共查询到20条相似文献,搜索用时 117 毫秒
1.
随着GPS定位技术的不断发展,GPS定位技术已被广泛用于各种工程控制网的建立.本文针对具体项目探讨了小区域内GPS控制网的建立、外业数据的采集和内业数据的处理,并对控制网质量进行了精度分析. 相似文献
2.
随着北斗系统的发展,北斗高精度定位技术应用于变形监测以及大型建筑物、构筑物的动态自动化监测方面展现出了巨大的优势.本文基于北斗和GPS双频载波相位数据处理的组合定位方法,并采用实验数据分析了北斗和GPS卫星可见数、DOP值和数据质量,通过解算建筑物变形监测实测数据对比分析了北斗、GPS及其组合系统定位结果的精度.结果表... 相似文献
3.
4.
介绍了咸宁核电厂次级网设计的原则及实施过程中的注意事项,分析了采用GPS静态定位方式下的数据观测、数据处理控制方法,对GPS基线边长质量控制采用高精度全站仪进行了边长观测比较分析。 相似文献
5.
目前我国北斗导航系统已经完成第二阶段区域系统的建设,利用北斗导航定位技术进行桥梁变形监测是今后发展的必然趋势。本文分析了北斗定位技术在桥梁变形监测中的的优势,并与GPS定位技术作对比分析,结果表明:在监测区域内,北斗二号的可见卫星数要略多于GPS可见卫星数,卫星几何精度因子略低于GPS,数据质量与GPS相当,相对定位精度略优于GPS,平面定位精度在1~2 cm,水平定位精度在5~6 cm。 相似文献
6.
GPS RTK技术的误差分析及质量控制 总被引:3,自引:0,他引:3
本文从分析GPS RTK技术的各项误差来源出发,通过采取措施提高RTK定位的精度,从而加强质量控制,采用GPS RTK定位技术的精度及效率在工程中得到验证。 相似文献
7.
8.
9.
10.
介绍了GPS与BDS系统的时间基准和空间基准统一,以及GPS与BDS融合相对定位的数学模型。基于双差伪距和载波相位两种相对定位方式,对GPS与BDS融合相对定位算法进行了研究,并利用自编的软件处理了实测的GPS与BDS数据,验证了本文算法和软件的有效性。最后在GPS、BDS、GPS与BDS融合3种定位模式下,对定位精度进行了分析和比较,得出了一些有益的结论。本文的研究结果可为GPS与BDS融合相对定位提供参考。 相似文献
11.
地理国情普查项目是全新的测绘地理信息项目,文章结合生产阶段及检查验收过程中地表覆盖数据生产容易出现的质量问题,通过认真分析影响质量的因素,从管理要素、生产过程、两级检查3个方面谈了解决该问题的部分质量控制措施,以便于更好地提高地理国情普查项目成果的质量。 相似文献
12.
基于GIS技术的土地评价研究进展 总被引:4,自引:0,他引:4
土地评价是指在特定目的下对土地质量进行的鉴定,是将土地条件与土地利用要求匹配的过程,是土地资源调查和研究中的
一项核心工作,为后续土地资源规划、开发、利用、治理和保护奠定基础。地理信息系统(GIS)是近几十年发展起来的信息技术
,具有强大的空间数据存储与分析功能,促进了土地评价的研究与应用。本文在回顾土地评价研究历史的基础上,对GIS支持下的
土地评价研究进展进行综述,并提出今后可能的发展方向。 相似文献
13.
陈文彬 《测绘与空间地理信息》2015,(6)
地图编辑准备工作是地图生产的第一阶段,其任务是进行整个地图生产过程的准备工作,在收集、分析和选择基本资料,并进行制图区域的地理特点研究和必要的科学实验的基础上,拟定组织和实施地图生产全部工作的指导性"技术文件"。保证生产出内容完备、现实性强、质量好的地图。 相似文献
14.
15.
基于缓冲区分析的城市化与地表水质关系研究——以烟台沿海区县为例 总被引:5,自引:0,他引:5
将城市化过程中的人为土地定义为建设用地,利用2004年TM影像得到烟台沿海区县建设用地数据。用缓冲区分析提取乡镇水平上建设用地比率和人口密度数据,缓冲半径从100m到2000m,利用ArcView空间分析功能对建设用地比率、人口密度、河网等级和水质进行叠置分析,并结合逐步回归分析方法揭示烟台沿海区县28个水质监测站各水质参量的空间变化情况。结果显示,通过建设用地比率和人口密度共同作用可以解释85%以上的水质参量模型,反映城市化的建设用地比率比人口密度能更好地解释水质参量的空间变化,大多数水质参量的最佳模型出现在2000m的缓冲半径上,表明建设用地比率和人口密度是影响研究区域水质的首要因素。同时,运用缓冲区分析等GIS空间分析方法为区域城市化进程与水环境质量的研究提供了新的途径。 相似文献
16.
17.
One of the first stages of the three‐dimensional (3D) subsurface modeling process involves collation and analysis of available borehole and/or outcrop data to identify individual subsurface units, usually distinguished by the grain size of the sediment, and the elevation of their bounding contacts. Input data can come from a variety of sources and may be categorized according to their reliability and/or quality. The output from the 3D model is a prediction of subsurface conditions based on these data and the reliability of the output model is highly dependent on both the quality of input data and the types of interpolation methods used. This article presents a new quality weighting methodology that allows the user to assign a differential weighting factor to data points of variable quality in the modeling process. Input data are categorized into high and low quality datasets which are then recombined using a grid math process in which a differential “weighting” factor is applied. This allows the 3D modeling program to maximize the use and effectiveness of data from all available sources while giving high quality data greater influence on the final model output, and will result in the generation of more accurate and reliable 3D subsurface models. 相似文献
18.
19.
Quality Assessment of Cartographic Generalisation 总被引:2,自引:1,他引:2
Sylvain Bard 《Transactions in GIS》2004,8(1):63-81
This paper proposes a methodology to assess the quality of cartographic generalisa‐tion, which consists of representing geographic space in a simplified way according to the scale and the objectives of the intended map. The automation of this process makes the derivation of data easier, but the quality of the results is often not evaluated. This paper proposes an assessment model based on: (1) characterisation of the data in their initial and final states at different levels of analysis; (2) a data quality assessment by comparison of the two characterisations; and (3) aggregation of the various assessment results to summarise data quality. The assessment algorithm has been implemented and the method has been tested to assess the generalisation of a small urban area. A visualisation tool for assessment of the results has been developed to validate the generalisation evaluation. The results of the research are presented and discussed at the end of the paper. 相似文献
20.
Earth observation optical images may contain blemishes or artificial structures that come from processing or directly from the sensors. These artifacts decrease the quality of the images and can lead to analysis and interpretation problems. We are interested in detecting these defects automatically. We develop an approach based on an information-theoretic analysis of the image formation process, which is inspired by methods already used in domains dealing with similar problematics like image quality or information hiding. In this letter, we propose a method based on a rate distortion analysis, exploiting the local regularity properties of the image. 相似文献