行评价,对影响模型估计精度的因素进行分析,结果表明,由PCT提取的相对反射率函数特征参数对AGB很敏感,充分利用相对反射率函数信息可提高AGB估计精度。 相似文献