共查询到20条相似文献，搜索用时 31 毫秒
1.
The prediction of ship stability during the early stages of design is very important from the point of vessel’s safety. Out of the six motions of a ship, the critical motion leading to capsize of a vessel is the rolling motion. In the present study, particular attention is paid to the performance of a ship in beam sea. The linear ship response in waves is evaluated using strip theory. Critical condition in the rolling motion of a ship is when it is subjected to synchronous beam waves. In this paper, a nonlinear approach has been tried to predict the roll response of a vessel. Various representations of damping and restoring terms found in the literature are investigated. A parametric investigation is undertaken to identify the effect of a number of key parameters like wave amplitude, wave frequency, metacentric height, etc. 相似文献
2.
The use of wavelet transforms is explored to investigate the nonlinear dynamical characteristics of ship roll and coupled heave-roll motion. The harmonic character, double period character and chaotic character are observed via a time–frequency window of the wavelet transform. Typical wave parameters in different stability regions are considered. Features such as restoring rolling, divergence rolling, steady state and chaotic responses of ship roll are obtained as well. The investigation in this paper not only highlights the feasibility of using wavelet transforms in the analysis of nonlinear dynamic characteristics of ship rolling in waves, but also shows how it could enhance the analysis abilities. 相似文献
3.
M. Taylan 《Ocean Engineering》1999,26(11):255
Mathematical modeling of the nonlinear roll motion of ships is one subject widely dealt with in nonlinear ship dynamics. This paper investigates setting up a form of nonlinear roll motion model and developing its periodic solution by the generalized Krylov–Bogoliubov asymptotic method in the time domain. In this model, nonlinearities are introduced through damping and restoring terms. The restoring term is approximated as a third-order odd polynomial whereas the quadratic term is favored to represent the nonlinear damping. The ship is assumed to be under the influence of a sinusoidal exciting force. Although the method is expressible to contain any order of the perturbing term, a single degree is chosen to avoid cumbersome mathematical complexity. In order to improve the solution a first-order correction term is also included. Moreover, a numerical example is carried out for a small vessel in order to validate the solution scheme. 相似文献
4.
5.
Application of the extended Melnikov's method for single-degree-of-freedom vessel roll motion 总被引：2，自引：0，他引：2
Traditionally, when using Melnikov's method to analyze ship motions, the damping terms are treated as small. This is typically true for roll motion but not always true for other and/or multiple degrees of freedom. In order to apply Melnikov's method to other and/or multiple-degree-of-freedom motions, the small damping assumption must be addressed. In this paper, the extended Melnikov method is used to analyze ship motion without the constraint of small linear damping. Two roll motion models are analyzed here. One is a simple roll model with nonlinear damping and cubic restoring moment. The other is the model with biased restoring moment. Numerical simulations are investigated for both models. The effectiveness and accuracy of this method is demonstrated. 相似文献
6.
This paper has shown a numerical motion simulation method which can be employed to study on parametric rolling of ships in a seaway. The method takes account of the main nonlinear terms in the rolling equation which stabilize parametric rolling, including the nonlinear shape of the righting arm curve, nonlinear damping and cross coupling among all 6 degrees of freedom. For the heave, pitch, sway and yaw motions, the method uses response amplitude operators determined by means of the strip method, whereas the roll and surge motions of the ship are simulated, using nonlinear motion equations coupled with the other 4 degrees of freedom. For computing righting arms in seaways, Grim's effective wave concept is used. Using these transfer functions of effective wave together with the heave and pitch transfer functions, the mean ship immersion, its trim and the effective regular wave height are computed for every time step during the simulation. The righting arm is interpolated from tables, computed before starting the simulation, depending on these three quantities and the heel angle. The nonlinear damping moment and the effect of bilge keels are also taken into account. The numerical simulation tool has shown to be able to model the basic mechanism of parametric rolling motions. Some main characteristics of parametric rolling of ships in a seaway can be good reproduced by means of the method. Comprehensive parametric analyses on parametric rolling amplitude in regular waves have been carried out, with that the complicated parametric rolling phenomena can be understood better. 相似文献
7.
In order to predict the roll motion of a floating structure in irregular waves accurately, it is crucial to estimate the unknown damping coefficients and restoring moment coefficients in the nonlinear roll motion equation. In this paper, a parameter identification method based on a combination of random decrement technique and support vector regression (SVR) is proposed to identify the coefficients in the roll motion equation of a floating structure by using the measured roll response in irregular waves. Case studies based on the simulation data and model test data respectively are designed to validate the applicability and validity of the identification method. Firstly, the roll motion of a vessel is simulated by using the known coefficients from literature, and the simulated data are used to identify the coefficients in the roll motion equation. The identified coefficients are compared with the known values to validate the applicability of the identification method. Then the roll motion is predicted by using the identified coefficients. The prediction results are compared with the simulated data, and good agreement is achieved. Secondly, the model test data of a FPSO are used to identify the coefficients in the roll motion equation. Then the random decrement signature of the roll motion is predicted by using the identified coefficients and compared with that obtained from the model test data, and satisfactory agreement is achieved. From this study, it is shown that the identification method can be effectively applied to identify the coefficients in the nonlinear roll motion equation in irregular waves. 相似文献
8.
规则波中船舶复原力和参数横摇研究 总被引：1，自引：1，他引：0
为研究规则波中船舶复原力变化规律及其对参数横摇的影响,首先,基于切片理论求解出船舶无横倾时在波浪中时间序列垂荡和纵摇运动,确定出波面与船体的相对位置;其次,利用三个坐标系之间的转换关系进而确定规则波中船体各横剖面左右舷与波面瞬时交点,求得各浸水剖面面积;然后对波浪压力沿船长湿表面积分,得出规则波中船舶复原力的Froude-Krylov部分。同时,利用作用在横倾船舶上的辐射力和绕射力,求出规则波中船舶复原力辐射力和绕射力部分。在复原力计算的基础上,确定一个参数横摇模型,实现波浪中参数横摇计算。以一艘集装箱船为例,研究了规则波中复原力变化以及参数横摇规律,复原力变化幅度是影响参数横摇的一个重要因素。 相似文献
9.
The best way of reducing roll motion is by increasing roll damping. Bilge keels are the most common devices for increasing roll damping. If more control is required, anti-roll tanks and fins are used. Tanks have the advantage of being able to function when the ship is not underway. Our objective is to develop design procedures for passive tanks for roll reduction in rough seas. This paper focuses on the design of passive U-tube tanks. The tank-liquid equation of motion is integrated simultaneously with the six-degree-of-freedom (6DOF) equations of the ship motion. The coupled set of equations is solved by using the Large Amplitude Motion Program ‘LAMP’, which is a three-dimensional time-domain simulation of the motion of ships in waves. The unstabilized and stabilized roll motions of a S60-70 ship with forward speed and beam waves have been analyzed. For high-amplitude waves, the unstabilized roll angle exhibits typical nonlinear phenomena: a shift in the resonance frequency, multi-valued responses, and jumps. The performance of a S60-70 ship with a passive tank is investigated in various sea states with different encounter wave directions. It is found that passive anti-roll tanks tuned in the linear or nonlinear ranges are very effective in reducing the roll motion in the nonlinear range. The effect of the tank damping, frequency, and mass on the tank performance is studied. Also, it is found that passive anti-roll tanks are very effective in reducing the roll motion for ships having a pitch frequency that is nearly twice the roll frequency in sea states 5 and 6. 相似文献
10.
The paper studies the parametric stochastic roll motion in the random waves. The differential equation of the ship parametric roll under random wave is established with considering the nonlinear damping and ship speed. Random sea surface is treated as a narrow-band stochastic process, and the stochastic parametric excitation is studied based on the effective wave theory. The nonlinear restored arm function obtained from the numerical simulation is expressed as the approximate analytic function. By using the stochastic averaging method, the differential equation of motion is transformed into Ito's stochastic differential equation. The steady-state probability density function of roll motion is obtained, and the results are validated with the numerical simulation and model test. 相似文献
11.
A partly non-linear time-domain numerical model is used for the prediction of parametric roll resonance in regular waves. The ship is assumed to be a system with four degrees of freedom, namely, sway, heave, roll and pitch. The non-linear incident wave and hydrostatic restoring forces/moments are evaluated considering the instantaneous wetted surface whereas the hydrodynamic forces and moments, including diffraction, are expressed in terms of convolution integrals based on the mean wetted surface. The model also accounts for non-potential roll damping expressed in an equivalent linearised form. Finally, the coupled equations of motion are solved in the time-domain referenced to a body fixed axis system.This method is applied to a range of hull forms, a post-Panamax C11 class containership, a transom stern Trawler and the ITTC-A1 containership, all travelling in regular waves. Obtained results are validated by comparison with numerical/experimental data available in the literature. A thorough investigation into the influence of the inclusion of sway motion is conducted. In addition, for the ITTC-A1 containership, an investigation is carried out into the influence of tuning the numerical model by modifying the numerical roll added inertia to match that obtained from roll decay curves. 相似文献
12.
The large roll motion of ships sailing in the seaway is undesirable because it may lead to the seasickness of crew and unsafety of vessels and cargoes, thus it needs to be reduced. The aim of this study is to design a rudder roll stabilization system based on Radial Basis Function Neural Network (RBFNN) control algorithm for ship advancing in the seaway only through rudder actions. In the proposed stabilization system, the course keeping controller and the roll damping controller were accomplished by utilizing modified Unscented Kalman Filter (UKF) training algorithm, and implemented in parallel to maintain the orientation and reduce roll motion simultaneously. The nonlinear mathematical model, which includes manoeuvring characteristics and wave disturbances, was adopted to analyse ship’s responses. Various sailing states and the external wave disturbances were considered to validate the performance and robustness of the proposed roll stabilizer. The results indicate that the designed control system performs better than the Back Propagation (BP) neural networks based control system and conventional Proportional-Derivative (PD) based control system in terms of reducing roll motion for ship in waves. 相似文献
13.
The purpose of this paper is to identify the functional form of the nonlinear roll damping for a particular ship based on an experiment. The problem of damping identification is formulated as an integral equation of the first kind. However, the solution of the problem lacks stability properties, due to the ill-posedness of the first-kind integral equation. To resolve this problem, a stabilization technique (known as a regularization method) is applied to the present problem of the identification of nonlinear damping. The identified results for nonlinear roll dampings are compared with those from a conventional roll identification method. The findings of the present study are validated by the direct comparison of experimental data on free-roll decay motion with the numerically simulated results. 相似文献
14.
Since the most severe roll motion occurs at resonance (known as synchronous rolling), the best way of reducing it is to increase the damping. The most common means of doing so is by the installation of bilge keels. If more control is required, both anti-roll tanks and fins are used. Tanks have the advantage of being able to function when the ship is not underway. The use of tanks with liquid free surfaces for reducing roll motion of ships is an old idea. Many researchers have studied the design of anti-roll tanks. However, most of the past effort has concentrated on studying the performance of anti-roll tanks in damping the roll motion of the ship. Little attention has been paid to the fluid motion inside the tank itself. Another important issue is the tank tuning. Proper tuning of the anti-roll tank, to match the ship's natural frequency, is very important in reducing the roll motion. This paper concentrates on the most familiar type, which is the U-tube passive tank as a mechanical absorber of roll motion. A detailed study, covering tank damping, mass, location relative to the ship CG, and tuning, is presented. New suggestions and observations are stated concerning tank damping and tuning. 相似文献
15.
Head-wave parametric rolling of a surface combatant 总被引：1，自引：0，他引：1
Hamid Sadat-Hosseini Angelo Olivieri Hirotada Hashimoto Gabriele Bulian 《Ocean Engineering》2010,37(10):859-878
Complementary CFD, towing tank EFD, and nonlinear dynamics approach study of parametric roll for the ONR Tumblehome surface combatant both with and without bilge keels is presented. The investigations without bilge keels include a wide range of conditions. CFD closely agrees with EFD for resistance, sinkage, and trim except for Fr>0.5 which may be due to free surface and/or turbulence modeling. CFD shows fairly close agreement with EFD for forward-speed roll decay in calm water, although damping is over/under predicted for largest/smaller GM. Most importantly CFD shows remarkably close agreement with EFD for forward-speed parametric roll in head waves for GM=0.038 and 0.033 m, although CFD predicts larger instability zones at high and low Fr, respectively. The CFD and EFD results are analyzed with consideration ship motion theory and compared with Mathieu equation and nonlinear dynamics approaches. Nonlinear dynamics approaches are in qualitative agreement with CFD and EFD. The CFD and nonlinear dynamics approach results were blind in that the actual EFD radius of gyration kxx was not known a priori. 相似文献
16.
In this paper our previously developed advanced system identification technique [1] has been applied to extract the frequency dependent roll damping from a series of model tests run in irregular (random) waves. It is shown that this methodology accurately models the roll damping which can then be used to produce accurate predictions of the ships roll motion. These roll motion predictions are not only more accurate than the potential flow predictions but more accurate than potential flow models corrected using either empirical prediction methods [2] and even those corrected using roll damping obtained from free decay sallying experiments. This methodology has the potential to significantly improve roll motion prediction during full scale at sea trails of vessels in order to dramatically improve safety of critical operations such as helicopter landing or ship to ship cargo transfer. 相似文献
17.
It is well known in the field of marine hydrodynamics that the added mass, damping and wave exciting forces are functions of frequency (Newman, 1977. Marine Hydrodynamics. MIT Press, Cambridge). Although most previous studies of nonlinear ship rolling motion have assumed that these forces do not vary with frequency, in this study the frequency dependent added mass and damping coefficients are approximated in the time domain with extended state space variables. Using numerical time simulation (integration), the extended state space model is compared to the constant coefficient model with a constant frequency forcing and the results for two constant value approximations of the added mass and damping are compared to the extended state space model with a multiple component pseudo random forcing. 相似文献
18.
The present paper describes a mathematical model in which the fluid motion inside a U-tank is nonlinearly coupled to the heave, roll and pitch motions of the ship. The main purpose of the investigation is centred on the control of roll motion in the case of parametric resonance in longitudinal waves. A transom stern small vessel, known to be quite prone to parametric amplification, is employed in the study. Four tank designs are employed in order to study the influence of tank mass, tank natural frequency and tank internal damping on the control of parametric rolling at different head seas conditions. Additionally, the influence of the vertical position of the tank is also investigated. The main results are presented in the form of limits of stability, with encounter frequency and wave amplitudes as parameters. Distinct dynamical characteristics are discussed and conclusions are drawn on the relevant parameters for the efficient control of the roll amplifications in head seas. 相似文献
19.
20.
The purpose of this paper is to analyze the nonlinear ship roll motion equation and the main parameters that induce ship capsizing in beam seas, estimate the survival probability of a ferry in random seas and to find out a risk assessment method for the ship’s intact stability. A single degree of freedom (1-DOF) dynamic system of ship rolling in beam seas is investigated and the nonlinear differential equation is solved in the time domain by the fourth order Runge-Kutta algorithm. The survival probability of a ferry in beam seas is investigated using the theory of “safe basin”. The survival probability is calculated by estimating erosion of “safe basin” during ship rolling motion by Monte Carlo simulations. From the results it can be concluded that the survival probability of a ship in beam sea condition can be predicted by combining Monte Carlo simulations and the theory of “safe basin”. 相似文献